Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Hi I bring F2FS kernel for e975!
What is F2FS?(http://en.wikipedia.org/wiki/F2FS)
F2FS (Flash-Friendly File System) is a flash file system created by Jaegeuk Kim at Samsung for the Linux operating system kernel.
The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
F2FS much faster than EXT4
*I already tested only CM 4.4*(not for STOCK)
Features
-Based on CM Kernel
-Linux 3.4.101
-Linaro 4.9
-F2FS
-CPU Voltage Control
-Fsync
-iphone color preset
-gamma control
-Low Cpu Clocks
-Optimization Governors
-autosmp
-ETC..
/*Kernel Installation*/
1. http://d-h.st/Z7N (v3.0) Download and enter recovery
2. Wipe Cache & Dalvik Cache
3. Flash Sail_v*.zip
4. Enjoy!
/*Switch to F2FS*/
!!WARNING!! You will LOSE ALL your data .(Photos, Videos, Music, etc)
1. http://d-h.st/SMh & http://d-h.st/SdW(RecoveryV1) Download and enter recovery
2. Flash
3. Reboot Recovery
4. Select "Wipe and Format Options"
Select "Custom Format Options"
Select"toggle f2fs <-> ext4 migration"
Select"format /cache -> f2fs ->Yes"
Select"format /data and /data/media (/sdcard) -> f2fs -> Yes"
5. Update to Newest kernel. http://d-h.st/Z7N (v3.0)
6. Enjoy!
!!!you flash rom or boot.img when flash before f2fs you must flash this F2FS boot.img.zip http://d-h.st/Z7N
Sorry for my bad English. Thanks.
Source : https://github.com/Docker-J/lge-kernel-gproj
Thanks to
CM
arter97
anarkia1976
mrg666
faux123
franciscofranco
Philz
flashed successfully on xenonhd rom.. ,.......... hopes a better battery life... :good:
Could this be flashed on Gee ROM based or should i wait for further release?
You couldn't. I'll work and release as soon as possible.
Sent from my LG-E975 using XDA Free mobile app
Awesome! I notice a much much better performance using f2fs on my n7. Does it need a modded recovery and ROM as well?
It is true, that i will lose my data like music because of F2FS? Or it´s just like other kernels?
RE: f2fs
kaspakind said:
It is true, that i will lose my data like music because of F2FS? Or it´s just like other kernels?
Click to expand...
Click to collapse
Yes u will loose each and everything so backup as the OP said in his post, second thing its a file system so it will change ur current file system like ext4 in to f2fs and you need the recovery plus the working kernel to operate f2fs. As OP mentioned, its not for stock.
Regards
[email protected] said:
Yes u will loose each and everything so backup as the OP said in his post, second thing its a file system so it will change ur current file system like ext4 in to f2fs and you need the recovery plus the working kernel to operate f2fs. As OP mentioned, its not for stock.
Regards
Click to expand...
Click to collapse
I´m on TWRP 2.6.3.0. So i can use the kernel on CM 11 or on gproj based roms?
grunch21 said:
Awesome! I notice a much much better performance using f2fs on my n7. Does it need a modded recovery and ROM as well?
Click to expand...
Click to collapse
I already modded recovery. recovery include in f2fs for e975.zip
Sent from my LG-E975 using XDA Free mobile app
kaspakind said:
I´m on TWRP 2.6.3.0. So i can use the kernel on CM 11 or on gproj based roms?
Click to expand...
Click to collapse
Sure
Sent from my LG-E975 using XDA Free mobile app
junesoung said:
Sure
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
What about Phils?
Sent from my LG-E975 using Tapatalk
junesoung said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Hi I bring F2FS kernel for e975!
What is F2FS?(http://en.wikipedia.org/wiki/F2FS)
F2FS (Flash-Friendly File System) is a flash file system created by Jaegeuk Kim at Samsung for the Linux operating system kernel.
The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
F2FS much faster than EXT4
*I already tested only CM 4.4*(not for STOCK)
Features
-Based on CM Kernel
-Linux 3.4.91
-Linaro 4.9
-F2FS
-CPU Voltage Control
-Fsync
-iphone color preset
-gamma control
-Low Cpu Clocks
-Optimization Governors
-autosmp
-ETC..
F2FS Installation(F2FS support recovery included in 'F2FS for e975.zip')
!!WARNING!! You will LOSE ALL your data .(Photos, Videos, Music, etc)
1. http://d-h.st/GD7 Download and go to recovery
2. Wipe Cache & Dalvik Cache
3. Flash F2FS for e975.zip
4. Update to Newest kernel. http://d-h.st/8jh (v1.0)
5. Enjoy!
Normal kernel Installation(Non F2FS)
1. http://d-h.st/8jh (v1.0) Download and go to recovery
2. Wipe Cache & Dalvik Cache
3. Flash Sail_v*.zip
4. Enjoy!
Sorry for my bad English. Thanks.
