Related
I am trying to install the original firmware and have not succeeded using
1.LGNPST (bin & dll: E971.E973.E975.F180_Original_TeenyBin-AA.bin file and LGNPST_LS970.dll)
or
2. LGs support tool (kdz: E97510D_00.kdz)
Problems with 1.:
No response when typing my IMEI and SN. Previously I used Teenybin and might have used the wrong .dll and .bin files - could that bethe reason?
Problem with 2.:
Log:
[R&D Test Tools Log File]
07:24:49 : Launching SW update
07:24:49 : Unpacking KDZ
07:25:29 : KDZ file extraced
07:26:04 : Files were extracted.
07:26:04 : LGMobileDL Load.
07:26:04 : Port = -1
07:26:04 : Connecting to phone
07:26:16 : Check Phone mode = 2
07:26:16 : Phone type check.......
07:26:17 : LGMobileDL.DLL Loading....
07:26:17 : _SetAuthMark Fail
07:26:17 : _SetAuthMark Ok : wAuthMark(65535)
07:26:17 : _DetachDLL Call
07:26:17 : _DetachDLL Call End
07:26:17 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510D_00.dz
07:26:17 : Param : moduleDir =
07:26:17 : Param : waitTime = 0
07:26:17 : Param : UsbHighSpeed = 1
07:26:17 : Param : PhoneMode = 2
07:26:17 : Param : BinVersion = E97510D_00
07:26:17 : Param : AuthMark = 65535
07:26:17 : Call fn_StartUpgrade
07:29:12 : 3GQCT : wParam = 100, lParam = 210
07:29:12 : Step : Upgrade Error error code = 210
07:29:12 : ResetStartInfo() Call
07:29:12 : _DetachDLL Call
07:29:13 : _DetachDLL Call End
07:29:13 : FreeLibrary Call
07:29:13 : FreeLibrary Call End
07:29:13 : ResetStartInfo() Call End
07:29:14 : ===FINISHED===
It ends with a pop-up UPGRADE ERROR:
WParam : 100
LParam : 210
Other aspects:
1. If I only let my phone charge, I get a green screen, that indicates 3 ways to move on: Fastboot, Recovery and Download mode, if I press the specific buttons. But if I try to, it doesn´t work.
2. I have also been able to enter TWRP, but cant mount to find a rom to install. It only want to update the partition.
3. My phone is only able to connect to the laptop in Download mode.
I admit I´m a noob, but really think I have been trying to read and do stuff people have suggested.
I need to start a fresh, so if you have any suggestions to what to do, please help me - its already been 4 days now
Thanks!
LGNPST is NOT for E975.I managed to softbrick my phone with it .kdz downloader it's ok.
Do you have written the IMEI?
use KDZ downloader to get proper kdz directly for your phone. I'll attach bellow.
I suggest you charge the phone to full, download KDZ, then flash it with kdz updater in cs_emergency.
LGNPST works with E975. all files are available at team codefire
kimitza said:
LGNPST is NOT for E975.I managed to softbrick my phone with it .kdz downloader it's ok.
Do you have written the IMEI?
use KDZ downloader to get proper kdz directly for your phone. I'll attach bellow.
I suggest you charge the phone to full, download KDZ, then flash it with kdz updater in cs_emergency.
Click to expand...
Click to collapse
Thsank you so much. I have now downloadet the file, installed .NET and installed the KDZ Downloader, but when I type the IMEI, it says: Sorry, this serial number is not valid!!!??
skdubg said:
LGNPST works with E975. all files are available at team codefire
Click to expand...
Click to collapse
Thanks, but is this working for my European Optimus G?
And do you have a link, pls? Thank you!!
kimitza said:
LGNPST is NOT for E975.I managed to softbrick my phone with it .kdz downloader it's ok.
Do you have written the IMEI?
use KDZ downloader to get proper kdz directly for your phone. I'll attach bellow.
I suggest you charge the phone to full, download KDZ, then flash it with kdz updater in cs_emergency.
Click to expand...
Click to collapse
Now it worked - partly!
I had written the IMEI with the "-"... When I wrote it without, it started to download, the kdz file.
But as I run the KDZ Updater, I get this ERROR:
19:14:00 : Launching SW update
19:14:00 : Unpacking KDZ
19:14:13 : KDZ file extraced
19:14:14 : Extract file error
19:14:16 : ===FINISHED===
Any suggestions?
