Related
Hello,
I found a DiskOnChip TrueFFS utilities package.
version 6.3.2.12 Release
-----------------------
1. Supports the following DiskOnChip Products:
- DiskOnChip G3/P3 family
- DiskOnChip G3/P3 LP family
- DiskOnChip H1 family
- DiskOnChip G4 family
2. This Package includes the TrueFFS Utilities Package for DiskOnChip.
- DOCSHELL version 6.3.2.12
- DFORMAT version 6.3.2.10
- DFS version 6.3.2.10
- DINFO version 6.3.2.10
- DIMAGE version 6.3.2.11
- SPLITIMGAE version 6.3.2.9
I wonder if this can help you to develop an utility to CID-unlock a HTC p3300 ? Pof,dutty, mun_rus....
Need TrueFFS package in LINUX
Hai,
please help me, I need a TrueFFS package for writing a device driver code for flash IC (MD8832-D1G-V18-X-P)
wtih regards,
karthik
Hello guys...
Here is my long awaited DZ file creator.
This one is coded in asm with a custom zlib static lib integrated and MD5 hash (from Roy/Fleur).
Hope it will be usefull for any (source code will be available in final release).
Bugs reports and suggestions are welcome...
CUL8R...
Voici mon très attendu créateur de fichier DZ.
Celui-ci est codé en assembleur avec une dll statique zLib personnalisée intégrée et la fonction de hash MD5 (basée sur celle de Roy/Fleur).
J'espère qu'il sera utile à quelqu'un (le code source en masm sera mis à disposition en version finale).
Tous les reports de bugs et suggestions sont les bienvenues...
Laurent aka BIGBOSS from COPS...
History
01 Mar 2013 - Latest sources provided
- As promised, here are sources for DZCreator v1.0c.
17 Sep 2012 - No more support
- I'm sorry to inform you that my good OLD KS20 died, so i'm now unable to continue these projects (DzDecrypter and DzCreator).
04 Apr 2010 - DzCreate.ini update
- Added GW620/GW620R support / Ajout support du GW620/GW620R
29 Mar 2010 - Version 1.0c (alpha release)
- Some improvements / Quelques améliorations
- Perhaps last version 1.0x without sources / Peut-être la dernière version 1.0x sans les sources
24 Mar 2010 - Version 1.0b (alpha release)
- Many improvements / Nombreuses améliorations
- Partial code rewrite / Réécriture partielle du code
- Splitting corrected if more than 10 part / Split corrigé si plus de 10 parties.
- Allocated memory is now in in" file. / La mémoire allouée se trouve maintenant dans le fichier ini.
- Alternate path for "FLASH.BIN" is now working again. / Le chemin alternatif pour le fichier "FLASH.BIN" est a nouveau fonctionnel.
- No more packed with PE-Crypt32. / N'est plus compressé par PE-Crypt32.
19 Mar 2010 - Version 1.0a1 (alpha release)
- Many improvements / Nombreuses améliorations
- Partial code rewrite / Réécriture partielle du code
- Splitting support / Support du split
- Supports actually BL40, GM730, GM730e, GM750, GW820, KE990, KE990c, KS10, KS20, KU990, KU990GO, KU990MF, KU990R and U990. / Supporte actuellement BL40, GM730, GM730e, GM750, GW820, KE990, KE990c, KS10, KS20, KU990, KU990GO, KU990MF, KU990R et U990.
- Tested on Windows XP SP3 / Testé sur Windows XP SP3
04 Jan 2010 - Version 0.05
- Added support for GM730 / Ajout support du GM730 -> Thanks Yod123 for DZ-file.
- Added support for KF690 / Ajout support du KF690 -> Thanks Homero2 for DZ-file.
- Support GM730AT (use -mGM730) / Support du GM730AT (utiliser -mGM730)
- Support KF690AT (use -mKF690) / Support du KF690AT (utiliser -mKF690)
22 Dec 2009 - Version 0.04
- Added support for GM750 / Ajout support du GM750 -> Thanks homero2 for DZ-file.
- Added support for KE990 / Ajout support du KE990
- Added support for KE990C / Ajout support du KE990C
- Added support for KF700 / Ajout support du KF700
- Added support for KU990GO / Ajout support du KU990GO -> Thanks jay_t69 for DZ-file.
- Added support for KU990MF / Ajout support du KU990MF -> Thanks jay_t69 for DZ-file.
- Support KE990AT (use -mKE990) / Support du KE990AT (utiliser -mKE990)
- Fixed a little filename's bug in main header if "-v" specified / Correction d'un petit bug du nom de fichier dans l'entête si "-v" spécifié
- Soon available BL40 if sure that files greater than 160Mo are splitted.
14 May 2009 - Version 0.03
- Added support for KF390 / Ajout support du KF390
- Added support for KU990i / Ajout support du KU990i -> Thanks ceckin for DZ-file.
- Added support for KU990R / Ajout support du KU990R
- Support KC910AT (use -mKC910) / Support du KC910AT (utiliser -mKC910) -> Thanks ceckin for DZ-file.
- Preliminary support for U990 / Support preliminaire du U990
- Check if SubFile type 0x00F have constant filename (always LG_SSIKYU_Flex.fbn?)
