Develop Bugs

Viper4Android & Other Audio Mods

Hi
I was wondering if other OP3 Owners tried installing audio mods such as Viper4Android and MaxxAudio?
I faced bugs with Viper4Android, SE was on permissive but it wasnt processing audio.

varunmehra5 said:
Hi
I was wondering if other OP3 Owners tried installing audio mods such as Viper4Android and MaxxAudio?
I faced bugs with Viper4Android, SE was on permissive but it wasnt processing audio.
Click to expand...
Click to collapse
Look into how to remove the deep buffer from audiopolicy.
Then v4a should work fine.
I don't have my device yet so can't confirm but this is usually all that is needed
Sent from my Nexus 5 using Tapatalk

Alex240188 said:
Look into how to remove the deep buffer from audiopolicy.
Then v4a should work fine.
I don't have my device yet so can't confirm but this is usually all that is needed
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Managed to run it using Viper-Fixer App, Viper4Android and XtremeMusic Mod confirmed working. Huge improvement in sound

varunmehra5 said:
Managed to run it using Viper-Fixer App, Viper4Android and XtremeMusic Mod confirmed working. Huge improvement in sound
Click to expand...
Click to collapse
So you are able to use it? When I installed the app the phone went into bootloop [emoji19] [emoji19] [emoji19] can yor share the steps&files,please...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

hunhool said:
So you are able to use it? When I installed the app the phone went into bootloop [emoji19] [emoji19] [emoji19] can yor share the steps&files,please...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, First of take Nandroid Backup
2. Download Xtreme Music Mod from XDA Android Thread
3. Download Viper4Android Latest APK not the Flashable zip
4. Set SE Mode to permissive
5. Download Viper Fix apk
6. Flash XtremeMusicMod zip
7. Install Viperfix and click on apply fix
8. Install Viper4android apk, Install Drivers and Reboot

varunmehra5 said:
Yes, First of take Nandroid Backup
2. Download Xtreme Music Mod from XDA Android Thread
3. Download Viper4Android Latest APK not the Flashable zip
4. Set SE Mode to permissive
5. Download Viper Fix apk
6. Flash XtremeMusicMod zip
7. Install Viperfix and click on apply fix
8. Install Viper4android apk, Install Drivers and Reboot
Click to expand...
Click to collapse
Thanks for the instructions. V4A been installed, however it doesn't seems to work. I need to choose fx compatible mod to get it work.
Update : it's ok now [emoji41] [emoji1]
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

varunmehra5 said:
Yes, First of take Nandroid Backup
2. Download Xtreme Music Mod from XDA Android Thread
3. Download Viper4Android Latest APK not the Flashable zip
4. Set SE Mode to permissive
5. Download Viper Fix apk
6. Flash XtremeMusicMod zip
7. Install Viperfix and click on apply fix
8. Install Viper4android apk, Install Drivers and Reboot
Click to expand...
Click to collapse
Can we uninstall XtremeMusic AudioFX without it messing up V4A? Dont really want another app thats not being used on my app drawer.

I'll be making a flashable zip once I get the device which will allow you to run viper with enforcing se policy mode.
Can anyone link to this viperfix apk.
Does it simply modify the audio policy?
Sent from my Nexus 5 using Tapatalk

There is no need of all these things. Just flash the DivineBeats zip and you're good to go.
Tested and working fine.

edios123 said:
There is no need of all these things. Just flash the DivineBeats zip and you're good to go.
Tested and working fine.
Click to expand...
Click to collapse
Link?

edios123 said:
There is no need of all these things. Just flash the DivineBeats zip and you're good to go.
Tested and working fine.
Click to expand...
Click to collapse
Which version did you flash?

I want a stereo speaker mod

Edios, did you test yourself whether DivineBeats works on the OP3? On stock ROM?

varunmehra5 said:
Yes, First of take Nandroid Backup
2. Download Xtreme Music Mod from XDA Android Thread
3. Download Viper4Android Latest APK not the Flashable zip
4. Set SE Mode to permissive
5. Download Viper Fix apk
6. Flash XtremeMusicMod zip
7. Install Viperfix and click on apply fix
8. Install Viper4android apk, Install Drivers and Reboot
Click to expand...
Click to collapse
Thanks for this, I was just wondering to myself today how to do this.
I assume root is required?
---------- Post added at 01:33 AM ---------- Previous post was at 01:27 AM ----------
edios123 said:
There is no need of all these things. Just flash the DivineBeats zip and you're good to go.
Tested and working fine.
Click to expand...
Click to collapse
Yeah, I would be interested in a link to this, too.

