KDZ file extracts corrupt CAB file - LG Optimus G (International)

Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance

bilalraybrig said:
Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance
Click to expand...
Click to collapse
I had the same problem. Try downloading several KDZ files cause the programm won't download the good one at once. I got mine at the 4th attempt.

bilalraybrig said:
Hello guys,
I upgraded my friend's recently purchased LG Optimus G.
I rooted the phone successfully with TWRP recovery.
I Unlocked the boot loader successfully.
I flashed a custom android 4.3 rom.
The phone was working absolutely fine.
Then, my friend took it home with him, and tried to flash another custom rom (He is a noob).
Now, after rebooting, the phone flashed the 'google' logo with a grey 'unlocked lock' icon and the screen goes blank.
I can not even figure out if the phone is on or not (the soft keys does not light up if I touch them).
After all, I tried to use the UNBRICK method using a guide but the problem is that the software won't proceed after extracting .KDZ file.
I tried downloading .KDZ file using the xda app which asks for phone model and serial number for the download, several times but no success.
I tried downloading the .KDZ file using a URL in which i have to write the IMEI number to get myself a download link. That shows corrupted too.
Can anybody help me to get a working KDZ file?? I think this will get me through the process.
OR
If there is any other possible way, please let me know.
Thanks in advance
Click to expand...
Click to collapse
1: Google logo plus unlock icon seems nexus device. May be he tried to convert it to nexus 4. I never tried it nor know if it requires any different way to get stock, so search.
2: download kdz from here choose 1gb or less kdz.
http://lg-phone-firmware.com/index.php?id_mod=20
Sent from my GT-P3100 using Tapatalk HD

atifsh said:
1: Google logo plus unlock icon seems nexus device. May be he tried to convert it to nexus 4. I never tried it nor know if it requires any different way to get stock, so search.
2: download kdz from here choose 1gb or less kdz.
http://lg-phone-firmware.com/index.php?id_mod=20
Sent from my GT-P3100 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for the help.
I hope this will work

By the way,
What is the problem with greater than 1 GB files?
Just curious

bilalraybrig said:
By the way,
What is the problem with greater than 1 GB files?
Just curious
Click to expand...
Click to collapse
kdz installer we have cant extract files greater than 1.05 GB i do manage to get 1 or 2 files that were 1.08 GB but most wont.
max is 1.05 GB in my experience.

okay, thanks for the information!

Hey! I have done the download, used the update tool in CS_EMERGENCY mode, done with everything. now the phone is stuck on the LG logo..
I put it in recovery mode, and i used the wipe tool which was told in the guide, but the phone again stuck with a lying android bot with an exclamationary sign in a triangle.
What can I do next?

This happens.when you are not reading before. If you would do that,you would see that you need to perform a hard resetafter using kdz updater.
My advice,use the updater again and do a hard reset.on stock it's easy.
Sent from Asylum via LG E975/smart phones,dumb people.

bilalraybrig said:
Hey! I have done the download, used the update tool in CS_EMERGENCY mode, done with everything. now the phone is stuck on the LG logo..
I put it in recovery mode, and i used the wipe tool which was told in the guide, but the phone again stuck with a lying android bot with an exclamationary sign in a triangle.
What can I do next?
Click to expand...
Click to collapse
Don't know what guides you all are using
Only guide you need
1: get kdz 1.05 GB or less for your specific phone
2: using kdz flasher flash the kdz
3: if your phone boots goto backup and reset and do wipe. If not shutdown phone and do hard reset / wipe
4: root your phone And i mean just root your phone.
5: use freegee to unlock boot and get custom recovery. (If you want this)
Sent from my GT-P3100 using Tapatalk HD

U missed the hard reset!! Since kdz is dirty flashing!

This is so frustrating. I've downloaded kdz file so many times from 1.05Gb to a 0.98Gb, none gives a correct extraction in kdz update.

Related

[Q] Optimus stuck on LG logo screen

I have a sprint Optimus G [LG Ls970] i rooted it using http://forum.xda-developers.com/showthread.php?t=2039421 , everything seemed to be fine , until i rebooted the phone now it is stuck at the LG logo , i can't get it into recovery mode, it should have clockword mod on it. When trying this method [http://forum.xda-developers.com/showthread.php?t=2010624] I don't understand how to obtain the KDZ files , when downloading the firmware file it is in cab format and then when extracted there are 3 files none of which are KDZ . Please help I just got my phone.
Limeque said:
I have a sprint Optimus G [LG Ls970] i rooted it using http://forum.xda-developers.com/showthread.php?t=2039421 , everything seemed to be fine , until i rebooted the phone now it is stuck at the LG logo , i can't get it into recovery mode, it should have clockword mod on it. When trying this method [http://forum.xda-developers.com/showthread.php?t=2010624] I don't understand how to obtain the KDZ files , when downloading the firmware file it is in cab format and then when extracted there are 3 files none of which are KDZ . Please help I just got my phone.
Click to expand...
Click to collapse
Brick Please contact me for Cheapest Jtag solution.
Thanks.
Not necessarily a brick if you have clockworkmodrecovery on it. Google how to get into recovery for your device. I would provide links but I'm on my phone. I bricked my Optimus V because I rooted and didn't have a recovery, and tried to factory reset. I have learned my lesson from that one Also to the guy above me ^ you should suggest ways to fix for free first because there are plenty Simply try returning to where you bought it, worked for me thankfully.
Sent from my Nexus 4 using xda premium
I fixed it
tomy1986.nt said:
Brick Please contact me for Cheapest Jtag solution.
Thanks.
Click to expand...
Click to collapse
Phone is fine now , used LGNPST , thankkks tho bud :]

[Q] [Help] LG Optimus G E975 bricked and no method is working to solve the issue!!!

