Develop Bugs

LEWA os for Q1010i

Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHQUFqZi1EM3lCcEk&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy

maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHeGczZFpUSXpvN3c&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
I know it is based on kitkat but you should mention it and try to provide screenshots and features of the rom to get more attention.
I am currently on your lenovo rom and i am getting battery backup of more than 2 days as like stock but unable to find the option of battery usage in lenovo rom.

rishusngh said:
I know it is based on kitkat but you should mention it and try to provide screenshots and features of the rom to get more attention.
I am currently on your lenovo rom and i am getting battery backup of more than 2 days as like stock but unable to find the option of battery usage in lenovo rom.
Click to expand...
Click to collapse
Hi,
This Lewa OS is 4.2.2 not KitKat
You can view Battery usage in Lenovo Power app, but after installing Xposed Framework and BatteryStat for Kitkat module. My problem with Lenovo ROM is I am getting Battery life of 12 Hrs. I m on 3G/Wifi full day and Battery Stats shows Radio (Network) using 40-45% of Battery. I was Stock Rom as same but still i had 40% battery remaining at night. I m stock battery use was very good. Hopes for solution in next update.

Hi,
I have uploaded a new VIBEUI2 rom for the q1010i.
It should be better I think for battery life.
If you have issues on the older one. can you try deleting 2 files. Libaal and libaal_custom.so and test. Thanks

maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHeGczZFpUSXpvN3c&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
Sim card not detecting any fix yet?

No such issue noticed in testing... I suggest to do a complete Factory reset, Cache, Dalvik wipe and format Data,Cache,System. Then install afresh.
Best of Luck.

andro2master said:
No such issue noticed in testing... I suggest to do a complete Factory reset, Cache, Dalvik wipe and format Data,Cache,System. Then install afresh.
Best of Luck.
Click to expand...
Click to collapse
done everything u said but still no sim card is detecting:crying: help

Using this ROM for a couple of days now. It has a few bugs
Initially had issues detecting the SIM cards. Got fixed later, after a few reboots, swapping sims etc - dont ask me how, dont know. I cut the SIMs by hand, and they are slightly smaller than ideal.
Messaging App says "Unfortunately contacts has stopped" and force closes. Happens quite frequently opening new messages from notification
Touch seems to be slightly off the UI elements- especially notification area and check boxes in general. I broke and replaced my LCD recently, not sure if this is because of that.
Unable to get gravity box working, GB framework crashes on opening. Some Xposed modules do work, XuiMod and other theming mods are not working.
Phone freezes occasionally and I faced one random reboot.
General RAM usage is high - only around 300mb available after clearing. But this is expected as it is JB and not KK
I downloaded the OTA update for this ROM, but was unable to flash the same. I think it is identifying that the phone is not the proper model to receive this update. Didnt capture the exact error
Battery backup and look and feel, transition effects and operational ease is pretty good(if you dont deal with SMS much).

maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHQUFqZi1EM3lCcEk&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
Storage Issues..??

ASUS ZE550ML CM 13 and BLISS 6.2 issue

Hello, i am having some issue with Custom Rom. I am compleletly newbie in those things but still i did root and install CM 13 with the help of reddit. Everything was perfect till i found my dialer is not working. Whenever i try to call someone "Unfortunately, Phone has stopped" pop up. Then i installed BLISS 6.2 ROM. Dialer issue was fixed but BATTERY backup was so POOR. In a standby mode i got 3 hours of battery and that's not it after using 3 to 4 hours system UI start lagging and getting unable to use. Thing is my friend DEVICE is ASUS ZE551ML 2GB is used the same method and same rom but his one is completely perfect and no issue at all. I don't what's wrong with mine. Would be pleasure if anyone can solve it.