Yes, I've tested and it works.
Been using this since I had a 6P.
Flash this:
https://www.androidfilehost.com/?fid=24591020540822247

daneoleary said:
I assume root is required?
Click to expand...
Click to collapse
Yeah, unlocked bootloader, custom recovery and root are required for pretty much any modifications. Can't modify system files without root, can't flash ZIPs without custom recovery, can't get custom recovery without unlocked bootloader.
Also it's advised to make a nandroid backup before you start messing with the device which again requires stuff mentioned above.
If you're not yet rooted, there's a good guide on this forum; just follow it by the letter and everything will be fine. Just a heads-up: unlocking bootloader will wipe your device (factory reset) so be prepared to spend some time setting it up again ...

I think it's important to link the source.

Explorer23 said:
Yeah, unlocked bootloader, custom recovery and root are required for pretty much any modifications. Can't modify system files without root, can't flash ZIPs without custom recovery, can't get custom recovery without unlocked bootloader.
Also it's advised to make a nandroid backup before you start messing with the device which again requires stuff mentioned above.
If you're not yet rooted, there's a good guide on this forum; just follow it by the letter and everything will be fine. Just a heads-up: unlocking bootloader will wipe your device (factory reset) so be prepared to spend some time setting it up again ...
Click to expand...
Click to collapse
I'm not sure if I want to root or not, but if I do it definitely wouldn't be until some of the ROMs start supporting Dash charge.

ATTENTION!
Flashing "DivineBeats" is not as simple and safe as Edios suggests.
On my device, I get a bootloop, i.e. the device boots up to the launcher, I can do something for a few seconds, then the device reboots.
Same thing as when I flashed Viper4Android.
Perhaps it's just an incompatibility with Xposed, who knows; but for now, these sound mods are unfortunately not usable by me...

edios123 said:
Yes, I've tested and it works.
Been using this since I had a 6P.
Flash this:
https://www.androidfilehost.com/?fid=24591020540822247
Click to expand...
Click to collapse
before i flash this, did you flash on oxygen OS or CM?
---------- Post added at 10:59 AM ---------- Previous post was at 10:47 AM ----------
varunmehra5 said:
Yes, First of take Nandroid Backup
2. Download Xtreme Music Mod from XDA Android Thread
3. Download Viper4Android Latest APK not the Flashable zip
4. Set SE Mode to permissive
5. Download Viper Fix apk
6. Flash XtremeMusicMod zip
7. Install Viperfix and click on apply fix
8. Install Viper4android apk, Install Drivers and Reboot
Click to expand...
Click to collapse
same question here: is this CM or OxygenOS? I tried divinebeats in oxygen and as reported, i get a bootloop. Will have to assume this will result in a bootloop on Oxygen too.

How do you install viper4android?

I had a S6, and with every custom rom, I just installed the apk, installed the driver, rebooted and there, it worked.
But with this phone every custom rom I try doesn't seem to install the driver, instead it asks to install the driver again.
I have changed the kernel SELinux setting and I get the same error? Has anyone got viper to work and on what rom??

Rekan_ said:
I had a S6, and with every custom rom, I just installed the apk, installed the driver, rebooted and there, it worked.
But with this phone every custom rom I try doesn't seem to install the driver, instead it asks to install the driver again.
I have changed the kernel SELinux setting and I get the same error? Has anyone got viper to work and on what rom??
Click to expand...
Click to collapse
I am stock, rooted on the latest Marshmallow build and have flashed the attached file through TWRP with great success. Drivers loaded just fine and audio quality is awesome.
Good luck!

I use Viper atmos sony and beats edition and it works well. I'm using Chroma and ElementalX.
You can try with the flashable zip here http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137

Installing Viper4Android

After days of trying numerous different ways I've finally managed to get Viper to work my Oneplus 7T Pro
You will need to have a modded recovery with adb enabled:-
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
First I removed the any previous Viper module in Magisk and rebooted.
I then uninstalled the Viper App and rebooted again.
So I then had a clean starting point.
I installed The SELinux Switch app from XDA to set SELinux mode to Permissive:-
https://forum.xda-developers.com/and...witch-t3656502
I turned off Google Play Protect.
I then installed the version 2.7.1.0 module in Magisk.
Installed driver and it rebooted.
Stuck at Fastboot screen.
Reboot to Recovery
I then did the following in adb to delete the post-fs-data.sh file which is the file that stops the phone booting.
1) adb shell
2)cd to /data/adb/modules/ViPER4AndroidFX
3)rm post-fs-data.sh
4)exit
reboot to Fastboot and then Start
Then it just worked.
Hopefully this method will work for others.