- Different "flash.bin" path parameter (Spocky12's suggestion) / Paramètre pour emplacement différent du "flash.bin" (Suggestion de Spocky)
- Sources provided in zip file / Sources fournis dans le fichier ZIP
04 May 2009 - Version 0.02
- Added support for KC910 (Renoir) / Ajout support du KC910 (Renoir)
- Added support for KS10 / Ajout support du KS10
- Added support for KU990 (Viewty) / Ajout support du KU990 (Viewty)
- CT810 functionnality confirmed by philrocksgca / Fonctionnalité CT810 confirmée par philrocksgca
- KS20 functionnality confirmed by spocky12 / Fonctionnalité KS20 confirmée par spocky12
- Version parameter is now optional (Spocky12's suggestion) / Paramètre version optionnel (Suggestion de Spocky12)
- ".dz" file extension is now optional / L'extension ".dz" du fichier est maintenant optionnelle
- Updated core for variable filenames (KU990) / Code modifié pour les noms de fichiers "variables" (KU990)
- Minor updates / Modifications mineures
- Perhaps last version without sources provided (if enough members are interested in asm sources).
29 Apr 2009 - Version 0.01
- Initial release / Version initiale
- Supports only KS20, CT810 / Supporte seulement KS20, CT810
Status / WIP
Version 1.0b status
- GM730: Reported functionnality by derspy.
- KS20: Reported functionnality by me.
Remaining
- If you've got any idea, bug report or anything else: Please report...
- Looking for DZ of other models (give me links...)
Misc
- Any donation welcome...
Merci pour le logiciel
Un outil de plus !
Merci Copsfrance
One more tool!
thank you Copsfrance
For some strange reason, I can't seem to get this to work. I've tried several different ways of entering the parameters but to no avail. It just keeps listing the usage info.
@teoami:
Ok, sorry for short explanation in the program (May help message could he improved).
Here is an usage sample:
For Incite/CT810:
DZCreate -mCT810 -vVersion_Description filename.dz path_of_subfiles
For KS20:
DZCreate -mKS20 -vVersion_Description filename.dz path_of_subfiles
Version_Description contains version description (not only version number).
Since version 0.02, the "-v" argument is optional.
filename.dz is the dz-file to create (with ".dz" extension).
Since version 0.03, the ".dz" extension is optional.
path_of_subfiles is the path (without ending backslash) containing subfiles..
Laurent aka BIGBOSS from COPS...
Ok, I was able to get it to work. I had to put the dzcreator in the same directory as the sub files.
Thanks copsfrance, great job.
WIP on version 0.02
Work in progress
- 2009/04/29 : Added support for KS10 (MSM6275)
Now, all WIP will be placed in first post.
Laurent aka BIGBOSS from COPS...
I am going to have to give you a virtual pat in the back *pat *pat* and I am also wondering if any of you will be able to upload a rom dump to some website ( I think Teoami said in the biginning of the forums that he has a valid rom dump which he made and now that he has a dz file, can u pleeeeese pm it to me or just post it to the official website (You'll be the best person ever aside from copsfrance if you do so).
no source code yet? i was hoping to try to add a GUI to it just for funn
@rkrishnan2012:
Sorry, can't give you any dump, because i don't own an Incite (seems not distributed in France).
Try to contact Teoami if he can provide it to you.
@philrocksgca:
Don't care, the source will be provided soon (perhaps with version 0.03).
This version 0.01 is actually *alpha* and seems working on KS20 (Spocky has made some tests, and it seems working).
I think it should work on CT810 because it uses same chipset in DZ-header and subfilenames as the KS20.
Unlike my previous tool DZDecrypt, i haven't released a GUI version because rom kitchen mainly uses command-line tools.
Laurent aka BIGBOSS from COPS...
all right, that makes sense. i have confirmed it working with the CT810 btw
Way to go, waiting for more phone support, anyway great job with mastering the DZ structure and GUI its not essential it have only 2 arguments.
@ceckin:
Thanks for greating me!
In the next version, i'm planning to include another parameter on commandline.
As suggested by Spocky, his kitchen stored customized "flash.bin" file in a different path than the other subfiles. So, i may include a new optional parameter for a possible different path for "flash.bin" file only.
I'm already working on version 0.02.
This new version has already supports for KS10 and KU990.
The hardest work was for KU990 because media and module filenames have "variable" subfilenames, so, i have to update the main engine.
The method used will be explained later.
Laurent aka BIGBOSS from COPS...
version 0.02 is out.
Yohoo hords of fans...
The version 0.02 of DzCreator if available.
Now, supports CT810 (Incite), KC910 (Renoir), KS10, KS20 and KU990 (Viewty).
See the first post for details and download.
Reports any bugs and suggestions...
Sources should be provided in next release (if there's a next release)...
Laurent aka BIGBOSS from COPS...
I'm looking for other dz-files !
I'm looking for DZ-files of other models...
If someone can give me some links, for compatibility with upcoming version 0.03...
Remember that sources will be available with version 0.03.
Thanks in advance...
Laurent aka BIGBOSS from COPs...
Version 0.03 is out... ** With Sources **
The version v0.03 is out.
Major information: Sources are provided from now...
See first post here for details and download.
Reports any bugs and suggestions...
Laurent aka BIGBOSS from COPS...
copsfrance said:
Hello guys...
