Anybody purchase and receive theirs yet? Seemed to be the thinnest case I could find.
Sent from my 2PS64 using XDA-Developers mobile app
Mine should arrive either Tuesday or Wednesday...hopefully.
Sent from my HTC 10 using XDA-Developers mobile app
I have mine. I love it so far. My USB cover sticks out a little though
seanhassars said:
I have mine. I love it so far. My USB cover sticks out a little though
Click to expand...
Click to collapse
I hate it when they put USB covers cases as they always stick out.
Sent from my HTC 10 using XDA-Developers mobile app
I felt the same way, but I also have this case for my 5x and it sits perfectly flush
Mine should be here shortly too, ordered this one and the Imak clear.
The Imak fits nicely and looks good, just a bit of a sharp edges but nothing compared to the Spigen clear case.
I'll post some pictures here later
Iv been using it for a few weeks. it is very good, better than other tpu cases. very thin, perhaps too think for my liking. And it attracts fingerprints. Personally i would go for a Spigen Hybrid, however for the price its very good.
cammera?
Have any off you taken some pictures at night with flash and case on. on my m9 a hade glare on the pictures from the case being to near the flash.
Anyone?
zorantoma said:
Have any off you taken some pictures at night with flash and case on. on my m9 a hade glare on the pictures from the case being to near the flash.
Anyone?
Click to expand...
Click to collapse
I'll test this tonight for you
seanhassars said:
I'll test this tonight for you
Click to expand...
Click to collapse
That would be great. Could you make the same picture with and without the case?
Thank you
zorantoma said:
That would be great. Could you make the same picture with and without the case?
Thank you
Click to expand...
Click to collapse
Or a youtube video :good:
My Spigen Ultra Hybrid has flash glare. Is there any clear case right now that doesn't? Along with not having a stupid top cutout for the non-existent IR blaster?
Edit: Just noticed on Amazon the Spigen Ultra Hybrid has been redesigned according to their product pics.
Amazon link
mosincredible said:
My Spigen Ultra Hybrid has flash glare. Is there any clear case right now that doesn't? Along with not having a stupid top cutout for the non-existent IR blaster?
Edit: Just noticed on Amazon the Spigen Ultra Hybrid has been redesigned according to their product pics.
Amazon link
Click to expand...
Click to collapse
I have found some interesting TPU covers for the 10 on aliexpress, called ''frosted'' which should fix the fingerprint magnet problem, I am thinking of ordering one to try, and get a Nillking Nature now while waiting for it (it can take up to 6 weeks), though I dunno if it's better to take the white or brown frost color for the grey 10...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jumaaneface said:
Anybody purchase and receive theirs yet? Seemed to be the thinnest case I could find.
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
link or a pic or both?
SacredDeviL666 said:
link or a pic or both?
Click to expand...
Click to collapse
https://www.amazon.com/gp/aw/d/B01FQNPSCU/ref=ya_st_dp_summary#
Bought a Nillkin Nature transparent for my 10, it's really good, it's a high quality TPU not the cheap oily one, everything is protected : buttons,corners,sides,camera... I also like the fact that it's 1mm elevated above the screen so you can put it face down on flat surfaces and Cardboard VR
The whole case is very thin and very transparent showing the beauty of the 10, holds well in the hand with anti-slip texture on the sides.
What I didn't like though is the USB protection and anti-slip textures that can feel a bit harsh.
I hope it won't get ugly after a while like many other TPU covers (scratches)
Got the case a few days ago, fits nicely, is flexible and covers a bit better than the Imak clear case.
Also is the thinnest I've found so far. The cutouts are properly aligned and there's no sharp edges like on the Spigen or Imak.
Not so fond of the branding on the back but it is pretty subtle.
Fits nicely, covers the USB-C port, you can like it or not, so far I'm not unhappy with it and it protects from dust and debris getting in there.
zorantoma said:
That would be great. Could you make the same picture with and without the case?
Thank you
Click to expand...