Thanks!
http://forum.xda-developers.com/showthread.php?p=41556185#post41556185
This guy here had the same problem,but he solved it .
Try what done .
Use recovery option from Lg support tool.... I also faced the same error once i unlocked the bootloader... Cant able to flash using kdz... Luckily i restored the backup in freegee nd locked the bootloader... Aftr that everything goes fyn... :thumbup:... If yu ve orig backup then restor it nd try kdz flash.... If that doesn't help recovery tool s the ly option...
Sent from my LG-E975 using xda premium
skdubg said:
LGNPST works with E975. all files are available at team codefire
Click to expand...
Click to collapse
But do these files work for the European version as well?
there is only one E975 for all over the world
a "european" version doesnt exist
skdubg said:
there is only one E975 for all over the world
a "european" version doesnt exist
Click to expand...
Click to collapse
thx, I was confused by the dll file I use it´s named LGNPST_LS970.dll but I suppose that will work...?
and then I use Teenybins bin file, which should work for various models...
The real problem now is that I am able to get into Recovery mode but can´t flash any of the two roms I pushed to the phone?
the dll for lgnpst for the E975 can you find here:
http://downloads.codefi.re/shelnutt2/optimusg/e975
but ls970 should work too
skdubg said:
the dll for lgnpst for the E975 can you find here:
http://downloads.codefi.re/shelnutt2/optimusg/e975
but ls970 should work too
Click to expand...
Click to collapse
thx, well, apparantly it doesn´t. I am able to install unti 85% and then I power off and the on and it reaches 100%.
And the I press the Finished (or something) button, but I can´t start it up again... I can only go into download mode (or sometimes TWRP).
I don´t see the LG logo at anytime but only the Google and the open lock?
Any other suggestions?
I know E975 came with JB, but you could try to flash the bootloader again. If this still doesn't work,you have 2 options my friend:
1. hardbrick it and send it to warranty.Tell them the phone just died
2.go to a service to jtag it. but this will void your warranty, since they must open the phone.
kimitza said:
I know E975 came with JB, but you could try to flash the bootloader again. If this still doesn't work,you have 2 options my friend:
1. hardbrick it and send it to warranty.Tell them the phone just died
2.go to a service to jtag it. but this will void your warranty, since they must open the phone.
Click to expand...
Click to collapse
oooh, pls dont say that! I already send it to warranty, but I hadn´t hardbricked it so they said it was out of warrenty cause unauthorized software had been installed... will be difficult to send it back now hardbricked!
been on it for weeks, and even though I am just a noob, I have done so much even though I am not a nerd, used kdz downloader and updater and the LGNPST tool, making sure to get the right bin and dll files, LG TOols, , gotten familiar with command prompts, adb sideload irc etc.
but what is jtag???
I just want to feel the victory in finding a solution!!!
BIG SIGH...
JTAG is an interface which allows you to write/rewrite bootloader/software on a device.Unfortunatelly, it's quite expensive keep it home(about 300euros with accesories) so only services have them.Just look around your area and look for a service with JTAG. It will cost you 10-20 euros,but i guess it's better than no working phone .
http://www.youtube.com/watch?v=5NRXhJxbtYY
Here is the proof G can be JTAGed.
kimitza said:
JTAG is an interface which allows you to write/rewrite bootloader/software on a device.Unfortunatelly, it's quite expensive keep it home(about 300euros with accesories) so only services have them.Just look around your area and look for a service with JTAG. It will cost you 10-20 euros,but i guess it's better than no working phone .
http://www.youtube.com/watch?v=5NRXhJxbtYY
Here is the proof G can be JTAGed.
Click to expand...
Click to collapse
thanks man...
difficiult to find here in Copenhagen, but will be going to London next week, hope to do it over there...
I only thought mine was softbricked?? I mean I can still go into download mode - isn´t that an indication of that??
True,if you can get into download mode you can restore it home. But, for some reasons, you are not able to do that.I'm sure if i would've got my hands on your phone i would fix it .
Maybe it's something you are not doing right, something not big, but it's messing up the procedure.
adam4real said:
thanks man...
difficiult to find here in Copenhagen, but will be going to London next week, hope to do it over there...
I only thought mine was softbricked?? I mean I can still go into download mode - isn´t that an indication of that??
Click to expand...
