Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in these MODS before
* flashing it! YOU are choosing to make these modifications, and if you point
* the finger at me for messing up your device, I will laugh at you.
F2FS-ready TWRP info: post #2
minamo-g4-kernel(outdated, no update) info:
note: all minamo-g4-kernel's features are included in LlamaSweet Kernel
https://github.com/genesixx/LlamaSweet-msm8992/commits/cm-13.0?author=lindwurm
minamo-g4-kernel (OUTDATED, NO UPDATE)
Source
https://github.com/mordiford/minamo-g4-kernel
Features
https://github.com/mordiford/minamo-g4-kernel/wiki#features
Downloads
https://github.com/mordiford/minamo-g4-kernel/wiki/Download
Thanks
@genesixxbf3 - minamo-g4-kernel is based on https://github.com/genesixx/Llamasweet-msm8992 R4 release
CyanogenMod devs - kernel's update cherry-picked from https://github.com/CyanogenMod/android_kernel_lge_msm8992
@alucard_24 - imported alucard CPU Governor
UNOFFCIAL F2FS-ready TWRP for LG G4 (H815/H811)
1. What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system initially developed by Samsung Electronics for the Linux kernel.
The motive for F2FS was to build a file system that, from the start, takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
from: https://en.wikipedia.org/wiki/F2FS
Click to expand...
Click to collapse
It has higher random-write performance than others.
2. Download F2FS-Ready TWRP
Official TWRP can't mount f2fs. please use my TWRP.
H815: https://www.androidfilehost.com/?fid=24549084345926305
H811: https://www.androidfilehost.com/?fid=24566382913912854
3. How to use F2FS on Your G4!
Note: Change Data Partition to F2FS will DELETE ALL DATA include Internal Storage!!
and you can't mount /system as F2FS. ONLY /data and /cache are supported.
Reboot to TWRP,
Wipe -> Advanced Wipe -> Data, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Wipe -> Advanced Wipe -> Cache, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Reboot -> Recovery
Wipe -> Advanced Wipe -> System -> (Swipe to Wipe)
Install -> 1. ROM, 2. minamo-g4-kernel, 3. GApps, 4. extra -> Reboot system
I recommend clean install if you change File System.
4. Known Issues
plz tell me
5. FAQ
later
6. Thanks
TeamWin
omnirom
jakew02
codeworkx
7. Codes
https://github.com/mordiford-old/omni_device_lge_h815
https://github.com/mordiford-old/omni_device_lge_g4-common
https://github.com/mordiford-old/omni_kernel_lge_msm8992
@1indwurm
This is awesome! I'm going to be trying this some time this weekend probably, after a few people have reviewed the kernel. I'm especially glad that someone has taken over genesixxbf3's kernel- thank you!
Also, have you experienced any issues with the new F2FS file system? I've heard many good things about it, but this phone is my daily driver and I want it to be as stable as possible/
This kernel provides awesome battery life! I'm so amazed about it. Unplugged my phone 14 hours ago and still have 80% battery (I gotta admit I didn't use it much today). This is crazy!
Amazing! :highfive:
Sent from my LG-H815 using XDA Labs
1indwurm said:
Optional: Use F2FS on your G4
Official TWRP can't mount f2fs. please use my TWRP.
https://www.androidfilehost.com/?fid=24549084345926305
Note: Change Data Partition to F2FS will DELETE ALL DATA include Internal Storage!!
Reboot to TWRP,
Wipe -> Advanced Wipe -> Data, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Wipe -> Advanced Wipe -> Cache, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Reboot -> Recovery
Wipe -> Advanced Wipe -> System -> (Swipe to Wipe)
Install -> 1. ROM, 2. minamo-g4-kernel, 3. GApps, 4. extra -> Reboot system
I recommend clean install if you change File System.
Click to expand...
Click to collapse
are you gonna make a twrp with f2fs for the h811
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
vlc_marcos said:
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
Click to expand...
Click to collapse
Use the Resurrection Remix Or CM
vlc_marcos said:
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
Click to expand...
Click to collapse
I'm using tipsy ROM with it
Follow_and_Feel said:
This kernel provides awesome battery life! I'm so amazed about it. Unplugged my phone 14 hours ago and still have 80% battery (I gotta admit I didn't use it much today). This is crazy!
