Hi everybody,
I'm buy the moto 360 1 gerneration and i'm realy love this watch. I have a Iphone 5.
When i received the watch, cannot connect to my Iphone and just upgrade the watch to 5.0.1 and all work fine.
I receveid the last upgrade 6 and in begining all works fine.
Just i loose the Wifi and Bluethoot settings on the watch. But for the rest all work.
I don't know why but i do a reset factory to see if i cannot gat back the wifi and bluethoot option on my watch. After that i connect without any problem to my Iphone but When i try to have the whetar he always say me that the localisation fonction is not active on phone, but when i go to application meteo on watch he give me the Weather... and when the watch is disconnect from the iphone for any reason including charge, it's impossible to reconect ... I'm always need to do a factory reset, re connect my wath, work and again reset factory to re connect.
I'm really have a good sensation with this watch in the begining but now it's very hard.
Is somebody know this problem ? Is any possibility of resolution ?
Sorry for my bad english. But i'm realy need help.
Thanks all for your support.
Bruno
Related
Hi everyone, I received today my Sony smartwatch 2 and is pretty good. The only problem I have is that I can't connect it to my main phone an acer liquid e2 duo (the dual sim one).. I can successfully pair it (Sometimes, usually he gave me a pin error) with the bluetooth but then the sw fail to recognize the installed app on the smart phone,it get stuck on the animation that say you to install the Sony app.. I don't think it's a bluetooth problem it seems to be something with the app-smartphone related.
I tried with an xperia phone and everything went good no problem at all.
I really hope someone can help me and thanks in advance.
Same problem
Megasd said:
Hi everyone, I received today my Sony smartwatch 2 and is pretty good. The only problem I have is that I can't connect it to my main phone an acer liquid e2 duo (the dual sim one).. I can successfully pair it (Sometimes, usually he gave me a pin error) with the bluetooth but then the sw fail to recognize the installed app on the smart phone,it get stuck on the animation that say you to install the Sony app.. I don't think it's a bluetooth problem it seems to be something with the app-smartphone related.
I tried with an xperia phone and everything went good no problem at all.
I really hope someone can help me and thanks in advance.
Click to expand...
Click to collapse
I have exactly the same behaviour with an acer liquid gallant duo. Please help my, otherwise I'll send back the watch to amazon.
Unfortunately Acer's Bluetooth stack is probably missing or poorly implementing some BT profiles required for a correctly working connection.
themissionimpossible said:
Unfortunately Acer's Bluetooth stack is probably missing or poorly implementing some BT profiles required for a correctly working connection.
Click to expand...
Click to collapse
So there isn't a solution to the problem? Like a rooted app or something that add the correct functionality to the bt?
A possible solution might be installing another ROM, like a CyanogenMod (if available for that smartphone).
Problem solved
ac_xda said:
I have with he n acer liquid gallant duo. Please help my, otherwise I'll send back the watch to amazon.
Click to expand...
Click to collapse
I solved my issue using an app on the market called bluetooth fix repair it requires root and it's free ) you have to try a lot of times and be sure to restart the phone after you install the sw 2 app I hope you solve it too thanks to mission impossible for the help I owe you this one thanks a lot
Re: sony smartwatch 2 pairing
At the time of Sales the Sony should prove its own software/support to solve bluetooth pairing issues with different mobile
not working for me
Megasd said:
I solved my issue using an app on the market called bluetooth fix repair it requires root and it's free ) you have to try a lot of times and be sure to restart the phone after you install the sw 2 app I hope you solve it too thanks to mission impossible for the help I owe you this one thanks a lot
Click to expand...
Click to collapse
Thank you for your suggestion, I've tryed but it's still not working. Could you please let me know the exact steps that worked for you?
I have a acer e2 too, to me works, but if i power off smartwatch 2 and power on it, the acer doesn't connect. I must restart the phone and it connects.
EDIT: now i have discovered that,when i power off the smartwatch 2, i must kill the process "smartwatch2" from the phone and if i power on the smartwatch 2 it connects! ^_^
Same issue here.
SW2 and Acer Liquid E2 Duo (aka v370) do not connect.
Pairing succedes but after 1 second the connection falls and you have to pair it again and again.
Tried with bluetooth fix repair and once it worked, but it never worked again.
Has someone suggestions?
Thanks in advance.
For me all works great
Inviato dal mio V370 utilizzando Tapatalk
Restart smart connect on your phone. That fix' in my case.