Sounds cool. Congratulations

Wrong thread!

Legend!!!

Wouldn't it be easier to just make a viper zip without postfs data?

f41lbl0g said:
Wouldn't it be easier to just make a viper zip without postfs data?
Click to expand...
Click to collapse
I don't know how to do that.
That would be a question for the people who write Viper.

f41lbl0g said:
Wouldn't it be easier to just make a viper zip without postfs data?
Click to expand...
Click to collapse
We don't have the source of the module, and you can't just take the installed module folder and zip it to a module so I don't think it's possible.
Might be wrong though.
Sent from my OnePlus7TPro using XDA Labs

thanks mate. worked for me too. finally
Edit: it is not processing on Bluetooth devices

Here try this zip I modified, it should work fine on the OP7T and OP7T Pro if this fix does indeed work. Shouldn't need any custom recovery or adb. Can someone report if my modified file works? If it doesn't just use the custom recovery with adb to remove the module.
Note: Selinux will need to be changed to permissive before installing the module using this:
https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
All credits to:
- @ahrion
- @zhuhang
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt

f41lbl0g said:
Here try this zip I modified, it should work fine on the OP7T and OP7T Pro if this fix does indeed work. Shouldn't need any custom recovery or adb. Can someone report if my modified file works? If it doesn't just use the custom recovery with adb to remove the module.
Note: Selinux will need to be changed to permissive before installing the module using this:
https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
All credits to:
- @ahrion
- @zhuhang
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
Click to expand...
Click to collapse
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
Did you make selinux permissive?

f41lbl0g said:
Did you make selinux permissive?
Click to expand...
Click to collapse
Yes i turned the selinux permissive from the beginning. I haven't mentioned that because I forgot it by mistake

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
I had the same. I had to install and delete the .sh twice until it worked. And it works fine.

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
c0caine_train said:
I had the same. I had to install and delete the .sh twice until it worked. And it works fine.
Click to expand...
Click to collapse
At this point just flash the zip from the original post, don't use my zip. I'll test it out more once my phone arrives.

Do you need to keep selinux permissive to continue to use Viper due to deletion of the .sh? Or can one toggle it back post this process?

Wow, this Viper4android seems to be a pain for our phones. I already tried it approximately 5 times and having to use the MSM tool to be able to boot up again from scratch I'm coming from a different flagship and I never had a problem rooting and installing apps like Viper4android before. I don't know if it would be too much to ask. that once someone has found a proven successful method to please share. I don't want to seem lazy I've been searching all over and so far the methods are not definite and very frustrating. Ive had my phone for a week still adjusting. Anyway any help would be appreciated and please no offensive comments. Thanks

slapman said:
Wow, this Viper4android seems to be a pain for our phones. I already tried it approximately 5 times and having to use the MSM tool to be able to boot up again from scratch I'm coming from a different flagship and I never had a problem rooting and installing apps like Viper4android before. I don't know if it would be too much to ask. that once someone has found a proven successful method to please share. I don't want to seem lazy I've been searching all over and so far the methods are not definite and very frustrating. Ive had my phone for a week still adjusting. Anyway any help would be appreciated and please no offensive comments. Thanks
Click to expand...
Click to collapse
Yeah, read the first post...
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
Yeah, read the first post...
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Yes, I did read the post but I just don't want to mess up the phone again. Maybe Ill try again when my mind is fresh had to many mishaps but thanks.

slapman said:
Yes, I did read the post but I just don't want to mess up the phone again. Maybe Ill try again when my mind is fresh had to many mishaps but thanks.
Click to expand...
Click to collapse
Which version do you have? EU or international?
This recovery works fine in EU version, if there's is anything that messes up it's likely a module, which can easily be removed with the modded recovery.
Sent from my OnePlus7TPro using XDA Labs

When I try to cd to /data/adb/modules/ViPER4AndroidFX I get cd: bad substitution
I'm on OOS 10.0.4 (international ver.) with modified recovery for ADB.

Question V4A working yet?

Has anyone gotten viper4android to work on 9pro global yet? I've tried several versions with no luck.