Source : https://github.com/Docker-J/lge-kernel-gproj
Thanks to
CM
arter97
anarkia1976
mrg666
faux123
franciscofranco
Click to expand...
Click to collapse
Just flashed the no F2Fs version and I really like it , just one question, does this kernel bring Lgs thermal control enabled by default?
guidoido004 said:
What about Phils?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Philz recovery? Credit? I forget it. Add now
Sent from my LG-E975 using XDA Free mobile app
Galileo said:
Just flashed the no F2Fs version and I really like it , just one question, does this kernel bring Lgs thermal control enabled by default?
Click to expand...
Click to collapse
Enable temperature throttle on trickstermod
Sent from my LG-E975 using XDA Free mobile app
so if it's gproj kernel, will it work with Vanir 4.3.1?
the rom mentioned above works great with "f93 grpoj" kernel, so why the "sail" kernel doesn't work with this stuff?
I flashed without F2FS recovery (2nd method), i wanted to try ,how good it is
I've got a kernel crash (black screen , white text), anyway i stay tuned, because i really would try how much F2FS improves speed
banangrg said:
so if it's gproj kernel, will it work with Vanir 4.3.1?
the rom mentioned above works great with "f93 grpoj" kernel, so why the "sail" kernel doesn't work with this stuff?
I flashed without F2FS recovery (2nd method), i wanted to try ,how good it is
I've got a kernel crash (black screen , white text), anyway i stay tuned, because i really would try how much F2FS improves speed
Click to expand...
Click to collapse
I'll try to make kernel for 4.3
And 4.4? Would like to try f2fs and with your kernel on slimkat, and if it's going to be stable I think more users will try it
junesoung said:
I'll try to make kernel for 4.3
Click to expand...
Click to collapse
Thanks is advance this can be very usefull, because in my opinion , Vanir 4.3.1 is one of the best (real) gaming performance rom (not in benchmarks), i think so, because every game runs much smoother on rom mentioned above, than any 4.4.2 builds (tested almost so much roms) even with OC , i know it's mainly kernel dependent, but i really feel the difference (almost 24k on Antutu with 4.4.2 and ak [email protected],84Ghz and not as much smoothnes in GTA SA, vs 21k with 4.3.1 rom @1,5Ghz and really smooth gaming on High Quality and Detailed Reflections on the same game)
There are of course many usefull features to add to ur kernel like IntelliPlug , and good thermal (like IntelliThermal) ,dt2w, gpu governors (e.g. simple governor) etc. Anyway, I don't know how to build own kernel, and I suppose it's a really hard work to make a ultra fast kernel with a lot of features so look at it with distance.
sorry if I'm too pedantic I'm just a smartphone perfectionist
junesoung said:
Philz recovery? Credit? I forget it. Add now
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Lmao. I meant if it works. Haha. Tho you answered anyway. Thanks!, ^^
Enviado de meu LG-E975 usando Tapatalk
Very interesting idea, nice kernel.
Maybe a bit difficult to stay with but this thing sounds interesting, not bad.
Keep up the good work
Sent from my LG-E975 using Tapatalk
Related
Note: Posting this on behalf of ytt3r. I will be maintaining this thread on Team Talon's behalf.
Happy hump day! This is TalonMTD, for CM7 and MIUI (and potentially other MTD based ROMs). This kernel has nearly all of the features of TalonDEV--and more coming sooner than later. Lets get straight into it!
Code:
Features
[LIST]
[*]Overclock up to 1440MHz/Undervolt for all frequencies (having only 5 frequencies undervolted seems most stable)
[*]Nexus S Framebuffer
[*]Voodoo Color v2 (No yellow tint!)
[*]Voodoo Sound v10
[*]Based on Linux kernel 2.6.35.13
[*]GPU overclock
[*]GPU Tweaks
[*]Bonus Governors: InteractiveX, Smartass, Conservative governor compiled as a module (not enableable yet)
[*]Bonus Schedulers: SIO, V(R), BFQ2r1, CFQ with tweaks
[*]Undervolted ADC and RAM
[*]Disabled Userspace governor
[*]Kangsterizer’s LED notifications
[*]Asynchronous I/O support
[*]Logcat compiled as a module, must be enabled via ‘logcat-on’
[*]Lowmemorykiller tweaks by kodos96
[*]Jhash3
[*]RAM tweaks
[*]Readahead tweaks
[*]Kernel HZ set at 250
[*]Disabled kernel printk for less overhead
[*]KTLO (Keep the Lights On)
[*]Samsung ARM fix
[*]16.25 lbs. of ext4 fixes
[/LIST]
Code:
#include <std/disclaimer.h>
/*
* While this build is heavily optimized, it is also capable of pushing your Captivate
* much harder. I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or the current economic crisis. Please do some
* research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modificiations, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
You can download it here...