Click to collapse
sorry dudes, I forgot to do this. as promised though here are the pictures...I can't tell which is which without the labels so I'd say it's probably safe to say there's little to no glare
When I use the torch light app the cover upper sides light up like a Christmas tree but won't affect the light power of the torch
Related
Bought my case from here: http://www.ebay.ca/itm/330710065235...X:IT&_trksid=p3984.m1497.l2649#ht_3991wt_1185
They have different colors. I got the black one. Not bad for $12 with free shipping.
Took 14 days to arrive in Canada. Item actually shipped from Singapore and not Hong Kong (as it says on the ebay page)
Power button and volume rocker are easy to press. Although you wont feel any feedback from pressing these buttons. Typical of any TPU case.
As you can see, the TPU is textured for improved grip.
Rock Logo above the speaker cut out.
Protects the rear camera! No more worrying when laying your phone on any surface.
Front view with the phone. The TPU case extends all the way to the edge of the screen. You can put the phone face down on a table and it wouldnt touch the screen.
Rear view with the phone. You can still see the HTC logo and Beats Audio logo.
A closer look at the camera protection.
Cut outs are perfect for micro USB port, 3.5mm headphone jack and microphone. However, no cut out for the 5pin at the back.
Took the pic on a wrong angle. Cut out is actually perfect.
It comes with a free screen protector. Its not a perfect fit. The sides wont stick since the screen is curved.
Thanks for checking it out!
Been looking at these too. May treat myself. Thanks for the info
Sent from my HTC One X using Tapatalk 2
Very good Review and good pics!
Sent from my HTC One X using XDA Premium HD app
Just ordered a white one, for £6.55 , should have plenty of grip with all those nobbles.
Thanks.
EDIT : No need for a cut out for the 5 pin connector, it`s just about certain you could not use you phone in the dock with the case on anyway.
John.
http://www.ebay.co.uk/itm/Rock-TPU-..._MobilePhonesCasesPouches&hash=item35bb386075
Thanks for the review and all the pics, looks like a nice case for the price especially with the much needed protection for the camera lens.
Nice review, just what I was after. Cheers.
Ordered same few days ago, still waiting.
Good pictures mate and I agree its a fantastic case.
It is a touch harder then what I expected.
I purchased the clear, and on white from front and sides it hardly looks like a case, more like a halo or clear glow.
Took 9 days to arrive.
Thanks for the kind comments. I have another tpu case coming. I'll update my original post when it arrives.
Sent from my HTC One X using Tapatalk 2
maxseemo said:
Good pictures mate and I agree its a fantastic case.
It is a touch harder then what I expected.
I purchased the clear, and on white from front and sides it hardly looks like a case, more like a halo or clear glow.
Took 9 days to arrive.
Click to expand...
Click to collapse
You got the white one? I am planning to buy that - can you post some pics and the link where you got from.
Are you able to comment on the grippiness/rubberyness of this? I don't like rubbery feel to cases, I kind of want a hard case... but I also want something with better protection
Nice! Thanks !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Colours came out a bit funky using my dhd but the clear case doesn't mess too much with the look of the X.
From: ebaay
maxseemo said:
Colours came out a bit funky using my dhd but the clear case doesn't mess too much with the look of the X.
Click to expand...
Click to collapse
They don't advertise it as clear, but as "white" on their eBay page, I assume white = clear?
Love the white/clear Rock case. Might order another one for myself.
mattman83 said:
Are you able to comment on the grippiness/rubberyness of this? I don't like rubbery feel to cases, I kind of want a hard case... but I also want something with better protection
Click to expand...
Click to collapse
Grip is good, definitely gives a rubbery feel. Same as any tpu case I guess.
You wont get any better protection. Hard cases do not cover the top and bottom parts of the phone. Some even dont have lens protection.
Texan1 said:
They don't advertise it as clear, but as "white" on their eBay page, I assume white = clear?
Click to expand...
Click to collapse
Correct. White = Clear
i just bought one too. hope i won't take so long to arrive in germany
took the black one for my grey phone
Just ordered a white one. Any case that doesn't protect the face isn't worth buying imo.
Thanks for the review
I just ordered the black for my white One X, since it's clear it gives it a nice smoky look.
Ooops thanked you by accident with too many forum threads open, lol!
Hope you post photos now
People with the case, wanted to ask if you think the top front edge could be lower, by the camera?
In the photo you can see that the bottom edge curves round the front of the body further than the top.