Yes, you just need to install the "Ainur Narsil" and "Audio Mod Library" modules in magisk first. Reboot, then install viper. Good luck!

hllywd said:
Has anyone gotten viper4android to work on 9pro global yet? I've tried several versions with no luck.
Click to expand...
Click to collapse
There is a thread in here in reference to this very topic. You have to install more than just Viper to get the drivers to install. The thread I referred to says to install JamesDSP, reboot, install the DeWitt version on the Viper app (2.7.2.1 I think) it'll prompt you to install the drivers, reboot and done. I had mixed results with this method, sometimes the processing would just stop, start, stop....
I install AML v4.0 first, install Ainur Sauron, reboot, install Viper apk, the drivers, reboot, Dolby Digital Plus reboot and done. You can remove the Ainur Sauron module after all that if your so inclined, the Dolby Digital Plus isn't necessary either but it all works flawlessly.

Install in order
Viper4androidFX via Magisk
Reboot
Audio Modification Library via magisk
Reboot
Push the file (extract from the zip) to data/adb/modules/ViPER4Android/ that i have uploaded and set permission 644
(it should now be data/adb/modules/ViPER4Android/post-fs-data.sh)
Reboot
Open viper, set to legacy mode, then check if status is now normal
Amazingly this has been working on all my phones with A11

This is the process that worked for me:
Uninstall any previous versions of Viper and other audio mods
Install SELinuxModeChanger or use another method to change your SELinux to permissive
Install Audio Modification Library from Magisk > Reboot
Install Audio Compatibility Patch from Magisk > Reboot
Install Viper4Android 2.7.2.1 from Magisk > DONT REBOOT
Open the newly installed Viper app and download the drivers > Reboot
Open Viper and hit the Settings in the top right
Turn on Legacy Mode
Good Luck

stryver said:
Yes, you just need to install the "Ainur Narsil" and "Audio Mod Library" modules in magisk first. Reboot, then install viper. Good luck!
Click to expand...
Click to collapse
This worked for me! I had to disable AML, reboot, re-enable, reboot as additional steps but got it working at the end of the day. Thank you a ton for this, I've been trying to get V4A to work ever since I got this phone. JamesDSP works and has been fine but I much prefer the UI of V4A.
Seems like the EQ isn't doing anything but the master limiter seems to increase the overall volume so that's a good sign.
Thanks again!

How about full dolby atmos (not talking about dolby digital Plus). Has somebody managed to get it work finally ?

Is it possible to install V4A with SELinux enforcing?

ahh123 said:
Is it possible to install V4A with SELinux enforcing?
Click to expand...
Click to collapse
Pretty sure you need it set to permissive to install but then you can reset it back to enforcing after install is complete. That's what I did anyway

ahh123 said:
Is it possible to install V4A with SELinux enforcing?
Click to expand...
Click to collapse
Yep. It certainly is. A lot of what people are recommending to do are extraneous and unnecessary.

stryver said:
Yes, you just need to install the "Ainur Narsil" and "Audio Mod Library" modules in magisk first. Reboot, then install viper. Good luck!
Click to expand...
Click to collapse
This one worked for me thanks

HessNL said:
This one worked for me thanks
Click to expand...
Click to collapse
Would you be so kind and post a link what version on v4a did you install?
One more question z before I screw up something
To install v4a:
1. Install Ainur Narsil in magisk,
2. reboot.
3. Install Audio Mod Library
3. Reboot
4. Install v4a
is it correct?

bamemanxxa3416 said:
This is the process that worked for me:
Uninstall any previous versions of Viper and other audio mods
Install SELinuxModeChanger or use another method to change your SELinux to permissive
Install Audio Modification Library from Magisk > Reboot
Install Audio Compatibility Patch from Magisk > Reboot
Install Viper4Android 2.7.2.1 from Magisk > DONT REBOOT
Open the newly installed Viper app and download the drivers > Reboot
Open Viper and hit the Settings in the top right
Turn on Legacy Mode
Good Luck
Click to expand...
Click to collapse
How I did it but still needed to modify the data/adb/modules/ViPER4Android/post-fs-data.sh upon subsequent tries after removing magisk and reinstalling.

stryver said:
Yes, you just need to install the "Ainur Narsil" and "Audio Mod Library" modules in magisk first. Reboot, then install viper. Good luck!
Click to expand...
Click to collapse
Thx, working perfect thanks to your info

