Hello i have an Samsung Tab 3 GT-P5210 but it doesnt turn on anymore i tried all key combinations the only thing it responds is when i connect it to usb to my pc the it says in device manager cloverview plus device can someone help me revive the tablet the store told me it was a software problem
Call to samsung repair center 1800 266 8282 ask him for solution and be cool like me .
You may have to hit thanks if I am helped you.
Related
Can someone help me? I have brought on the Internet what I thought was a Samsung Omnia from China; on receipt of this phone I note that it states that it is a Samsung AnyCat. I have opened the back and It has SGH-i900 model written on the label under the battery. Unfortunately it has only got the basic software installed on it, and I am unable to gain connection to my PC to download anything as my PC which is a vista recognises it has a USB hard drive. Plus it did not come with owners manual. As you can tell by this request I am very new to this type of thing, so please give me some support with my basic understanding in mind.
I await your response
the samsungs normally come with a utility in the connections tab of settings called "usb connection" in there you can specify whether it connects as an activesync device or a usb hdd. I would not be suprised if the i900 had usb hdd as the default.
You cant miss the icon, it has a usb logo on it, (just in case the software is not in English)
Good luck.
also you might want to change your username to something that isnt quite so obviously your email address, might get picked up by spam bots otherwise.
Looking on the net a bit, it looks like what you actually have is a CECT I900. CECT make clones of branded phones, have a look on youtube. From what i can see it doesnt run on windows mobile.
Thank you very much for your response. The setting on this phone has not got a section allowing me to change this usb hdd as the default. The software is very basic I have tried everything i cant even turn off the horrible ring tone when it first powers up. This phone hasn't even got window mobile.
I will change my username
I have opened the back and It has SGH-i900 model written on the label under the battery, I will look on youtube shortly.
Thanks for your help, I looked on youtube and your right i have been had over big time.
what a nightmare, sorry to be the bearer of bad news. put it on ebay, someone will want it, probly gonna end up taking a big hit on it though.
Good luck.
hopefully we will see you back on here with your omnia
you sure will, i will have to now buy one from a main dealer, any advice on this. It needs to be sim free
Hi All,
My note 2 was fine and working with no serious issues until it fell from my pocket and the screen wouldn't show anything anymore. I took it to a repair shop and they said that the screen broke from the inside of the phone and that fixing it will cost a lot :crying:. My problem is that the phone has a pin lock but I can't interact with it to unlock it as the screen is pitch black and the touch doesn't work anymore. I need to backup my files but everywhere I looked seemed to have a solution for either rooted phones or phones with USB debugging being on and I have neither. Is there any way I can root or enable USB debugging with just my pc? or even unlock the pin code to access my files from the pc?
I've been looking for a solution for days now but with no luck . I hope there's hope. I'll appreciate any solution you guys might bless me with. Also, I just recently joined XDA so please excuse me if my question was placed in the wrong section
It will be quite cumbersome but you could buy an MHL adapter to get picture to HDMI and use an USB OTG cable for a keyboard and/or mouse and switch between them. This way you could enter the PIN code by a keyboard and install some apps to access it or as you said you could enable USB debugging and do stuff on your PC via ADB.
My Tab S 8.4 can not connect to the New Microsoft Display adapter yet my Galaxy S5 can and does so very well if I might add. Anyone else have the same problem or know how to fix this issue? I have already done all of the updates available for my Tab S which is what the manual said to do before I try and connect it to the display adapter and it will not connect. It only sits there and goes through a cycle of trying to connect and my TV screen going blank like it does right before it connects to my GS5 but it goes right back the connection screen from the beginning and does it again and again a few times and then my Tab S says connection error. It makes me so mad and I am thinking about returning it but I really like how it works on my phone I just really wanted it to connect to my Tab S. If anyone can help me figure this out I would be so very thankful!:good:
same thing
Having the exact same issue. Did you figure it out?
Hi Guys, I call for help because i'm out of solutions :
My OP3's screen is broken, I need to recover my data, I already tried Vysor, but the thing is that USB DEBUGING isn't allowed, and Vysor needs access...
So I bought an OTG cable to try to activate Usb deguging using a keyboard (blind activation method in a thread on Oneplus Forum)
But my issue is : My OP3 doesn't power my keyboard or any other OTG device ! I bought mine on amazon and it didn't worked, so I asked OnePlus to kindly send me one and they accepted, got it today (nice customer support) but it didn't worked either... So It means that It won't work untill I activate the OTG option in the settings... And with a broken screen and no OTG, I can't do that.... So am I screwed ?
Do you guys see anything else to try ?
Thanks !
Hi all, I have a problem with my redmi note 8 pro, so after connecting to the laptop, it does not detect it, there is only a message on the phone about the start of charging, I changed the USB configuration in the programming options but it did nothing, I checked various cables and other inputs and also no reaction.
Someone had such a problem and knows how to solve it? Thanks in advance for your help
szrat said:
Hi all, I have a problem with my redmi note 8 pro, so after connecting to the laptop, it does not detect it, there is only a message on the phone about the start of charging, I changed the USB configuration in the programming options but it did nothing, I checked various cables and other inputs and also no reaction.
Someone had such a problem and knows how to solve it? Thanks in advance for your help
Click to expand...
Click to collapse
Might be a silly question, but have you tried connecting your phone on another laptop or PC?
Also - Windows or Linux?
Unfortunately, this is not possible
okubax said:
Might be a silly question, but have you tried connecting your phone on another laptop or PC?
Also - Windows or Linux?
Click to expand...
Click to collapse
Yes i have tried with other pc and laptop and it's connecting perfectly. Although other laptops and pc has intel processor.
My laptop has AMD Ryzen 5 3500U and my device is running on Windows 10