Does this affect the protection at all? Basically I have a similar cheaper case but the front is a bit too high and does not protect the edge very well. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No branding. Buttons are dimples, work fine. Cutouts are perfect.
Mix of matte and gloss black.
TPU is tight and resistant to pulling off the edges of the screen.
Ordered late Friday night, got Monday morning.
http://www.amazon.com/Hyperion-Moto...id=1378838209&sr=8-1&keywords=hyperion+moto+x
Looks pretty good. Question: The amazon title says "and screen protector." This isn't a case with a built in screen protector, is it? I have a screen protector on mine already, so I don't need a case that has a screen protector built in, like an Otterbox or something. Just want a snap on case. So provided that it's just a case and a screen protector comes separately, how's the case fit regarding the screen? Does it seem like it'd interfere with a screen protector? Thanks
Screen protector is not part of the case. Just received this. Very nice
Awesome, thanks for the reply. Sold it for me, buying now
It just includes a cheapo plastic stickon protector.
The edge that wraps around the front is small, shouldnt interfere with any normal screen protectors.
You also have the quicksand case right? Which do u prefer this or the quicksand?
seanrobot said:
You also have the quicksand case right? Which do u prefer this or the quicksand?
Click to expand...
Click to collapse
Quicksand is obviously slimmer. The sandy texture is nice.
This provides WAY more protection though. The matte texture is also nice.
It's a matter of what you need.
Just got this Hyperion case in. Perfect cutouts, perfect form factor still kept (it's very slim). $6-7 on Amazon, can't be beat.
+1 from me. I've got the clear case, nicely shows off moto maker colors while still giving it that bit of extra protection.
I also ordered this one and was pleasantly surprised.
Sent from my XT1058 using XDA Premium 4 mobile app
wow that does look pretty good great find
I am waiting for the car sick to be released to see if it has limitations on case size. Hope they hurry before it is too late and I break this thing. This one looks good and cheap enough to just go for not knowing.
Sent from my XT1060 using XDA Premium 4 mobile app
I just ordered the Smoke colored one.
clankfu said:
I just ordered the Smoke colored one.
Click to expand...
Click to collapse
Got it today and love it. Wondering if I should've ordered the clear one though so I could see more of the back.
I got the frost clear one for a white moto x and it looks really good. The back has a nice matte feel to. I think this is the best tpu case for the moto x. I'd like a simliar hard case that is below 10$ but I can't seem to find one. Clear, dimple cut out, thin with a little lip for lay on the table.
Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.
finalarcadia said:
Got this in frost clear. It's not bad but still too thick for my liking. Biggest complaint is that buttons are hard to press, would prefer a cutout of the buttons. Would've liked the whole thing to be matte and to reduce the edges on the front; they are too close to the screen.
The quest continues for the perfect TPU case.
Click to expand...
Click to collapse
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.
clankfu said:
Are there really TPU cases that are thinner than others? I've used a bunch on all my devices and haven't really noticed a difference in thickness.
Click to expand...
Click to collapse
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.
finalarcadia said:
Yes I had a TPU case from Spigen for my GS3 that was simply perfect. Super thin and somehow it did not interfere with the front of the phone at all, unlike most other cases. It kinda tapers outward, instead of towards the screen, so it still gave protection from falls. And yet it all managed to stay snug. This is the kind of case i'm looking for.
Click to expand...
Click to collapse
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.
clankfu said:
The only Spigen TPU case that I'm aware of is the Neo Hybrid. I had that case for my S3 as well and it definitely wasn't thinner than other TPU cases.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=jmuE7QixQIg
Was that one. Discontinued or something, was never able to buy it again.
Ordered a moto X this week (Navy back, white front and silver case...can't find a transparent hard case that shows the back...all cases so far seem to be opaque. The diztronic one has a matte finish..Any pointers?
seshsud said:
Ordered a moto X this week (Navy back, white front and silver case...can't find a transparent hard case that shows the back...all cases so far seem to be opaque. The diztronic one has a matte finish..Any pointers?
Click to expand...