Amazing! :highfive:
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
What Governor you using?
Spaceboy60 said:
What Governor you using?
Click to expand...
Click to collapse
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Follow_and_Feel said:
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Ok, thanks. What program are you using to set that cause kernel aduitor doesn't have screen on /off settings I don't think.
gillim74 said:
I'm using tipsy ROM with it
Click to expand...
Click to collapse
What the hell is tipsy?
Follow_and_Feel said:
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
How can I set thi? With tasker? And if yes, how to do that with tasker?
RogerF81 said:
What the hell is tipsy?
How can I set thi? With tasker? And if yes, how to do that with tasker?
Click to expand...
Click to collapse
Its a ROM by ground zero projects.which version g4 do you have
gillim74 said:
Its a ROM by ground zero projects.which version g4 do you have
Click to expand...
Click to collapse
Ah thank you. I just googled it. It's only for h811?? I have the h815 version. How many ROMs are out there which I don't know? I have the impression that on xda there are only 50% of ROMs listed...:crying:
I am a little bit confused. Can i flash this kernel over CandySix?
dd0s said:
I am a little bit confused. Can i flash this kernel over CandySix?
Click to expand...
Click to collapse
You should be able too
is the heating issue solved ? when i installed your first release my device gets mega hot while charging
Spaceboy60 said:
Ok, thanks. What program are you using to set that cause kernel aduitor doesn't have screen on /off settings I don't think.
Click to expand...
Click to collapse
No it hasn't. A simple profile in the app "tasker" is triggered when the screen is on/off and changes the governor accordingly
Is there or will there be an H811 TWRP to change file systems?
castkel said:
Is there or will there be an H811 TWRP to change file systems?
Click to expand...
Click to collapse
I asked that too but got no reply
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install CWM recovery : http://forum.xda-developers.com/showthread.php?t=1668173
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Remember this is something I'm doing in my free time, so a small gift is always appreciated and motivates me to keep on updating the port Thanks to all donators!
First one FTW! :laugh:
Nice work, much broken?
Sent from my ASUS Transformer Pad TF300T
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
mikaole said:
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
Click to expand...
Click to collapse
Easily fixed by downloading SuperSU, and disabling Superuser (app) within the Apps section of Settings.
Yeah, finally! Thanks for this build, but I have one problem that wasn't mentioned before: My music is in the now playing section just showing kind of nothing (see in the Attachments) - I runned supercharger for a bit increasements in reaction time, maybe this is the issue if no other ppl are reporting this (or it's just the apk I dloaded from Google Play )
btw any chance to see a kernel with increased I/O to the official version from unter's source maybe? (yeah, they aren't up to date for 4.2, but Asus I/O is not really godlike lol )
Testing now things like surfing etc. - if there are more issues I'll report :good:
Just installed Play Music from Play Store, and the app seems to work fine. Let it some time to sync maybe?
As for I/O patches, some are already in sources, and I can't find any relevant commit at untermensch's github besides CPU/GPU clock changes.
Ok, I think I noticed differences without OC, but maybe it was GPU OC
btw Trebuchet is force closing for me when hiding the search bar, is this only my fault?
btw btw: google play music (and other laagish screens) "fixed" by letting the ROM be the ROM and set I/O to deadline...
Time to do some installing!
Is GPS still ****ed?
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
I'm not sure but some I/O patches are in ramdisk - means untermensch kernel have other ext4 mount options. And about the GPU and CPU OC, as I know this comes from that untermensch kernel emulates the TF700T hardware.
Northern-Loop said:
Time to do some installing!
Is GPS still ****ed?
Click to expand...
Click to collapse
Everyone reported it's fine.
atiatinini said:
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
Click to expand...
Click to collapse
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Nekromantik said:
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Click to expand...
Click to collapse
Same here. No developer options and using "secure settings" from the play store is no help.
adb toggle from play store works!
tobdaryl said:
Same here. No developer options and using "secure settings" from the play store is no help.
Click to expand...
Click to collapse
Click several time on number build in settings - info phone
On Android 4.2 you have to to settings - about tablet and tap 7 times build number for developer options to appear
thanks
anyone got flash player installed on this?
XpLoDWilD said:
Everyone reported it's fine.
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Click to expand...
Click to collapse
So it better to use CWM instead?