0.0.3: http://dl.dropbox.com/u/9426310/TalonGalaxyS-0.0.3.zip
Source code: http://existz.darkirc.info/git/?p=kernel/talonmtd.git
Join us on freenode, channel #suckerpunch for support.
Many thanks to my co-devs eXistZ, kodos96, and zacharias.maladroit/zachy_md. (original Talon thread here: http://forum.xda-developers.com/showthread.php?t=1050206)
Huge thanks to
Supercurio
Teamhacksung
morfic
netarchy
TheEscapist
TK-Glitch
kangsterizer
And a great big final thanks to my testers, the great folks who put up with me breaking stuff and putting up a new build every 5 minutes, the guys who pushed me to greater heights to get stuff done:
Shoman94
Vivified (the great motivator)
Thegodsquirrel
Abee_13
lownox
Wanna say thanks? Buy me a root beer, and/or hit thanks!
Addendum: This is relatively untested on the i9000 as the main testing was done in Captivate.
0.0.3 (Maintenance Upgrade)
TONS AND TONS of ext4 fixes (more info here: http://existz.darkirc.info/git/?p=kernel/talonmtd.git;a=shortlog)
Minor upstream fixes including call volume tweak
0.0.2
Improved USB signal quality
OndemandX governor (offers sleep power consumption improvements over ondemand, not ready for the big time yet. Seems to cause 3D choppiness.)
Fixed enable_conservative script (released separately, coming soon)
Upstream DVFS fixes
Many more ARM fixes (for more information visit http://existz.darkirc.info/git/?p=kernel/talonmtd.git;a=shortlog and take a look at the ARM fixes)
Low power mode support (buggy)
Upstream touchkey tweak to prevent accidental button pushing
BUMPED OVERCLOCK VOLTAGES--People were reporting serious instability, so I bumped the voltages. This should fix the majority of issues.
init.d cleaning script from zacharias.maladroit
Major tweaks from Infuse to help with CPU scaling above 1000 MHz
Im usually all about constructive comments... but..
I love you.
That is all.
hi, i'm new to miui rom, after flash this kernel...if not suitable, how to flash back to ori kernel?
minjiet said:
hi, i'm new to miui rom, after flash this kernel...if not suitable, how to flash back to ori kernel?
Click to expand...
Click to collapse
You mean the original kernel that comes with MIUI? You can flash the CWM zip for the kernel itself. If the CWM zip is not available, you only have the full CWM ROM zip, you could:
1. Remove all instances of system files in the zip and only keep the kernel (in the updates dir) and the META-INF
2. Edit the updater-script in the META-INF and only leave the kernel copying procedure
3. Run the CWM zip in recovery mode.
This is what I usually do in Samsung based ROMs. It might be a little different for MIUI/CM7, or you could flash any other CM7/MIUI kernels using their CWM flasheable zips.
Let me know if you're unsure of what you need to do and I'll offer you support in the IRC instead.
totally clueless....please guide me step by step.
thanks
minjiet said:
totally clueless....please guide me step by step.
thanks
Click to expand...
Click to collapse
Come to the IRC. I'll guide you step by step
Edit: http://webchat.freenode.net #suckerpunch
fuyooohhhh, new kernel for cm7! :clap:
Im on MUIU and lost recovery trying to flash the above kernel with rom manager. Is there a way i can odin a muiu kernal? the phone boots to muiu but cant access recovery...
illusion786 said:
Im on MUIU and lost recovery trying to flash the above kernel with rom manager. Is there a way i can odin a muiu kernal? the phone boots to muiu but cant access recovery...
Click to expand...
Click to collapse
Try using Heimdall to flash the boot.img of another custom kernel.
heimdall flash --kernel /path/to/boot.img
thanks for the reply, it did flash but i didnt get cwm recovery to load. it just shows the triangle.
illusion786 said:
thanks for the reply, it did flash but i didnt get cwm recovery to load. it just shows the triangle.
Click to expand...
Click to collapse
Not sure what triangle you're mentioning there. Can you post up a screenshot?
If you've successfully flashed the boot.img using Heimdall in download mode, can you boot the phone?
i can boot the phone, thats not a problem... I cant get access to recovery.
when i try to boot to recovery i get a triangle and a file next to it.
dont worry about it, ill just full flash it again.
so far not very good - instant freeze after boot and than it restarts itself.