Hi devs
I am an unfortunate soul as my recently purchased LGOG E975 just got bricked. The whole story goes like this -
I successfully rooted the phone one week ago and it was working fine until yesterday when I uninstalled the Google Play Movies app via Root Delete app. The problem started when I restarted the phone - it gave a "Security error" on boot and went into restart loop. Worried I searched at Xda forum for the solution and tried the "TeenyBins" method first (here http://forum.xda-developers.com/showthread.php?t=2249500). But it only aggravated the problem - at 85% of process the phone showed as disconnected from LGNPST and after trying many times the same problem persisted (the process never got to 100%). However the method installed TWRP custom recovery in the phone and a Google Logo replaced the LG logo at boot. Phone was normally booting in download mode and custom recovery but the recovery is unable to do anything - it shows as "Failed" whenever I try to wipe any cache, mount any partition, flash any custom ROM (which I pushed via adb) or take backup. Rather it shows "No OS installed" whenever I reboot, power off etc. TWRP is also showing no data inside sdcard via the inbuilt file manager. What is the problem?
Fed up, I tried LG Support tool - phone is successfully detected in "download mode" (everything is shown including the OS version which means OS is intact). I choose "phone recovery" option in LG support tool and it successfully downloaded the stock firmware (about 1.1 GB wait wait and wait) and when it tried to flash the phone it showed as the phone is not connected and instructed to unplug the phone and restart it and then again connect to PC. I followed everything carefully putting the phone in download mode again but again and again same error......Oh God for heavens sake....
Fed up, I then tried this method (http://forum.xda-developers.com/showthread.php?t=2010624) - downloaded the latest KDZ (>1GB) according to my phone from LG servers and used the KDZ FW Updater to flash the phone but the tool gave error "File extracted error" and I repeated the process again and again but no avail..............here I am, after 48 hours of desperation having a phone with the same **** Google logo on boot and the screen goes black...nothing happens thereafter..
Please forum devs, experts, moderators or any kind soul, I beg you to help me.... :crying:
If yu ve done the second method before instead of lgnpst tool there may b chances of helping yu.... And make sure which bin nd dll file yu flashed...??
Sent from my LG-E975 using xda premium
OK One question.
Can you get into download mode? Flash MODE?
Follow this
1.Install all drivers LG
2.Download firmware from here http://www.lg-phones.org/official-stock-lg-optimus-g-firmware-rom.html
3.Download http://www.mediafire.com/download/sj5y073xal03ntw/KDZ_FW_UPD_EN.rar
4.Extract KDZ_FW_UPD on desktop
5.Install msxml.exe
6.When done run windows enabler. You will see the icon and left klick on it and choose ON
Now you should se ON at the ICON
7.When done start KDZ_FW_UPD.exe
8.Chose 3GQCT in TYPE and Phone Mode CS_Emergency
9.Then Turn of the Phone. Now hold Vol UP and Vol Down at same time. Hold and plug in the USB cable into your phone
Now you should be in DOWNLOAD mode
10.Now chose your firmware in KDZ File and press Launch Software Update
If it starts to flash dont interrupt it until you see PARAM 1 again. You phone will auto reboot at PAram 95 but dont discconect until you see PARAM 1 again.
If you get bootloop when restart give it 2 min. If it keeps show LG logo then turn of and do FACTORY RESET
Hold Vol up + Power at same TIME i think Now you should get Factory Reset MENU. Now press power again and it should work.
GOOD LUCK
Re
bihslk said:
OK One question.
Can you get into download mode? Flash MODE?
Follow this
1.Install all drivers LG
........
4.Extract KDZ_FW_UPD on desktop
5.Install msxml.exe
6.When done run windows enabler. You will see the icon and left klick on it and choose ON
Now you should se ON at the ICON
7.When done start KDZ_FW_UPD.exe
8.Chose 3GQCT in TYPE and Phone Mode CS_Emergency
9.Then Turn of the Phone. Now hold Vol UP and Vol Down at same time. Hold and plug in the USB cable into your phone
Now you should be in DOWNLOAD mode
10.Now chose your firmware in KDZ File and press Launch Software Update
If it starts to flash dont interrupt it until you see PARAM 1 again. You phone will auto reboot at PAram 95 but dont discconect until you see PARAM 1 again.
If you get bootloop when restart give it 2 min. If it keeps show LG logo then turn of and do FACTORY RESET
Hold Vol up + Power at same TIME i think Now you should get Factory Reset MENU. Now press power again and it should work.
GOOD LUCK
Click to expand...
Click to collapse
Thanks for your time dear
but I have exactly followed the process you mentioned and unfortunately still got the KDZ extract error. I have downloaded KDZ for my phone from different locations multiple times but none of the KDZ worked with KDZ FW Updater. It looks like the current KDZ FW Updater is unable to handle the large KDZ files (>1GB) of newer phones while it works fine for older smaller KDZs. In this way this updater is a bit outdated. I request the developers to please update this wonderful tool to make it compatible with latest KDZs.
Try using kdz from romania,it has 982 mb and it's 10D.
Sent from LG E975 pwd by CM 10.1
technomedico said:
Thanks for your time dear
but I have exactly followed the process you mentioned and unfortunately still got the KDZ extract error. I have downloaded KDZ for my phone from different locations multiple times but none of the KDZ worked with KDZ FW Updater. It looks like the current KDZ FW Updater is unable to handle the large KDZ files (>1GB) of newer phones while it works fine for older smaller KDZs. In this way this updater is a bit outdated. I request the developers to please update this wonderful tool to make it compatible with latest KDZs.