Fixed update of Smart Connect is available for download!
bluetooth pairing error
Mine too. Could someone help me how to fix bluetooth pairing error. Really need help. Always error when pairing to others device. How to fix. Already try pkill. But didn't find file. Plizz help buddy.
The solution for acer e2 is to install androium 3.5 ROM. It is based on Acer e3 Rom that hasn't any problem!
Which phone and android version do you have?
Hello Guys!
I just got the new SGS6 and wanted to connect it to my SWR50 but i cant pair it.
My old HTC One M7 had no problems connecting to it..
Smartwatch has Android Wear 5.0.2 and the SGS6 has lollipop 5.0.2.
Anybody has the same problems?
greets
Illusion777 said:
Hello Guys!
I just got the new SGS6 and wanted to connect it to my SWR50 but i cant pair it.
My old HTC One M7 had no problems connecting to it..
Smartwatch has Android Wear 5.0.2 and the SGS6 has lollipop 5.0.2.
Anybody has the same problems?
greets
Click to expand...
Click to collapse
I don't have the S6 yet, but did you try resetting the watch and THEN pairing it. I had to do that after the last update on my S5. Also be sure to unpair it from your M7 if you did not
thanks for your reply!
yes, i also did a reset on my watch.. twice.
:crying:
Try this
Hello
Try this:
1. Reset your smartwatch 3
2. When smartwatch 3 restart and ask u to install android wear, start android wear on s6 ( i use edge, had same problem couldn't pair using Bluetooth )
3. Find your watch inside wear application and connect to it.
4. Confirm pin first on the watch and the on the phone.
It worked for me.
Each time I use Mi6 via bluetooth in car to answer/make calls - first call goes OK, and all others not - people I talk to don't hear me. It happena in 4 different cars so it's not car's problem. Mi5 was OK. I run 7.1.1 NMF26X global beta. miui 8 7.6.8 global beta. And can't solve it myself. Tried deleting and re-adding cars, restarted phone - nothing helped. When I switch to phone during call - it's OK. As soon as I switch back to car - same problem. No one hears me and I hear everyone.
Any1?
I'm sorry but I can't test because I don't have any Bluetooth devices.
Not using any bluetooth device either.
Hello there
I'm a new xiaomi mi6 user. I have 7.5.25 version rom installed on my phone. My phone does not see andriod wear app on my smart clock with bluetooth. Also does not share internet with hotspot. There is also a problem with the GPS, the satellites can not find it immediately. can you help me.
Thank you
ERSL said:
Hello there
I'm a new xiaomi mi6 user. I have 7.5.25 version rom installed on my phone. My phone does not see andriod wear app on my smart clock with bluetooth. Also does not share internet with hotspot. There is also a problem with the GPS, the satellites can not find it immediately. can you help me.
Thank you
Click to expand...
Click to collapse
Ok, one by one.
1. My phone does not see andriod wear app on my smart clock with bluetooth --> My watch works, did you unpair your watch with old phone first? Android wear watch can only connect to 1 phone.
2. There's personal hotspot, you can see it in the settings menu.
3. GPS needs time to find your phone, you need to have wifi (or mobile data connection to assist the phone), if it located your phone, next time GPS will work faster.
It is a different issue with me: when paired with a BT device with the "phone audio" profile enabled, despite picking up the call on via pressing the green button on the touchscreen, it still defaults to the BT device (and I have to switch audio back to "phone" before the other person cuts off after hearing nothing). This is on the global ROM 8.2.2.0...
The global ROM seems buggy as hell...
alien2k1 said:
Any1?
Click to expand...
Click to collapse
Hello Friend.
The same happens to me.
It connects to bluetooth but I have no output or audio input.
Did you get it fixed?
Thank you
Everyone.
This is not xiaomi's problem.
This problem is due to oreo's new bluetooth stack.
There is no current solution to this. I've searched far, wide and deep.
Android has a great track record in keeping the bluetooth stack broken.
If you try to search google, you will find out that not only xiaomi phones have this problem.
The only theoretical solution is to port old bluetooth blobs, and somehow make it work. But as far as i know, no one has done this before.
There is hope that android pie will fix this. But from what i read, early builds of pie still has this problem.
The problem is to connect Bluetooth on a Moto Z Play Android 7.1.1 patchlevel 2/2018 (current in reteu, was same result with Android 6.0.1 12/2016) with a Volvo XC40 car.
The first pairing with Bluetooth succeeds for a second. Then, nearly immediately, both displays (car and mobile) show reconnecting for about 10 seconds. It has a connect for a fraction of a second, and then is reconnecting and so on.