If you use CWM you can restore backups, seems like it's not possible (yet) on TWRP... So if you want to be on the safe side with backups, use CWM :good:
Maybe read this twrp link.http://teamw.in/androidmultiuser
CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CyanogenMod 11 - Android 4.4 (4.4.2 as of 12/12/2013) Kitkat builds
Sauce: https://github.com/CyanogenMod
Downloads
ROM: http://download.cyanogenmod.org/?device=p1/URL]
Installation
Note: this ROM uses the same partition layout as previous CyanogenMod builds.
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the build again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
cdesai said:
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
Click to expand...
Click to collapse
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
summerofciuccio said:
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
storm31 said:
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
Click to expand...
Click to collapse
thank you very much, you, cdesai and other dev are awesome... :laugh:
the vibrator is not working, am I wrong?
Just booted to ART on cm-11-20131208-NIGHTLY-p1 + Banks Gapps. Took about 5 minutes to boot from bootscreen and 15 minutes to update the apps. So far so good, things are going smooth. Thanks for this, no need to repartition now Keep up the good work!!!
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Qqqxxxzzz said:
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Click to expand...
Click to collapse
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 2.
DroidTalk said:
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 3.
Click to expand...
Click to collapse
I think added that line, If it doesn't boot after reboot I will check that it.
Edit: not booting...
Edit: I do have /data/local.prop with dalvik.vm.dexopt-data-only=1 in it
Edit: I think I do clean reinstall and try to use ART after that.
Edit: factory reset -> reinstall rom + gapps -> turn ART on and reboot -> stuck again -> added /data/local.prop with that line -> reboot -> optimizing apps -> everything crashes -> force reboot -> optimizing again -> 1. systemui crash, 2. Themes provider crash 3. com.android.phone crash... -> force reboot -> optimizing -> same crashes... -> shutting down...
Got ART working, this time I did clean install (without gapps and with older nightly), added /data/local.prop, set ART on and rebooted.
No list of "working" and "not working" things this time?
Sent from my GT-I9505 using xda app-developers app
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
bunchies said:
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
Click to expand...
Click to collapse
I have a GSM device, and the CDMA device's hardware has differences from the GSM version, so no, you can't just flash a GSM build on a CDMA device, even if you're using it as a wifi-only tablet - it just won't work.
Both devices use a different kernel, and different kernel version even (GSM has moved the aries kernel - aka what Galaxy S uses, whereas CDMA still has it's own, older version)
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
manewinho said:
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
Click to expand...
Click to collapse
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
chajang said:
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
Click to expand...
Click to collapse
Gapps Core or Gapps Standard?
Launcher 3 reset sd moved apps from home page @ every restart or after every of connection with pc...
Sent from my GT-P1000 using xda app-developers app
manewinho said:
Gapps Core or Gapps Standard?
Click to expand...
Click to collapse
It's depend on you. If you want to taste the full Google Experience such as GoogleSearchHome (integrated with Google Now) you must choose GApps Standard. But GApps Core only install Google Service.
I can't understand why people wants to move to ART so fast... It's well known that most apps doesn't plays well with ART yet, so it's much better to not use ART for some time until apps adopts it massively.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Hi I bring F2FS kernel for e975!
What is F2FS?(http://en.wikipedia.org/wiki/F2FS)
F2FS (Flash-Friendly File System) is a flash file system created by Jaegeuk Kim at Samsung for the Linux operating system kernel.
The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
F2FS much faster than EXT4
*I already tested only CM 4.4*(not for STOCK)
Features
-Based on CM Kernel
-Linux 3.4.101
-Linaro 4.9
-F2FS
-CPU Voltage Control
-Fsync
-iphone color preset
-gamma control
-Low Cpu Clocks
-Optimization Governors
-autosmp
-ETC..
/*Kernel Installation*/
1. http://d-h.st/Z7N (v3.0) Download and enter recovery
2. Wipe Cache & Dalvik Cache
3. Flash Sail_v*.zip
4. Enjoy!
/*Switch to F2FS*/
!!WARNING!! You will LOSE ALL your data .(Photos, Videos, Music, etc)
1. http://d-h.st/SMh & http://d-h.st/SdW(RecoveryV1) Download and enter recovery
2. Flash
3. Reboot Recovery
4. Select "Wipe and Format Options"
Select "Custom Format Options"
Select"toggle f2fs <-> ext4 migration"
Select"format /cache -> f2fs ->Yes"
Select"format /data and /data/media (/sdcard) -> f2fs -> Yes"
5. Update to Newest kernel. http://d-h.st/Z7N (v3.0)
6. Enjoy!
!!!you flash rom or boot.img when flash before f2fs you must flash this F2FS boot.img.zip http://d-h.st/Z7N
Sorry for my bad English. Thanks.