Click to expand...
Click to collapse
But i flashed mine KDZ and its above 1GB and it extracted without issue. It must be something with your PC or something.
Mine extracted without issues
I think you have CORRUPT DOWNLOADS.
Do you unzip the KDZ file from the RAR? Or do you point KDZ Updater to the RAR file? You must unpack RAR so you file will be shown as E97510B_00.KDZ this is the Europe Open Version.
Remember if you unrar the file check if any errors coming when unpacking. If so then your RAR is corrupted and you need to redownload.
'did you RUN Updater as ADMIN?
Download this version of the KDZ European Open
17. lgmobile.com/LGE975/ANEUBL/E97510B_00/E97510B_00.kdz
http://www.lg-phones.org/official-stock-lg-optimus-g-firmware-rom.html
It must WORK.
---------- Post added at 01:47 PM ---------- Previous post was at 01:44 PM ----------
kimitza said:
Try using kdz from romania,it has 982 mb and it's 10D.
Sent from LG E975 pwd by CM 10.1
Click to expand...
Click to collapse
It doesnt matter. Mine is on 1GB and extracted without problem
Re
bihslk said:
But i flashed mine KDZ and its above 1GB and it extracted without issue. It must be something with your PC or something.
Mine extracted without issues
I think you have CORRUPT DOWNLOADS.
Do you unzip the KDZ file from the RAR? Or do you point KDZ Updater to the RAR file? You must unpack RAR so you file will be shown as E97510B_00.KDZ this is the Europe Open Version.
Remember if you unrar the file check if any errors coming when unpacking. If so then your RAR is corrupted and you need to redownload.
'did you RUN Updater as ADMIN?
Download this version of the KDZ European Open
17. lgmobile.com/LGE975/ANEUBL/E97510B_00/E97510B_00.kdz
It must WORK.
Click to expand...
Click to collapse
I have the .KDZ file and not .rar but I did not run the program as admin so will try again. It may be a corrupt download so will download again.
One question though, my phone is E97510E_00 (Indian version) so can I flash with the 10B open Europ. version KDZ you mentioned above?
Basically all firmwares are identical.the only differences are operator related. If you can find what are the 4g/lte frequencies of your operator,i could tell you what europe firmware to flash.if you don't have/want 4g,i guess you could flash the latest 10D european kdz without problems.
Sent from LG E975 pwd by CM 10.1
Mate just flash EU version so you can have working phone. If you sucess you can seek for answer later to flash indian ver.
Sent from my LG-E975 using xda premium
exactly same problem!
hello my friend,
i have exactly the same problem as you with the same results.today ill try doing this in a desktop and see if the extract problem is gone...it drives me crazy.
please if yu fing something write it here...you ll save me!thank you!
p.s. i have f180 U+ edition
ok i found solution combining all of what i ve read..(and read a lot)
1)find a custom rom (i used avatar) but unzip it and go to \META-INF\com\google\android and open updater script with notepad.Delete this "(assert(getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975");"
then save the file.
go to first folder that u unzipped and take MetaInf,boot img and system and put them in a new zip.
2)so since u have twrp in your telephone,push with adb the zip from step 1 inside the phone (how to push a rom here)
3)the phone will normally open when you reboot.if you dont have signal go here and download your phones modem.Copy it through your pc to your phone and then reboot again to recovery mode and install this file(do not unzip it)
clear cache,do a factory reset and in the next boot you ll be allright!
hi
MafiaGR said:
ok i found solution combining all of what i ve read..(and read a lot)
1)find a custom rom (i used avatar) but unzip it and go to \META-INF\com\google\android and open updater script with notepad.Delete this "(assert(getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975");"
then save the file.
go to first folder that u unzipped and take MetaInf,boot img and system and put them in a new zip.
2)so since u have twrp in your telephone,push with adb the zip from step 1 inside the phone (how to push a rom here)
3)the phone will normally open when you reboot.if you dont have signal go here and download your phones modem.Copy it through your pc to your phone and then reboot again to recovery mode and install this file(do not unzip it)
clear cache,do a factory reset and in the next boot you ll be allright!
Click to expand...
Click to collapse
Hi,
Really excited, but can u please tell me the step by step procedure. My phone is a F180L korean Sim and i really dont know which is my actual make.. i mean like E973 or E975. I bought this phone to india and unfortunately its U+ sim locked and i was unable to use this phone in indian networks. Hence after going trough this forum, i learned how to change a firmware and how to convert this phone to E975 and i downloaded one for india from the official LG site and there were KDZ extraction error. i tried it with the LG PC sync method and its showing the memory is low and free up some space in the memory. but after downloading a firmware for Europe, i could update my phone into E975, but my indian sim is not getting connected. So i request everyone for a solution. I tried many things already and soft bricked many times.. luckily i could recover it using LG support.
SO KINDLY TELL US HOW U DID IT WITH THE AVATAR ROM AND WHAT DO U MEAN BY \META-INF\com\google\android.
Many thanks
NJ
nijujose said:
Hi,
