Related
DISCLAMER and WARNING: I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or the current economic crisis. Please do some research if you have any concerns about this app.
Click to expand...
Click to collapse
Story:
Just received Sony Smartwatch 3 and decided to oem unlock for future so once root available I would not need to reset device.
Enabled adb
manually specified correct drivers in device manager
rebooted to bootloader using adb reboot bootloader
entered fastboot oem unlock twice and watch rebooted
but got stuck on boot for whatever reason.
I tried all the methods to get into fastboot (Swiping diagonal as on LG watch, and together with power button as on samsung ) to no avail.
The only other mode I was able to get into - s1 flash device w/o drivers.
Found Sony Emma software to work with unlocked Xperia, and after its installation it said that bootloader is locked and I need to either update from sony site or unlock bootloader first!
Installed Sony PC Companion software, but software update while listing smartwatch 3 said that there is no firmware for it.
After googling random forums on bootlooping sony xperias found that to reset device you need to click "repair my phone/tablet" in Phone/Tablet Software Update section
Click to expand...
Click to collapse
Guide to unbrick bootlooping SWR50 that is able to get into s1 bootloader/flash mode:
1. Power off device by holding power key until it reboots and then switches off with few vibrations
2. Connect to computer and check device manager - you should see unknown device
3. Install Sony PC Companion from this website http://www.sonymobile.com/us/tools/pc-companion/
Check if driver appeared in the Device Manager, e.g. unknown device will disappear and something like SEFLash will appear under usb controllers
If driver is still not found - try to install Emma (http://developer.sonymobile.com/services/flash-tool/) and get this driver to work
4. Go into PC Companion and click on "Support Zone", it will be downloaded
5. Then click on "Accessories software update" and try to update Smartwatch 3 (We might get new versions in the future, so it will be easiest to do so)
UPDATE: Now you can reflash from Accessories page, it will ask if you want to refrlash. Keeping steps bellow for information purposes.
6. If #5 not working:
Click on "Phone/Tablet Software Update" (yes, silly), click on "repair my phone/tablet", click Continue and Agree to all licenses, etc....
7. Once presented by the list of phones - Select anything I guess, but I selected Xperia Z2, it should start downloading and then updating.
8. Once done it will say build number watch was flashed, in my case it was KNX01V
9. Disconnect watch and boot it.
P.S. I guess they show phone selection just to provide instructions how to get into download mode and then flash based on the versions from bootloader.
P.P.S I'm glad I tried this last resort thing after being ready to deal with verizon support and waiting for new watch...
I've found that formatting cache and userdata partition like it says in the link below makes the device boot as expected:
source.android.com -> /source/building-devices.html#unlocking-the-bootloader
(sorry for faulty link, new user)
Good to know, I decided to wait a bit as I was eager to play with new toy.
Will unlock tomorrow if it is still locked after Sony reset.
And looks like I would have to write my own apps to test GPS and sensors performance.
And the good news is fastboot state unlocked after stock reflash.
XorZone said:
manually specified correct drivers in device manager
Click to expand...
Click to collapse
Can you please elaborate on which driver you used to get access to the Smartwatch 3 via ADB? I am trying to use the latest google USB driver, but the device is showing up as offline listed under "adb devices". Just tried the latest ADB v1.0.32 and it seems the watch shows up as "unauthorized". Did you see an ADB notification on the watch that you had to accept, because I am not seeing anything like that.
NVM, it started working after I restarted adb server like 25 times...
Device offline usually is not about driver. But I hit on device and manually picked google-adb composite device
OK, bricked watch today with corrupted /system and boot process hanged with non responsive power button. Had to wait for discharge and it was pita to get into flashmode with enough juice, because after black screen charging it boots instead of going into kernel charging.
Anyway it is up and running and has ROOT now!
Will upload files and create guide as soon as I will be with good internet.
See my sig!
*delete*
*deleted*
Well, there are different levels of bootloaders
At least Sony s1 flash, fastboot, kernel...
