Develop Bugs

[Q] Where to find SU binaries for P600?

Hi All!
I'm stuck in the state where I cannot complete root after update. I have no idea why this happened. I used autoroot first time on a stock. Everything worked like a charm. However In order to install update I have installed xposed and few modules to hide reset flag. After that I was able to update stock. Problem is that after this running autoroot and installing stock recover does not help. I not getting root despite the fact that I see instalation successfully completed and other people report success.
So question is - were to get SU binaries for P600 and where to put them? I'm able to reboot in TWRP using ADB if this matter.
I would also glad to reflush latest stock, but I do not know how to do it, because KIES says i'm up to date.
Any help will be greatly appreciated.

CNemo7539 said:
Hi All!
I'm stuck in the state where I cannot complete root after update. I have no idea why this happened. I used autoroot first time on a stock. Everything worked like a charm. However In order to install update I have installed xposed and few modules to hide reset flag. After that I was able to update stock. Problem is that after this running autoroot and installing stock recover does not help. I not getting root despite the fact that I see instalation successfully completed and other people report success.
So question is - were to get SU binaries for P600 and where to put them? I'm able to reboot in TWRP using ADB if this matter.
I would also glad to reflush latest stock, but I do not know how to do it, because KIES says i'm up to date.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Have you tried updating Supersu from play store

lsherif said:
Have you tried updating Supersu from play store
Click to expand...
Click to collapse
Yes, I did. It says that binaries are not found.

CNemo7539 said:
Yes, I did. It says that binaries are not found.
Click to expand...
Click to collapse
Have you tried flashing SU zip? You should be good to go after flashing :good:
http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip

22sl22 said:
Have you tried flashing SU zip? You should be good to go after flashing :good:
http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
Click to expand...
Click to collapse
Thank you! Now I'm rooted again!

M8 won't root

I had a rooted M8, however something was going wrong as it constantly rebooted. So I did a factory reset and that fixed the problem. However now it won't root for some reason. I have TWRP recovery and flashed the root file however when I do root checker it stated that I do not have root access. Anyone know what's wrong?

ILowry282 said:
I had a rooted M8, however something was going wrong as it constantly rebooted. So I did a factory reset and that fixed the problem. However now it won't root for some reason. I have TWRP recovery and flashed the root file however when I do root checker it stated that I do not have root access. Anyone know what's wrong?
Click to expand...
Click to collapse
Have you tried flashing a different version of the root program? I assume it's SuperSU (From Chainfire) ? It still gave me root access on 1.94 I saw that he already updated to version 2.00 by now.
Perhaps try a different version and see what it does.
Thread to Chainfire's SuperSU

BerndM14 said:
Have you tried flashing a different version of the root program? I assume it's SuperSU (From Chainfire) ? It still gave me root access on 1.94 I saw that he already updated to version 2.00 by now.
Perhaps try a different version and see what it does.
Thread to Chainfire's SuperSU
Click to expand...
Click to collapse
I used SuperSU. Should I try Super User?

Just use the normal install method from Google play. Twrp auto Installs the su binary the first time it is booted in to. Then just update super su via play store.

ashyx said:
Just use the normal install method from Google play. Twrp auto Installs the su binary the first time it is booted in to. Then just update super su via play store.
Click to expand...
Click to collapse
What is the install method via google play? I've only ever flashed a zip file.

ILowry282 said:
What is the install method via google play? I've only ever flashed a zip file.
Click to expand...
Click to collapse
Once booted into the os you should see the super su app. Go to play store and update it.

[Q] SuperSU/Root Problems

I'm not exactly new to the rooting scene nut lets just say i'm not that expert at it.
THe problem im now getting is on my Samsung Galaxy Note 2(Sgh-1317m) i had it rooted when i was on DN3 but then i wished to update
to 4.4.2, my root was gone. When I tried to re-root it via CF-Auto Root it flashes successfully no probs. But when i open SuperSU it says no SU binary installed and im not able to access root. Is there any way to get root successfully on 4.4.2 or do i have to get back to DN3.
Get back to me ASAP. :good:
Regards,
xtrmewhacker
Special Thanks To Chainfire who made rooting so damn easy!

Try reloading SuperSU from play store
xtrmewhacker said:
. . . When I tried to re-root it via CF-Auto Root it flashes successfully no probs. But when i open SuperSU it says no SU binary installed and im not able to access root. Is there any way to get root successfully on 4.4.2 or do i have to get back to DN3.
Click to expand...
Click to collapse
This is my first post to XDA. I'm brand new to rooting though reasonably competent technically. Wanted to root for access to root-only apps, but wanted to wait for 4.4 in case I ended up unable to receive future updates. 4.4.2 OTA came in yesterday so I tried flashing. Used Odin to install TWRP recovery then used TWRP to load TeamEpic Root From Recovery. When done, root apps said I was not rooted. Loaded SuperSU and it said SU binary was missing and I should reroot. Found CF-Autoroot and loaded it through ODIN. Red-logo thing appeared and system recovered but apps still said no root. Loaded "Root Checker Basic" from play store and it confirmed still no root. Tried to run SuperSU but found it to be missing. Reloaded SuperSU from Play Store. As SuperSU was finishing installing, popup message said something about Root Checker wanting access. I said "grant" and then found that Boot Checker verified root access. So I'm on my way.:victory:
Suggestion to xtrmewhacker: remove SuperSU and reinstall from Play Store.