Really excited, but can u please tell me the step by step procedure. My phone is a F180L korean Sim and i really dont know which is my actual make.. i mean like E973 or E975. I bought this phone to india and unfortunately its U+ sim locked and i was unable to use this phone in indian networks. Hence after going trough this forum, i learned how to change a firmware and how to convert this phone to E975 and i downloaded one for india from the official LG site and there were KDZ extraction error. i tried it with the LG PC sync method and its showing the memory is low and free up some space in the memory. but after downloading a firmware for Europe, i could update my phone into E975, but my indian sim is not getting connected. So i request everyone for a solution. I tried many things already and soft bricked many times.. luckily i could recover it using LG support.
SO KINDLY TELL US HOW U DID IT WITH THE AVATAR ROM AND WHAT DO U MEAN BY \META-INF\com\google\android.
Many thanks
NJ
Click to expand...
Click to collapse
so this is what i did.
1.use LGNPST prog with the small file for installing TWRP in your phone (see how here)
2.Download a custom ROM.I used this.The file will be in ZIP format/
3.copy your rom in a new folder.Rightclick on ROM and press extract here.The extracted files will be 2 folders (METAINF,SYSTEM) and boot.img.Open META-INF\com\google\android (these are folders) and there will be a file "updater script ".Right click on this file and select open with notepad.Then delete the following " (assert(getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"); ".Press ctrl+s to save the file.
4.Go to the starting folder,select again METAINF,SYSTEM and boot.img ,right click them and press add to archive(with winrar).In there give a name and be sure to select zi compression.So this new ZIP you've just created is the new ROM.
5.Now you have to send the ZIP you created to your phone.This can be done with ADB push.To read how to do it please read here
6.Once you transfer that file into phone you have to disconnect your phone and press vol+ button and then power on.This is FASTBOOT.Press 2 time the vol- button so it says RECOVERY MODE.Then press the power button and wait to open the TWRP menu.
7.Now that you are in TWRP select wipe and wipe dalvik,cache and do factory reset.Then go to install and youll see the pushed ZIP file that you transfered before.Click on this and press install.
8.After a while it will write that is done.Do a reboot and the new ROM will be fine.
9.If it opens and you dont have signal go to this site here and download the modem for your phone.Mine worked with Korean version modem.I dont know what you should install for Pakistan unfortunatelly.So when you download it,send it in your phone through usb connection (now your phone works,no need of ADB push) and then go to TWRP in recovery mode and install modem like the way you installed the ROM before.Wipe data again and do a factory reset and then your phone should be ok.
BTW you have to know that these ROMS have some bugs but you can do epic customization and the guys always update the rom over the air to do it more stable.
If you have any question feel free to make them!Good luck!
MafiaGR said:
so this is what i did.
1.use LGNPST prog with the small file for installing TWRP in your phone (see how here)
2.Download a custom ROM.I used this.The file will be in ZIP format/
3.copy your rom in a new folder.Rightclick on ROM and press extract here.The extracted files will be 2 folders (METAINF,SYSTEM) and boot.img.Open META-INF\com\google\android (these are folders) and there will be a file "updater script ".Right click on this file and select open with notepad.Then delete the following " (assert(getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"); ".Press ctrl+s to save the file.
4.Go to the starting folder,select again METAINF,SYSTEM and boot.img ,right click them and press add to archive(with winrar).In there give a name and be sure to select zi compression.So this new ZIP you've just created is the new ROM.
5.Now you have to send the ZIP you created to your phone.This can be done with ADB push.To read how to do it please read here
6.Once you transfer that file into phone you have to disconnect your phone and press vol+ button and then power on.This is FASTBOOT.Press 2 time the vol- button so it says RECOVERY MODE.Then press the power button and wait to open the TWRP menu.
7.Now that you are in TWRP select wipe and wipe dalvik,cache and do factory reset.Then go to install and youll see the pushed ZIP file that you transfered before.Click on this and press install.
8.After a while it will write that is done.Do a reboot and the new ROM will be fine.
9.If it opens and you dont have signal go to this site here and download the modem for your phone.Mine worked with Korean version modem.I dont know what you should install for Pakistan unfortunatelly.So when you download it,send it in your phone through usb connection (now your phone works,no need of ADB push) and then go to TWRP in recovery mode and install modem like the way you installed the ROM before.Wipe data again and do a factory reset and then your phone should be ok.
BTW you have to know that these ROMS have some bugs but you can do epic customization and the guys always update the rom over the air to do it more stable.
If you have any question feel free to make them!Good luck!
Click to expand...
Click to collapse
Thanks a Lot MafiaGR....
I didn't tried this yet as i did a different method and i am using it on trial basis. is it works.. then i am more than happy enough to continue... let me explain what i did.. I have rooted my F180L korean U+ sim unlocked phone with motochopper. After rooting the same, then i unlocked my bootlocker with freegee-beta (many thanks to Shell). Then i downloaded a kdz file (E97510D_00.kdz , Europe Open) from the LG server. then i updated the same by putting my phone in download mode (volume up+volume down + USB connected + power ON) and updated with KDZ updated program.. after quite some time my phone got rebooted with E975 Europe Open firmware. Even after this i was unable to get indian network in the phone. So Using Rom manager, i downloaded CyanogenMod 10.1 Rom with GApps and flashed my ROM again. Now my phone is getting connected with indian network. but the problem i am facing is with my network not getting registered... i can find about 12 networks in my phone but unable to register into any of them...Need help from u guys...