Also uses old recovery - absolutely not a big deal, just something that catches eyes and fingers.
Sent from my GT-I9000 using xda premium
illusion786 said:
i can boot the phone, thats not a problem... I cant get access to recovery.
when i try to boot to recovery i get a triangle and a file next to it.
dont worry about it, ill just full flash it again.
Click to expand...
Click to collapse
That's download mode.
Sent from my GT-I9000 using xda premium
dupel said:
so far not very good - instant freeze after boot and than it restarts itself.
Also uses old recovery - absolutely not a big deal, just something that catches eyes and fingers.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you clear oc/uv settings? Voltages might be a little different than other kernels.
Sent from my Inspire 4G using XDA app
existz said:
Did you clear oc/uv settings? Voltages might be a little different than other kernels.
Sent from my Inspire 4G using XDA app
Click to expand...
Click to collapse
Didnt do it manually, assumed script would do it (glitch and platypus do). Will try out again later when I get back home. If it didnt clean scripts, there could be a lot left from platypus I guess.
Sent from my GT-I9000 using xda premium
wow thanks !!!
I was just wishing for days for this to happen !!!
please, can you implement ZRam and Memory Freak app for CM7 ?
heheh Talon Dev when on Samsung Roms and Talon MTD when on CM7 / MIUI
( yes , i am constantly rotating between those, i currently love MilkyMod and CM7. Latest Miui is also very nice )
this rom is awesome , i get about 190 - 196 free ram everytime i use the app killer(the inbuilt one in miui) , im on galnet chameleon rc2 , its super smooth , only bug i found till now is that the overclock is very very unstable , it freezes even at 1.2 ghz , previously i could go upto 1.4 stable and 1.5 for benchmarks
It's really great to see the TalonDev team on CM7.
I'm loving your kernel on my stock rom
And now on CM7... OHH MY GOD HOW CAN I CHOOSE BETWEEN ZACK AND TALON KERNEL
CyanogenMod 13 For F320
Please NEVER upload this rom to other forum or file share service.
Please contact me before modifying this rom.
Originally Posted by cyanogen
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Recommend Recovery : TWRP 2.8.7.X or above
Working on CM13
- Cellular(Call&Data)
- Wi-Fi
- GPS
- Sensors
- seLinux
- SD Card(w/ exFat FS)
- and all features except below
Not Working on CM13
- VoLTE
Known Bugs
- Not reported
Change Log
- Sep 4
* Merge latest kernel and device sources from cyanogenmod
- June 12
* Merge latest kernel and device source
* Fix battery icon width
- May 15
* Kernel Timer changed(100hz to 300hz). it increases performance without more power costs.
* TCP buffer define location changed(init -> overlay)
- Apr 10
* Fix Lockscreen's shortcut starts apps(camera, googlenow, etc...) while touch other area.
- Apr 3
* increase speak volume from F320K Stock Lollipop's mixser_path.xml
* merge d802 kernel, g2-common source.
- 14 feb
* fix media playback error when seek.
* change default governor to ondemand and customize for msm8974 ap.
* change iosched on init.g2.rc ( bfq -> fiops: for more battery)
* fix invalid number.
- 27 Jan
* sync latest cyanogenmod repos. system is more stable.
- 10 Jan
* Update init.g2.rc
> android 6.0 has changed storage mount like externalSD or USB OTG.
I change storage mount(fstab and etc...). Now can Boot!
* Change Default Governor: SmartassH3
* Change Default IO Sched: fiops
* update power_profile for f320*
- 8 Jan
* rebase all source
- 25 Dec
* Add IOSCHED, CPU GOV, ExtSD, EXFAT
Installing Guide
Precondition :
KK Bootloader and LP BootStack are required in order to install this ROM.
You may also need new Modem for working radio
1. Flashing LP BootStack (If upgrade old version, this is not needed)
1-1. Wipe factory reset, Wipe /system (IMPORTANT, Never Dirty Flash from CM-12.1 or others.)
2. Flashing Modem(If you first install)
3. Flashing CM13
4. Flash Gapps
5. Reboot
Source Code
Github : https://github.com/whdgmawkd
android_device_lge_f320, android_device_lge_g2kr-common,android_kernel_lge_msm8974_kr
Special Thanks to
CyanogenMod (Rom Source)
TheMuppets (CM vendor)
lg-devs (LP BootStack)
mpeople (KitKat Bootload for each F320S/K/L)
Download Link
I'm not fluent in English. Sorry for my poor English.
Modem : https://www.androidfilehost.com/?w=files&flid=46208
It was included KitKat Bootloader and LP Modem and etc.