Click to collapse
Motorola.com. They have 5 different kinds of clear cases. How hard did you look?
http://www.motorola.com/us/accessories-cases-covers/
eyc said:
Motorola.com. They have 5 different kinds of clear cases. How hard did you look?
http://www.motorola.com/us/accessories-cases-covers/
Click to expand...
Click to collapse
I did, they are expensive....nothing close to $10ish...
seshsud said:
I did, they are expensive....nothing close to $10ish...
Click to expand...
Click to collapse
You could try this one:
http://www.amazon.com/Minisuit-Ultr...=1386219791&sr=8-5&keywords=moto+x+clear+case
It was $4 a couple days ago
I can't personally speak for that one, but I can for these:
http://www.amazon.com/Cruzerlite-Bu...=1387406862&sr=8-1&keywords=cruzerlite+moto+x
http://www.amazon.com/Cruzerlite-Ex...=1387406862&sr=8-7&keywords=cruzerlite+moto+x
Only the symbols/lines and sides are completely transparent, but I thought they looked nice with the custom backs. They are also very snug and solid. So tight, in fact, that you need to be very careful putting it on if you have a screen protector.
Also, it's B2G1 on those.
carock said:
You could try this one:
http://www.amazon.com/Minisuit-Ultr...=1386219791&sr=8-5&keywords=moto+x+clear+case
It was $4 a couple days ago
I can't personally speak for that one, but I can for these:
http://www.amazon.com/Cruzerlite-Bu...=1387406862&sr=8-1&keywords=cruzerlite+moto+x
http://www.amazon.com/Cruzerlite-Ex...=1387406862&sr=8-7&keywords=cruzerlite+moto+x
Only the symbols/lines and sides are completely transparent, but I thought they looked nice with the custom backs. They are also very snug and solid. So tight, in fact, that you need to be very careful putting it on if you have a screen protector.
Also, it's B2G1 on those.
Click to expand...
Click to collapse
http://www.amazon.com/Griffin-GB38037-Reveal-Case-Motorola/dp/B00EI7CX1A
its not $10 but for the extra $9 its worth it haha I have this and the trident cyclops (beast)
Power support ones are very nice... Both the hybrid fusion style one and the hard shell. Love their screen protectors too. Worth the money for a good case.
Sent from my XT1053 using XDA Premium 4 mobile app
Jayrod1980 said:
Power support ones are very nice... Both the hybrid fusion style one and the hard shell. Love their screen protectors too. Worth the money for a good case.
Sent from my XT1053 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you still feel the dimple on back with this case?
Sent from my XT1056 using Tapatalk
I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them
gochiefs said:
I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them
Click to expand...
Click to collapse
Thanks I ordered this. hopefully it will provide good protection too besides being transparent and show off the Moto X...we'll see...
gochiefs said:
I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them
Click to expand...
Click to collapse
Could you upload a picture?
Air Jacket is clean and shows off the back and our corporate logo perfect.
Good protection have dropped 2 times both glass 1st and back 1st no damage.
Plus the side case edge matched the Moto X choice great for the buttons and camera ring.
You can feel the dimple on the phone as that part of the case is open.
Power Supply was a little slow to respond on questions on there FB page but very happy with the product!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought one from Ebay and it is okay. The price was less than $5. Since I am a new member, I can't post outside links but it is called " Moto X Clear Slim TPU".
I decided not to use a case on mine. I am using a pouch and I'll use the bumper on occasion. My ideal case is a matte bumper with clear button covers.
SUPCASE
I just bought a SUPCASE and love it for the extra protection over my Bear Motion one. Both on Amazon. The SUPCASE has a clear back with black edges. Perfect for showing off the Moto X Dev Ed Black with White back if you ask me.
seshsud said:
Thanks I ordered this. hopefully it will provide good protection too besides being transparent and show off the Moto X...we'll see...
Click to expand...
Click to collapse
Bad decision, got this case..installed it...but it seemed to have an odd effect on google now...ie the response was poor..so tried taking the case man...it was so painful...
I received my power supply air jacket case today. I like it a lot. The fit is perfect. I wish the back were more grippy, but the edges are just grippy enough.
Moto X using Tapatalk
There are at least 5-10 on eBay that are hard clear cases. I bought two different ones for $3 each. Look harder!