Click to collapse
Btw im havin a quest that how yu got the google logo..!!...Juz explain clearly wat ve yu done earlier which made yu to worry now...??....tat may lead us to give some soln...
hasan4791 said:
Btw im havin a quest that how yu got the google logo..!!...Juz explain clearly wat ve yu done earlier which made yu to worry now...??....tat may lead us to give some soln...
Click to expand...
Click to collapse
lots of happiness here... I just have just downloadet another (and not corrupt?) version of LGs firmware and installed it succesfully!!
Not sure if am unlocked and rooted now, but I hardly dare to find out
Thank you so much for your help!
Phone facts:
LG-F180, S/N: 0066451ae1d458e3
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
3) Now I turned to “[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]” using LGNPST and TeenyBin. Finally something happened – I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ‘assert’ line in the script, or
b. Changing the element to what the phone reports did not help
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I am so confused about somethings that are:
In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180 and after searching goole, i find that MAKO is a Nexus 4. So What ROM i have to download and from where?
Is TeenyBin and LGPNST creates problem? If yes, what to do?
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet. Many people have same problem stated but no solution is given to them..
I will be so thankful to all of you as this forum is my only hope.
My email is [email protected].
What caused the softbrick of your phone?
davevinci said:
What caused the softbrick of your phone?
Click to expand...
Click to collapse
Actually,its my mistake. I root the phone and uninstall google play movie, play tv. Because the Wi-Fi is on, my phone tells me that that software update is available. I click on it. After update download, phone restarts and loops in LG LOGO and did not go further. Then i do all things i mentioned in my thread.
Your phone is f180l but unlockbootloaderalready.so it's turn to marko. My phone is f180l too, but after unlock bootloader, its turn to e975.
1. Can you boot to recovery now. If can,its simple to flash a new rom. After flash, plz wipe data/cache/davik cache ( i usually do so, prevent a bootloop happend)
2. If you had status 7 error,open (just open)the rom, go to meta-if/android/google update-scrip. Drop and drag to a folder. Open it with note++ and delete the line ro.build.e975..
Osave it.overwrite the update-script in romzip.then flash it again.
Do 3 wipe after flash.
Sorry for my bad english.
kembacha said:
Your phone is f180l but unlockbootloaderalready.so it's turn to marko. My phone is f180l too, but after unlock bootloader, its turn to e975.
1. Can you boot to recovery now. If can,its simple to flash a new rom. After flash, plz wipe data/cache/davik cache ( i usually do so, prevent a bootloop happend)
2. If you had status 7 error,open (just open)the rom, go to meta-if/android/google update-scrip. Drop and drag to a folder. Open it with note++ and delete the line ro.build.e975..
Osave it.overwrite the update-script in romzip.then flash it again.
Do 3 wipe after flash.
Sorry for my bad english.
Click to expand...
Click to collapse
i have a proble now,when i flash a new rom through LG flash tool, it gives me an error.Below is the log:
Extract Start C:\Users\Mansoor\Desktop\F180L20S_00.kdz*****
00:34:37 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:34:37 : File Size = 1259052458
00:35:39 : Extract kdz file Success.
00:35:39 : ExtractInfo Error(0)
00:35:39 : Extract cab file error.
00:35:39 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:35:39 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:35:39 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:35:39 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
00:35:39 : CLGMobileHttp Class ¼Ò¸ê...
00:35:39 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:35:39 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Can u tell me why this error comes?
You are flashing a kdz larger than 1 GB
Sent from my LG-E975 using Tapatalk
atifsh said:
You are flashing a kdz larger than 1 GB
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Nice to see someone from pakistan. I am from rawalpindi.
Because the file is larger,i am using LG Flash Tool, not KDZ updater. Every stock ROM for F180L is greater than 1GB.My phone is soft bricked. I do all the procedure mentioned in my thread above. Kindly read it and give me advice.
mansoor3131 said:
Nice to see someone from pakistan. I am from rawalpindi.
Because the file is larger,i am using LG Flash Tool, not KDZ updater. Every stock ROM for F180L is greater than 1GB.My phone is soft bricked. I do all the procedure mentioned in my thread above. Kindly read it and give me advice.
Click to expand...
Click to collapse
No not all files 20f is not or something, ill give you link later on road now.