Status / WIP
Remaining
- Looking for DZ of other models (give me links...)
Click to expand...
Click to collapse
Hi I have u990.dz (H3G Branded viewty) get them HERE! These are different to KU990.dz as there is a model number change.
I hope these help. I also have dz for KU990MF,KU990GO and a master rom for U990. If any of this is of interest to you just let me know.
jay_t69 said:
Hi I have u990.dz (H3G Branded viewty) get them HERE! These are different to KU990.dz as there is a model number change.
I hope these help. I also have dz for KU990MF,KU990GO and a master rom for U990. If any of this is of interest to you just let me know.
Click to expand...
Click to collapse
In version 0.03, support for U990 has already been added with some firmwares from this website. I just want to be sure that filetype 0x10h is always named "LG_SSIKYU_Flex.fbn".
If you can send me links for KU990MF and KU990GO, i'm interested.
Thanks...
Laurent aka BIGBOSS from COPs...
WIP in version 0.04
Work in progress
- 2009/05/24 : Added support for KU990GO / Ajout support du KU990GO. (Thanx jay_t69)
- 2009/05/24 : Added support for KU990MF / Ajout support du KU990MF. (Thanx jay_t69)
- 2009/05/20 : Added support for KF700 / Ajout support du KF700.
- Waiting for other DZs
I'm also actually working on a tool to reconstruct "flash.bin" with resizing dynamically partitions size (in order to recover memory/space with cooking).
I can't give you any date actually for this new coming tool (will require many tests and time...)
Laurent aka BIGBOSS from COPS...
WIP in version 0.04
Work in progress
- 2009/05/26 : Added support for KE990 / Ajout support du KE990.
- 2009/05/26 : Added support for KE990c / Ajout support du KE990c.
- 2009/05/26 : Support for KE990AT (use model -mKE990) / Support du KE990AT (specifier modèle -mKE990)
Version 0.04 is coming soon...
Due to my actual work on a tool to reconstruct "flash.bin" with dynamically partitions resizing (in order to recover memory in cooking), versions that follow v0.04 will take a longer time.
Laurent aka BIGBOSS from COPS...
Few facts about this version:
INTERNAL release (not official, obviously)
Version: 2.1 Eclair
PDA version I9000XWJM9
PDA Build time: 2010.09.06 15:53:48 KST
PDA Changelog: Unknown
MODEM version I9000XXJM4
MODEM Build time: 2010.08.31 10:26:45 KST
MODEM Changelog: Unknown
The modem firmware has been updated from I9000XXJM3 used in my previous releases to I9000XXJM4 (final). This version should have some actual changes too (besides fixed typos in operator names).
All CSC versions are I9000???JM1 and unbranded, but CSC´s for specific operators (Vodafone for example) are included.
UI / Swype languages supported by XWJM9:
UI: Czech, Danish, Deutsch DACH , Dutch, English, Estonian, Finnish, French, Greek, Hungarian, Icelandic, Irish, Italian, Kazakh, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovakian, Spanish, Swedish, Turkish, Ukrainian
Swype: Croatian, Czech, Danish, Deutsch DACH ,Dutch, English, Finnish, French, Greek, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM.7z
CSC_I9000?????? (CSC of your selection)
I know this is not nearly all of the excisting variants, but repacking the softwares is quite a slow process for certain reasons. I have access to pretty much any Samsung firmware, so if you find a variant missing you can send me pm. I can have a look.
Download links:
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM.7z
CSC_I9000DBTJM1 - Generic Germany (Unbranded, PCODE DBT)
CSC_I9000OXAJM1 - Generic Europe Multi-CSC (Unbranded, PCODE(s) CPW, DBT, ITV, KOR, XEF, XEO, XEU)
CSC_I9000OXEJM1 - Baltic, Kazakhstan, Russia, Ukraine Multi-CSC (Unbranded, PCODE(s) SEB, SEK, SER, SKZ)
CSC_I9000OXXJM4 - Europe - Africa Multi-CSC (Unbranded, PCODE(s) ATO, AUT, CNX, COA, COS, CRO, CYO, CYV, EUR, HAT, IRD, KOR, MET, MOT, MOZ, MSR, MTL, O2C, O2I, ONE, ORO, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM
CSC_I9000BMCJH2 - Bell Canada (Branded, PCODE BMC)
CSC_I9000HUIHUI - Tre H3G Italy (Branded, PCODE HUI)
CSC_I9000OLBJG4 - Asian Multi-CSC (Unbranded, PCODE(s) CCM, DGI, GLB, MIS, MM1, SIN, SMA, STH, THL, UMB, XEV, XME, XSE, XSO, XSP, XTC, XTE, XXV)
CSC_I9000OPSJG1 - Optus Australia (Unbranded, PCODE OPS)
CSC_I9000XEEJM1 - Generic Nordic (Unbranded, PCODE XEE)
CSC_I9000TMNJM1 - TMN Portugal (Branded, PCODE TMN)
CSC_I9000TMNJM1-CLEAN-v2 - TMN Portugal (Custom, PCODE TMN)
CSC_I9000XECJM1 - Generic Spain (Unbranded, PCODE XEC)
CSC_I9000PANJM1 - Telenor Hungary (Branded, PCODE PAN)
CSC_I9000PRTJM2 - Play Poland (Branded, PCODE PRT)
CSC_I9000SWCJM1 - Swisscom Switzerland (Branded, PCODE SWC)
CSC_I9000TENJM2 - Telenor Norway (Unbranded, PCODE TEN)
CSC_I9000TIMJM2 - TIM Italy (Branded, PCODE TIM)
CSC_I9000TMHJM2 - T-Mobile Hungary (Unbranded, PCODE TMH)
CSC_I9000GVD2JM3 - Vodafone Deutschland (Branded, PCODE VD2)
CSC_I9000XEFJM2 - Country Specific France (Unbranded, PCODE XEF)
CSC_I9000XENJM1 - Country Specific Netherlands (Unbranded, PCODE XEN)
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
Extract the downloaded .rar archives to the same folder.