Thanks in advance
NJ
Finally I got the problem solved and my phone back !!
Unfortunately nothing worked for me as suggested by you, guys may be I was doing something wrong or else.
Finally I decided to contact LG Service Center in my city and after initial try they told me that "the phone is not getting connected in flashing mode" and I had to submit the phone to them. Next day they called me and told that there is a hardware problem and a "part/PCB" will be replaced within next 7 days. And today they called me again with the good news - your phone has been repaired and I can pick it up anytime. Elated I got the phone within an hour, live and kicking. Thank God I got my loving phone back and most importantly they did not detected that the phone was rooted and thus out of warranty. Lucky me!!! :laugh:
Any way thanks everyone for your prompt help....:good:
nijujose said:
Thanks a Lot MafiaGR....
I didn't tried this yet as i did a different method and i am using it on trial basis. is it works.. then i am more than happy enough to continue... let me explain what i did.. I have rooted my F180L korean U+ sim unlocked phone with motochopper. After rooting the same, then i unlocked my bootlocker with freegee-beta (many thanks to Shell). Then i downloaded a kdz file (E97510D_00.kdz , Europe Open) from the LG server. then i updated the same by putting my phone in download mode (volume up+volume down + USB connected + power ON) and updated with KDZ updated program.. after quite some time my phone got rebooted with E975 Europe Open firmware. Even after this i was unable to get indian network in the phone. So Using Rom manager, i downloaded CyanogenMod 10.1 Rom with GApps and flashed my ROM again. Now my phone is getting connected with indian network. but the problem i am facing is with my network not getting registered... i can find about 12 networks in my phone but unable to register into any of them...Need help from u guys...
Thanks in advance
NJ
Click to expand...
Click to collapse
maybe you hae to try diferent modems for the mobile phone until you find the right one.Mine works with the Korean modem although i live in Greece.You may have to find exactly in what frquency your provider works and then see where in the world a provider has exasctly the same frequency as yours,and then download the modem drivers from the LGOGs that work in this country.
Hope it works!
---------- Post added at 08:59 PM ---------- Previous post was at 08:53 PM ----------
technomedico said:
Unfortunately nothing worked for me as suggested by you, guys may be I was doing something wrong or else.
Finally I decided to contact LG Service Center in my city and after initial try they told me that "the phone is not getting connected in flashing mode" and I had to submit the phone to them. Next day they called me and told that there is a hardware problem and a "part/PCB" will be replaced within next 7 days. And today they called me again with the good news - your phone has been repaired and I can pick it up anytime. Elated I got the phone within an hour, live and kicking. Thank God I got my loving phone back and most importantly they did not detected that the phone was rooted and thus out of warranty. Lucky me!!! :laugh:
Any way thanks everyone for your prompt help....:good:
Click to expand...
Click to collapse
well this is the best choice,even if they say that if you root your mobile phone,you lose the guarantee.But its a bit difficult for me to do that since i ordered the mobile phone from Chine and i live in Greece!So i should give away my phone a long time to get fixed and i cant wait!XD
U r right.. problem with the Modem...
Originally Posted by nijujose
Thanks a Lot MafiaGR....
I didn't tried this yet as i did a different method and i am using it on trial basis. is it works.. then i am more than happy enough to continue... let me explain what i did.. I have rooted my F180L korean U+ sim unlocked phone with motochopper. After rooting the same said:
Many thanks MafiaGR
You are absolutely correct. The problem for me was with the Modem for sure. I flashed with a Nexus 4 modem in my phone and i could register network in my phone. but the problem now is that the signal is very weak. I tried flashing many modems like E970 Att, then E973 Tellus and few more.. but i couldnt get a better signal. if the signal is good, then the sim is not getting registered. i tried to search for an indian modem for E975 which i couldnt find.. moreover i am unable to download the indian/thailand/hongkong firmwares from LG official site as its saying that the Access is denied. Please help me with those links as i am really desperate to use my phone...
Thanks again
NJ
Click to expand...
Click to collapse
If you dont use 3g or lte change ti 2g
Skickat från min LG-E975 via Tapatalk 2
Phone reboots; post custom rom
HI MafiaGR
I followed every step and managed to install custom rom , tried avatar , thinking bridge, cm10.1 nightly, but once boot the phone hangs and reboot and gives kernel crash message . I tried CM10.1 with Kite r30 kernel , no crash report but still phone reboots.
Do help.
suratvijay said:
HI MafiaGR
I followed every step and managed to install custom rom , tried avatar , thinking bridge, cm10.1 nightly, but once boot the phone hangs and reboot and gives kernel crash message . I tried CM10.1 with Kite r30 kernel , no crash report but still phone reboots.
Do help.
Click to expand...
Click to collapse
Install Rom. Reboot recovery. Flash Kernel then wipe dalvik, wipe cache, factory reset then reboot.
Sent from my LG-E975 using xda premium