Source : https://github.com/Docker-J/lge-kernel-gproj
Thanks to
CM
arter97
anarkia1976
mrg666
faux123
franciscofranco
Philz
flashed successfully on xenonhd rom.. ,.......... hopes a better battery life... :good:
Could this be flashed on Gee ROM based or should i wait for further release?
You couldn't. I'll work and release as soon as possible.
Sent from my LG-E975 using XDA Free mobile app
Awesome! I notice a much much better performance using f2fs on my n7. Does it need a modded recovery and ROM as well?
It is true, that i will lose my data like music because of F2FS? Or it´s just like other kernels?
RE: f2fs
kaspakind said:
It is true, that i will lose my data like music because of F2FS? Or it´s just like other kernels?
Click to expand...
Click to collapse
Yes u will loose each and everything so backup as the OP said in his post, second thing its a file system so it will change ur current file system like ext4 in to f2fs and you need the recovery plus the working kernel to operate f2fs. As OP mentioned, its not for stock.
Regards
[email protected] said:
Yes u will loose each and everything so backup as the OP said in his post, second thing its a file system so it will change ur current file system like ext4 in to f2fs and you need the recovery plus the working kernel to operate f2fs. As OP mentioned, its not for stock.
Regards
Click to expand...
Click to collapse
I´m on TWRP 2.6.3.0. So i can use the kernel on CM 11 or on gproj based roms?
grunch21 said:
Awesome! I notice a much much better performance using f2fs on my n7. Does it need a modded recovery and ROM as well?
Click to expand...
Click to collapse
I already modded recovery. recovery include in f2fs for e975.zip
Sent from my LG-E975 using XDA Free mobile app
kaspakind said:
I´m on TWRP 2.6.3.0. So i can use the kernel on CM 11 or on gproj based roms?
Click to expand...
Click to collapse
Sure
Sent from my LG-E975 using XDA Free mobile app
junesoung said:
Sure
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
What about Phils?
Sent from my LG-E975 using Tapatalk
junesoung said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Hi I bring F2FS kernel for e975!
What is F2FS?(http://en.wikipedia.org/wiki/F2FS)
F2FS (Flash-Friendly File System) is a flash file system created by Jaegeuk Kim at Samsung for the Linux operating system kernel.
The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
F2FS much faster than EXT4
*I already tested only CM 4.4*(not for STOCK)
Features
-Based on CM Kernel
-Linux 3.4.91
-Linaro 4.9
-F2FS
-CPU Voltage Control
-Fsync
-iphone color preset
-gamma control
-Low Cpu Clocks
-Optimization Governors
-autosmp
-ETC..
F2FS Installation(F2FS support recovery included in 'F2FS for e975.zip')
!!WARNING!! You will LOSE ALL your data .(Photos, Videos, Music, etc)
1. http://d-h.st/GD7 Download and go to recovery
2. Wipe Cache & Dalvik Cache
3. Flash F2FS for e975.zip
4. Update to Newest kernel. http://d-h.st/8jh (v1.0)
5. Enjoy!
Normal kernel Installation(Non F2FS)
1. http://d-h.st/8jh (v1.0) Download and go to recovery
2. Wipe Cache & Dalvik Cache
3. Flash Sail_v*.zip
4. Enjoy!
Sorry for my bad English. Thanks.
Source : https://github.com/Docker-J/lge-kernel-gproj
Thanks to
CM
arter97
anarkia1976
mrg666
faux123
franciscofranco
Click to expand...
Click to collapse
Just flashed the no F2Fs version and I really like it , just one question, does this kernel bring Lgs thermal control enabled by default?
guidoido004 said:
What about Phils?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Philz recovery? Credit? I forget it. Add now
Sent from my LG-E975 using XDA Free mobile app
Galileo said:
Just flashed the no F2Fs version and I really like it , just one question, does this kernel bring Lgs thermal control enabled by default?
