Flickered/Glitch on my screen after last update (Asus_Z00AD WW_2020.40.184_20160504) - ZenFone 2 Q&A, Help & Troubleshooting

Hi guys please help, i can't do it anything. i tried with Disable HW overlays but is not working.
I tried with wipe cache partition from Recovery Mode, but i cant see the screen in the best way (vertical bands, discoloration)
In my country Asus dont have a Technical services (just for notebook/PC)
:crying:
PD: Sorry for my engrish, is not my native language

If its flicking like halogen lamp its normal.

Not sure u have this problem. Maybe hardware or software.
If software, try downloading the full 184 firmware and flash in twrp again. The flash supersu, and whatever etc. See if its the same.
If not, try factory reset.
Still cannot, then hardware

Tiongkia said:
Not sure u have this problem. Maybe hardware or software.
If software, try downloading the full 184 firmware and flash in twrp again. The flash supersu, and whatever etc. See if its the same.
If not, try factory reset.
Still cannot, then hardware
Click to expand...
Click to collapse
Can you link me how to flash in "TWRP" ?
ty man
cheers-

noisebrain said:
Can you link me how to flash in "TWRP" ?
ty man
cheers-
Click to expand...
Click to collapse
Everything is in this forum buddy. Try searching. Its very obvious. I am overseas now. Using phone to reply u.

Tiongkia said:
Everything is in this forum buddy. Try searching. Its very obvious. I am overseas now. Using phone to reply u.
Click to expand...
Click to collapse
Yes i found it, its very difficult couse I Didn't See a ****

Related

[SOLVED] Installation Problem

Hi folks,
I did rooted my arc 3 months back and i can still access my super user, yesterday i installed cwm for xperia phones successfully.
I tried to flash 4.0.4_Xperia-S_deodexed-V2.5beats using CWM(previous version stock 2.3.5). I did cleared the cache and all the stuff, but now i cannot boot to OS or CWM or anything, literally i can't use my phone.
It just shows up screen with Sony Ericsson Logo goes no where.
Please help me guys I want to install any custom ROM on my phone please suggest me
Thank you so much guys.
You have probably wiped data too which is a factory reset. Run your back up or reflash.
XperienceD said:
You have probably wiped data too which is a factory reset. Run your back up or reflash.
Click to expand...
Click to collapse
Thank you my friend, are there any guides to reflash, will it surely works if i reflash.
forgive me if i am asking too many questions.
badriinvenkat said:
Thank you my friend, are there any guides to reflash
Click to expand...
Click to collapse
Plenty, see the stickys in the general section.
XperienceD said:
Plenty, see the stickys in the general section.
Click to expand...
Click to collapse
i reflashed an old version 2.3.4 and every thing is working fine, got an OTA update on phone and downloaded the update using wifi and it turned off as the part of update process, thats it and never turned on :crying::crying::crying:
i tried again to flash the same version but never worked!!! what can i do now
Flash THIS with the flastool and report back.
i tried that just now and it does the same result, after flashing the .ftf file it says to take the cable off and turn it on. It never turns on but when i press the power button it blinks the green LED (donno what it does mean!!)
any ways thanks for your suggestion.
Try THIS instead, if that doesn't work then not sure.
XperienceD said:
Try THIS instead, if that doesn't work then not sure.
Click to expand...
Click to collapse
Thank yo so much my friend you really helped me a lot, sorry for keep asking you(I mean i should have searched everywhere before asking you)
My phone is working back :victory::victory::victory::victory::victory:
badriinvenkat said:
Thank yo so much my friend you really helped me a lot, sorry for keep asking you(I mean i should have searched everywhere before asking you)
My phone is working back :victory::victory::victory::victory::victory:
Click to expand...
Click to collapse
Excellent. Sometimes we just can't see the wood for the trees, myself included.

Maguro too many problems please help

Hi guys, yesterday i flashed a stock image for my galaxy nexus maguro, because i had 1 problem..
But the problem is still here, and now i have another one..
The 1st problem : When i call somebody or i receive a call, the earphone (or however it is called) doesn't work, the mic not work too, but this happes the most time, and sometimes it works well...
[The 2nd problem : My camera app seems to take pictures, but there is nothing in the gallery... it don't even save the photo in the memory..] <---- SOLVED BY WIPING THE INTERNAL STORAGE !!
For both problems, they happen on any rom...
Actually i'm on Vanir Rom..
Please guys help me :/
follow the return to stock guide in my signature. do not skip any steps.
Zepius said:
follow the return to stock guide in my signature. do not skip any steps.
Click to expand...
Click to collapse
I solved my 2nd problem by my self, i don't know why, but my internal storage was locked, i was't able toi write anything on it.. i just wiped it throught the twrp recovery, but still the 1st problem is still here... and it's really anyoning.. :/
martinko23 said:
I solved my 2nd problem by my self, i don't know why, but my internal storage was locked, i was't able toi write anything on it.. i just wiped it throught the twrp recovery, but still the 1st problem is still here... and it's really anyoning.. :/
Click to expand...
Click to collapse
might be a hardware issue; still, have you tried flashing another baseband, just to see if it changes anything? and please, don't ask me on how to flash a baseband, plenty of guides around here (hint: stickies, general and q&a forums)
beekay201 said:
might be a hardware issue; still, have you tried flashing another baseband, just to see if it changes anything? and please, don't ask me on how to flash a baseband, plenty of guides around here (hint: stickies, general and q&a forums)
Click to expand...
Click to collapse
I'll look at that thanks...
But how it can be a hardware issue ? Sometimes it work all fine, sometime not...
martinko23 said:
I'll look at that thanks...
But how it can be a hardware issue ? Sometimes it work all fine, sometime not...
Click to expand...
Click to collapse
iminent hw failure?
beekay201 said:
iminent hw failure?
Click to expand...
Click to collapse
oh :/ You think it can be fixed somehow ?
martinko23 said:
oh :/ You think it can be fixed somehow ?
Click to expand...
Click to collapse
replacing the damaged hw component? maybe the ifixit guys have a tear down.
beekay201 said:
replacing the damaged hw component? maybe the ifixit guys have a tear down.
Click to expand...
Click to collapse
Okay thx, i'll take a look at it, but now i'm going to try the baseband thing.