When using the nightly cm rom, you may not expect it to be perfect, as bugs are fixed daily, and some of these fixes will kill something else. That is what happened April 9th with the dialer. The build of April 16th has fixed that problem, amongst other things, so try that one. (until we find something else to break...)
Verstuurd vanaf mijn ASUS_Z00A met Tapatalk

Sajib95 said:
Hello, i am having some issue with Custom Rom. I am compleletly newbie in those things but still i did root and install CM 13 with the help of reddit. Everything was perfect till i found my dialer is not working. Whenever i try to call someone "Unfortunately, Phone has stopped" pop up. Then i installed BLISS 6.2 ROM. Dialer issue was fixed but BATTERY backup was so POOR. In a standby mode i got 3 hours of battery and that's not it after using 3 to 4 hours system UI start lagging and getting unable to use. Thing is my friend DEVICE is ASUS ZE551ML 2GB is used the same method and same rom but his one is completely perfect and no issue at all. I don't what's wrong with mine. Would be pleasure if anyone can solve it.
Click to expand...
Click to collapse
Hello
Thanks for feedback
First of all you shouldn't open a thread for a bug cm is fixes all bugs one by one and nightlies are not testing before releasing so u should wait for fixing
And For Bliss
Bliss and almost all other roms have poor battery but we are trying to fix that battery thing
If you are using latest bliss build u can except some weird issues because bliss had some bugs and now they gone but until new build(official one) don't except too much thing from bliss i am going to release an ALPHA build u can try that one after releasing and i don't have a ZE550 for testing

[Issue] Boundless Reboot Loop on LineageOS 13.0 Android 6.xx ROM

Hello , everyone
First i wanna thank this guy for posting this ROM
The ROM was installed correctly and worked fine a long time even though , there're some mini issues showen like (system has been stopped / Mail has been stopped) I've made some settings to get ride of Mail has been stopped (Disable it and Delete it after )
But when i've kept my phone on charging in the night and woke up for checking it , it's only some secondes before the system shutdown without reason without even showing something else and this reboot loop continue and i can't use my phone anymore Please help me out ..

did you manage to solve it?
tberma said:
Hello , everyone
First i wanna thank this guy for posting this ROM
The ROM was installed correctly and worked fine a long time even though , there're some mini issues showen like (system has been stopped / Mail has been stopped) I've made some settings to get ride of Mail has been stopped (Disable it and Delete it after )
But when i've kept my phone on charging in the night and woke up for checking it , it's only some secondes before the system shutdown without reason without even showing something else and this reboot loop continue and i can't use my phone anymore Please help me out ..
Click to expand...
Click to collapse
I'm facing the same issue and I dont know what to do! I tried several ROMs, and problem persists!

ggonmar said:
I'm facing the same issue and I dont know what to do! I tried several ROMs, and problem persists!
Click to expand...
Click to collapse
The problem is because of a bug between the upgraded android app and CM based ROMs.
Since the problem hasn't been solved on either part. people are experiencing this on many other devices that are running CM based ROMs. Use any other ROM and you should be fine.

I too faced this problem, when I had marshmallow. Then I switched to Android KitKat ( This one https://forum.xda-developers.com/showthread.php?t=2627818 to be specific )and my phone is perfect now. Maybe galaxy grand cant handle ROMs above KitKat. I think any KitKat variant will be fine.

kundank191 said:
I too faced this problem, when I had marshmallow. Then I switched to Android KitKat ( This one https://forum.xda-developers.com/showthread.php?t=2627818 to be specific )and my phone is perfect now. Maybe galaxy grand cant handle ROMs above KitKat. I think any KitKat variant will be fine.
Click to expand...
Click to collapse
Aosp 6.0 Works fine, No bootloop like on other CM based ROMs, it's CM compatibility issue here is the link for others who want to stick to Marshmallow, this one is very stable for daily driver.

I think I have an answer. The culprit is your battery. Try a new battery and see if the problem exists. With the passage of time, the battery degrades and is no longer able to support demanding ROMs and thus the mobile shuts down.

Required : Opinions for Pixel Experience Rom

Hello Guys, I just bought a Lenovo Z2 Plus and wanted to install a custom rom on it. I did my thorough research through XDA and Youtube about various OREO based custom roms available for this phone. I like the Pixel Experience Rom but I am a newbie in flashing custom roms. I read in few threads about network connectivity issues in the Pixel Experience Rom and Resurrection Remix rom as well. In few of the youtube videos, I saw that the battery backup and Antutu score of Pixel Experience rom is marginally lower when compared to Resurrection Remix.
Can you guys give me your opinion on which rom should I install on my stock device. Kindly please provide the respective rom's Antutu Benchmark scores and Screen On Time especially for the Pixel Experience Rom. Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Thanks.

