is there any solution for my battery problem ?as can you see the graph and time does't compatible with battery percentage(does't change) because i am unplug my mobile before many hours, told my just 19 s does't change ,i am trying to make out battery for long time and return it , reset factory ,and finally installing jellybean 4.1.1 but also same
my jellybean from Google ,i did't make root...
i hope getting good news
this problem solved by cleaning USB port
what does one use to clean the usb port?
Bricked after Update of New firmware for the Smartwatch 2 to version 1.0.B.3.46/1.0.A.3.8
Hello,
Today Morning my watch updated on it's own I presume to New firmware version (1.0.B.3.46/1.0.A.3.8. ( flashing and the wavy display) after update it felt quite sliugissh so I decided to update using the utility .
The utility indicated new update available but when I tried to update it said failed . After that the watch refuses to turn on .
I have tried following
1. USe the 15-20 sec reset using power button - NO use
2. Tried to update again using the Sony Update utility ( The watch is recognized - it tries to update and then quickly says failed)
3. Charged it for almost 3 hours and tried again - Same result .
Now going by the other messages I have to try following
1. Charge overnight and try again
2. Leave it without power for few days and try again.
Does anybody know some other trick.
I cannot easily return it to Sony as at the moment travelling in Africa
Anil
What kind of charger you use? Try to turn on with wallcharger in it!
Sent from my LT29i using xda app-developers app
It could be that the power button is somewhat stuck, try and push in the face of the watch, that happened to me some days ago, watch turned off itself and I couldn't turn it back on.
So I remembered someone saying that they had the power button stuck and shortly after the watch became loose; mine seemed fine but (not sure if it was that) I pushed a little on the face as to fit it better and there you go, it powered on again.
It's a long shot, but hey, doesn't hurt to try...
Sent from my C6833 using Tapatalk 2
I had the same exact issue
Just try to install the software with another computer with update service
Sent from Sony Tablet Z
I have the exact same problem.
I cannot reinstall the software because it fails every time.
Is there a way to hard reset or return to the previous firmware?
GeorgeCm said:
I have the exact same problem.
I cannot re install the software because it fails every time.
Is there a way to hard reset or return to the previous firmware?
Click to expand...
Click to collapse
Till now Not found a solution or alternatives ways
@ BLK900 ->> BTW I have tried on three different machines with Firewalls off /AV switched of to rule out any outside interference .
@ fastest83 ->> The power button is working fine as after pressing it it detects the watch in update service .
I think something is botched up in sony update service .
I found a thread on http://talk.sonymobile.com/t5/Wireless-accessories/bd-p/accessories/page/2 - where one user had excatly same problem after running update on SBH52 ( bluetooth headset launched at the same time). He allowed the battery to fully run down before running the update . I am going to try that
Anybody has a idea when the battery will run out in off state ( while running mine used to last 2-3 days)
Sony must fix the update service or provide us a manul way to flash older firmware . so far my emails to service have not yeilded any results . getting the same boilerplate message run the update service or return it back for repair .
Anil
pranil said:
Till now Not found a solution or alternatives ways
Anybody has a idea when the battery will run out in off state ( while running mine used to last 2-3 days)
Sony must fix the update service or provide us a manul way to flash older firmware . so far my emails to service have not yeilded any results . getting the same boilerplate message run the update service or return it back for repair .
Anil
Click to expand...
Click to collapse
As for the battery, I'd expect at least 2 weeks while off, maybe even more...
I would try to run the update service several times (if it recognise the watch, that means the watch is somewhat on) to see if the battery runs out faster...
Sent from my C6833 using Tapatalk 2
does it show a number at the top left when switching on before the sony logo? i had the same issue today but fixed it.
derkie said:
does it show a number at the top left when switching on before the sony logo? i had the same issue today but fixed it.
Click to expand...
Click to collapse
i have the number .3 25 11.
i can't pair the sw2 with my nexus 5. i don't know why!
someone can help me? what can i do?
danymexi said:
i have the number .3 25 11.
i can't pair the sw2 with my nexus 5. i don't know why!
someone can help me? what can i do?
Click to expand...
Click to collapse
Mine after showing that error code, it vibrates 3 times... All I did is charge it until the pairing animation shows up then I paired it manually via Bluetooth - it paired and it booted twice and that's it.
derkie said:
Mine after showing that error code, it vibrates 3 times... All I did is charge it until the pairing animation shows up then I paired it manually via Bluetooth - it paired and it booted twice and that's it.
Click to expand...
Click to collapse
when the sony battery is 100% my sw2 didn't reboot in pairing animation. and if i press the power button, it vibrates 3 time and i can't pairing the phone. it said i can't piar because the pin or the passwork are wrong. but i didn't put any password or pin.
Can someone help me?
danymexi said:
Can someone help me?
Click to expand...
Click to collapse
Try the pairing with another smartphone, then when paired use the icon Settings on the SW2 to reset it, and then try the pairing again with your smartphone.
Dead
My smartwatch 2 stopped responding the 2nd day I bought it. It was showing the Sony logo and that was all. Tried updating with SUS, went ok and when restarted phone it shows logo and. 3 25 11 code. The phone is detected in SUS but update atempt fails. Tried charging, it appears that is charging but the percentage doesn't rise until restart. I think is dead.
pranil said:
Bricked after Update of New firmware for the Smartwatch 2 to version 1.0.B.3.46/1.0.A.3.8
Hello,
Today Morning my watch updated on it's own I presume to New firmware version (1.0.B.3.46/1.0.A.3.8. ( flashing and the wavy display) after update it felt quite sliugissh so I decided to update using the utility .