FlashLED is Dead!

I don't know how it died but not working at all. I try flash ftf, open service menu and testing FlashLED. Not responding :crying: Also try Cm11 and Torch app, again not responding. Probably dead and my phone going to service. So sad
try to format?
bassgitt said:
I don't know how it died but not working at all. I try flash ftf, open service menu and testing FlashLED. Not responding :crying: Also try Cm11 and Torch app, again not responding. Probably dead and my phone going to service. So sad
Click to expand...
Click to collapse
have you ever wipe data or something bad happen to your phone? just try to format before, but i think have you flash the ftf. file with the right type for your phone or your region? because i have same problem like you but i'm not in flash LED, i in the processor sometime my processor it's don't work correctly. So i flash with my region ftf file and i do wipe data. and that's all i think
Nicklas Van Dam said:
have you ever wipe data or something bad happen to your phone? just try to format before, but i think have you flash the ftf. file with the right type for your phone or your region? because i have same problem like you but i'm not in flash LED, i in the processor sometime my processor it's don't work correctly. So i flash with my region ftf file and i do wipe data. and that's all i think
Click to expand...
Click to collapse
yes i try to flash my region ftf and cm11.Need to go service So bad
bassgitt said:
yes i try to flash my region ftf and cm11.Need to go service So bad
Click to expand...
Click to collapse
ya i hope can work, but if still dead. i don't know may be the way it's only service to service center.
Nicklas Van Dam said:
ya i hope can work, but if still dead. i don't know may be the way it's only service to service center.
Click to expand...
Click to collapse
Wow Happy news, i try all ways for working led but nothing.Just flashed my region ftf and flashled back so happy just wow :laugh::good:
great work!!!
bassgitt said:
Wow Happy news, i try all ways for working led but nothing.Just flashed my region ftf and flashled back so happy just wow :laugh::good:
Click to expand...
Click to collapse
good job, you do it:good:. and happy for your hard work ya!!!

Zenphone2 Screeen freeze

Screeen freezes but also sometimes works after several reboots any thoughts
Thank you
details? rooted? xposed installed? what u did and the freeze happened? (e.g. install some app or flash something).
Tiongkia said:
details? rooted? xposed installed? what u did and the freeze happened? (e.g. install some app or flash something).
Click to expand...
Click to collapse
It is stock phone I did not do anything to it
i have done a factory reset did not help works a bit then stops
it has the latest upadates and done by the phone it self
If that's the case (no root, u did nothing and even factory reset), suggest u monitor awhile more. If really remains the same, go to service center.
Cannot help much. sorry
Tiongkia said:
If that's the case (no root, u did nothing and even factory reset), suggest u monitor awhile more. If really remains the same, go to service center.
Cannot help much. sorry
Click to expand...
Click to collapse
ok thank you

****ed up my P8000

Hello XDA, this is my first post, this comunity is awesome and helped me a lot for a couple of years now.
there always seems to be a solution to everything!
but now i realy ****ed up. i accidentaly checked the wrong thing on the so called "smart phone flash tool"
i klicked firmware upgrade instead of download only.
is there any way so rescue my phone? thank you very much in advance! :crying:
here is a screenshot: (i cant paste link because i am new):crying:
I'd better let someone more qualified answer your query but I'm pretty sure your situation can be recovered easily. What happens if you try to reflash the firmware again with the correct settings? These phones are pretty hard to brick!
charliepie said:
I'd better let someone more qualified answer your query but I'm pretty sure your situation can be recovered easily. What happens if you try to reflash the firmware again with the correct settings? These phones are pretty hard to brick!
Click to expand...
Click to collapse
there probably is SOME way to fix it, i am sure, but the phone does not even boot into recovery.
Mediatek phones are hard to brick, haha
It is PROBABLY going to give a headache in order to find the needed files, flash the stuff again and etc using the proper way, but PROBABLY your phone will relive again. Try rooting and installing Eragon after a full wipe, if that option is available.
You may look here:
Bricked P8000
This may help.
I was in the same state when I accidentally flashed a the wrong logo.img file. I fixed it by doing a format on flashtool>stock rom>custom recovery>custom rom again!
abubakar486 said:
I was in the same state when I accidentally flashed a the wrong logo.img file. I fixed it by doing a format on flashtool>stock rom>custom recovery>custom rom again!
Click to expand...
Click to collapse
hi, thank you; but my phone does not even boot. it gets recognized by the pc though
New problem
OKAY now i got everything working so far. but there is a new real big problem. it has some kind of imei error so it doesnt let me use data on the way
how can this be fixed? i mean, i have the correct imei s right here whith me.
thank you in advance.
Data is turned on under data usage in settings menu and the APN is correct? What does the error message say and can you make calls/SMS OK?
FIXED
charliepie said:
Data is turned on under data usage in settings menu and the APN is correct? What does the error message say and can you make calls/SMS OK?
Click to expand...
Click to collapse
Hey! i fixed it. again fith XDAs help
http://forum.xda-developers.com/canvas-a1/general/fix-imei-perfect-fix-android-imei-t2943567
solution 2 worked for me.
Also i have a new problem. when connecting my bluetooth speaker it says...well maybe this belongs to another forum :good:

Categories

Resources