Sent from my GT-P3100 using Tapatalk HD
mansoor3131 said:
i have a proble now,when i flash a new rom through LG flash tool, it gives me an error.Below is the log:
Extract Start C:\Users\Mansoor\Desktop\F180L20S_00.kdz*****
00:34:37 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:34:37 : File Size = 1259052458
00:35:39 : Extract kdz file Success.
00:35:39 : ExtractInfo Error(0)
00:35:39 : Extract cab file error.
00:35:39 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:35:39 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:35:39 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:35:39 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
00:35:39 : CLGMobileHttp Class ¼Ò¸ê...
00:35:39 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:35:39 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Can u tell me why this error comes?
Click to expand...
Click to collapse
I think that your kdz file has some error. Try to download it again.
It often happen when recomplie the file by using idm download.
If you can boot to recovery(cwm) mode, i'll send you a link, that you can download and flash it. Sure that it will no bootloop again
Sent from my LG-F180 using Tapatalk
kembacha said:
I think that your kdz file has some error. Try to download it again.
It often happen when recomplie the file by using idm download.
If you can boot to recovery(cwm) mode, i'll send you a link, that you can download and flash it. Sure that it will no bootloop again
Sent from my LG-F180 using Tapatalk
Click to expand...
Click to collapse
Ok. I can boot in to recovery mode but that is not CWM. That is Team Win Recovery Project (TWRP). I can flash from there. Kindly read my thread also. It gives you complete picture.
http://forum.xda-developers.com/showthread.php?p=46660097
mansoor3131 said:
Ok. I can boot in to recovery mode but that is not CWM. That is Team Win Recovery Project (TWRP). I can flash from there. Kindly read my thread also. It gives you complete picture.
Click to expand...
Click to collapse
Yes, now i understand that. Your phone is about to convert to nexus 4 totally.
i suggest that you must have read the topic "how to convert Optimus G into Nexus 4". There is the way to comeback LG OG. But just for ATT phone E970, not your.
So, must read this "[TOOL] LG-P970 ROM COVERTER Automatic converter from KDZ to BIN/FLS + ROOT". Plz do google search, i cant post the link 'cause im new in this forum. "forum.xda-developers.com/showthread.php?t=1692191"
After you do the convert F180L.KDZ file, you have F180L.bin and F180L.fls. Replace what E970.bin by F180L.bin. It should work. And your phone will comeback to F180L.
I used to do it when i convert Lg Optimus Black KU5900 to P970.
(When there is no hope, try to flash this "docs.google.com/file/d/0B_vbZPzZZhv1Szk2R2ZCTGhxY2s/edit?usp=sharing" ( copy and paste in your browser) , this exactly kdz file (in zip file form, install through Custom Recovery, i think TWRP is ok too). I always use this when i want to come back to stock rom from AOKP, CM, ..., don't need to use flashtool, kdz firmware update- for sure).
kembacha said:
Yes, now i understand that. Your phone is about to convert to nexus 4 totally.
i suggest that you must have read the topic "how to convert Optimus G into Nexus 4". There is the way to comeback LG OG. But just for ATT phone E970, not your.
So, must read this "[TOOL] LG-P970 ROM COVERTER Automatic converter from KDZ to BIN/FLS + ROOT". Plz do google search, i cant post the link 'cause im new in this forum. "forum.xda-developers.com/showthread.php?t=1692191"
After you do the convert F180L.KDZ file, you have F180L.bin and F180L.fls. Replace what E970.bin by F180L.bin. It should work. And your phone will comeback to F180L.
I used to do it when i convert Lg Optimus Black KU5900 to P970.
(When there is no hope, try to flash this "docs.google.com/file/d/0B_vbZPzZZhv1Szk2R2ZCTGhxY2s/edit?usp=sharing" ( copy and paste in your browser) , this exactly kdz file (in zip file form, install through Custom Recovery, i think TWRP is ok too). I always use this when i want to come back to stock rom from AOKP, CM, ..., don't need to use flashtool, kdz firmware update- for sure).
Click to expand...
Click to collapse
kembacha, how can i thanks to you as you reply me when i am nearly hopeless because no one is replying me at any forum. Thank you so much for atleast you give me something that i can do to recover my phone. Just one concern that E970.dll file is used.Did i need F180.dll file or E970.dll file is ok?
You can mail me the links. Below is my mail address:
[email protected]
Again Thank you very much.
mansoor3131 said:
kembacha, how can i thanks to you as you reply me when i am nearly hopeless because no one is replying me at any forum. Thank you so much for atleast you give me something that i can do to recover my phone. Just one concern that E970.dll file is used.Did i need F180.dll file or E970.dll file is ok?