[Q] Bootloop, and factory reset is stuck [SOLVED]

My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
rudolph323 said:
My device is rooted with towelroot, I installed supersu afterwards...
before bootloop I installed fontexplorer, and installed few fonts, it asked me to reboot, i rebooted, and now it just bootloop's all the time, LG animation and vibration, I can't get into fastmode, tried all kinds of button combinations..
When I try to factory reset, after pressing yes it shows erasing, and then it's stuck on boot logo, not animation..
Download mode is stuck also, just shows 0% but at least then pc's device manager shows com device found
How to fix this ?
All this happened after I rebooted my phone, before rebooting I installed few fonts with Font Installer ★ Root ★(com.jrummy.font.installer) app
Click to expand...
Click to collapse
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Mistertac said:
That stinks huh?!
I've been using iFont and Fontster from the Play Store without any issues for future reference.
- Tapatalked from the G3
Click to expand...
Click to collapse
G3s to me are finicky about changing or modifying. I modified one build prop setting, rebooted, same thing as op, mine wasn't bootlooping tho, but stuck on the big red 2 screen. Flashtool is your only friend at this point.
sent from my LG G3
Found similar topic about this.. it's jrummy app again, looks like most of his apps are corrupted..
http://forum.xda-developers.com/lg-l90/help/custom-boot-animation-boot-loops-d415-t2856718
Wow, I can't believe I fixed it, I thought it's impossible
I just went into download mode and used LG Flash Tool 2014 to flash to stock firmware..
joeyhdownsouth said:
THIS guide will help, you've softbricked, only in this guide you will of course need the dll and tot files for your phone and not Sprint. As long as phone comes on,computer recognizes it, and, it goes into dl mode, you should be good.
sent from my LG G3
Click to expand...
Click to collapse
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
newstar said:
If phone is not sprint, then KDZ method works too?
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I think I read back when I was unbricking that .KDZ files have to be converted to .tot, to use with this version of Flashtool.
Quick Question
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
I believe you can run virtual Windows on a Mac, not sure if it works with Flashtool though.
athena0729 said:
Hey guys,
I am a bit of a rookie with rooting and i have an LG G3 for tmobile. I rooted my phone and had TWRP installed and accidentally attempted to install a software update and it soft bricked my phone. Here is my problem-all of the solutions i am finding for this issue require a PC, and I, unfortunately, am only running on mac software. I have no way to get lg flash on my mac and to make it comparable with my phone. Is there ANYONE who can help me? I am at my wits end and CANNOT believe I was so stupid as not to make a backup flash but I, as per usual, did not think about it at the time. If anyone could help me, I will be forever in your debt.
Click to expand...
Click to collapse
Why so serious, use bootcamp and install windows 7 directly, and come into my debt.
Sent from my LG-D855 using Tapatalk
Unable to boot my rooted LG G3 S (beat), stuck at lg logo.
hello everyone. I recently rooted my lg g3 s (beat) D722K. After a few weeks I was trying to install apps as system apps using ES file explorer for which I had to copy the desired apk in the system/apps directory and restart the phone. it worked for a few apps (which I successfully made sys. apps) but not for a majority of apps . Everything was fine until now . After that I wanted to normally install an apk but the phone was unable to install it showing ' application not installed' . Then I tried to install other apps but got the same result . I decided to reboot my phone but it got stuck on lg logo and won't boot .
I tried to factory reset it using hardware keys but after wiping all the phone data it again got stuck on the same sucking LG logo .
I also tried to update firmware by connecting it to windows(8.1) pc in download mode which didn't work either. The firmware download got stuck at 0% everytime I tried.
please help me in getting out of this issue . I will heartily appreciate any help regarding this issue.
thanks.. in advance.