Trying flight mode and then only Bluetooth enabled on the mobile did not help. IIRC it showed some message about "My Volvo Carnull not bonded" (the name of the car for Bluetooth is "My Volvo Car" and some message with typo, something like "conecnting not successful". After that I rebooted, result was the state before with reconnecting.
Did try this several times. Also did try to reduce the amount of Bluetooth access types the car tries. There are 4 connected: phone, audio, internet, contacts. Did also not help.
Has anyone an idea how to get a successful connection or what the cause of the problem is? Did search for similar problems with Bluetooth in cars, but could not find anything (except for that hint with flight mode which did not help).
What I tried by now:
- Flight mode, only Bluetooth (as already mentioned). No change
- Remove all bluetooth connections. Pair new. No change
- Delete data for sytem app "Bluetooth Freigabe". No change
All other bluetooth connections are working fine. Another Moto Z Play using Android 7.0 (01/2017) is working flawlessly with that car. Strange for me is that it didn't work on 6.0.1 in the same way it does now fail on 7.1.1, but the other Moto Z Play using 7.0 is connecting stable.
Still the question: Does anyone have an idea how to get the connection working?
Factory reset?
I see that you deleted all bt connection but do you have some apps that are using bt? Like for smartwatch, headphones...?
I have Amazfit and watch must be connected to be able to pair a new device. Drow me crazy first time when I had that problem. I thought that car audio is broken, then phone... After pairing, watch doesn't have to be connected to reconnect.
Sent from my KFSUWI using Tapatalk
Zeljko1234 said:
Factory reset?
Click to expand...
Click to collapse
I was afraid this reply could come. When doing a factory reset, I do following: Pack /data/media somewhere because Nandroid omits this. Backup all partitions using twrp. Backup all apk using adb. Export SMS. Export contacts. Screenshots of the launcher screens. All this takes about 2-3 hours. Then I struggle a week until my device behaves like before. I'd be willing to do it if I saw a reason why it could help.
Zeljko1234 said:
I see that you deleted all bt connection but do you have some apps that are using bt? Like for smartwatch, headphones...?
Click to expand...
Click to collapse
Headphone, yes, there is August EP650 configuration tool that is not necessary. Thank you for the hint, will try it. Also I read somewhere it may help to delete cache partition, that's also worth a try before doing factory reset. Maybe I'll wait for Oreo before trying factory reset, could be they fixed some bug there.
Edit: BatOn which shows Bluetooth battery for external devices could also be the culprit.
Zeljko1234 said:
I have Amazfit and watch must be connected to be able to pair a new device. Drow me crazy first time when I had that problem. I thought that car audio is broken, then phone... After pairing, watch doesn't have to be connected to reconnect.
Click to expand...
Click to collapse
That's a strange behavior indeed. Amazfit seems to do something wrong.
It doesn't get any better if you upgrade to Oreo, I've been having problems with my Moto Z play disconnecting and reconnecting to the radio in my Corolla constantly ever since I went up to nougat. To be honest I just bought a good pair of headphones and stopped using the radio. Good luck though, if someone finds something that helps let me know.
I'm using bt with car audio, headphones, smartwatch... No problems at all, except one with Amazfit. And that is related to their bt implementation, not Moto fault.
Sent from my KFSUWI using Tapatalk
Seems the last action to remove Bluetooth related apps was the right one . There were two apps installed:
1. BatOn showing the state of battery of connected Bluetooth device
2. August configuration app for August EP650 headset
Removed both as they are usually not needed and it seems to work now. Will see later if it only worked for the short test I did today (currently I try to avoid driving because of an injury) or if it keeps stable.
Good, you didn't have to factory reset after all
Sent from my XT1635-02 using Tapatalk
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
ErgG said:
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
Click to expand...
Click to collapse
have you tried searching in settings for android auto, then tinkering with those settings?
oh, i was assuming you have an android auto enabled car... do you?
Failing that, not ideal, but you could try an auto connect app...
see here
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
ErgG said:
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
Click to expand...
Click to collapse
What about using one of those auto connect apps I linked to.... So that when you're car is detected it auto connects and launches android auto...
Ohh yes, you have just reminded me....Any particular one you may like to recommend?
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Quote
reg66 said:
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Click to expand...
Click to collapse
Thank you Reg. I'll have a look at that link.
I had already deleted the other devices anyway.
FMMMG said:
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
Click to expand...
Click to collapse
Thank you for trying to help me. Unfortunately your solution did not work in my KIa Stonic.