SuperSU couldn't install the latest binary? I did the same as you, install 4.4 stock, flash cf-auto root, installed supersu from play store.
Supersu then installed via normal (not twrp), disabled knox, and rebooted. Everything was fine after.

dwightarthur said:
This is my first post to XDA. I'm brand new to rooting though reasonably competent technically. Wanted to root for access to root-only apps, but wanted to wait for 4.4 in case I ended up unable to receive future updates. 4.4.2 OTA came in yesterday so I tried flashing. Used Odin to install TWRP recovery then used TWRP to load TeamEpic Root From Recovery. When done, root apps said I was not rooted. Loaded SuperSU and it said SU binary was missing and I should reroot. Found CF-Autoroot and loaded it through ODIN. Red-logo thing appeared and system recovered but apps still said no root. Loaded "Root Checker Basic" from play store and it confirmed still no root. Tried to run SuperSU but found it to be missing. Reloaded SuperSU from Play Store. As SuperSU was finishing installing, popup message said something about Root Checker wanting access. I said "grant" and then found that Boot Checker verified root access. So I'm on my way.:victory:
Suggestion to xtrmewhacker: remove SuperSU and reinstall from Play Store.
Click to expand...
Click to collapse
Thm man appreciate it...I'm rolling now.:good:
This crying moose for confirmation

I'm having an issue on 4.4 where supersu just keeps crashing and I can't even open it. I've tried everything. At one point it opened and started to work but after I reset my phone its back to saying "unfortunately, supersu has stopped working"
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

No progress yet
I managed to flash custom recovery through which i flashed DN3 so im at DN3 but still no root.
i use cf auto and now SuperSU keeps shutting down I keep getting the msg
"Unfortunately,SuperSU has stopped working".
Help plz.
Regards,
xtrmewhacker

I got the same thing with cf-autoroot. I went in to philz touch and applied root there. Reboot and you should be able to dl from the market or do like I did and flash the zip version.
Sent from my Note 3...making all others drool!

m8 shows no root after update

after updating my m8 to lollipop, the device says unroot. software status is still unlocked, I went through the rooting process again,flashed twrp recovery. but cant install anything aa it says device is not rooted.

kalim_714 said:
after updating my m8 to lollipop, the device says unroot. software status is still unlocked, I went through the rooting process again,flashed twrp recovery. but cant install anything aa it says device is not rooted.
Click to expand...
Click to collapse
Hi there,
i have the same Problem.
after ota to 5.01 i rooted my m8 with toolkit , everything goes fine (also perm root and install superSu).
But after restart and automatical apps updates, the supersu app says that su files is missing and there ist no root anymore.
How can i solve that rpoblem? thanks alot
John

John-Wu said:
Hi there,
i have the same Problem.
after ota to 5.01 i rooted my m8 with toolkit , everything goes fine (also perm root and install superSu).
But after restart and automatical apps updates, the supersu app says that su files is missing and there ist no root anymore.
How can i solve that rpoblem? thanks alot
John
Click to expand...
Click to collapse
I've never used a toolkit on my HTC devices, so I can't speak to their effectiveness. Perhaps they need an update to work with Lollipop.
I recommend using TWRP recovery (just because it's the one I used and I know it worked for me. Can't speak to CWM or Philz)
Flash the SuperSU update zip found here: http://download.chainfire.eu/695/SuperSU/

craig0r said:
I've never used a toolkit on my HTC devices, so I can't speak to their effectiveness. Perhaps they need an update to work with Lollipop.
I recommend using TWRP recovery (just because it's the one I used and I know it worked for me. Can't speak to CWM or Philz)
Flash the SuperSU update zip found here: http://download.chainfire.eu/695/SuperSU/
Click to expand...
Click to collapse
hi,
thanks alot. that's it!!
with toolkit i've already installed TWRP and with the updated SuperSu (your link) i've root again.
once again, thanks!

Lost Root Privilege and recovery set to default.

Good morning...
I've had my S6 with 6.0.1 "CDP2" "rooted and with twrp 3 for about one week.
However late last nite I noticed I lost root. "There is no SU binary installed and Supersu cannot install it".
Recovery was updated and default was installed..
I tried to root again, successfully "stated by ODIN" re-boots and goes through the phase as establishing TWRP, then default recovery is re-installed...
Any ideas ?
Thanks..

I have run into the exact same issue. Lost root with latest security update yesterday and can't seem to get it back

I was able to regain root. My mistake was trying to flash an older SuperSU. When I flashed the 2.71 version everything went fine. I did loose root after the OTA just needed to flash the right SuperSU to regain it.
Sent from my SM-G920P using XDA-Developers mobile app

I also need to flash new Super SU. But my recovery is not TWRP. It's Android recovery and has 3 options for Install update : Through ADB, External storage or Cashe. Which option to choose?

IronMaidenBG said:
I also need to flash new Super SU. But my recovery is not TWRP. It's Android recovery and has 3 options for Install update : Through ADB, External storage or Cashe. Which option to choose?
Click to expand...
Click to collapse
Flash the latest CF-Auto root, then flash TWRP. CF-AUTO root will knock out the kernels protections and allow you to flash TWRP.

kbless60 said:
I was able to regain root. My mistake was trying to flash an older SuperSU. When I flashed the 2.71 version everything went fine. I did loose root after the OTA just needed to flash the right SuperSU to regain it.
Sent from my SM-G920P using XDA-Developers mobile app
Click to expand...
Click to collapse
Same thing happened to me. I had an OTA security update, lost root, but reflashed 2.71 SuperSu using TWRP to regain root.

Tutorial Available
There is a tutorial, including links, available here: http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Specific instructions for rooting after PD3 are here: http://forum.xda-developers.com/showpost.php?p=66978384&postcount=41