Click to expand...
Click to collapse
Enable temperature throttle on trickstermod
Sent from my LG-E975 using XDA Free mobile app
so if it's gproj kernel, will it work with Vanir 4.3.1?
the rom mentioned above works great with "f93 grpoj" kernel, so why the "sail" kernel doesn't work with this stuff?
I flashed without F2FS recovery (2nd method), i wanted to try ,how good it is
I've got a kernel crash (black screen , white text), anyway i stay tuned, because i really would try how much F2FS improves speed
banangrg said:
so if it's gproj kernel, will it work with Vanir 4.3.1?
the rom mentioned above works great with "f93 grpoj" kernel, so why the "sail" kernel doesn't work with this stuff?
I flashed without F2FS recovery (2nd method), i wanted to try ,how good it is
I've got a kernel crash (black screen , white text), anyway i stay tuned, because i really would try how much F2FS improves speed
Click to expand...
Click to collapse
I'll try to make kernel for 4.3
And 4.4? Would like to try f2fs and with your kernel on slimkat, and if it's going to be stable I think more users will try it
junesoung said:
I'll try to make kernel for 4.3
Click to expand...
Click to collapse
Thanks is advance this can be very usefull, because in my opinion , Vanir 4.3.1 is one of the best (real) gaming performance rom (not in benchmarks), i think so, because every game runs much smoother on rom mentioned above, than any 4.4.2 builds (tested almost so much roms) even with OC , i know it's mainly kernel dependent, but i really feel the difference (almost 24k on Antutu with 4.4.2 and ak [email protected],84Ghz and not as much smoothnes in GTA SA, vs 21k with 4.3.1 rom @1,5Ghz and really smooth gaming on High Quality and Detailed Reflections on the same game)
There are of course many usefull features to add to ur kernel like IntelliPlug , and good thermal (like IntelliThermal) ,dt2w, gpu governors (e.g. simple governor) etc. Anyway, I don't know how to build own kernel, and I suppose it's a really hard work to make a ultra fast kernel with a lot of features so look at it with distance.
sorry if I'm too pedantic I'm just a smartphone perfectionist
junesoung said:
Philz recovery? Credit? I forget it. Add now
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Lmao. I meant if it works. Haha. Tho you answered anyway. Thanks!, ^^
Enviado de meu LG-E975 usando Tapatalk
Very interesting idea, nice kernel.
Maybe a bit difficult to stay with but this thing sounds interesting, not bad.
Keep up the good work
Sent from my LG-E975 using Tapatalk
Note: Official CM13 builds for Oppo Find 7a/s have been released as of 4th December 2015
Unofficial CM13
- Marshmallow-
for
Oppo Find 7a/s
An early taste of Marshmallow...
The original Developer is Wuxianlin.
You can find the ROM download links here - http://pan.baidu.com/s/1jGETpbC#path=%2FCM13-Find7
Mirror (Latest Only) (By Spoonymoon):
cm-13.0-20151127-UNOFFICIAL-find7.zip
https://mega.nz/#!DpVDEKSR!Y-SxMCw83UQAeBQ6txrXZ3-b-IKz_Q7Z1uSu-kpcl6o
cm-13.0-20151110-UNOFFICIAL-find7s.zip
https://mega.nz/#!igMylYRL!pAtLqr8g3Kb8R-NqhfAUnAq8gENhsiia86YOFpwd8eM
- Disclaimer -
Code:
#include
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Source Code:
Code:
[url]https://github.com/CyanogenMod/android_device_oppo_find7s/tree/cm-13.0[/url]
[url]https://github.com/CyanogenMod/android_device_oppo_find7/tree/cm-13.0[/url]
[url]https://github.com/CyanogenMod/android_device_oppo_find7-common/tree/cm-13.0[/url]
[url]https://github.com/CyanogenMod/android_device_oppo_msm8974-common/tree/cm-13.0[/url]
[url]https://github.com/CyanogenMod/android_kernel_oppo_msm8974/tree/cm-13.0[/url]
Installation -
For Color OS 2 & 2.1 Users (4.4.2 & 5.0) -
Use third party recovery to Backup (TWRP).
