My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
rudolph323 said:
My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
Click to expand...
Click to collapse
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Mistertac said:
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Click to expand...
Click to collapse
G3s to me are finicky about changing or modifying. I modified one build prop setting, rebooted, same thing as op, mine wasn't bootlooping tho, but stuck on the big red 2 screen. Flashtool is your only friend at this point.
sent from my LG G3
Found similar topic about this.. it's jrummy app again, looks like most of his apps are corrupted..
http://forum.xda-developers.com/lg-l90/help/custom-boot-animation-boot-loops-d415-t2856718
Wow, I can't believe I fixed it, I thought it's impossible
I just went into download mode and used LG Flash Tool 2014 to flash to stock firmware..
joeyhdownsouth said:
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
Click to expand...
Click to collapse
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
newstar said:
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I think I read back when I was unbricking that .KDZ files have to be converted to .tot, to use with this version of Flashtool.
Quick Question
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
I believe you can run virtual Windows on a Mac, not sure if it works with Flashtool though.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
Why so serious, use bootcamp and install windows 7 directly, and come into my debt.
Sent from my LG-D855 using Tapatalk
Unable to boot my rooted LG G3 S (beat), stuck at lg logo.
hello everyone. I recently rooted my lg g3 s (beat) D722K. After a few weeks I was trying to install apps as system apps using ES file explorer for which I had to copy the desired apk in the system/apps directory and restart the phone. it worked for a few apps (which I successfully made sys. apps) but not for a majority of apps . Everything was fine until now . After that I wanted to normally install an apk but the phone was unable to install it showing ' application not installed' . Then I tried to install other apps but got the same result . I decided to reboot my phone but it got stuck on lg logo and won't boot .
I tried to factory reset it using hardware keys but after wiping all the phone data it again got stuck on the same sucking LG logo .
I also tried to update firmware by connecting it to windows(8.1) pc in download mode which didn't work either. The firmware download got stuck at 0% everytime I tried.
please help me in getting out of this issue . I will heartily appreciate any help regarding this issue.
thanks.. in advance.
Related
Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance
bilalraybrig said:
Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance
Click to expand...
Click to collapse
I had the same problem. Try downloading several KDZ files cause the programm won't download the good one at once. I got mine at the 4th attempt.
bilalraybrig said:
Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance
Click to expand...
Click to collapse
1: Google logo plus unlock icon seems nexus device. May be he tried to convert it to nexus 4. I never tried it nor know if it requires any different way to get stock, so search.
2: download kdz from here choose 1gb or less kdz.
http://lg-phone-firmware.com/index.php?id_mod=20
Sent from my GT-P3100 using Tapatalk HD
atifsh said:
1: Google logo plus unlock icon seems nexus device. May be he tried to convert it to nexus 4. I never tried it nor know if it requires any different way to get stock, so search.
2: download kdz from here choose 1gb or less kdz.
http://lg-phone-firmware.com/index.php?id_mod=20
Sent from my GT-P3100 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for the help.
I hope this will work
By the way,
What is the problem with greater than 1 GB files?
Just curious
bilalraybrig said:
By the way,
What is the problem with greater than 1 GB files?
Just curious
Click to expand...
Click to collapse
kdz installer we have cant extract files greater than 1.05 GB i do manage to get 1 or 2 files that were 1.08 GB but most wont.
max is 1.05 GB in my experience.
okay, thanks for the information!
Hey! I have done the download, used the update tool in CS_EMERGENCY mode, done with everything. now the phone is stuck on the LG logo..
I put it in recovery mode, and i used the wipe tool which was told in the guide, but the phone again stuck with a lying android bot with an exclamationary sign in a triangle.
What can I do next?
This happens.when you are not reading before. If you would do that,you would see that you need to perform a hard resetafter using kdz updater.
My advice,use the updater again and do a hard reset.on stock it's easy.
Sent from Asylum via LG E975/smart phones,dumb people.
bilalraybrig said:
Hey! I have done the download, used the update tool in CS_EMERGENCY mode, done with everything. now the phone is stuck on the LG logo..
I put it in recovery mode, and i used the wipe tool which was told in the guide, but the phone again stuck with a lying android bot with an exclamationary sign in a triangle.
What can I do next?
Click to expand...
Click to collapse
Don't know what guides you all are using
Only guide you need
1: get kdz 1.05 GB or less for your specific phone
2: using kdz flasher flash the kdz
3: if your phone boots goto backup and reset and do wipe. If not shutdown phone and do hard reset / wipe
4: root your phone And i mean just root your phone.
5: use freegee to unlock boot and get custom recovery. (If you want this)
Sent from my GT-P3100 using Tapatalk HD
U missed the hard reset!! Since kdz is dirty flashing!
This is so frustrating. I've downloaded kdz file so many times from 1.05Gb to a 0.98Gb, none gives a correct extraction in kdz update.
Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
polux400 said:
Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
Click to expand...
Click to collapse
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
polux400 said:
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Click to expand...
Click to collapse
Have you rooted your device with cwm or twrp??
Sent from my LG-E988 using Tapatalk HD
conradwu said:
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
Click to expand...
Click to collapse
Hello. sorry for the delay of answer !
I managed to resolve my problem with the shelp of the member shellnut2, developer of freegee OG Pro Edition I used to root and install cwm at the first time on my G PRO.
You can find how I did that reading these topics :
http://forum.xda-developers.com/showpost.php?p=48136185&postcount=268&nocache=1&z=3099481871415190
http://forum.xda-developers.com/showthread.php?p=48435445
I hope it will help you !!
ps : I have now sold my G Pro and bought a Note 3. Much better device.
Pleaseee help me!!!!!!
Hello, I would appreciate your help because I flinched and my tel ugly now this only in the LG logo screen. I wanted to update my original rom Phone factory and downloaded the latest version before upgrading but I did not wipe data and When there finished the process gave an LG IMS error stopped working this type, and there Could not get into hard reset on the way, OK up here but then I Decided to reinstall the rom again to see if it would correct the error and then I installed the previous version I had downloaded it and my phone is so in the logo screen. If I try to instal the updated rom, would be more risk? And I wonder if I can not like the ace debugging would access via adb and make wipe data factory reset only by simple USB connection? I can not I do the code by turning the volume down and holding power button goes not into hard reset the screen goes black and comes back on the LG logo... Pleaseeeeee help meee!!!!!!
excuse meI, Don´t speak english, I am brazilian...
My phone is a LG G PRO F240L with ROM V9 Feiyu Upgrade for Rom stock V10Z Korea!!
help me
I have also same logo problem on my lg f240l.have u find any thing to solve it
Check my messages below. I gave my solution and 2 links which helped me.
do not use factory reset from android settings/
Flash this file to fix.
Just got the phone today and successfully rooted it and I wanted to see what this xposed framework stuff was about I installed the experimental version (tbh did really read it was experimental it was on the front page so I thought it was alright) and when prompt to reboot I did, but now when rebooting I can't get passed the Lg secruity error screen I tried re-flashing back to stock using this thread http://forum.xda-developers.com/showthread.php?t=2799647 but nothing happens after I plug my G3 back in it just says ready is there any other way to fix this security error?
edit:found out that my model number is actually the f400s (sorry i'm a phone noob) for anyone else out there trying to find your phone model it's actually behind the battery
Kebito said:
Just got the phone today and successfully rooted it and I wanted to see what this xposed framework stuff was about I installed the experimental version (tbh did really read it was experimental it was on the front page so I thought it was alright) and when prompt to reboot I did, but now when rebooting I can't get passed the Lg secruity error screen I tried re-flashing back to stock using this thread http://forum.xda-developers.com/showthread.php?t=2799647 but nothing happens after I plug my G3 back in it just says ready is there any other way to fix this security error?
edit:found out that my model number is actually the f400s (sorry i'm a phone noob) for anyone else out there trying to find your phone model it's actually behind the battery
Click to expand...
Click to collapse
do you have a picture of the error
suljo94 said:
do you have a picture of the error
Click to expand...
Click to collapse
Again I ended up resolving the issue myself and I do not have a picture of the error but I can describe it. When booting my lg g3 the normal big Lg logo appeared then after a bit a smaller lg logo appeared with the words "security error" under it for those looking for a solution to that problem the thread in the op is the correct action to take to resolve the issue. Note doing that wiped everything on my phone which was not a big deal for me but I had to take my phone back the the carrier to input the configuration to access 4g lte again & it unrooted my phone.
i have this same issue can you tell me how you got around it?
jerimynal wiley said:
i have this same issue can you tell me how you got around it?
Click to expand...
Click to collapse
jerimynal wiley the error you get "secure boot error" is caused by image you are trying to boot not being bumped or not properly flashed. I assume you get this error both while trying to access recovery and OS. If that is the case you should use this guide:
http://forum.xda-developers.com/showthread.php?t=2785089&nocache=1
to flash stock firmware on your device.
But if you have a case where you are able to access your recovery (TWRP I assume) you could use one of the custom images provided here: http://forum.xda-developers.com/lg-g3/development (assuming you have D855 version) . Flash them and use them as OS.
Thanks man. I actually could get into recovery so I just flashed another kernel
Sent from my LG-D850 using XDA Free mobile app
Lg G3 Security Error
Hi everyone.. I have problem with my Lg G3... I rooted my phone and when i make TWRP Reccovery, phone doesnt work.. Its says " LG Seccurity Error" and i can't go into download mode or recovery mode.. And when i connect with USB on my PC, PC cant find this device.. Can anyone help me?