To flash with PC companion you need to boot into s1 by powering off and then hold power and connect to USB once sony logo shown (you should see black screen with backlight on). Make sure you sit on PC companion update screen and that watch had enough juice.
With charging there are different levels of charging:
1. Battery dead
2. Boot loader charging (about 4 min from USB port) with black screen
3. Kernel charging either offline (if you powered off before) or boot and operational charging.
When #2 charges it will boot kernel and if kernel or system is broken it might hang and discharge.
But you can force into s1 flash mode before it boots into kernel. Or if you lucky you could power on and power off before it boots and hang.
In my case I had not enough juice to flash it and watch didn't react to button in kernel mode, so I had to wait for discharge, then plugged into USB and start timer, figured it boots after ~3min 55sec. So I opened PC companion update screen, waited 3:53 and disconnected watch, then hold power button and connect to PC after 5 sec and was able to flash.
To power off - just hold power button until it reboots and continue holding until it vibrates 3 times.
Good luck
XorZone said:
Story:
Guide to unbrick bootlooping SWR50 that is able to get into s1 bootloader/flash mode:
1. Power off device by holding power key until it reboots and then switches off with few vibrations
2. Connect to computer and check device manager - you should see unknown device
3. Install Sony PC Companion from this website http://www.sonymobile.com/us/tools/pc-companion/
Check if driver appeared in the Device Manager, e.g. unknown device will disappear and something like SEFLash will appear under usb controllers
If driver is still not found - try to install Emma (http://developer.sonymobile.com/services/flash-tool/) and get this driver to work
4. Go into PC Companion and click on "Support Zone", it will be downloaded
5. Then click on "Accessories software update" and try to update Smartwatch 3 (We might get new versions in the future, so it will be easiest to do so)
UPDATE: Now you can reflash from Accessories page, it will ask if you want to refrlash. Keeping steps bellow for information purposes.
6. If #5 not working:
Click on "Phone/Tablet Software Update" (yes, silly), click on "repair my phone/tablet", click Continue and Agree to all licenses, etc....
7. Once presented by the list of phones - Select anything I guess, but I selected Xperia Z2, it should start downloading and then updating.
8. Once done it will say build number watch was flashed, in my case it was KNX01V
9. Disconnect watch and boot it.
P.S. I guess they show phone selection just to provide instructions how to get into download mode and then flash based on the versions from bootloader.
P.P.S I'm glad I tried this last resort thing after being ready to deal with verizon support and waiting for new watch...
Click to expand...
Click to collapse
This method is windows only. Is there no cross-platform way to do it?
I did the stupid thing.. and ended up with a softbricked phone.
Sony PC Companion did the trick for me!
I tried doing it through VMWare on my macbook, but didn't seem to work at all.
On windows it was plug'n'Pray
Sony companion will not let me restore my SW50. Detects it and tells me that the software is updated. If I try from the menu to repair phone, it makes me accept all agreements and finally tells me the same thing no updates.
Is in bootloop and do not start after open bootloader
My sw3 is in bootloop.I uesd your guide but still can't repair my watch. I tried many time to use pc companion but always got the same wrong message,wrong code(100) which couldn't connect to the Internet.
@swidon @KONG8691
I find myself in the same situation, you have found a solution to the problem?
Thanks for your help
best regards
jerry_italia said:
@swidon @KONG8691
I find myself in the same situation, you have found a solution to the problem?
Thanks for your help
best regards
Click to expand...
Click to collapse
Yes!, follow these instructions and you can enter in fastboot or recovery and flash a new firmware:
Detach any USB cable connected to the watch
Turn it off holding the power button and keep holding the button until the watch vibrates three times and then switches it off
Press the power button and keep holding. A blue screen that prompts to insert an USB cable will display
Double tap the power button
A black menu will display, with on-screen instructions
Move to Fastboot or Recovery Mode pressing the power button, once a time
Select Fastboot (or Recovery) by double pressing the power button
Good luck bro.
swidon said:
Yes!, follow these instructions and you can enter in fastboot or recovery and flash a new firmware:
Detach any USB cable connected to the watch
Turn it off holding the power button and keep holding the button until the watch vibrates three times and then switches it off
Press the power button and keep holding. A blue screen that prompts to insert an USB cable will display
Double tap the power button
A black menu will display, with on-screen instructions
Move to Fastboot or Recovery Mode pressing the power button, once a time
Select Fastboot (or Recovery) by double pressing the power button
Good luck bro.