The archives are contain .tar.md5 files. Do not open them with Winrar for example. They are compressed Odin images which do not need unpacking.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000XWJM9.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM4.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using *Multi CSC* you need to:
Turn on USB debugging and plug in the phone.
Open command prompt and type:
Code:
adb shell
am start -a android.intent.action.MAIN -n com.android.Preconfig/com.android.Preconfig.Preconfig
Then select the desired CSC version from the list and press "Install" (this happens on phone screen!).
The phone will reboot once the change is done.
**Read this if you are downgrading from I9000XXJPC rom**
Requirements: Rooted phone, "Root Explorer" (or similar), .nv_data.bak and .nv_data.bak.md5 files (PRIOR the date of I9000XXJPC release).
Because I9000XXJPC rom rewrites certain thing in the permanent memory area of the phone, certain things CAN occur when you downgrade the phone to <I9000XXJPC firmware. It is possible that there will not be any problems at all, but if there is read below.
Possible problems (I had them all due trying different thing to solve it):
IMEI "corruption".
nv_data.bin checksum does not pass the check and the phone / baseband generates a new blank one. Baseband test IMEI (000xxxxxxxxxxxx) will be displayed.
No service.
There is no service even a functional SIM card is inserted.
You cannot receive or make calls, receive or send sms, etc (obviously).
Freeze / lock-down.
The phone will not react to anything besides pressing power key.
You cannot unlock the display to enter PIN code.
Wrong PIN code.
The phone will not accept any PIN code on any SIM (even the correct one ).
Phone displays "wrong PIN code" message even the try counter (three strikes you know) does not change.
Product code changed to KOR.
= Blocked Kies updates (without a registry "hack")
Here is how to fix any or all of them:
Downgrade to I9000XWJM9 firmware with Odin (as usual).
Remove SIM card from the phone (to be able to boot in first place) and start the phone.
Gain root access and install "Root Explorer" (or similar), ADB works too.
Open Root Explorer and go to the "EFS" folder in the root.
Check the date on .nv_data.bak and .nv_data.bak.md5 files.
If it is earlier than 08/26/2010 you´re clear, if it is later then you may stop reading.
Once the date has been checked, select files nv_data.bin and nv_data.bin.md5 simultaneously and delete (yes, delete) them. Reboot the phone.
Now your phone is in the same condition (atleast permanent memory wise) as it was prior I9000XXJPC update.
There is a safety feature I would call "a dead mans switch".
If the current nv_data files are deleted, the phone will make new nv_data files from the .bak (backup) files (if they excist). The new nv_data files will be signed automatically so they pass the checks (none of the errors listed above will occur). However if they do not excist, the phone will just write an empty / test file (= IMEI corrupted, no service, etc). Also if you just rename .bak files they will have wrong signatures and the same problems will occur.
There is no bootloaders included, so it is safe to flash for everyone.
Regards.
- Nottingham
AWESOME!
We missed you! Now waiting for custom roms based on this firmware
Thank you so much, Richthofen! Keep up your great work!
welcome back
Here we go again Thanks!
Thanks
Keep the good work going
For the netherlands you can use the "remake" I9000XENJM1 csc file.
You can find the thread here
http://forum.xda-developers.com/showthread.php?t=799077
Or the direct download link
http://www.mijnbestand.nl/Bestand-PFQY6O7XBRYM.tar
If I'm already running JM8, can I just flash the PDA in Odin?
If I can, will I lose all my data?
thanks Richthofen.
Thx for informing us
Anybody flashed this ?
wow, here we go again !!! lol... another eclair leak
Changelog ? someone have tried this?
thank you .. but how come no 2.2 leak from you??
If this has the slightest improvement over JM8 it will be awesome!
Richthofen
Click to expand...
Click to collapse
OXE *Multi CSC* (for Baltic, Kazakhstan, Russia, Ukraine)
Do You have more recent version than CSC_I9000OXEJM1.rar ???
Thanks in advance!
Thanks for this. Keep up the good work.
lownoise said:
Keep the good work going
For the netherlands you can use the "remake" I9000XENJM1 csc file.
You can find the thread here
http://forum.xda-developers.com/showthread.php?t=799077
Or the direct download link
http://www.mijnbestand.nl/Bestand-PFQY6O7XBRYM.tar
Click to expand...
Click to collapse
Thanks, just what I needed.
I have a French Galaxy S
Rooted, unlocked and now using in Malaysia.
