Just got the phone today and successfully rooted it and I wanted to see what this xposed framework stuff was about I installed the experimental version (tbh did really read it was experimental it was on the front page so I thought it was alright) and when prompt to reboot I did, but now when rebooting I can't get passed the Lg secruity error screen I tried re-flashing back to stock using this thread http://forum.xda-developers.com/showthread.php?t=2799647 but nothing happens after I plug my G3 back in it just says ready is there any other way to fix this security error?
edit:found out that my model number is actually the f400s (sorry i'm a phone noob) for anyone else out there trying to find your phone model it's actually behind the battery
Kebito said:
Just got the phone today and successfully rooted it and I wanted to see what this xposed framework stuff was about I installed the experimental version (tbh did really read it was experimental it was on the front page so I thought it was alright) and when prompt to reboot I did, but now when rebooting I can't get passed the Lg secruity error screen I tried re-flashing back to stock using this thread http://forum.xda-developers.com/showthread.php?t=2799647 but nothing happens after I plug my G3 back in it just says ready is there any other way to fix this security error?
edit:found out that my model number is actually the f400s (sorry i'm a phone noob) for anyone else out there trying to find your phone model it's actually behind the battery
Click to expand...
Click to collapse
do you have a picture of the error
suljo94 said:
do you have a picture of the error
Click to expand...
Click to collapse
Again I ended up resolving the issue myself and I do not have a picture of the error but I can describe it. When booting my lg g3 the normal big Lg logo appeared then after a bit a smaller lg logo appeared with the words "security error" under it for those looking for a solution to that problem the thread in the op is the correct action to take to resolve the issue. Note doing that wiped everything on my phone which was not a big deal for me but I had to take my phone back the the carrier to input the configuration to access 4g lte again & it unrooted my phone.
i have this same issue can you tell me how you got around it?
jerimynal wiley said:
i have this same issue can you tell me how you got around it?
Click to expand...
Click to collapse
jerimynal wiley the error you get "secure boot error" is caused by image you are trying to boot not being bumped or not properly flashed. I assume you get this error both while trying to access recovery and OS. If that is the case you should use this guide:
http://forum.xda-developers.com/showthread.php?t=2785089&nocache=1
to flash stock firmware on your device.
But if you have a case where you are able to access your recovery (TWRP I assume) you could use one of the custom images provided here: http://forum.xda-developers.com/lg-g3/development (assuming you have D855 version) . Flash them and use them as OS.
Thanks man. I actually could get into recovery so I just flashed another kernel
Sent from my LG-D850 using XDA Free mobile app
Lg G3 Security Error
Hi everyone.. I have problem with my Lg G3... I rooted my phone and when i make TWRP Reccovery, phone doesnt work.. Its says " LG Seccurity Error" and i can't go into download mode or recovery mode.. And when i connect with USB on my PC, PC cant find this device.. Can anyone help me?
Maryanohr said:
Hi everyone.. I have problem with my Lg G3... I rooted my phone and when i make TWRP Reccovery, phone doesnt work.. Its says " LG Seccurity Error" and i can't go into download mode or recovery mode.. And when i connect with USB on my PC, PC cant find this device.. Can anyone help me?
Click to expand...
Click to collapse
Same here..
My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
rudolph323 said:
My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
Click to expand...
Click to collapse
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Mistertac said:
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Click to expand...
Click to collapse
G3s to me are finicky about changing or modifying. I modified one build prop setting, rebooted, same thing as op, mine wasn't bootlooping tho, but stuck on the big red 2 screen. Flashtool is your only friend at this point.
sent from my LG G3
Found similar topic about this.. it's jrummy app again, looks like most of his apps are corrupted..
http://forum.xda-developers.com/lg-l90/help/custom-boot-animation-boot-loops-d415-t2856718
Wow, I can't believe I fixed it, I thought it's impossible
I just went into download mode and used LG Flash Tool 2014 to flash to stock firmware..
joeyhdownsouth said:
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
Click to expand...
Click to collapse
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
newstar said:
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I think I read back when I was unbricking that .KDZ files have to be converted to .tot, to use with this version of Flashtool.
Quick Question
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
I believe you can run virtual Windows on a Mac, not sure if it works with Flashtool though.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
Why so serious, use bootcamp and install windows 7 directly, and come into my debt.
Sent from my LG-D855 using Tapatalk
Unable to boot my rooted LG G3 S (beat), stuck at lg logo.
hello everyone. I recently rooted my lg g3 s (beat) D722K. After a few weeks I was trying to install apps as system apps using ES file explorer for which I had to copy the desired apk in the system/apps directory and restart the phone. it worked for a few apps (which I successfully made sys. apps) but not for a majority of apps . Everything was fine until now . After that I wanted to normally install an apk but the phone was unable to install it showing ' application not installed' . Then I tried to install other apps but got the same result . I decided to reboot my phone but it got stuck on lg logo and won't boot .
I tried to factory reset it using hardware keys but after wiping all the phone data it again got stuck on the same sucking LG logo .
I also tried to update firmware by connecting it to windows(8.1) pc in download mode which didn't work either. The firmware download got stuck at 0% everytime I tried.
please help me in getting out of this issue . I will heartily appreciate any help regarding this issue.
thanks.. in advance.