Flying Fox said:
Thx, working perfect thanks to your info
Click to expand...
Click to collapse
Nada... Can't make it to work.
Installed everything in your post. Need help guys.

netgar said:
Nada... Can't make it to work.
Installed everything in your post. Need help guys.
Click to expand...
Click to collapse
Switch to legacy mode in settings

Flying Fox said:
Switch to legacy mode in settings
Click to expand...
Click to collapse
Ok, made it work.
Thank you
Now I have another problem.
For some reason v4a doesn't see my presets in viper4android.
Any suggestions?

netgar said:
Ok, made it work.
Thank you
Now I have another problem.
For some reason v4a doesn't see my presets in viper4android.
Any suggestions?
Click to expand...
Click to collapse
Anyone was able to run presets ?
For some reason my v4a can not see
presets
I copied presets to android/data folder and nothing. I noticed that v4a is not detecting my presets folders. Tried everything.

netgar said:
Anyone was able to run presets ?
For some reason my v4a can not see
presets
I copied presets to android/data folder and nothing. I noticed that v4a is not detecting my presets folders. Tried everything.
Click to expand...
Click to collapse
I have the same issue. Looks like viper has no permission to read data in the folder.

DeanR97 said:
I have the same issue. Looks like viper has no permission to read data in the folder.
Click to expand...
Click to collapse
Yeap.... I have the same problem. V4a just doesn't see presets folders at all.
Hopefully someone smart will figure it out what is wrong.

Question Viper4android on any android 12 custom rom

i've been trying for 2 whole days now to install viper4android on my oneplus 9 pro, i just can't get it to install. I'm basically stuck in an install loop and i've tried almost everything (permissive, AML, clean install, v4a repackaged, android 12 fix) but none of them work.
I wonder if anyone got viper working on their device running a custom android 12 rom

Take a look:
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com

Hammerhand.17 said:
Take a look:
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com
Click to expand...
Click to collapse
tried that too and just now tried it on just stock lineage os on A11 but still no luck nstalling v4a

This method worked for me in several custom ROMs in A12 and A12, bit just following the steps exactly and rebooting in every step (and you have to activate legacy mode).

Hammerhand.17 said:
This method worked for me in several custom ROMs in A12 and A12, bit just following the steps exactly and rebooting in every step (and you have to activate legacy mode).
Click to expand...
Click to collapse
i did follow every step with the reboots after each module but i'm still stuck in an install loop so i cant even get to the settings unfortunately... i've never had so much trouble with a device

Uninstall all the modules, try the procedure again with these files. I tried with other and got driver loop as you did, but it worked with these.

Hammerhand.17 said:
Uninstall all the modules, try the procedure again with these files. I tried with other and got driver loop as you did, but it worked with these.
Click to expand...
Click to collapse
Awesome, i'll try as soon as a custom rom is up and running

Hammerhand.17 said:
Uninstall all the modules, try the procedure again with these files. I tried with other and got driver loop as you did, but it worked with these.
Click to expand...
Click to collapse
So install magisk, reboot, AML, reboot, JamesDSP, reboot, V4A, install drivers and let it reboot? kernel can stay in enforcing?

After last reboot, you have to substitute the fs file as stated in the other thread, reboot again and set legacy mode.
I am in enforced kernel, yes.

Hammerhand.17 said:
After last reboot, you have to substitute the fs file as stated in the other thread, reboot again and set legacy mode.
I am in enforced kernel, yes.
Click to expand...
Click to collapse
Got it working finally!! Could you supply me with the modification i need to make in the post fs file? So i follow you exactly? Also can i remive jamesdsp now or does it need to stay installed?

You have to replace this file in /data/adb/modules/Viper4AndroidFX and reboot. About JamesDSP I don't really use it so I disabled the app, although I have to do it in every reboot

Hammerhand.17 said:
You have to replace this file in /data/adb/modules/Viper4AndroidFX and reboot. About JamesDSP I don't really use it so I disabled the app, although I have to do it in every reboot
Click to expand...
Click to collapse
But can i remive jamesdsp from magisk or does it need to be installed in order to keep viper working? Like the moment you remove it viper just stops working?

Don't know, never tried. If you try, tell me, but I didn't want to do more tests.

Hammerhand.17 said:
Don't know, never tried. If you try, tell me, but I didn't want to do more tests.
Click to expand...
Click to collapse
If you uninstall it viper is once again stuck in an install loop so you do need jamesdsp to stay installed

Ok. Good to know. Will left it installed, then.