Which CSC should I use?
Will I need to root / unlock again after the firmware upgrade?
Thanks as always!
Probably will download a bit later, when custom rom is ready (which will probably be soon).
Your the best =)
Awesome, can't wait to try even though is not 2.2. Thanks!
Thanks a mill!
Wonder if it's worthwhile updating to this from JM8... Build date differs about a week. Guess I'll just wait for some remarks and responses
got it now, feels kinda more smooth than jm8, maybe just cause of reboot
do you guys think i can run voodoo over jm9 too?
Usually I would not release a firmware for a customized variant, but in this case I made an exception because the firmware felt so damn fast (feels like JM9 ^2).
It might just be because of the epic hangover I have, but anyway...
Few facts about this version:
BETA release (not official, obviously)
Version: 2.1 Eclair
PDA version I9000TDOJJ1
PDA Build time: 2010.10.05 18:37:01 KST
PDA Changelog: Unknown
MODEM version I9000XXJM4
MODEM Build time: 2010.08.31 10:26:45 KST
MODEM Changelog: Unknown
This firmware is made for Telstra "customized" (the firmware itself is not branded) GT-I9000T phone. The main hardware is identical with GT-I9000, so the firmware will work just fine with a normal GT-I9000 (atleast have not notice any problems yet). Of course we will use a modem FW made for Europe
However the CSC files made for GT-I9000 do not work with this firmware directly. To be able to use the CSC files with this firmware, a fix needs to be applied:
USE CSCs FROM THIS ARCHIVE ONLY. OTHER ONES LISTED BELOW ARE FOR REFERENCE ONLY, THEY DO NOT WORK WITH THIS FIRMWARE.
They are all in single package to save time: GT-I9000(T)_FIXED_CSC.7z
Download and make your pick.
Use as a normal update.zip via recovery.
Clear cache afterwards (via recovery also).
DO NOT USE ODIN3
Extract the .7z archive and put the update.zip file to the root of your internal sd card.
Flash your phone with CODE and MODEM file ONLY.
After the flash there will be no CSC (does not matter). Reboot to recovery mode and select apply sdcard:update.zip (execute by pressing home key).
After that the CSC will be working fine.
The modem firmware has been updated from I9000XXJM3 used in my previous releases to I9000XXJM4 (final). This version should have some actual changes too (besides fixed typos in operator names).
All CSC versions are I9000???JM1 and unbranded, but CSC´s for specific operators (Vodafone for example) are included.
UI / Swype languages supported by DOJJ1:
UI: Bulgarian, Czech, Danish, Deutsch DACH, Dutch, English (Australia, Ireland, New Zealand, South Africa, UK, US), Estonian, Finnish, French, Greek, Hungarian, Icelandic, Irish, Italian, Kazakh, Latvian, Lithuanian, Macedonian, Norwegian, Polish, Portuguese, Russian, Slovakian, Slovenian, Spanish, Swedish, Turkish, Ukrainian
Swype: English (Australia, Ireland, New Zealand, South Africa, UK, US), Deutsch DACH, Dutch, French, Italian, Polish, Portuguese, Spanish, Turkish,
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000(T)-I9000TDOJJ1_I9000XXJM4_CODE-MODEM.7z
CSC_I9000?????? (CSC corresponding your PCODE)
I know this is not nearly all of the excisting variants, but repacking the softwares is quite a slow process for certain reasons. I have access to pretty much any Samsung firmware, so if you find a variant missing you can send me pm. I can have a look.
Download links:
GT-I9000(T)-I9000TDOJJ1_I9000XXJM4_CODE-MODEM
CSC_I9000DBTJM1 - Generic Germany (Unbranded, PCODE DBT)
CSC_I9000OXAJM1 - Generic Europe Multi-CSC (Unbranded, PCODE(s) CPW, DBT, ITV, KOR, XEF, XEO, XEU)
CSC_I9000OXEJM1 - Baltic, Kazakhstan, Russia, Ukraine Multi-CSC (Unbranded, PCODE(s) SEB, SEK, SER, SKZ)
CSC_I9000OXXJM4 - Europe - Africa Multi-CSC (Unbranded, PCODE(s) ATO, AUT, CNX, COA, COS, CRO, CYO, CYV, EUR, HAT, IRD, KOR, MET, MOT, MOZ, MSR, MTL, O2C, O2I, ONE, ORO, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM
CSC_I9000BMCJH2 - Bell Canada (Branded, PCODE BMC)
CSC_I9000HUIHUI - Tre H3G Italy (Branded, PCODE HUI)
CSC_I9000OLBJG4 - Asian Multi-CSC (Unbranded, PCODE(s) CCM, DGI, GLB, MIS, MM1, SIN, SMA, STH, THL, UMB, XEV, XME, XSE, XSO, XSP, XTC, XTE, XXV)
CSC_I9000OPSJG1 - Optus Australia (Unbranded, PCODE OPS)
CSC_I9000XEEJM1 - Generic Nordic (Unbranded, PCODE XEE)
CSC_I9000TMNJM1 - TMN Portugal (Branded, PCODE TMN)
CSC_I9000TMNJM1-CLEAN-v2 - TMN Portugal (Custom, PCODE TMN)
CSC_I9000XECJM1 - Generic Spain (Unbranded, PCODE XEC)
CSC_I9000PANJM1 - Telenor Hungary (Branded, PCODE PAN)
CSC_I9000PRTJM2 - Play Poland (Branded, PCODE PRT)
CSC_I9000SWCJM1 - Swisscom Switzerland (Branded, PCODE SWC)
CSC_I9000TENJM2 - Telenor Norway (Unbranded, PCODE TEN)
CSC_I9000TIMJM2 - TIM Italy (Branded, PCODE TIM)
CSC_I9000TMHJM2 - T-Mobile Hungary (Unbranded, PCODE TMH)
CSC_I9000GVD2JM3 - Vodafone Deutschland (Branded, PCODE VD2)
CSC_I9000XEFJM2 - Country Specific France (Unbranded, PCODE XEF)
CSC_I9000XENJM1 - Country Specific Netherlands (Unbranded, PCODE XEN)
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
Extract the downloaded .rar archives to the same folder.