Heyyyy!! New hard case for the OPO comming out on March 31
IMO it looks way better than the Tudia, Jkase...
Amazon link: http://www.amazon.com/OnePlus-One-C...d=1424103476&sr=1-2&keywords=oneplus+one+case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Colors available:
I'm happy the Tudia wasn't available in Europe, now I can buy this one
Balada10 said:
Heyyyy!! New hard case for the OPO comming out on March 31
IMO it looks better than the Tudia, and it will be waterproof
Amazon link: http://www.amazon.com/OnePlus-One-C...d=1424103476&sr=1-2&keywords=oneplus+one+case
No pictures yet, but at their instagram they posted this:
I'm happy the Tudia wasn't available in Europe, now I can buy this one
Click to expand...
Click to collapse
Looks awesome!
Balada10 said:
Heyyyy!! New hard case for the OPO comming out on March 31
IMO it looks better than the Tudia, and it will be waterproof
Amazon link: http://www.amazon.com/OnePlus-One-C...d=1424103476&sr=1-2&keywords=oneplus+one+case
No pictures yet, but at their instagram they posted this:
I'm happy the Tudia wasn't available in Europe, now I can buy this one
Click to expand...
Click to collapse
Where are you getting waterproof from? On Amazon all it says is:
Embedded water-resistent screen protector cover buffers against scratches
Click to expand...
Click to collapse
To me all that says is there is a screen protector glued in like the Tudia case. I could be just over looking the info though.
that case is hideous!
They need to make an Atomosphere case, STAT
BluGuy said:
Where are you getting waterproof from? On Amazon all it says is:
To me all that says is there is a screen protector glued in like the Tudia case. I could be just over looking the info though.
Click to expand...
Click to collapse
Yep, sorry! I saw a guy asking on instagram if it was waterproof, and they said it's water resistant. Guess it's not the same concept
I like it, it reminds me of the cases that UAG make.
Looks ugly. I wish we had more choices. I just got a tudia omnix and its okay. Buttons suck.
Sent from my OnePlus One using Tapatalk Pro
M gonna buy one of these for outdoor activities as for sure it can take small bumps
Sent from my A0001 using XDA Free mobile app
Have had. Mine ordered for a month now....counting down the days ....hope the tempered screen protector works inside ...(fingers crossed)
happydad4130 said:
Have had. Mine ordered for a month now....counting down the days ....hope the tempered screen protector works inside ...(fingers crossed)
Click to expand...
Click to collapse
I plan removing their screen protector, mine is better and enough
I can hardly wait for mine to get here !
So I can set it on fire and put this case out of it's misery.
Did anyone bought it? waiting for the review
I quite like the robust look of this case but would prefer the case without the screen protector part as I already have a tempered glass one on. Does anyone know if you can use it without the built in screen protector part?
gsmyth said:
I quite like the robust look of this case but would prefer the case without the screen protector part as I already have a tempered glass one on. Does anyone know if you can use it without the built in screen protector part?
Click to expand...
Click to collapse
In that case i think tudia cygen dual layer case would do the job for you
Sent from my A0001 using XDA Free mobile app
sandeeppathak007 said:
In that case i think tudia cygen dual layer case would do the job for you
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Yep thats a nice one too, it reminds me of the spigen slim armour clone case I had for my galaxy S4. Had about 5 or 6 cases for my S4 and it was probably the best of them all, really solid and provided great protection. It was a spigen copy also so it was only a few quid.
I've had the Poetic Revolution for a day now and after one charge the USB plug doesn't hold in place any more ....... after one charge!
I wish that I hadn't thrown money away for this case.
Twibble said:
I've had the Poetic Revolution for a day now and after one charge the USB plug doesn't hold in place any more ....... after one charge!
I wish that I hadn't thrown money away for this case.
Click to expand...
Click to collapse
I agree.... I bought this case also and I could not get my volume buttons to work. I had to actually modify the volume buttons so they would work and I removed the USB flap cover so it would not bend my USB cable while connected to my One.
It is a very nice durable case however I dont like that I had to modify it to use it.
