Hi, last week I tried to install a google apps rom in my lenovo, when I want to turn on the phone it doesn't work, I try to enter in recovery or fastboot but the phone doesn't enter and only it stays in lenovo brand , somebody knows some soluton?, thanks.
castillofcoj said:
Hi, last week I tried to install a google apps rom in my lenovo, when I want to turn on the phone it doesn't work, I try to enter in recovery or fastboot but the phone doesn't enter and only it stays in lenovo brand , somebody knows some soluton?, thanks.
Click to expand...
Click to collapse
you have to flash your phone using QPST
Look for some tutorials on the net
Does it get recognized by the computer? If it does you can flash it, like dreigosh said.
Related
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp
i flash [UNOFFICIAL][7.1]CyanogenMod 14.1[TOMATO][VOLTE] in my yureka plus.....then it goes in boot loop.after i Wipe cache / dalvik cache / data / system...... using twrp and try other rom like..... MIFavor V3.5 with Full VoLTE axis for yureka ,then cm-12.1-YOG4PAS3JM-tomato-signed but every time it goes to boot loop.....so i change my twrp and format my all data include my phone memory and try flash rom but not solve the problem.
plzzz help me.....what i do because my phone not working.
Just flash cm12.1 by fastboot method.
Same problem here
i tried flashing cm12.1 also but doesn't stop looping
please help if anyone has solved this problem
Use charger while booting. It seems strange but still it works for me.
First factory reset your phone by going into recovery,then wipe cache/partition,then try flashing cm 12.1 by fastboot method.Download the ROM at
https://drive.google.com/file/d/0B_aCRdb2PZn7ajl1N25WZjV5LTg/view?pli=1 and connect your phone with PC in fastboot mode.Then run flash file in the given files.(extract all files in one folder).Hope this works.Thanks
chinmay888 said:
Just flash cm12.1 by fastboot method.
Click to expand...
Click to collapse
i also stuck in the same problem please provide solution if there
girish8193 said:
i also stuck in the same problem please provide solution if there
Click to expand...
Click to collapse
Flash cm 12.1 by fastboot
i had a friend's yureka with bootloop on YU logo,i flashed it using adb fastboot,the phone started vibrating and dint even turned on,only goes to fastboot mode after long pressing volume up and shows red light on connection.I also tried emmc image burning on sd card method but still in same condition.Please help
iamtj said:
i had a friend's yureka with bootloop on YU logo,i flashed it using adb fastboot,the phone started vibrating and dint even turned on,only goes to fastboot mode after long pressing volume up and shows red light on connection.I also tried emmc image burning on sd card method but still in same condition.Please help
Click to expand...
Click to collapse
Its easy to recover just download telegram and search me my username is @chinmay888.I will tell u step by step to recover.Because its more convenient on it.
chinmay888 said:
Its easy to recover just download telegram and search me my username is @chinmay888.I will tell u step by step to recover.Because its more convenient on it.
Click to expand...
Click to collapse
ok i'll contact u
Ok so here is what happened. I tried installing a custom recovery on my yureka plus and I flashed the file using an android app called rashr. By mistake I chose flash as recovery and then whenever I would switch on my phone it would boot up into fastboot mode. I watched a YouTube video o how to fix my phone stuck in a bootloop and followed all instructions. After that when I tried to turn on my phone it actually went into a bootloop and as if that wasn't enough it also does not display the logo properly. Instead I am seeing coloured bars on my phone even when I boot it into recovery or fastboot mode. How do I fix this?
If you have Yureka Plus COS variant than flash COS12.1 factory image from fastboot.
saurav007 said:
If you have Yureka Plus COS variant than flash COS12.1 factory image from fastboot.
Click to expand...
Click to collapse
If the phone is in warrenty, show it to customer care
Rooting doesn't woid Yureka's warranty
My phone was also showing blue lines and orange colour bars, random reboots, heating issues
Service center swapped my phone!
me too
chinmay888 said:
Its easy to recover just download telegram and search me my username is @chinmay888.I will tell u step by step to recover.Because its more convenient on it.
Click to expand...
Click to collapse
;
Want to sell Dead You Yureka ?
Guys if anyone want to sell your dead Yu Yureka.. I will buy even if it is hardbricked and its getting detected as HSUSB-BULK or Qualcomm QDLoader in the computer..:good:
this repair will fix the loop permanently
https://www.youtube.com/watch?v=Q60ZkevoESc
https://www.youtube.com/watch?v=Q60ZkevoESc&t=39s
This video will help in fixing the bootloop without changing a battery
help me sharing this video
Hi, can someone help me ?
I'm user Letv 1 Pro (CN) and my phone cant enter the fastboot mode
I want to install twrp for root and change my rom
I have follow some tutorial, but it won't work to my phone, my phone is back turn on after penguin logo just for 5 secs, and it back again to turn on and wont start fastboot mode (no brick)
or it because I'm not enter my Letv account ?
sorry for my english, thanks
I'm having the same problem.
My phone was not like that before. Previously I entered fastboot, installed twrp and did other things.
Maybe it's the new stable version of the stock rom. They must have tweaked it to prevent users from using the fastboot mode.
Can someone help me with this.
Hi all! I ask your help! I have Moto z2 Force on 8.0 Oreo and I installed custom recovery twrp-3.2.1-1-nash.img and foolishly chose Slot-B and then I reboot the phone. Now when connected to a computer, it is defined as Qualcomm HS-USB QDLoader 9008 . How can I bring it back to life?! Help please! :crying:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
yakutza said:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
Click to expand...
Click to collapse
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
PoisonDash2 said:
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
Click to expand...
Click to collapse
This happened to me on t-mobile yesterday and I managed to solve it by downloading this: (T-Mobile only) https://drive.google.com/file/d/1fM5KLheeMYcs3yF7InOzHq6yGCOmrrbk/view
Extract the zip and while your phone is connected to your pc and booted in bootloader mode, run flash_all.bat, boot (don't flash) TWRP, install TWRP with the TWRP zip found here: https://dl.twrp.me/nash/twrp-installer-nash-3.2.1-1.zip.html
Then reboot to your newly installed TWRP recovery, factory reset, flash rom, reboot bootloader and run "fastboot -w".
After that you should boot up fine. Fastboot -w might not be necessary but I had to do it, otherwise I would boot but I would get an error message "android.process.media has stopped" without it.
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Will71000 said:
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Click to expand...
Click to collapse
If its get detect as QHUSB_BULK in conputer and installing Qualcomm drivers get it to Qh_usbloader 9008 under COMports then theres no way ti revive ur phone. Theres no Blank Flash files yet available for Moto Z2 Play
Hi, My xiaomi mi 5s is bootlooping and i tried to go recovery mode and he dosent go to it, i already went to fastboot and unlocked it but it stills the same, i used misuite but it dosent detect the phone, if i connect it on fast boot mode it shows "First try in normal mode", does anyone know how to solve the bootloop problem without the recovery mode flashboot, or know how to put them back to work ? i will be greatfull