The utility indicated new update available but when I tried to update it said failed . After that the watch refuses to turn on .
I have tried following
1. USe the 15-20 sec reset using power button - NO use
2. Tried to update again using the Sony Update utility ( The watch is recognized - it tries to update and then quickly says failed)
3. Charged it for almost 3 hours and tried again - Same result .
Now going by the other messages I have to try following
1. Charge overnight and try again
2. Leave it without power for few days and try again.
Does anybody know some other trick.
I cannot easily return it to Sony as at the moment travelling in Africa
Anil
does anyone found the answer for this issue?
my phone is dead too after the update.
i cant turn it on at all and i did connect with the wallcharger all the night.
Click to expand...
Click to collapse
I sent my watch back to Sony. No answer yet. I will post the results when it will arrive.
Sent from my Nexus 5 using Tapatalk
so severoprisan, how is your sw2? is it repaired? what did they say?
Not yet. It takes 1-3 weeks from January 10th. So I'll wait.
Sent from my GT-N5100 using Tapatalk
Same here
I had the same issue. Called Sony and went through some troubleshooting before they decided it needed to be returned. The support people do not seem to have any idea why this is happening.
Not a great experience with their support people. They promised an RMA and then "forgot" to issue it. It took three calls, but the watch has finally been sent to them. I'm awaiting the refurb now.
update: Got a call from Sony. During the conversation, they mentioned that they do not send out refurbs and that the replacement watch I will receive should be brand new.
update 02/29/14: Received the replacement watch today. Pretty fast turnaround. Now I just hope this one doesn't brick, too.
I had same problem, got this watch on Christmas and after update sth gone wrong and only Flash FS message on screen. Tried everything and no luck. Finally contact Sony and send to SBE (in UK that company services most of mobile phones as manufacture service) and got replacement watch after only... 3 weeks
Sent from my C5303 using Tapatalk 2
Talked to service, they told me that they have 2 SW2's and there is no way to repair them if bricked. So i'm waiting for the replacement watch.
Sent from my Nexus 5 using Tapatalk
I installed a new ROM on my Note 3 and in order to re-pair it with the phone I reset Moto 360 and now I cannot get it paired again. In the Android Wear app it just shows as "Connecting" but I was able to pair it via Bluetooth settings. Now it is just stuck at a " Just a minute" with a circle going around. Before I started the pairing process Moto 360 was at 84% battery, so not sure if it's a battery issue.
With that said, is there any other way to pair the watch other then resetting to stock?
ajamils said:
I installed a new ROM on my Note 3 and in order to re-pair it with the phone I reset Moto 360 and now I cannot get it paired again. In the Android Wear app it just shows as "Connecting" but I was able to pair it via Bluetooth settings. Now it is just stuck at a " Just a minute" with a circle going around. Before I started the pairing process Moto 360 was at 84% battery, so not sure if it's a battery issue.
With that said, is there any other way to pair the watch other then resetting to stock?
Click to expand...
Click to collapse
You may have to reset the watch a few times, I saw someone else having an issue with getting it to connect before resetting it three times.
TheJesus said:
You may have to reset the watch a few times, I saw someone else having an issue with getting it to connect before resetting it three times.
Click to expand...
Click to collapse
Thanks, I got it working after resetting it few times.
Scribbled on Note 3.
Good christ mine has been a PitA to get up and running. The original update kept failing on me despite the fact it was charged to 100%.
Now, Ive reset it multiple times after the update, but i keep getting stuck on "connecting" on the phone and "just a minute" on the watch. This is after the pair code in the app and everything.
Hi there,
I recently bought a Hyundai Kona and I am trying
to connect a Wileyfox Swift 2 phone using android auto . Nothing happens . I downloaded the AA app and
set it up on my phone but when I plug it in to the car, the AA logo on the cars head unit doesn’t turn on. I tried an iPhone and it connected immediately.
Can anyone advise ? Please ?
Dancer61 said:
Hi there,
I recently bought a Hyundai Kona and I am trying
to connect a Wileyfox Swift 2 phone using android auto . Nothing happens . I downloaded the AA app and
set it up on my phone but when I plug it in to the car, the AA logo on the cars head unit doesn’t turn on. I tried an iPhone and it connected immediately.
Can anyone advise ? Please ?
Click to expand...
Click to collapse
Did you connect using original USB cable ?
Usually poor quality cables are cause problems with connectivity.
https://youtu.be/YaMUIxu4uLE
Sent from my iPhone using Tapatalk
I would like to discuss this topic also. My wife has Kona 2018-2019 and I'm interesting in how to change or update this head unit software or install something like navigation in it thru android system or android phone?
Thanks for any help.
A little review of system : This KONA has android based software and all I can see in settings is version of software : os.eur.sop.v085.180528.dau_a and firmware is : os.eur.267.180113.micom.dl
Hi there
I have Huawei GT2 46mm classic for a while now, yesterday i notice that the watch trun on and of suddenly and the battery was 5% i thought because the battery is low and charged it to 100%, but today i noticed the same happened so i did a factory reset but with no luck to get it work and connect it to my phone, it shows me select language and after 30 sec it freezes and restarts but i dont see the Huawei logo when it does, and the health app says not supported when i try so many times because it keeps restarting
Plz anyone help me, i bought it form China and there is no Huawei care center in my country
Thanks
Sent from my MI CC9 Pro using Tapatalk
Did not have such problems. Try to reset the watch to factory settings, if that does not work it is broken.