Stable ROM : https://www.androidfilehost.com/?w=files&flid=46198
Download "cm-13.0-20160903-UNOFFICIAL-f320.zip"
Customized ROM by @pipyakas : https://www.androidfilehost.com/?fid=24591023225176446
* Changelog
- Compiled with UBERTC 5.3 for the rom and Architoolchain 4.9 for the kernel
- -O3 optimization flag, I'm working on further optimizations like graphite or full archidroid optimizations
- 3.4.112 linux kernel, I added 2.65ghz CPU OC and 650mhz OC, for the kernel I'm trying to implement zram and fastcharge, also I'm looking to modify ondemand governor for better balanced between performance and battery
This is my experimental build with some changes I like, everyone feel free to test it and give me feedbacks, also any advice would be awesome as I only have a month of experience in android building
Gapps : Use anything support 6.0.X. Recommend OpenGapps.
Merry Christmas.
Thank you for your work.
I shall test it. if it has the same bug i have with another marshmallow rom, i will re use the report i did on the prev rom. wish me luck
It won't boot on my F320L. It gets stuck at LG logo. My steps: Wipe data, cache, system, dalvik. Install F320L_KK_bootloader_plus_LP_bootstack.zip. Reboot to recovery. Install ROM. Is it supposed to boot on F320L?
wont boot on f320k. tried from Vanir 6.0.1 (f320 also) and didn't work. there is no reason for me to flash a bootloader/stack because I am on marshmallow. Please help
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
adriannxda said:
It won't boot on my F320L. It gets stuck at LG logo. My steps: Wipe data, cache, system, dalvik. Install F320L_KK_bootloader_plus_LP_bootstack.zip. Reboot to recovery. Install ROM. Is it supposed to boot on F320L?
Click to expand...
Click to collapse
For F320S/K
somboons said:
For F320S/K
Click to expand...
Click to collapse
Previous versions cm12.1 booted and worked fine. It should work on F320L outside Korea.
did anyone manage to boot on this rom? mine won't go past the LG logo
f320s .The same as yous.can't boot with LG LOGO .
liusi522 said:
f320s .The same as yous.can't boot with LG LOGO .
Click to expand...
Click to collapse
I'm Hoping @parkjh0821 Senpai can fix this
planning on fixing the fact it won't go past the LG logo ? don't worry, take your time its usually like this on all first builds XD
I'm sorry for late.
I found It cant boot because rom has critical problem. but I dont know why it cant boot.
boot image is OK. maybe overlay(ExtSD Patch) make this problem.
but I dont have enough time to build new cm13.
it will take long time to release new build.
parkjh0821 said:
I'm sorry for late.
I found It cant boot because rom has critical problem. but I dont know why it cant boot.
boot image is OK. maybe overlay(ExtSD Patch) make this problem.
but I dont have enough time to build new cm13.
it will take long time to release new build.
Click to expand...
Click to collapse
It's not your fault. It's just your job no return.Just Do your own thing.
When you have a new building in your free time, I'll test.Thanks
its ok. take ur time. aslong as in the end, we will have a booting cm13
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
parkjh0821 said:
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
Click to expand...
Click to collapse
Continue trying, good luck!
parkjh0821 said:
new version released.
but still cant booting.
need more tester and feedback.
my device cant boot this rom with KK bootloader.
stuck at bootanimation and /data partition has no files, only folders
Click to expand...
Click to collapse
Thank you for your work.I will test tomorrow .
tested
wont go through the cyanogen mod boot animation
Pay attention:
At the moment the builds are for testing purposes.
Working features:
Audio
Receiving and making calls
GPS
Hardware sensors
Legacy sensors / Virtual sensors
Wifi
Bluetooth
MTP
HW accelerated gui
HW accelerated video
Camera
USB/Wifi tethering
MicroSD exFAT support
F2FS system partition
What's new??:
-Pre-rooted
-Gapps Included
-Nova Launcher As Default Launcher
-New Music Player
-New Tweaks
-Much more..
Not working features:
Let me know...
Disclaimer:
Your warranty is now void.
We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you.
Click to expand...