I have tried the PE (Pixel Exp) ROM and here my observations on that.
The Good
Extremely fluid. Performance is mind blowing. I have tried 3 Custom ROM so far (AEX, RR, PE) and PE felt the best performing in terms day to day device usage. Feels like PE is meant for Z2 Plus and vise versa. Everything works out of the box, GApps are preloaded, ROM is simple but very effective. All sensors, every piece of hardware included in the phone works perfectly. I never felt it was a custom rom, felt like meant for Z2 Plus.
The Bad
Not just just pixel, this is present in all Custom ROM for me and my device. I am from India, and using Reliance Jio VoLTE.
Now the problem is network reception isn't as good as stock ZUI.
The 2.4GHz WiFi got limited to 72 mbps only. Stock ZUI has no problem, tried changing few ROMs and finally settled with AEX which I see can connect to 2.4GHz WiFi and 150 mbps. I have tried baseband 1.76 (ZUI 2.5.104 ST India) and baseband 1.70 (Latest) for ZUI 3.5.3xx China. Nothing seems to help. Out of 4 ROM, Stock ZUI (2.5/3.5), PE, RR, AEX, only ZUI and AEX are able to give me a 150 mbps wifi link speed.
Now regarding the VoLTE reception. VoLTE works fine but network is fluctuating like hell. For me, the same is present in all three custom rom I have tried. AEX, RR, PE. Tried baseband 1.70/1.76 but couldn't solve it. There are no call drops but network isn't stable at all. Tested with Reliance Jio NetVelocity app for detailed information and it seems with none of the Custom ROM, Phone is able to sustain a stable 2300 MHz link. Falls back to 1800 MHz and 850 MHz randomly. Network speed wasn't bad, infact I would say satisfactory.
Only ZUI seems to have a stable Jio reception for me.
The Ugly
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Presently using AEX ROM without any extra modification. Performance isnt as fuild as Pixel ROM but less problematic than others. Infact only ROM allowing me a 150mbps WiFi link speed.
Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Follow this guide to unlock the bootloader and install TWRP. Then installation processor of ROM will depend on which ROM you select. Note, there are two different ROM type now. 1. Full Treble 2. Non Treble. Installation process are different for them.
Pixel is a non treble ROM. Like 2 years ago, you would feel similar setup process.
If you chose Pixel, after you have unlocked and got TWRP installed,
1. download PE ROM
2. boot into TWRP
3. Wipe system, data, cache, dalvik
4. Flash ROM
5. Wipe Cache
6. Reboot
If all went ok, frist boot will take a few minutes and you will be asked to setup your Google Account under Pixel Exp ROM.
Remember, I am not an expert so wait for others to comment and guide you !! Just sharing from my personal experience !!
Good luck.

NaXal said:
I have tried the PE (Pixel Exp) ROM and here my observations on that.
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Click to expand...
Click to collapse
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?

4tanmoy said:
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.

@4tanmoy
One small mistake from my end. PE ROM comes with GApps included. So when you flash PE ROM, you don't need to Flash GApps again.

NaXal said:
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
Click to expand...
Click to collapse
thanks

4tanmoy said:
thanks
Click to expand...
Click to collapse
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?

NaXal said:
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
Click to expand...
Click to collapse
Yes, I did some more research. Flashed PE with UberCool.
After Setup, I flashed AR Kernal and SuperSu.
Installed Google Camera Mod for HDR+ and Potrait Modes.
Flashed Dialer Fix to resolve the dialer problem as it showed that phone is not supported when launching dialer. now fixed.
The PE ui is butter smooth, phone doesnot heats anymore. Charged last night till 100 % and browsed youtube, downloaded my preferred apps from play store, browsed quora for 30 mins, took some pictures. In the morning I played subway surfers, clash royal, some web browsing, downloaded all remaining apps for my phone. The battery is now 59% while I typing this from the phone.
Overall, I am astonished by the PE smoothness and completely satisfied by the battery life.

Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol

NaXal said:
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
Click to expand...
Click to collapse
the wifi link speed is 72 mbps and about battery drainage overnight, i'll post tomorrow morning

regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.