Download Color OS 1.2.8>HERE<
Boot into ColorOS recovery
Wipe data and cache
Flash ColorOS 1.2.8 (It took 5-10 min for me to complete)
Let it boot. Then again reboot to custom recovery (TWRP)
Wipe-> data, cache, dalvik cache, system.
Flash CM13. Reboot.
It takes 5-6 minutes to boot in the first run, so don't do anything stupid.
For Color OS 1 Users (4.3) -
Reboot to custom recovery (TWRP), Have Backup.
Wipe-> data, cache, dalvik cache, system.
Flash CM13. Reboot.
For Custom ROM Users (4.4.x/5.0.x/5.1.x) -
Reboot to custom recovery (TWRP), Have Backup.
Wipe-> data, cache, dalvik cache, system.
Flash CM13. Reboot.
GApps (Mini) - http://downloadmirror.co/android/ss
WORKING :
Unified Storage
Calls/Messaging
Bluetooth
WiFi
GPS
Torch
WiFi Hotspot
Root access
Camera
BUG LIST :
Not all CM customization options integrated
Skyline Notification
Storage
NFC
List will expand if more bugs are found . . .
PATCHES :
Root fix : http://www.mediafire.com/download/713gjcvl9b89mor/BETA-SuperSU-v2.52.zip
Screen density fix for 7s(X9076/X9077) : http://www.mediafire.com/download/t0x9ue80kgql6hg/find7s_patch.zip
Wow now thats fast. Gonna try this soon.
Manas1796 said:
More content is upcoming shortly
Unofficial CM13
- Marshmallow-
for
Oppo Find 7
An early Taste of Marshmallow...
The original Developer's name is "Wuxianlin".
You can find the direct link here - http://pan.baidu.com/wap/shareview?...d7&page=1&num=20&fsid=758500377301006&third=0
Code:
#include
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installing Instructions -
For Color OS 2 & 2.1 Users (4.4.2 & 5.0) -
Use third party recovery to Backup (TWRP).
Download Color OS 1.2.8>HERE<
Boot into ColorOS recovery
Wipe data and cache
Flash ColorOS 1.2.8 (It took 5-10 min for me to complete)
Let it boot. Then again reboot to custom recovery (TWRP)
Wipe- data, cache, dalvik cache, system.
Flash CM13 (Takes ~40 sec). Reboot.
It takes 3-4 minutes to boot in the first run, so don't do anything stupid.
For Color OS 1 Users (4.3) -
Reboot to custom recovery (TWRP), Have Backup.
WIpe- data, cache, dalvik cache, system.
Flash CM13 (Takes ~40 sec). Reboot.
Click to expand...
Click to collapse
How do I download ? mirrors ??
I saw this posted on the OPPO forums by the same "Wuxianlin", it raises my suspicious eyebrow as it linked to a chinese site with nothing but chinese that google struggled to translate.
I don't dare download it
This is awesome mate….
Thankyou, but NOT able too do from baidu whitout been registered…
Plz provide mirror someone????
I'll flash and test, for sure
Thx in advance
Edit: but why flash cos first??, there's no lvm or special remapping needed, it's cm13??
spoonymoon said:
This is awesome mate….
Thankyou, but NOT able too do from baidu whitout been registered…
Plz provide mirror someone????
I'll flash and test, for sure
Thx in advance
Edit: but why flash cos first??, there's no lvm or special remapping needed, it's cm13??
Click to expand...
Click to collapse
yup i think there is no lvm support just like cm12. waiting for mirror too.
spoonymoon said:
This is awesome mate….
Thankyou, but NOT able too do from baidu whitout been registered…
Plz provide mirror someone????
I'll flash and test, for sure
Thx in advance
Edit: but why flash cos first??, there's no lvm or special remapping needed, it's cm13??
Click to expand...
Click to collapse
StormTrooper89 said:
yup i think there is no lvm support just like cm12. waiting for mirror too.
Click to expand...
Click to collapse
Yup, it has no support for LVM just like CM12 and 12.1
Screenshots will be coming up soon.