Click to expand...
Click to collapse
you are my hero... stock recovery flashed and sw3 reboot! thankyou so much bro
jerry_italia said:
you are my hero... stock recovery flashed and sw3 reboot! thankyou so much bro
Click to expand...
Click to collapse
How do you go about getting stock recovery back at the moment I'm on 5.0.1 and I can't ota update to 5.1.1 because it thinks its on 5.1.1 when it's not the only way I can think of updating it is to get stock recovery then sideload the ota zip on stock recovert but I can't do that with TWRP can someone help?
Hi,
My watch boot loops on the marshmelow boot animation after I Got marshmelow
I tried XorZone instractions and it said it re-updated image. but it will boot looped.
I tried to factory reset from the menu (double tap at download screen then go factory reset).... didn't work. still boot loops.
I see I can go to fastboot or recovery, but what do I do there? Any instructions I can follow to try to revive my watch please? thanks.
wonderfull!
XorZone said:
Well, there are different levels of bootloaders
At least Sony s1 flash, fastboot, kernel...
To flash with PC companion you need to boot into s1 by powering off and then hold power and connect to USB once sony logo shown (you should see black screen with backlight on). Make sure you sit on PC companion update screen and that watch had enough juice.
With charging there are different levels of charging:
1. Battery dead
2. Boot loader charging (about 4 min from USB port) with black screen
3. Kernel charging either offline (if you powered off before) or boot and operational charging.
When #2 charges it will boot kernel and if kernel or system is broken it might hang and discharge.
But you can force into s1 flash mode before it boots into kernel. Or if you lucky you could power on and power off before it boots and hang.
In my case I had not enough juice to flash it and watch didn't react to button in kernel mode, so I had to wait for discharge, then plugged into USB and start timer, figured it boots after ~3min 55sec. So I opened PC companion update screen, waited 3:53 and disconnected watch, then hold power button and connect to PC after 5 sec and was able to flash.
To power off - just hold power button until it reboots and continue holding until it vibrates 3 times.
Good luck
Click to expand...
Click to collapse
Hello Everyone
TL;DR Screen doesn't come on at all, battery led only flashes while it is rebooting (More details below), and When plugged in to my windows pc, a bunch of "Local Disk Found" pop up, some of the volumes I can access, most I cannot.
I have searched and searched the internet the past 24 for solutions, and have yet to find one. So imma walk you through what led up to the issue, as well what solutions I have tried.
Yesterday while I was trying to update my rom, I ended up getting stuck in what I thought was a boot loop. I then decided to hard reset my phone and go into recovery in hope to try to reinstall the rom. To my surprise, I could not access the internal sd card in the phone. Data was unmounted in the "Mount" settings and I could not what so ever remount it. After this I tried to side load it, but to no avail.
In response to all my attempts to fix the phone at that point, in frustration, I just said "**** it" and went into factory reset in the bootloader. This is where the hard brick happened. At this point, the screen would not come one, and the battery led was not lit when plugged in. I tried letting my phone charge over night and then, tried the "Battery Recalibrate method". I then tried the "Hold Pwr + Volume up for 10 seconds, then Power + volume Down until you access the bootloader"
After that, I then thought that the firmware was corrupted, so I tried to see if I could push an img to the phone, however fastboot does not see the device. I tried RUU, it does not see the device. I tried the HTC Unbrick method by Dexter that required me to install ubuntu and do some things in terminal, that also did not find the device. And here I am stuck. One thing unique to my situation that I have yet seen reported in the countless threads I have searched, is that when I plug my phone to my pc, a large amount of disk drives are found. Most of them are not accessible, but there are a couple that I can go in and see files for. Windows asks me if I want to format the ones I can't access. When hooked to my pc, I tried the the Power + volume button combinations, the only thing that seems to happen off of this is that my phone seems to reboots, and the battery indicator briefly shows.