I have had this case for a while, the screen protector is water resistant but it isn't that high quality so I keep missing touches. Also, I can't reach the sides of the screen with my big fingers. It has protected my phone from multiple falls however, and it feels really solid but it does add heft
I just got the case, love it !!! quality is just as expected from kevlar cases. The camera is flushed with the case (i feel that it is slightly, just slightly raised to protect the camera which is a plus).
The lips of the case is not raise up to protect the screen though, but the edge is perfectly cut to the metal sides which makes it feels really natural to hold. If it is raised further, i think dust can be easily trap in side like the original google case so i think its fine for me, personally.
NOTE: this is not a carbon fibre case, its made of 100% kevlar/aramid. Carbon fibre as a case would have interference with signals.
PROTIP: when trying to remove the case, work from the buttom edge and slowly upwards along the power/volume side (i find it slightly easier on this side).
MOD EDIT: LINK REMOVED
Per the forum rules, posting affiliate links on XDA is not allowed:
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Click to expand...
Click to collapse
THREAD CLOSED
Let the pictures do that talking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you are welcome i will do a brief review when i get the case, i have high hopes of it in terms of slimness, weight and texture.
Also ordered one, thanks for posting!
no problem man, hopefully, it comes with a tempered glass protector.
because i have seen some reviews/unboxing on magcase for iphone 7, they did come with it.
fingers crossed!
update: no tempered glass included in package.. dang oh well
Wow. Really promising. **** it. Ordered.
Sent from my Pixel 2 XL using Tapatalk
Ordered it since 10 days. But its not released yet or shipped.. I remember the 13th of this month was mentioned as a release day.. I tried it before with another device, very very slim but high quality.. Real carbon fiber.. Very minimal.. But very tough.. And it has the coils impeded for the magnet car holder..
Found the case yesterday on the web by coincidence...as they offer free shipping also to Eureop, I've ordered one, as I am looking for a thin case. Also have a Spigen Thin Fit but the Spigen is probably not as durable as the Pitaka.
Now I only need a decent tempered glass for the Pixel 2XL and then I am ready to receive it next week.
I wonder if this case will work with a dbrand skin on?
Taebom said:
I wonder if this case will work with a dbrand skin on?
Click to expand...
Click to collapse
I assume it would because dbrand skin is literally a really thin piece of sticker but if u want to remove the case, u gotta remove it carefully as edges of the sticker is still protruding a just little.. well that's my guess
is the case thick enough to protect the camera lens?
ayce said:
is the case thick enough to protect the camera lens?
Click to expand...
Click to collapse
Thats a very good question, but they should have taken that in consideration, coz they did with there iPhone cases
When someone gets this case, please post some pics of the camera coverage and the sxreen/case edge areas. Thanks
Interesting, so this thin case has metal plates in it? I would not be using it in my car.
Will it interfere with NFC though.
galaxys said:
Interesting, so this thin case has metal plates in it? I would not be using it in my car.
Click to expand...
Click to collapse
Eh?
Sent from my Pixel 2 XL using Tapatalk
Nekromantik said:
Will it interfere with NFC though.
Click to expand...
Click to collapse
No pixel nfc component is around the glass area of the phone but the metal is embedded around the middle area of the case.
machostallion said:
When someone gets this case, please post some pics of the camera coverage and the sxreen/case edge areas. Thanks
Click to expand...
Click to collapse
Yeah man I promised that I will update you on ur thread haha
galaxys said:
Interesting, so this thin case has metal plates in it? I would not be using it in my car.
Click to expand...
Click to collapse
It's there to make it compatible with their car mount but doesn't affect the thickness, flushed within the case
Amjad.AbdulGhani said:
Thats a very good question, but they should have taken that in consideration, coz they did with there iPhone cases
Click to expand...
Click to collapse
Just asked them if it sits flush with camera lense and they said yes :/
I'll wait for the review but I think MNML nailed it by raising the fingerprint sensor, effectively protecting the lens because of the angle it creates with the edge. Even though the case itself sits flush with the lens.
And it's really less expensive.
Sent from my Pixel 2 XL using Tapatalk
Taebom said:
Just asked them if it sits flush with camera lense and they said yes :/
Click to expand...
Click to collapse
As long as it protects the camera.. So am assuming its as think as the camera bump or so.. That fine with me.. But again will wait to see it in hand..