The archives are contain .tar.md5 files. Do not open them with Winrar for example. They are compressed Odin images which do not need unpacking.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000TDOJJ1.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM4.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using *Multi CSC* you need to:
Turn on USB debugging and plug in the phone.
Open command prompt and type:
Code:
adb shell
am start -a android.intent.action.MAIN -n com.android.Preconfig/com.android.Preconfig.Preconfig
Then select the desired CSC version from the list and press "Install" (this happens on phone screen!).
The phone will reboot once the change is done.
**Read this if you are downgrading from I9000XXJPC rom**
Requirements: Rooted phone, "Root Explorer" (or similar), .nv_data.bak and .nv_data.bak.md5 files (PRIOR the date of I9000XXJPC release).
Because I9000XXJPC rom rewrites certain thing in the permanent memory area of the phone, certain things CAN occur when you downgrade the phone to <I9000XXJPC firmware. It is possible that there will not be any problems at all, but if there is read below.
Possible problems (I had them all due trying different thing to solve it):
IMEI "corruption".
nv_data.bin checksum does not pass the check and the phone / baseband generates a new blank one. Baseband test IMEI (000xxxxxxxxxxxx) will be displayed.
No service.
There is no service even a functional SIM card is inserted.
You cannot receive or make calls, receive or send sms, etc (obviously).
Freeze / lock-down.
The phone will not react to anything besides pressing power key.
You cannot unlock the display to enter PIN code.
Wrong PIN code.
The phone will not accept any PIN code on any SIM (even the correct one ).
Phone displays "wrong PIN code" message even the try counter (three strikes you know) does not change.
Product code changed to KOR.
= Blocked Kies updates (without a registry "hack")
Here is how to fix any or all of them:
Downgrade to I9000TDOJJ1 firmware with Odin (as usual).
Remove SIM card from the phone (to be able to boot in first place) and start the phone.
Gain root access and install "Root Explorer" (or similar), ADB works too.
Open Root Explorer and go to the "EFS" folder in the root.
Check the date on .nv_data.bak and .nv_data.bak.md5 files.
If it is earlier than 08/26/2010 you´re clear, if it is later then you may stop reading.
Once the date has been checked, select files nv_data.bin and nv_data.bin.md5 simultaneously and delete (yes, delete) them. Reboot the phone.
Now your phone is in the same condition (atleast permanent memory wise) as it was prior I9000XXJPC update.
There is a safety feature I would call "a dead mans switch".
If the current nv_data files are deleted, the phone will make new nv_data files from the .bak (backup) files (if they excist). The new nv_data files will be signed automatically so they pass the checks (none of the errors listed above will occur). However if they do not excist, the phone will just write an empty / test file (= IMEI corrupted, no service, etc). Also if you just rename .bak files they will have wrong signatures and the same problems will occur.
There is no bootloaders included, so it is safe to flash for everyone.
Regards.
- Nottingham
Is browser doubletap zoom working properly?
vov! it's build date is 05.10... i just flashed jm9 but i'm going to try this too...
Very Fast? Does this translate into better benchmarks as well?
I suppose the GPS is fixed in this one, so How's the FM radio?still mono?
How much RAM? how much available?
Any new apps?
I'm interested in the benchmark to see if there is any improvement in the I/O...
Thanks
Duplicate post - sorry
JM9 ^2 ????
That certainly sounds like an exaggeration!
@Richthofen: Why are you perpetually drunk?
Heh.. Thanks for the firmware though! Will wait for a version for the I9000 itself with whatever changes this has!
Any weird "phone informations" change?
just installed this.
I'm getting frequent fcs specifically: com.google.process.gapps keeps popping up to apologise for crashing..
consequently i can't put my google credentials in
All Day On XDA said:
just installed this.
I'm getting frequent fcs specifically: com.google.process.gapps keeps popping up to apologise for crashing..
consequently i can't put my google credentials in
Click to expand...
Click to collapse
did you try fctory reset/wipe after flashing?
yes - am gonna try again now with a cache wipe too
- didnt work
are any of the csc links working?
where can i download these from?
Whoa!!!! Slow down buddy.....
Was about to flash JM9 tonight and here come another release.....
Keep the releases coming buddy.
Cheers....
When I flash CSC after all this, it reboots me to recovery and give some weird error with "get build prop".