[F460K Only!] Unbricking package and guide

Finally I've managed to unbrick the phone after the stupid fail with the configs tuning.
Warning: Everything will be wiped from the internal storage. I mean NO ONE BYTE WILL SURVIVE.
First of all download the archive I've prepared. It content is:
LG Mobile driver – LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3
LG Flash Tool – Setup_LGFlashTool_1.8.1.1023
Proprietary DLL for the phone – LGF460K_20140708_LGFLASHv160
And the diamond – LGF460KAT-00-V10o-KT-KR-OCT-22-2014+0.tot
Take it here: http://unl.su/f460k_unbrick.zip
Mirror: https://mega.co.nz/#!aA5gET6D!fE5brJiM6Okv0kmzrjoZ-dEmAe78KslJMuUMSKBWyxQ
After you have managed to download and unpack it, do the following:
1. Disconnect the phone
2. Install the drivers (this version differs from S50 for about 60 kilobytes but they're important for the F460 series phones)
3. Follow this illustrated flashing guide: http://forum.xda-developers.com/showthread.php?t=2772199
4. If the phone is stuck at blue screen with the number "3" for longer than 10 minutes – take out the cable, battery, and pu the battery back, connecting the cable is unnecessary. Then power on the phone.
5. After reboot an Android with revolving crystal will appear for about 30 seconds - it's ok.
6. Wait for Olleh logo.
7. Here you are. Thanks meter is on the left.
is there a way to remove bootloader? on this model? i can't install any zip file... when use flashify to install any .img the phone locks up on "fastmode" and that model doesn't have "factory reset" only "secude mode" (like windows). Any idea how to install Twrp or any other for F460K? Thanks.
Great work I flashed SphinX on my F460K is there any better ROM available on net? or stock one is good?
pls help, i am getting strange error
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
nauman284 said:
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
Click to expand...
Click to collapse
You need to flash it one more time... it is better to use lg flash tools
nauman284 said:
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
Click to expand...
Click to collapse
i think phone of you hand logo, right?
is this f460k cat6?
dashand said:
is this f460k cat6?
Click to expand...
Click to collapse
Yes
Model different in lg flash tool
I see different model name in the flash tool I believe it should be MCF460K
anyone tried installing this stock rom with different model name in display..... Please confirm. I have f460k olleh waiting for confirmation to flash it....under bootloop
Appreciate your suggestion friends
Same problem with nauman284.
Please help me.
Help me e
How to Donwgrade Marshmellows to Lolipop and Install TWRP ??
Please help me, my Lg G3 F460k is dead, no download, no recovery, only "Qualcomm HS-USB QDLoader 9008" in the device manager of windows 7, what can I do?
Thanks brothers