You can mail me the links. Below is my mail address:
[email protected]
Again Thank you very much.
Click to expand...
Click to collapse
Must say sorry that im not sure 100%. But i think you should use F180.dll.
I have read the topic about " how to convert optimus g to nexus 4". But it just for e970. And f180 or e975 is different. E970 is 16gb. 8mpx and have ex-sdcard. And optimus g f180l. E975 dont have.
P.s: just copy my link and paste into your browser. I'll can post a link soon. After 10 post
Sent from my LG-F220K using Tapatalk
kembacha said:
Must say sorry that im not sure 100%. But i think you should use F180.dll.
I have read the topic about " how to convert optimus g to nexus 4". But it just for e970. And f180 or e975 is different. E970 is 16gb. 8mpx and have ex-sdcard. And optimus g f180l. E975 dont have.
P.s: just copy my link and paste into your browser. I'll can post a link soon. After 10 post
Sent from my LG-F220K using Tapatalk
Click to expand...
Click to collapse
The ROM converter is for P970 and P920 only. It cannot convert the Optimus G KDZ files.Now what do u suggest?
mansoor3131 said:
The ROM converter is for P970 and P920 only. It cannot convert the Optimus G KDZ files.Now what do u suggest?
Click to expand...
Click to collapse
Now here is the link to make a file system.img from kdz file. But there are way to have .dll file
http://www.tinhte.vn/threads/lay-file-system-img-tu-rom-goc-kdz-cho-cac-dong-lg.1886297/
You can use google translate. Now i enter this forum by phone. So it hard to introduce you by english.
Now here is google translate:
To create rom cook to get the original rom system.img file for editing . LG KDZ rom format
So moving from rom.kdz to system.img through the following stages :
KDZ File - > LGExtract to use the file.cab - > used 7z to extract the file.Wdb and .Dll - > LGExtract to use the file.tot - > LGUnpackTool use the system.img file - > use Ext2Explore to extract the components of system.img
A.Tool
Download the package LGUnpack link http://www.mediafire.com/download/3fi4bi54u49drsc/LGUnpack.rar) extract the file :
1 - 7za
2 - Ext2Explore
3 - LGExtract
4 - LGUnpackTool
B. Extract
1.Creat a folder name is LG in drive C : C:\ LG
In the folder are folders LGUnpack LG , in LGUnpack including cmd.exe 4 + + file on Rom.kdz
( cmd thrown in there for convenience , rom.kdz in this example is F200S10c_00.kdz )
2.Extract file. KDZ inorder to have .Cab file- Run Cmd
C : \ LG \ LGUnpack > LGExtract.exe - KDZ Rom.kdz ( order form )
C : \ LG \ LGUnpack > LGExtract.exe - KDZ F200S10c_00.kdz
extracting :
KDZ : F200S10c_00.kdz
Fixed CAB file headers .
File : F200S10c_00.cab
File <S> extracted SUCCESSFULLY !
C : \ LG \ LGUnpack
3.Extract . Cabfile to . Wdb file
3.1.Using Cmd
C : \ LG \ LGUnpack > 7za.exe e -y F200S10c_00.cab
3.2.Or using 7zip to extract the file . Cab
- > 3 Results for the file : . Wdb , and WDH . Dll <<< and this file you need here, i think
Specifically :
F200S_F200S10c_Develop.wdb and F200S_F200S10c_Develop.wdh and G1TDR_60.dll
4.Giai compressed file . Wdb the BIN ( BIN folder with the file . Tot )
C : \ LG \ LGUnpack > LGExtract.exe - wdb F200S_F200S10c_Develop.wdb G1TDR_60.dll
WDB : F200S_F200S10c_Develop.wdb
DLL : G1TDR_60.dll
File : BIN \ F200S_F200S10c.tot
File <S> extracted SUCCESSFULLY !
C : \ LG \ LGUnpack >
- > In the BIN directory with files F200S_F200S10c.tot
5 . Unzip the file . Tot the system.img
LGUnpackTool run ( run as Run as Administrtor )
[ IMG ]
In LGUnpackTool interface :
+ 1 item to select BIN file \ F200S_F200S10c.tot
- Section 2 : select all
- Section 3 : select Unpack
- > Will be several files including files system.img
6.Giai system.img file compression
Running Ext2Explore - > select Open Image File tab - > select the system.img - > select Save ( icon )
It then extract the files in the rom , for example, app , apps , framework , ........