Btw. root via update.zip not working, the same getprop error, flashing back to JM9.
BaalBehrit said:
When I flash CSC after all this, it reboots me to recovery and give some weird error with "get build prop".
Btw. root via update.zip not working, the same getprop error, flashing back to JM9.
Click to expand...
Click to collapse
Same error here, but still willing to test this firmware
Going to wipe everything and see if I can get past the boot splash animation where it is hanging on..
Thanks Richthofen, truly the BEST 2.1 rom. Blazing fast !
Here's update.zip for rooting thism firmware:
http://forum.xda-developers.com/showthread.php?p=8550966#post8550966
DocRambone said:
Thanks Richthofen, truly the BEST 2.1 rom. Blazing fast !
Click to expand...
Click to collapse
Could you please post some facts? is the I/O a lot better?
Can't get through csc installation...i installed update.zip,rebooted,shutdown,flashed csc,but i have cache\sec_csc (or something similar) error...and i get black screen using csc selection through adb (just the white box on top,no choices below),and using *#1234# i see modem verison only,other fields are blank.
Fact is,that everything is working fine so far (just configured gmail and entered market)...should i care or not?
JJ1? Does Samsung pull version numbers out of a hat? Seriously, what ever happened to just starting at version 1 and going up from there?
New Zopo zp780 Quad Core
This is the new Phone that is arrived on the market!
Everybody are welcome!
MANY THANKS TO OUR MODERATORS !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Section Details:
BRAND and MODEL
Brand: ZOPO
Model: ZP780
Carrier: Unlocked
Sim card: Dual sim dual standby
Multi-Language: Afrikaans, Bahasa Indonesia, Bhasa Melayu, Catala, Cestina, Dansk, Deutsch, English, Spanish, Filipino, French, Hrvatski, IsiZuzu, Italia, kiswahili, Latviesu, Lietuviu, Magyar, Nederlands, Norsk Bokmal, Polski, Portuguese, Romana, Rumantsch, Slovencina, Slovenscina, Suomi, Svenska, Tieng Viet, Tagalog, Turkish,Greek, Bulgarian,Russian, Serbian, Ukrainian, Hebrew, Urdu, Arabic, Persian, Amharic, Hindi,Thailand, Korean,日本語,Traditional Chinese, Simple Chinese
View Screenshot for zp780 android4.2 support languages
OS and CPU
Operating System: Google Android 4.2 Jelly Bean OS
CPU: MTK MT6582 1.3GHz, Cortex-A7 quad-core process
GPU:ARM mali400-MP2 500Mhz
NETWORKING
[size=11.818181991577148px]SIM Size: 1 Normal SIM & 1 Micro SIM
[size=11.818181991577148px]Dual sim dual standby, WCDMA/GSM+GSM
2G: GSM 850/900/1800/1900 MHz
3G: WCDMA 900/1900/2100 MHz
Data Technology: GPRS, Edge, HSPDA, HSDPA
Data Speed: HSDPA21 Mbps, HSUPA 5.76Mbps
http://maps.mobileworldlive.com
CAMERA and VIDEO
Rear camera: 5MP(show 8MP), AF, LED Flash
Front-facing cam: 2MP(show 5MP, effective)
Video capture: 720P(1280*720, 30FPS)
Video Play：720P(1280*720, 30FPS)
ENTERNAINMENT
Video play formats: MP4/3GP/MOV/MPEG/MKV/FLV, ...
Audio play formats: MP3/AMR/AAC/ASF/Ape/Flac ,...
Ring Tone: MP3/AAC/ASF,...
Picture formats: JPEG/PNG/GIF/BMP,...
CONNECITIVITY and COMMUNICATION
USB support: 5Pin Micro USB v2.0
WiFi:Wi-Fi IEEE 802.11 b/g/n
Synchronization via Exchange ActiveSync
WebKit web browser with zoom
Bluetooth technology: Bluetooth v4.0
VPN
GPS satellites: YGPS,A-GPS
Sensor: Gravity Sensor, Compass, proximity sensor
DISPLAY
Screen Size: 5-inch
Color Support: 16 Million Colors
Screen Technology: TFT Multi-touch capacitive Screen
Display resolution: QHD 960*540 pixels
PRE-LOADED APPLICATIONS
Google Maps
Google Talk
Google Mail
Google Calendar
Google Play Store
Documents to go
MEMORY
Internal phone storage: 4GBMB EMMC
RAM: 1GB
Memory card support : MicroSD Card up to 64gb
BATTERY
Batteryi-Polymer, 1800mAh
Standby time: 100-150 hours
SIZE
Dimensions: 145.2mm*71.74mm*8.25mm
Weight:1125±2g（include battery）
Section Software:
Drivers :
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html
http://www.4shared.com/rar/qM8hDW5u/zopo_usb_drivers.html
http://ge.tt/2yL21VT/v/2
New Firmware zp780 20140317 - 194809
http://www.4shared.com/zip/rJuJrWA_ce/ZP780_20140310-194809__1_.html
Boot Patched:
http://www.4shared.com/file/jeIbZZa2ba/Zopo_Zp780_boot_patched_140419.html
New Firmware zpZP780_20140122-164853
http://awnmgqri7w.l29.yunpan.cn/lk/QprYSFVctcRC6
Boot Patched
http://www.4shared.com/zip/kVPbKpq3ce/boot_patched_zp780-Fw140116.html
Recovery Modded cwm 5504:
http://www.4shared.com/zip/rvzv2l17ba/recovery-zp780.html
Super Su
http://www.4shared.com/zip/Soks3l28ba/UPDATE-SuperSU-v191.html
Mtkdroidtools:
http://www.4shared.com/rar/SIZQYYL3/MtkDroidTools_v242.html
Flashtools v 3.1316.0.150:
http://www.4shared.com/zip/RHJJa1Qx/sp_flash_tool_exe_v313160150.html
Primary Partition da 2,5 gb (Max possible on zp780)
http://d-h.st/zrb
ask to me is that link are broken!