Hi everyone so i tried installing twrp on my lg g pad 8.3 4.4.2. v50020d
And i kept getting the same error when trying to go into recovery.
So i thouth i could fix it and go back to normal with lg support tool but everytime i use lg support tool it stuck on 4% after the tool downloaded the nessesary files first i tougth that i could be that i didn't have enauth space on my device so i i did a factory reset but that made everything wors every time i try to boot my device now it goas automaticly to recovery but there is no recovery to go to .
So i puted my g pad in download mode and tried fixing it with the lg support tool but it still stuck on 4% and asks me to retry after i reboot my device.
sup
I really need help can anyone help me with this problem.
I cannot boot into the os or recovery only thing that happends it try to go into recovery.
The only thing that it can do is go into download mode and lg support tool recognises my device
Sorry for my english i din't pay much attention to my writing i'm a bit frustrated.
Nevermind found a way to fix it aqtuelly its the same way just used like a very old laptop to do it I for some reason couldn't fix it on my newer laptop so had to use an old one, I also managed to install twrp by downgrading my firmware and then installing twrp on it using the same old laptop so yeah it depends a lot on what computer your using
Today I was trying to install a custom rom, but I messed it up and had to reset it to stock rom.
After that I reseted it back to stock rom, I rooted my phone with Kingroot and used this app: https://play.google.com/store/apps/details?id=b007.autorecd855 to install recovery. After that I powered off my phone and now it won't turn on. Already removed battery a plenty of times, when putting in the charger nothing happens, pc won't see it also.
The only moment when my phone lights up is when I remove my battery and put it in the charger, then it basically says that it's charging but with no battery in it. Also when removing the battery and connecting to my pc it only sees it as a unrecognizable device.
Suggestions on what I can do? IF not, poor me, gonna buy a new smartphone then.
Btw, I still have some garanty. Maybe it's worth sending it to the support services.
Extra info:
g3 d855
You used wrong autorec install LP recovery to MM. Download MM version autorec from LG G3 Xda forum. Try flash back to stock or something else. Instructions are in LG G3 Xda forum if you search more. Sorry.
pjadec said:
You used wrong autorec install LP recovery to MM. Download MM version autorec from LG G3 Xda forum. Try flash back to stock or something else. Instructions are in LG G3 Xda forum if you search more. Sorry.
Click to expand...
Click to collapse
Hmm, I was really sure that I used the right one.
Anyway, how can I flash it again if I can't even get the lg logo to show, neither get him in download mode or that my pc recognises him?
Btw, I still have some garanty. Maybe it's worth sending it to lg.
If you have no access to any recovery mode, Fastboot or download mode.then use the method of Qualcomm 9008.btw your warranty is void because you have rooted device and messed with it.
RobinHood_3 said:
Hmm, I was really sure that I used the right one.
Anyway, how can I flash it again if I can't even get the lg logo to show, neither get him in download mode or that my pc recognises him?
Btw, I still have some garanty. Maybe it's worth sending it to lg.
Click to expand...
Click to collapse
I also had same issue and I'm also sure that I used the correct Autorec version.
I sent the phone to LG because the warranty is still valid.
I know how to fix this
RobinHood_3 said:
Today I was trying to install a custom rom, but I messed it up and had to reset it to stock rom.
After that I reseted it back to stock rom, I rooted my phone with Kingroot and used this app: https://play.google.com/store/apps/details?id=b007.autorecd855 to install recovery. After that I powered off my phone and now it won't turn on. Already removed battery a plenty of times, when putting in the charger nothing happens, pc won't see it also.
The only moment when my phone lights up is when I remove my battery and put it in the charger, then it basically says that it's charging but with no battery in it. Also when removing the battery and connecting to my pc it only sees it as a unrecognizable device.
Suggestions on what I can do? IF not, poor me, gonna buy a new smartphone then.
Btw, I still have some garanty. Maybe it's worth sending it to the support services.
Extra info:
g3 d855
Click to expand...
Click to collapse
i remember after 1 day of having this phone this happened this was likely caused by having the latest boot loader i remember this because i fresh installed the marshmallow kdz after that i installed autorec mm it told me to restart and my phone died there, however after spending 8 hours straight i found a solution the smart boot diagnostics tool can write an older version of the boot loader understand that your phone must be in the qdloader9008 mode, if your PC doesn't detect the phone make sure you install the drivers in the zip from the download install the 32 bit if on 32 bit system or install 64 bit on 64 bit system. Hey if you need assistance on doing this Download team viewer and i'll be more than welcome to help unbrick our d855
http://www.4shared.com/postDownload/jACBEo-zba/SmartBootDiagv131_Oversea_SVC_.html
Hello
so i have a big issue / Problem i think
So i had the ROM Installed called Limitless_Full_UX5.0_v10.3_by_Cassoli
But i had a issue where my phone didnt pick up my sim card or Sd card so i tried to flash back to STOCK
But what happend i think is that i accidentaly removed the cable and interupted the Install
So now im not able to boot the phone
im not able to get in download mode
and im not able to get in recovery
Basically my phone is bricked
My phone is getting recognized by my computer as Qualcom 9300 or something like that so i dont know if thats is a good thing or bad thing
I Have already tried to flash with LG FLASHTOOL & boarddiag please help me !