Anyways, this is all I can remember. Any help would be GREATLY appreciated. I don't really think it is a hardware related issue since my phone does somewhat boot. However it seems it can't get to a bootloader what so ever.
Try holding power and vol up for a long time, like a minute or more. Try with and without charger attached, and after sitting on charger overnight.
If the bootloader is intact, the phone is likely not truly bricked (recoverable). And I don't see how you could have damaged hboot by the actions you mentioned.
What is the phone's original CID (carrier version) and are you s-on or s-off?
redpoint73 said:
Try holding power and vol up for a long time, like a minute or more. Try with and without charger attached, and after sitting on charger overnight.
If the bootloader is intact, the phone is likely not truly bricked (recoverable). And I don't see how you could have damaged hboot by the actions you mentioned.
What is the phone's original CID (carrier version) and are you s-on or s-off?
Click to expand...
Click to collapse
Verizon is the carrier version, and I am s-off.
Held vol + up for 5 minutes both with and without the charger. One time with the charger into my computer, and another into the wall. When it was in my pc, I can tell its doing nothing but rebooting over and over by the notification sound, and the constant "Found new disk" notifications I got. However still no luck, no screen turns on, no sign of hboot. I'm hoping to have some luck after leaving it on charge overnight and trying again.
TheBizkit said:
Held vol + up for 5 minutes both with and without the charger. One time with the charger into my computer, and another into the wall. When it was in my pc, I can tell its doing nothing but rebooting over and over by the notification sound, and the constant "Found new disk" notifications I got. However still no luck, no screen turns on, no sign of hboot. I'm hoping to have some luck after leaving it on charge overnight and trying again.
Click to expand...
Click to collapse
So still nothing after leaving it on charge overnight and I held vol + up for about 5 minutes. Things seem grim.
I think the proper thing to do when you discovered internal storage was not mountable, would have been to use the TWRP option to format internal storage (in Advanced Wipe options).
But now I'm baffled as to what happened that would have rendered the phone unable to boot into fastboot mode. Fastboot won't recognize the device if you can't boot into fastboot mode, which leaves use kinda stuck.
So you didn't try to flash anything during the course of all this troubleshooting?
What you did - "Hold Pwr + Volume up for 10 seconds, then Power + volume Down until you access the bootloader" is totally wrong
I used to get this bunch of local disk pop-up and this is how I get out the problem
Connect the device to pc, you can hear notification sound on pc that device is connected. Ignore all those bunch of local disk pop-up
Press & hold both power button & volume up button until you hear another notification sound that device is disconnected from PC (that's the indication that device is restarted)
Release both power & volume up button and quickly press & hold volume down button (only this one button)
This should get you on bootloader
redpoint73 said:
I think the proper thing to do when you discovered internal storage was not mountable, would have been to use the TWRP option to format internal storage (in Advanced Wipe options).
But now I'm baffled as to what happened that would have rendered the phone unable to boot into fastboot mode. Fastboot won't recognize the device if you can't boot into fastboot mode, which leaves use kinda stuck.
So you didn't try to flash anything during the course of all this troubleshooting?
Click to expand...
Click to collapse
No, nothing was flashed except the original Rom update that got this snowball rolling (Not saying its the roms fault, most likely mine).
ckpv5 said:
What you did - "Hold Pwr + Volume up for 10 seconds, then Power + volume Down until you access the bootloader" is totally wrong
I used to get this bunch of local disk pop-up and this is how I get out the problem
Connect the device to pc, you can hear notification sound on pc that device is connected. Ignore all those bunch of local disk pop-up
Press & hold both power button & volume up button until you hear another notification sound that device is disconnected from PC (that's the indication that device is restarted)
Release both power & volume up button and quickly press & hold volume down button (only this one button)
This should get you on bootloader
Click to expand...