Installing Software:
Installing the drivers :
procedure :
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way ( the COM port may be different )
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict , or even if you just do the casino and installed it different ,
to solve , you can try to use the program
USBDeview :
[ SPOILER ] http://www.nirsoft.net/utils/trans/usbdeview_italian.zip [/ SPOILER ]
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC.
Install the Firmware:
PROCEDURE
1 ) Installing the Firmware
To download the new firmware.
Do unzip the compressed file and insert into the firmware folder :
a) recovery amended
b ) Ebr1 and 2 to increase the primary partition up to 2.5 GB
c) patched boot
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected !
Run Flashtool ..... select the file , and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This ' whole simplified procedure for installing the original firmware.
section Root
1 ) PROCEDURE ( SuperSu )
( Prerequisite )
Install the new firmware in advance if you have not already ' patched or fleshate boot with the boot patched .
( prerequisite to understand if you have a clean system 'that has to go out the base language and that ' English )
If you do not have English as the base language head to recovery ( recommended cwm 5504 )
before you do a full firmware flesh total wipe and wipe cache davil )
Having had access to the Android system :
1 ) enable the menu ' settings:
a) menu ' security enable unknown sources ;
b ) menu ' enable developer ,
USB debugging ;
mock locations .
Connect the USB cable and copied to the external memory (Micro SD)
in root ( no folders ) of the same file updatesupersu versXX.zip .
Restart mode ' recovery using:
1 ) the program mtkdroid tools on the front page ,
2 ) the unique method still works but more ' long . :
Turn off the phone and connect the USB cable to recharge the battery,
wait until the little red light charging lights (important)
now you can with the simultaneous pressure of the fingers on the keys:
Power + volume + lever
and wait without removing pressing keys ... that the phone reboots mode ' recovery.
At this point select install zip file and select super user and run it .
Restarting will have root on the phone!
( If you restart there is no ' app Super Upon repeat paying attention to the language of the firmware and that ' an important signal that it makes you realize that the system is ' clean and that there were traces of other changes in your phone)
reserved 4
broken link
Hi ghost45, the link of the new firmware is fallen. Can you put the file on another server? And...do you know why this phone charge the battery in 4 hours or 5?
Thanks for the post! :fingers-crossed:
custom rom based on kitkat on our device has a chance to see the light of day?
Does this zopo zp780 work on a UMTS 2100 mhz 3g network?
It´s a shame Brazil won't support this one. Seems a very, very good phone.
Wateva! said:
Does this zopo zp780 work on a UMTS 2100 mhz 3g network?
Click to expand...
Click to collapse
3G: WCDMA 900/2100 MHz info from the official store zopo
mirrr46 said:
3G: WCDMA 900/2100 MHz info from the official store zopo
Click to expand...
Click to collapse
Yes, I read that, I just don't know if UMTS is under WCDMA. Or to express myself better, if a device supports WCDMA, does it support UMTS?
Anyway, I ordered the phone and expecting it by the end of the month.
New Firmware zp780 20140317 - 194809
New Firmware zp780 20140317 - 194809
http://www.4shared.com/zip/rJuJrWA_ce/ZP780_20140310-194809__1_.html
ghost45 said:
New Firmware zp780 20140317 - 194809
http://www.4shared.com/zip/rJuJrWA_ce/ZP780_20140310-194809__1_.html
Click to expand...
Click to collapse
You wrote zp780 20140317 and the file is ZP780_20140310-194809 ?
Would anyone who actually have one let me know what GSM/WCDMA frequencies it supports? Thank you
Daved+ said:
Would anyone who actually have one let me know what GSM/WCDMA frequencies it supports? Thank you
Click to expand...
Click to collapse
2G: GSM 850/900/1800/1900 MHz
3G: WCDMA 900/2100 MHz
New Firmware zp780 20140317 - 194809
http://www.4shared.com/zip/rJuJrWA_ce/ZP780_20140310-194809__1_.html
Boot Patched:
http://www.4shared.com/file/jeIbZZa2...ed_140419.html
Hi, we have new update:
ZP780 20140414 - 152444
Size 333.64 MB
Release date : 2014-04-14
mirrr46 said:
Hi, we have new update:
ZP780 20140414 - 152444
Size 333.64 MB
Release date : 2014-04-14
Click to expand...
Click to collapse
Thank you for info, where avaiable this ?
Please post a link if possieble.
By the official software aplition which is in android
mirrr46 said:
By the official software aplition which is in android
Click to expand...
Click to collapse
thanx , i will check it in offical rom.