Click to expand...
Click to collapse
Sent from my LG-F220K using Tapatalk
What flashtool are u using?
Sent from my LG-F180K using Tapatalk
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
Have u tried the one in lg g2? Works with 1gb and up.. i use it to flash 1.2 gb with my phone
Sent from my LG-F180K using Tapatalk
I am using E975 philipines rom on F180L and the phone is fine.
Custom recovery is installed and when I go into the recovery it shows.
Product name = Mako
Variant = Mako 32GB.
And I an aware what I was doing so this is not an issue. I guess this is standard when u install recovery using FreeGee and need not to worry.
Now I have another issue which u may help.
Any idea how to flash a kdz file greater than 1 GB. I have an F180L that I have successfully flashed to E975 by flashing the Philipines KDZ less than 1 GB .
However I want to flash the KDZ of UAE or any other KDZ with urdu or arabic support. However those are greater than 1 GB and the extraction of these fails. I have tried using the offline procdure where KDZ updater launches the official tool. However the official tool goes to the webite instead of using the local kdz. Any idea how can I flash the file greater than I GB.
BTW I am from Rawalpindi also
davevinci said:
What flashtool are u using?
Sent from my LG-F180K using Tapatalk
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
Have u tried the one in lg g2? Works with 1gb and up.. i use it to flash 1.2 gb with my phone
Sent from my LG-F180K using Tapatalk
Click to expand...
Click to collapse
Kindly follow my thread and you got all i used and the results.
http://forum.xda-developers.com/showthread.php?t=2492105
[R&D Test Tools Log File]
20:04:42 : Launching SW update
20:04:42 : Unpacking KDZ
20:05:41 : KDZ file extraced
20:05:42 : Extract file error
20:05:44 : ===FINISHED===
i rooted my phone
and i delete system app via root app delete
then i reboot my phone
then bootloader said "security error"
after i updated my phone via lg support tool
and work correctly
after i rooted and remove Korean app
and reboot my phone and said "security error"
then i tried to update via lg support tool
but it said lack of battery power but i fully charged
after i tried kdz updater and it said kdz extract error
i don't know what to do
please help me
1: stop saying you have e975
2: use smaller sized kdz
3: read for any more info
atifsh said:
1: stop saying you have e975
2: use smaller sized kdz
3: read for any more info
Click to expand...
Click to collapse
:laugh: for step 1.
chamaraaa this is xda first make a search then post your thread and you're question already answered many time in q&a section,
i try to fix my phone after install wrong rom Gloudy 2.5 for ((D855)) and my lg g3 is ((D858HK))
now when i use lg flash tool and Dll and TOT :
1.Dll file = LGUP8974.dll
2. TOT file = BIN_LGD857AT-00-V10a-CUO-CN-JUL-30-2014+0.tot
i try many website to donwload TOT file i dont find only this file : BIN_LGD857AT-00-V10a-CUO-CN-JUL-30-2014+0.tot
and when i flash it i see fail
see the photo
https://i.imgsafe.org/b221e96606.jpg
--------------
please someone help me and fix my phone
* i can open download mode .:good:
any hellllp
Hello!
I tried to update my Vodafone Branded G4 with the europe not branded version H81520g_00_0720.kdz
The problem ist i just get "error code = 0x2000, invalid command response" from the LGUP software and everytime i start the phone it is in firmware update mode.
Any idea how to fix this?
Greetings
I got this too as I tried to install H81520o_00_0310.kdz then I thought that it is maybe related to the brand. So I download your kdz file and then it was working.
So I would guess try another number is the best what you can do. I believe it is because of selection of "upgrade". If you have a tot file for refurbish, then maybe another is working, but I didn't do this yet.
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
the_naxhoo said:
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
Click to expand...
Click to collapse
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
kobisa25 said:
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
Click to expand...
Click to collapse
you must extract it from the KDZ with this tool: Click Here
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
hi so i extract the kdz from LGExtract&7za& manuall tool& when i use winrar to extract its tell me no archive found i try also in winzip software. do you have any idea what else 2do?
thank you.
You can also try the codefire dll: http://downloads.codefi.re/autoprime/LG/LG_G4
( Download and rename LGFLASH_LG_G4_CODEFIRE.dll )
sfX
GOT IT!