I am downloading the ROM with "JDownloader 2 BETA". It does not require a baidu account. My internet speed is pretty slow (Max 60kB/s), so it will take a while before I can upload any screenshots
EDIT: Hey guys the mirrors are up! & LVM is supported
wow Wuxianlin is great, isn't the same dev who made cm12 early builds? i will install after they fix the storage bug, i use my find7 as daily driver... so is a bit too early for me maybe
i hope that the new way to format sd cards as internal storage introduced in M could finally stop forcing me to deal with lvm/coldbird things
thanks for the interesting post and thanks to who made mirrors of course
-lorenzo- said:
wow Wuxianlin is great, isn't the same dev who made cm12 early builds? i will install after they fix the storage bug, i use my find7 as daily driver... so is a bit too early for me maybe
i hope that the new way to format sd cards as internal storage introduced in M could finally stop forcing me to deal with lvm/coldbird things
thanks for the interesting post and thanks to who made mirrors of course
Click to expand...
Click to collapse
Too bad lvm is officially a way to have all internal storage in one place. We can only hope cm will merge it in their rom.
StormTrooper89 said:
Too bad lvm is officially a way to have all internal storage in one place. We can only hope cm will merge it in their rom.
Click to expand...
Click to collapse
I hoped it to, but afaik cm team never talked about any unificatiom method and in their official support they generally avoid this kind of workaround so if i can use a class 10 micro SD with decent results in installing and using apps will be fine to me..
EDIT: i find out a way to open that site with firefox and downloaded the description.txt in the folder, translated from chinese to english with google translator and got this:
Here is stored in the adaptation to Android6.0 Find 7 (CM13)
Subdivision Related:
Android 6.0 the vold dynamically mounted storage, but there seems to be some bug, for Find7 factory district ext4 format internal card mount has a problem, but the 5.0 merge partition is no problem
Screen Related:
CM kernel Find 7 Standard Edition R63419 batch of LCD compatibility is not good, resulting in the video, so this batch friend patience omnirom good caf drive there merge
Brush into the method:
1. brush into twrp recovery
2. Enter TWRP, Shuangqing, brush into ROM package, bug fixes package, ROOT patch, RE Manager patch (Standard Edition plus brush find7s_patch.zip)
3. Restart, eating cotton candy bars
Known bug:
1.NFC
2. Camera incidental FC
3. Built-in browser has problems
The built-in file manager as a problem, put a patch RE Manager
Click to expand...
Click to collapse
the translation is bad but seems that also a couple of zips has to be flashed apart from the rom itself and the gapps, for sure for rooting i see in the folder that the dev has put supersu 2.52 beta
Keeping a close eye on this thread so I can test as soon as the main bugs are handled
downloading via browser ends browser application... i tried downloading fdroid apk...
So anyone try to merge the stock oppo storage "3GB(apps)+23GB(video,photos,music, etc...)" with new Android M format function??
http://www.androidpolice.com/2015/0...or-accessed-normally-with-no-additional-apps/
can someone link me a gapps package compatible with this rom? the one i used broked the installation wizard and i can't go on
-lorenzo- said:
can someone link me a gapps package compatible with this rom? the one i used broked the installation wizard and i can't go on
Click to expand...
Click to collapse
http://downloadmirror.co/android/ss
Worked for me...
spoonymoon said:
Edit: but why flash cos first??, there's no lvm or special remapping needed, it's cm13??
Click to expand...
Click to collapse
You need to flash ColorOS because of the Modem issue. The original CM source code used the ColorOS 4.3 Modem as reference and built their ROM. And they still continue to use that source so just for installing the 4.3 modem, you have to install COS 1. ( Note: If incompatible modem is used, your carrier service would not work and you will not receive any signal )
There is a newer version out today, but i can't download it from "baidu"! Maybe someone can add it to driver folder?
Nu_Pogodi said:
There is a newer version out today, but i can't download it from "baidu"! Maybe someone can add it to driver folder?
Click to expand...
Click to collapse
added
Just me with bootloop on today's version?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction
This is a build of the AOSP 6.0 for the Ascend Mate7, based on tag android-6.0.0_r1. This is the sum of all my and every contributors (listed at the end of this post) efforts until now, if you followed the entire project.
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Reboot!
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. Only MT7-L09 is supported for now, please test on TL10 and contribute!
MT7-L09
Releases page, direct links below:
[2016/09/20] v0.0.1beta - Changelog | Download
[2016/10/05] v0.0.2beta - Changelog | Download
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka
Source Code: https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.0.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 2016-10-18
Thanks...but its not very clear with: Do a factory reset from recovery, wipe everything under /data or you will face a bootloop.....