Click to collapse
How to install the rom:
If you're coming from a stock rom, a previous Android version (CM 9, CM 10, CM 10.1, CM 10.2 and derivatives) or if you have a CM 11.0 older than Release 15, read carefully the following steps
-Download the rom
-Reboot inside TWRP recovery, because now you must be sure to use the new one (inside TWRP, Home -> Reboot -> Recovery)
-Wipe Data,cache as ext4 or f2fs partition (Wipe -> Advanced Wipe -> Select Data -> Repair or Change File System -> Change File System -> EXT4 or F2FS -> Swipe)
-Install the rom package
-Reboot the system
Downloads:
https://www.androidfilehost.com/?w=files&flid=53402
Credits and Thanks to:
CyanogenMod Team for the huge work
New Macław for his development on this device and cm12
BETA-TEAM for support
Mtkhack TEAM
XDA:DevDB Information
CyanogenMod 12.1 For Galaxy S3 mini, ROM for the Samsung Galaxy S III Mini
Contributors
althafvly
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Testing
Created 2016-04-03
Last Updated 2017-02-01
Reserved
I see new tweaks Ill try what this rom can do.Thanks for cooking
Awesome am liking that people are taking a interest in the S3 Mini downloading rom now i will reply results
No one trying??. ??
althafvly said:
No one trying??.
Click to expand...
Click to collapse
bcuz you playboy ,why not focus on "full advance" first
tested works good but words are really small and battery life is the same has CM12.1 by maclaw really drains fast even on standby
JohnnyMwanza said:
tested works good but words are really small and battery life is the same has CM12.1 by maclaw really drains fast even on standby
Click to expand...
Click to collapse
i will try to improve. after full advance's next build
taikuda said:
bcuz you playboy ,why not focus on "full advance" first
Click to expand...
Click to collapse
ya. i will .just finished my exams
Does Offline charging works with animation?
zytrix78 said:
Does Offline charging works with animation?
Click to expand...
Click to collapse
no animation
althafvly said:
no animation
Click to expand...
Click to collapse
For what duplicated rom?
New Macław said:
For what duplicated rom?
Click to expand...
Click to collapse
not duplicated.added some new features to ur cm12... .
Any chance on BLN?
No offence dude, but why don't you work on something different or something new? Like 6.0.1 marshmallow- or atleast sort out full advance first.
I'm full advance rom fan! Flashed since released. Hope there will be update. Btw i will try this cm build when i got time. Thank you sir for great support for our beloved old phone.
*Sorry if i goes off topic
Hello!
I like having some features and GAPPS included, it's just a bit more comfortable and takes less time.
Could you please give somewhat more information about what tweaks you have done?
And: Do you think you could add ZSWAP support to the ROM?
Thank you!
How is this rom going on??
Is it fast?'?
Voip calls are working??
Elmarigo said:
Hello!
I like having some features and GAPPS included, it's just a bit more comfortable and takes less time.
Could you please give somewhat more information about what tweaks you have done?
And: Do you think you could add ZSWAP support to the ROM?
Thank you!
Click to expand...
Click to collapse
Yes
Sent from my MotoG3 using XDA-Developers mobile app
Samir96 said:
I'm full advance rom fan! Flashed since released. Hope there will be update. Btw i will try this cm build when i got time. Thank you sir for great support for our beloved old phone.
*Sorry if i goes off topic
Click to expand...
Click to collapse
I will try to update soon
Sent from my MotoG3 using XDA-Developers mobile app
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in these MODS before
* flashing it! YOU are choosing to make these modifications, and if you point
* the finger at me for messing up your device, I will laugh at you.
F2FS-ready TWRP info: post #2
minamo-g4-kernel(outdated, no update) info:
note: all minamo-g4-kernel's features are included in LlamaSweet Kernel
https://github.com/genesixx/LlamaSweet-msm8992/commits/cm-13.0?author=lindwurm
minamo-g4-kernel (OUTDATED, NO UPDATE)
Source
https://github.com/mordiford/minamo-g4-kernel
Features
https://github.com/mordiford/minamo-g4-kernel/wiki#features
Downloads
https://github.com/mordiford/minamo-g4-kernel/wiki/Download
Thanks
@genesixxbf3 - minamo-g4-kernel is based on https://github.com/genesixx/Llamasweet-msm8992 R4 release
CyanogenMod devs - kernel's update cherry-picked from https://github.com/CyanogenMod/android_kernel_lge_msm8992
@alucard_24 - imported alucard CPU Governor
UNOFFCIAL F2FS-ready TWRP for LG G4 (H815/H811)
1. What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system initially developed by Samsung Electronics for the Linux kernel.
The motive for F2FS was to build a file system that, from the start, takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
from: https://en.wikipedia.org/wiki/F2FS
Click to expand...
Click to collapse
It has higher random-write performance than others.
2. Download F2FS-Ready TWRP
Official TWRP can't mount f2fs. please use my TWRP.
H815: https://www.androidfilehost.com/?fid=24549084345926305
H811: https://www.androidfilehost.com/?fid=24566382913912854
3. How to use F2FS on Your G4!
Note: Change Data Partition to F2FS will DELETE ALL DATA include Internal Storage!!
and you can't mount /system as F2FS. ONLY /data and /cache are supported.