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
so after a long long search and dosents off error i succeeded
i find the currect kdz ISRAEL one and from it i EXTRACT it with WindowsLGFirmwareExtract-1.2.5.0-Release dll file and downgraded to lollipop 5.5 only with this dll file i make it after i try a few rom stocks that work with the dll.
i want to thank you you direct me to the right way:good:
Hi,
I have LG H811 (T-Mobile) Variant. I receive error from LGUP everytime I try to flash this ROM=h81120x_00_1108.kdz
My LGUP shows COM =COM3 and Version=H81120v
The error is thrown at 9%
Nothing working for me I am very frustrated!!!
PLEASE SOMEBODY HELP ME!
Stuck with LG G4 (H81520i)
Same for me but with LG H81520i. I tried to flash these ROM* with their specific .dll that I extracted thanks to WindowsLGFirmwareExtract-1.2.5.0-Release. Always get "error code = 0x2000, invalid command response" from LGUP. The error is thrown at 16% on the computer, but at 7% on the phone. Now, I'm stuck in download mode. I also tried to change the COM port number, doesn't change anything.
*Europe General H81510B_00.kdz ; Europe OPEN H81510D.kdz ; H81510D_00.kdz ; H81520i_00_0922.kdz ; SEA H81510B.kdz
Only one ROM above matches the LG H81520i (the fourth one).
Informations about my (ex-)android firmware :
- Android version : 6.0 (Marshmallow)
- Kernel version : 3.10.84
- Software version : V20-SEA-XX
PS : H81520i is what is written on the LGUP software
______________________________________________________________________________
I found a solution (after several hours)
Uninstall all your LG softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link and click on "Download all". Extract the file and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" (or your model) et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and close it
12) Do step 9 again (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (the ones in the file that you downloaded or another one you have)
14) Click on "Start" and DON'T TOUCH !!!!!!
Big thanks to the people of this reddit post and of this XDA thread
See above
Back To Stock ROM LG G4 H811 (T-Mobile)
LucasDupanne said:
________________________________________________________
First of all, I'm not allowed to post links as a new user , so I put them with spaces that you must delete :laugh: . Good luck !
Uninstall ALL your softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link ( ht tps : / / ya di . sk /d / KIG5F8 2jmXcUR ) and click on "Download all". After downloading the file, extract it and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and shut it
12) Do again step 8 (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (your one or the ones in the file that you downloaded)
14) Click on "Start" and DON'T TOUCH !!!!!!
==>> thanks to ' ht tps : / / www .reddit . com /r/lgg4/comments/7anayg/downgraded_from_n_to_mm_and_stuck_in_download / ' post
A french man of 15 years that thanks Lobster_Johnson123 very very much.
PS : Sorry, my english is bad And let me know !!! :fingers-crossed:
Click to expand...
Click to collapse
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM: https://lg-roms.com/official-firmware/LG G4-LGH811VK/H811V20r_00_0111/
Thanks for the help though.
androhead said:
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM:
Thanks for the help though.
Click to expand...
Click to collapse
Happy it worked an other way for you !
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Sanaullahshuaib said:
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Click to expand...
Click to collapse
You need H81520p.kdz to downgrade from Nougat!
You can download from here: https://www.4shared.com/file/hfyqh6iEfi/H81520p_00_0314.html
Can also see here if you need more files: https://forum.xda-developers.com/showpost.php?p=76571471&postcount=23
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Sanaullahshuaib said:
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Click to expand...
Click to collapse
After install everything, replace the one in "C:\Program Files (x86)\LG Electronics\LGUP\model\8994" by the given one (or extract from the H81520p.kdz file).
See on the picture how your phone should be detected in "Device Manager":
http://i1376.photobucket.com/albums/ah39/RuedasLocas/Varios/Sem Tiacutetulo_zpsrrscdqov.jpg
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Sanaullahshuaib said:
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Click to expand...
Click to collapse
You first start your phone with any sim or sd card?
Try to flash it again with the v20p and restart it without any card on it.
If it doesn't solve the problem, try a v10a. Maybe it works and you can upgrade starting from there.
Good luck!
now again I tried H815v29A so it installed after the installation of old original version , now please tell the method of rooting Nougat on H815v29A urgently XDA experts???
also Twrp not installing on H815v29A which was working on marshmallow/////
experts reply???