[Solution] if you flashed the wrong firmware on your LG G2

First of all I want to Thank cybertag (a member at reddit.com) whose help made me find this solution. And sorry if my English is not good, it is not my first language. As I don't have enough posts here, XDA restricts me to post external links so this is the best I could do. I will add links to the files needed once i am allowed.
A few days ago I was tinkering with after my lg g2 ls-980, the sprint version of lg g2, rooted but no custom recovery installed and I made my first mistake of changing the model number from ls-980 to D802 in built.prop file thinking that it will only change the model number shown in the hardware information and restarted the phone. Once my phone booted up after that restart everything was crashing. There was a huge number of crash reports popping on the screen and I was not able to use anything. So I downloaded the .tot files of the stock firmwares LS980ZVC and LS980ZVE (don't know why but I downloaded both) along with the .dll file needed to flash the firmware for ls980 and when I tried to flash the firmware booting the phone in download mode and using the LG Flash tool but it gave me an error saying that the firmware does not match with model number of my phone. Both firmwares gave the same error. My phone and the flash tool both were thinking it was D802 while it was not.
Now i made my second mistake and downloaded the stock firmware for D802 and flashed it using LG flash tool. The firmware was flashed successfully without any error, but when the phone booted up after the flash the touch screen was behaving funny and phone restarted every 15-20 seconds because this firmware was not meant to be used with LS-980. I was unable to do anything the way touch screen was behaving.
I spent most of my time for the next few days googling for the solution and searching on XDA and also on reddit. I found multiple threads reporting that a generic no-check DLL file is the savior in this situation, but when I tried to run it I get continuous errors telling me the following: "CrossDL [D8012] to [LS-980]". Then i found this thread by cybertag on reddit which lead me to the right direction. It suggested to hex edit the .tot file for ls-980 so that the flash tool thinks that it is for D802. So I grabbed a hex editor and found the first mention of LS-980 and changed it to D802, saved the file and tried o flash it but it was still giving different errors. Then someone suggested it only works if you edit the .tot firmware in linux based OS. So i installed ubuntu OS on a virtual machine and tried editing the firmware in that OS using Bless Hex editor, still no success in flashing. Then I tried editing in pinguy OS but in vain. Then I found FlexHex for windows and used it for editing the LS980ZVC.tot firmware did the same thing, found the first mention of LS-980 and changed it to D802, saved the file, flashed it and bingo! the flash tool gave no error this time and flashed the phone successfully.
Now there was another problem. When the phone rebooted after flashing the firmware it got stuck on LG logo forever. And when I tried to boot it into download mode, the download mode was gone and it took me to fastboot mode. The phone was stuck in bootloop and there was no download mode anymore. Now after more searching i found a method to resolve this problem. Downloaded the aboot.img and laf.img partitons for LS980ZVC and flashed both using fastboot commands. Tried to boot into the download mode again and it worked and i was in download mode one again. When I checked the phone model was changed back to LS-980, the original one. Flashed the LS980ZVE firmware from original .tot file as it was the latest version available to date and it flashed without any error. When the phone rebooted after completing the flashing process, it was as good as new, up and running the original stock kitkat rom for this model. Tested and tried everything and never noticed any issue.
Thank you @tauheed that will help a lot of people I'm sure.
Thank reddit member cybertag out there to.
please help
Hi sir!
i think i got just the problems with yours, but i not sure how to get my phone into fastboot mode no matter how many i press the [power+volume up] it just start up and stay at lg logo screen forever.
Can you explain how to get my LS980 into fastboot mode step by step, if i can put it in fastboot mode, i think i can fix it. please help
secret.animal said:
Thank you @tauheed that will help a lot of people I'm sure.
Thank reddit member cybertag out there to.
Click to expand...
Click to collapse
First of all, i'm sorry for my bad english.
i having the same problems as him. my LS980 is stuck at LG logo screen (not rebooting) it just stay there forever!
when i tried to boot it into download mode, at first i thought gonna successfully boot into download mode, but it DID NOT.
Please refer to my picture below to get better understanding what i'm trying to explain and again i'm sorry for my bad english.
My pc can detect my LS980 but not in fastboot mode, i mean if i try to boot into download mode then my pc won't detect it.
I really NEED some videos if possible of how to fix this, a million thanks!!!
[email protected] said:
Hi sir!
i think i got just the problems with yours, but i not sure how to get my phone into fastboot mode no matter how many i press the [power+volume up] it just start up and stay at lg logo screen forever.
Can you explain how to get my LS980 into fastboot mode step by step, if i can put it in fastboot mode, i think i can fix it. please help
Click to expand...
Click to collapse
what happens when you try to boot in to download mode?
it it stuck at download mode or something else happens?
Looks to be stuck with a broken download mode. His laf partition is broken.
tauheed90 said:
what happens when you try to boot in to download mode?
it it stuck at download mode or something else happens?
Click to expand...
Click to collapse
its just stuck like the picture that i attached below . it won't go any future.
Can you help fix this?
or what can i do to fix it?
i got a LG G2 LS980
secret.animal said:
Looks to be stuck with a broken download mode. His laf partition is broken.
Click to expand...
Click to collapse
hi m8, do you know how can i fix this?
please i really need some HELP over here, thank for reply
I'm looking into seeing how we can replace that laf partition that is broken. So we can fix this.
secret.animal said:
I'm looking into seeing how we can replace that laf partition that is broken. So we can fix this.
Click to expand...
Click to collapse
it sound like i'm in big problem right?
i'm total noob with this, sorry.
[email protected] said:
it sound like i'm in big problem right?
i'm total noob with this, sorry.
Click to expand...
Click to collapse
No problem, this is how we learn. One from the broken side and one from the fixing side. It's all good.
[email protected] said:
it sound like i'm in big problem right?
i'm total noob with this, sorry.
Click to expand...
Click to collapse
the only possible option is to flash the aboot.img and laf.img partitions. But we need to find a way to do so in your phone's current state. Things can be a lot easier if you could manage to get into fastboot mode.
tauheed90 said:
the only possible option is to flash the aboot.img and laf.img partitions. But we need to find a way to do so in your phone's current state. Things can be a lot easier if you could manage to get into fastboot mode.
Click to expand...
Click to collapse
Please help me out! i already bricked it for nearly 1 month already T_T
helo sir i am on window 7 i dont know how to edit modal number from hex can you please post a screen shots, i will be thanful to you plz sir help me otherwise my best will be just a plastic piece
i have wrongly flash lg g2 ls980 to d802 because the phone was refurbished
now phone is reboot and imei and baseband is unknown
so i am trying ur method but what do i have to edit in the hex editor
in flastool imei is getting shown but flash fails
please reply need urgent help
secret.animal said:
No problem, this is how we learn. One from the broken side and one from the fixing side. It's all good.
Click to expand...
Click to collapse
dear sir, i have lg d802 or d800, i dont know exactly bcoz seller sold me as d802.when i flashed stock kdz of d802 , its touch screen start weired behaviour, sometime stop reposnding or some thime i touch some thing else but some thing else selected.to check i opened the back of phone, its touch strips were written with d800 /801 and 803. but d800 was marked.so i flashed d800 tot file.after flashing phone boot but in boot loop.i can enter stock recovery to hard reset, but after that still boot loop.i can access download mode, but pc do not detect phone in download mode.when i power on in normal way than device manager shows modem and lg android net. but in download mode no detection.
what can i do in this situation? do this short capacitor method will work for me? or what else i can do to get it to life again,
plz waiting for response . it is same like attached pic of download mode in starting page of this thread
afzalcool said:
i have wrongly flash lg g2 ls980 to d802 because the phone was refurbished
now phone is reboot and imei and baseband is unknown
so i am trying ur method but what do i have to edit in the hex editor
in flastool imei is getting shown but flash fails
please reply need urgent help
Click to expand...
Click to collapse
majid.ayub999 said:
helo sir i am on window 7 i dont know how to edit modal number from hex can you please post a screen shots, i will be thanful to you plz sir help me otherwise my best will be just a plastic piece
Click to expand...
Click to collapse
You have to edit the first mention of the model number in the hex editor. Don't mess with anything else.
i was able to sole the problem.
have you found any solution?
[email protected] said:
its just stuck like the picture that i attached below . it won't go any future.
Can you help fix this?
or what can i do to fix it?
i got a LG G2 LS980
Click to expand...
Click to collapse
Have you found any solution to this problem?
I am the same problem as yours with another phone I have. It is a D800 which was wrongly flashed to D802. After flashing the D800 firmware with the model name edited, it is stuck on LG logo and it won't go to download mode either.
Not yet. I'm still waiting...total dead phone now.

Categories

Resources