Reboot to TWRP,
Wipe -> Advanced Wipe -> Data, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Wipe -> Advanced Wipe -> Cache, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Reboot -> Recovery
Wipe -> Advanced Wipe -> System -> (Swipe to Wipe)
Install -> 1. ROM, 2. minamo-g4-kernel, 3. GApps, 4. extra -> Reboot system
I recommend clean install if you change File System.
4. Known Issues
plz tell me
5. FAQ
later
6. Thanks
TeamWin
omnirom
jakew02
codeworkx
7. Codes
https://github.com/mordiford-old/omni_device_lge_h815
https://github.com/mordiford-old/omni_device_lge_g4-common
https://github.com/mordiford-old/omni_kernel_lge_msm8992
@1indwurm
This is awesome! I'm going to be trying this some time this weekend probably, after a few people have reviewed the kernel. I'm especially glad that someone has taken over genesixxbf3's kernel- thank you!
Also, have you experienced any issues with the new F2FS file system? I've heard many good things about it, but this phone is my daily driver and I want it to be as stable as possible/
This kernel provides awesome battery life! I'm so amazed about it. Unplugged my phone 14 hours ago and still have 80% battery (I gotta admit I didn't use it much today). This is crazy!
Amazing! :highfive:
Sent from my LG-H815 using XDA Labs
1indwurm said:
Optional: Use F2FS on your G4
Official TWRP can't mount f2fs. please use my TWRP.
https://www.androidfilehost.com/?fid=24549084345926305
Note: Change Data Partition to F2FS will DELETE ALL DATA include Internal Storage!!
Reboot to TWRP,
Wipe -> Advanced Wipe -> Data, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Wipe -> Advanced Wipe -> Cache, [Repair or Change File System] -> Change File System -> F2FS -> (Swipe to Change)
Reboot -> Recovery
Wipe -> Advanced Wipe -> System -> (Swipe to Wipe)
Install -> 1. ROM, 2. minamo-g4-kernel, 3. GApps, 4. extra -> Reboot system
I recommend clean install if you change File System.
Click to expand...
Click to collapse
are you gonna make a twrp with f2fs for the h811
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
vlc_marcos said:
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
Click to expand...
Click to collapse
Use the Resurrection Remix Or CM
vlc_marcos said:
Hi guys, I want to use this F2fs because it made wonders in my OPO so I think It can do the same here.
So my question is, what rom can be used with this kernel?
Thank you all
Click to expand...
Click to collapse
I'm using tipsy ROM with it
Follow_and_Feel said:
This kernel provides awesome battery life! I'm so amazed about it. Unplugged my phone 14 hours ago and still have 80% battery (I gotta admit I didn't use it much today). This is crazy!
Amazing! :highfive:
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
What Governor you using?
Spaceboy60 said:
What Governor you using?
Click to expand...
Click to collapse
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Follow_and_Feel said:
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Ok, thanks. What program are you using to set that cause kernel aduitor doesn't have screen on /off settings I don't think.
gillim74 said:
I'm using tipsy ROM with it
Click to expand...
Click to collapse
What the hell is tipsy?
Follow_and_Feel said:
Intelliactive when the screen is on and Zzmoove when the screen is turned off
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
How can I set thi? With tasker? And if yes, how to do that with tasker?
RogerF81 said:
What the hell is tipsy?
How can I set thi? With tasker? And if yes, how to do that with tasker?
Click to expand...
Click to collapse
Its a ROM by ground zero projects.which version g4 do you have
gillim74 said:
Its a ROM by ground zero projects.which version g4 do you have
Click to expand...
Click to collapse
Ah thank you. I just googled it. It's only for h811?? I have the h815 version. How many ROMs are out there which I don't know? I have the impression that on xda there are only 50% of ROMs listed...:crying:
I am a little bit confused. Can i flash this kernel over CandySix?
dd0s said:
I am a little bit confused. Can i flash this kernel over CandySix?
Click to expand...
Click to collapse
You should be able too
is the heating issue solved ? when i installed your first release my device gets mega hot while charging
Spaceboy60 said:
Ok, thanks. What program are you using to set that cause kernel aduitor doesn't have screen on /off settings I don't think.
Click to expand...
Click to collapse
No it hasn't. A simple profile in the app "tasker" is triggered when the screen is on/off and changes the governor accordingly
Is there or will there be an H811 TWRP to change file systems?
castkel said:
Is there or will there be an H811 TWRP to change file systems?
Click to expand...