You mean wipe only data or all.....under Wipe...Advanced Wipe...Dalvik/ART Cache....Cache...Data...Internal Store and System and then
By using fastboot in TWRP (USB attached and holding Volume down when booting) flash boot and system images and Reboot...Did i understand it right or not?
nice job btw
i want to use it so bad but i need gps for working so i cant flash. looks like gonna be more waiting for me
Thanks gabry3795!!!
Ciao
Skorpi58 said:
Thanks...but its not very clear with: Do a factory reset from recovery, wipe everything under /data or you will face a bootloop.....
You mean wipe only data or all.....under Wipe...Advanced Wipe...Dalvik/ART Cache....Cache...Data...Internal Store and System and then
By using fastboot in TWRP (USB attached and holding Volume down when booting) flash boot and system images and Reboot...Did i understand it right or not?
Click to expand...
Click to collapse
Sorry for this, I updated the instructions now to be clearer
gabry3795 said:
Sorry for this, I updated the instructions now to be clearer
Click to expand...
Click to collapse
Thank You...now more better, but 'Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset' there are the following points under advanced Wipe....which one are to be delete?
Skorpi58 said:
Thank You...now more better, but 'Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset' there are the following points under advanced Wipe....which one are to be delete?
Click to expand...
Click to collapse
Now I understand, you have twrp 2.7.0.. Wipe Data, Cache and Dalvik Cache but if you have problems try to flash suggested twrp
gabry3795 said:
Now I understand, you have twrp 2.7.0.. Wipe Data, Cache and Dalvik Cache but if you have problems try to flash suggested twrp
Click to expand...
Click to collapse
Thanks....and the same with TWRP 3.0.2.0 or something other?
Skorpi58 said:
Thanks....and the same with TWRP 3.0.2.0 or something other?
Click to expand...
Click to collapse
With twrp 3.0.2.0, when you go to the Wipe section you will find "Swipe for Factory Reset" on the bottom of the screen and that's enough for get the rom booting
gabry3795 said:
With twrp 3.0.2.0, when you go to the Wipe section you will find "Swipe for Factory Reset" on the bottom of the screen and that's enough for get the rom booting
Click to expand...
Click to collapse
Thank You so much...Now it's all Clear for me and i'll try at the Weekend....i downloaded still the Beta Version
Installed and booted as expected... Pros and cons... I believe It is not usable as daily Driver....
No brightness control
Only SIM 1 detected
No BT
No FM Radio
No Camera
fmurillo said:
Installed and booted as expected... Pros and cons... I believe It is not usable as daily Driver....
No brightness control
Only SIM 1 detected
No BT
No FM Radio
No Camera
Click to expand...
Click to collapse
I'll try it now on my L09
Haha ... That's awesome news Gabry. Can't say for how long I waited this, really good job mate ! I'm willing to test when I have some free time and don't need full working state. Only issue that retains me to flash it right now is the gps I use daily for trafic ... other than that, other features are useless for me. Hope to get my hands on soon. Keep it up ! Cheers.
Envoyé de mon HUAWEI MT7-L09 en utilisant Tapatalk
You got a way I(we) can donate to you?
Dear @gabry3795. i installed the Rom yesterday ... Pure Android is really Super ...thanks for your effort and work...
but as also you know, there are really many bugs and it closes the launcher, gallery, camera etc by itself ... I also couldn't restore my apps from the backup of TWRP and also Titanium backup again....
sbeaber4 said:
You got a way I(we) can donate to you?
Click to expand...
Click to collapse
Thank you for this thought, and thanks to everyone wants to do it, I really appreciate it. I updated my donation info on my profile. I'm sorry to offer only an unstable beta, result of an occasional work, for now but it's the best that I could do.
gabry3795 said:
Thank you for this thought, and thanks to everyone wants to do it, I really appreciate it. I updated my donation info on my profile. I'm sorry to offer only an unstable beta, result of an occasional work, for now but it's the best that I could do.
Click to expand...
Click to collapse
but we hope and think that you will continue to work, or?
@gabry3795 ussd code not work . many crash system setting . not choice reboot
@gabry3795 how can I contribute to the project, I have MT7-TL10
please please don't let this project die like all the rest...