4tanmoy said:
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
Click to expand...
Click to collapse
Thanks for the reply.
Your data is very similar to what I have experienced with Pixel ROM.
This drainage is one of the issue for which I had to move out of Pixel ROM

Excellent review, I too installed PE and is enjoying every bit of Pixel, but the main problem I am facing is ,my phone's all sensors are dead or not working has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Would like ask someone from the forum to please help me to fix the isaue, as far as Custom rom in Zuk 2 I will stick to Pixel as it is the best till now what ever I have used . I have TWRP installed has flashed sensor.zip available in the Zuk Forum but nothing seems to work.
Waiting for a reply from the forum members it they take out sometime to help a man is distress.

Kamal_halder said:
has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Click to expand...
Click to collapse
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!

NaXal said:
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
Click to expand...
Click to collapse
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .

Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
If the issue is present with stock ROM also with bone stock phone, then it feels that the issue is with the Hardware.
Anyway, hope you find a solution and if you do, pls post that so that for reference if later down the some one needs he can fix his issue.

Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.

Lankapatiraawan said:
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Click to expand...
Click to collapse
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .

Kamal_halder said:
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Click to expand...
Click to collapse
How much for the display change?
I got a friend with cracked 3GB variant needing a display change. Just taking an idea about approximately how much you spent for this change

Question Realme UI 4 Beta

Anyone tried it?

I got the update via OTA and installed it on Monday. Runs super well and smoothly. I'm not signed up for the beta program.

i also received update yesterday via OTA..and i'm also not signed in beta program... work smootlhy for now. Funny...until this update i must update always only over VPN provider

Some bugs I've found in this beta:
DT2W sometimes doesn't work
Random screen flickering
Phone gets hotter

mh ihave non of this bugs

What version of realme GT ME do you have?

3363 Have now tested it for a few days and found no bugs. since the update my battery life has also improved. Before the update I had to load every 2 days. Now after 2 days I am at 60% if I do not use the device often.

In realme ui 4.0 we can not update the system apps ???
When you enter in the app information dont exist anymore the three dots in top right corner to uninstall the update.......and after this update with apk versions...???

josito_theDH said:
Some bugs I've found in this beta:
DT2W sometimes doesn't work
Random screen flickering
Phone gets hotter
Click to expand...
Click to collapse
Did you make phone reset after update?

Milanche78 said:
Did you make phone reset after update?
Click to expand...
Click to collapse
Yes
But this are confirmed bugs on realme forum

can i go back to stock rom using this?i'm in custom rom but im in RUI4 before custom rom. I just wanna go back if my network will be fixed because the network in custom roms is unstable

Use qfil to flash stock frimware with edl mode, but look carefully at this guide and do exactly

josito_theDH said:
Yes
But this are confirmed bugs on realme forum
Click to expand...
Click to collapse
My friend , you say that those are confirmed bugs on realme forum , most likely the indian region phone model on an indian forum . I don't confirm any of those bugs , had a dirty install (without cache wipe/reset) with no issues and also made a clean install for testing purpose . No heating , no batery drains , no screen flickering and no 5g connectivity issues at all . Phone in discussion is rmx3363 (EU model) on Rui4 with more than an month of usage on the beta software. You should take the phone to a service or at least test-it with another sim installed (for me vodafone 5g is great) i've got the same feedback for both 6/128 and 8/256 mainboards

Skilly1989 said:
My friend , you say that those are confirmed bugs on realme forum , most likely the indian region phone model on an indian forum . I don't confirm any of those bugs , had a dirty install (without cache wipe/reset) with no issues and also made a clean install for testing purpose . No heating , no batery drains , no screen flickering and no 5g connectivity issues at all . Phone in discussion is rmx3363 (EU model) on Rui4 with more than an month of usage on the beta software. You should take the phone to a service or at least test-it with another sim installed (for me vodafone 5g is great) i've got the same feedback for both 6/128 and 8/256 mainboards
Click to expand...
Click to collapse
I dont have this issues also on 3360,
Can you tell me what the normal battery backup for this phone ?
I usually get 6+ of screen on time over a 24h normal usage no video watching

sym_m said:
I dont have this issues also on 3360,
Can you tell me what the normal battery backup for this phone ?
I usually get 6+ of screen on time over a 24h normal usage no video watching
Click to expand...
Click to collapse
12-48h usage with 8-4h SOT