Click to collapse
I asked that too but got no reply
DISCONTINUED
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
*or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Phoenix KernelMARSHMALLOW
Disclaimer:
*** This kernel is for the Moto X Play only. Some features are experimental. Proceed with caution. ***
Hello guys this is the Marshmallow version of Phoenix Kernel. Based on latest source from Motorola. Optimized for performance and stability. Improved performance and stability, compiled with GCC 4.8 for stability. Use Kernel Adiutor for managing kernel parameters.
Features
Added fsync on/off support by franciscofranco
Added sys kernel interface to configure linux printk
Added support msm: mdss: KCAL
Tcp_output: set initial TCP window size to 64K (speed improvement)
Use Android device as a USB keyboard/mouse
Vibe strength control
CRC Toggle
Enabled Arch power and Disabled GFS
Frandom
Reduced modules only wlan module now
Disabled add random
Disabled BCL
Boot on all CPUs
Reduce vfs cache pressure
LED Notification support
Temperature limit control
NTFS r/w
CIFS
MSM Limiter
Some optimizations too
Code:
[B]CPU Hotplugs:[/B]
[SIZE=3]MSM Hotplug (with SMP Boot infrastructure, Hotplug Boost, Wakeup Boost)[/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=3]Impulse[/SIZE]
Code:
[B]IO Schedulers:[/B]
[SIZE=3]BFQ
SIO
FIOPS[/SIZE]
How to install:
Download Phoenix kernel
Copy it into storage
Reboot into recovery
Do a backup if u want
Install Phoenix kernel
Reboot
Credits:
franciscofranco
neobuddy89
flar2
sultanqasim
myfluxi
andip71
anarkia1976
Cl3Kener
Alberto97
savoca
Downloads:
See the attachment or Download
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux_mm
Kernel Special Features:
Version Information
Status: Testing
Created 2016-07-15
Last Updated 2016-07-15
Reserved
Reserved
I have been waiting for this!!!! Thank you.
No sim detect
Sent from my XT1562 using XDA-Developers mobile app
@mw1man no problems here with dualsim. i converted my single sim to dual today and flashed phoenix kernel over stock.
Also the kernel runs pretty smooth so far. I changed the cpu governor to impulse and lowered the minimum cpu freq of the big cluster to 400 MHz. Will report back!
mw1man said:
No sim detect
Sent from my XT1562 using XDA-Developers mobile app
Click to expand...
Click to collapse
Is there a reason you are using the lollipop modem?
thanks!with stock kernel i tryied to charge another phone through my otg cable.the other phone was charging really slow.like from PC.when we tryied to charge also the other phone with a sony M5 (i think) M5 was charging it like normal charger!can anything be done with this issue?
With koffy no problems with the sim
Sent from my XT1562 using XDA-Developers mobile app
Unfortunately the LED still requires the workaround :/
Leni_YO said:
Unfortunately the LED still requires the workaround :/
Click to expand...
Click to collapse
As this is a rom "bug" there is nothing a kernel can do afaik
mw1man said:
No sim detect
Sent from my XT1562 using XDA-Developers mobile app
Click to expand...
Click to collapse
Tested on both CM and Stock. There's no such issue for me. Anyone else facing the same issue ?
AnoopKumar said:
Tested on both CM and Stock. There's no such issue for me. Anyone else facing the same issue ?
Click to expand...
Click to collapse
Working fine here. I guess its due to the lollipop modem he is using.
Sent from my XT1562 using XDA-Developers mobile app
kexec hardboot compatible ?
i have squid kernel.. can i flash over squid without problem? or first i have flash stock kernel and then phoenix kernel? thanks mate
Apparently hotplugging only works with Interactive Governor. Will continue testing with default settings.
EDIT: Ok I was wrong
tnap1979 said:
kexec hardboot compatible ?
Click to expand...
Click to collapse
For Multi rom. Its not required I guess. See the Multi rom thread.
Sent from my Motorola Moto X Play using XDA Labs
diegomartinezlovey said:
i have squid kernel.. can i flash over squid without problem? or first i have flash stock kernel and then phoenix kernel? thanks mate
Click to expand...
Click to collapse
Flash over any kernel, no need to flash stock.
This is great. Was waiting for another msm hotplug kernel. Just flashed on stock and running fine. Lets hope it doesnt reboot when reaching around 30% like ultra kernel did. Up and running. Thanks a lot.
Sickaxis79 said:
This is great. Was waiting for another msm hotplug kernel. Just flashed on stock and running fine. Lets hope it doesnt reboot when reaching around 30% like ultra kernel did. Up and running. Thanks a lot.
Click to expand...
Click to collapse
Works fine so far. Went to 10% without problems
Sent from my XT1562 using XDA-Developers mobile app