Maryanohr said:
Hi everyone.. I have problem with my Lg G3... I rooted my phone and when i make TWRP Reccovery, phone doesnt work.. Its says " LG Seccurity Error" and i can't go into download mode or recovery mode.. And when i connect with USB on my PC, PC cant find this device.. Can anyone help me?
Click to expand...
Click to collapse
Same here..
i bought a used lg g3 and it was rooted its uk model unlocked
i did restore errors seemed to work ok but....
now its stuck in boot loop just turning on with lg logo then restarting
im new to this any help to fix be appreciated
andy
seem to have got phone working it says upgrading apps buit once its done
i get the error pop up google play services has stopped working any ideas ?
Hi!
1. Find and install the drivers for your G3 for Windows.
2. Connect your G3 to the PC by USB, switch it to Internet/Ethernet USB mode.
3. Find and run LGMLauncher.exe (LG Mobile).
4. Once LG Mobile recognizes your G3, choose the menu option in the upper right corner and choose "Update Recovery".
This will completely wipe your phone including your internal storage, get the latest stock ROM for your phone. It might unroot it too, so be aware.
Maybe anyone else with more experience will have less radical suggestions.
Hi it's working using the LG pc suite did optional step and factory reset and phone is back to stock no root or SU on device so I think I'm back to stock and good to go.
Thanks for advice though
Sent from my LG-D855 using XDA Free mobile app
Today I was trying to install a custom rom, but I messed it up and had to reset it to stock rom.
After that I reseted it back to stock rom, I rooted my phone with Kingroot and used this app: https://play.google.com/store/apps/details?id=b007.autorecd855 to install recovery. After that I powered off my phone and now it won't turn on. Already removed battery a plenty of times, when putting in the charger nothing happens, pc won't see it also.
The only moment when my phone lights up is when I remove my battery and put it in the charger, then it basically says that it's charging but with no battery in it. Also when removing the battery and connecting to my pc it only sees it as a unrecognizable device.
Suggestions on what I can do? IF not, poor me, gonna buy a new smartphone then.
Btw, I still have some garanty. Maybe it's worth sending it to the support services.
Extra info:
g3 d855
You used wrong autorec install LP recovery to MM. Download MM version autorec from LG G3 Xda forum. Try flash back to stock or something else. Instructions are in LG G3 Xda forum if you search more. Sorry.
pjadec said:
You used wrong autorec install LP recovery to MM. Download MM version autorec from LG G3 Xda forum. Try flash back to stock or something else. Instructions are in LG G3 Xda forum if you search more. Sorry.
Click to expand...
Click to collapse
Hmm, I was really sure that I used the right one.
Anyway, how can I flash it again if I can't even get the lg logo to show, neither get him in download mode or that my pc recognises him?
Btw, I still have some garanty. Maybe it's worth sending it to lg.
If you have no access to any recovery mode, Fastboot or download mode.then use the method of Qualcomm 9008.btw your warranty is void because you have rooted device and messed with it.
RobinHood_3 said:
Hmm, I was really sure that I used the right one.
Anyway, how can I flash it again if I can't even get the lg logo to show, neither get him in download mode or that my pc recognises him?
Btw, I still have some garanty. Maybe it's worth sending it to lg.
Click to expand...
Click to collapse
I also had same issue and I'm also sure that I used the correct Autorec version.
I sent the phone to LG because the warranty is still valid.
I know how to fix this
RobinHood_3 said:
Today I was trying to install a custom rom, but I messed it up and had to reset it to stock rom.
After that I reseted it back to stock rom, I rooted my phone with Kingroot and used this app: https://play.google.com/store/apps/details?id=b007.autorecd855 to install recovery. After that I powered off my phone and now it won't turn on. Already removed battery a plenty of times, when putting in the charger nothing happens, pc won't see it also.
The only moment when my phone lights up is when I remove my battery and put it in the charger, then it basically says that it's charging but with no battery in it. Also when removing the battery and connecting to my pc it only sees it as a unrecognizable device.
Suggestions on what I can do? IF not, poor me, gonna buy a new smartphone then.
Btw, I still have some garanty. Maybe it's worth sending it to the support services.
Extra info:
g3 d855
Click to expand...
Click to collapse
i remember after 1 day of having this phone this happened this was likely caused by having the latest boot loader i remember this because i fresh installed the marshmallow kdz after that i installed autorec mm it told me to restart and my phone died there, however after spending 8 hours straight i found a solution the smart boot diagnostics tool can write an older version of the boot loader understand that your phone must be in the qdloader9008 mode, if your PC doesn't detect the phone make sure you install the drivers in the zip from the download install the 32 bit if on 32 bit system or install 64 bit on 64 bit system. Hey if you need assistance on doing this Download team viewer and i'll be more than welcome to help unbrick our d855
http://www.4shared.com/postDownload/jACBEo-zba/SmartBootDiagv131_Oversea_SVC_.html