Click to collapse
This is the one combination I forgot to mention in the op, sorry for that.
But I have tried this, before and after your post, still no luck.
If it worth mentioning, I can just hold power + down and it still reboots over and over. As well as just power. As a matter of fact, all button combinations reboot the phone over and over.
TheBizkit said:
If it worth mentioning, I can just hold power + down and it still reboots over and over. As well as just power. As a matter of fact, all button combinations reboot the phone over and over.
Click to expand...
Click to collapse
I thought the screen was dead? If so, how do you know its rebooting?
redpoint73 said:
I thought the screen was dead? If so, how do you know its rebooting?
Click to expand...
Click to collapse
By it constantly connecting and disconnecting from my pc. If that doesn't mean its rebooting, then I guess I'm mistaken.
TheBizkit said:
By it constantly connecting and disconnecting from my pc. If that doesn't mean its rebooting, then I guess I'm mistaken.
Click to expand...
Click to collapse
Well, it might mean that.
If it in fact is rebooting over and over on its won, simply holding the vol down button for a long time, should put you into bootloader (on the next reboot "cycle"). Again, assuming it is in fact rebooting, and that bootloader is intact.
Good morning,
When I start my tablet, I remain stuck on the LG logo ...
I can't connect my Pc with lg pc suite or Lg mobile support tool or flashtool.....
Can you help me please ?
Thanks
Edit 07/05 : i got the message on boot ; Secure booting error! Cause : boot certification verify
Eric
I just went thru this with my a G Pad 8.0, had quite a few hangups but I ended up figuring it out. Some suggestions from what I learned... :
- Fully charge up your tablet. Mine was charging extremely slow, so I left it plugged in overnight and that finally ended up doing the trick.
- Make sure you have the correct driver installed. If you go to LG's website and find their downloads section, you can search for your device and download its driver. I'm pretty sure their tablet driver isn't device specific, but so if you have any difficulty finding this, let me know and I can post the one that worked for me. After you download the file, don't forget to open and install it. While you're there, you can I'd just go ahead and re-download and reinstall their mobile support tool, just to make sure you've got the most current update. After it installs, open the program; I don't know if you have to, please let but I'd have it open and waiting before you do these next steps.
- Completely power off your device. Unplug it from the wall and turn it off. I found that if I just held down the power button until the screen went dark, my tablet 3would restart itself a few seconds later. But when I kept holding down the power bites dxton thru the reset, it would turn off a 2nd time and actually stay off (about 15sec or so).
- In order to run LG's support tool, you'll wanna boot into download mode. You can search for your device online and it should explain how to do this, I found a couple conflicting methods but I believe the one that worked for me was just by holding the volume up key and then plugging it in to your PC with a USB. If that doesn't work, try pressing the volume up and power keys together then plugging it in, or try pressing both of the volume keys. One of those 3 should have you entering download mode. It will take a few seconds after you attach the cord for you to boot up; keep holding down the keys you pressed until you see the download mode screen. When plugging it in, but I it might be easier to keep holding down the buttons if you start with the cord plugged into your powered off device, and and then plug the other end into your PC while you are doing the boot process. It shouldn't matter which end you connect last, and I found this method to be way less awkward.
- The LG mobile support tool should automatically recognize your device and automatically start the update, and but you might need to select your device yourself, or at least the service provider, in order to update correctly. Just DON'T unplug your tablet thru the entire process. I think the whole thing took me about 15 minutes, depends on your Internet speed really.
- if you've managed to successfully run the update and you're still stuck in a boot loop, you're gonna have to reset your device. Again, you can Google how to do this, but I think most LG's perform a hard reset by making sure the phone is turned off, then press and hold the power and volume down keys. When the LG logo appears, release the power key for a second while still holding down the volume key, and then press and hold power down again until you see the reset screen. Use your volume and power keys to factory reset your device.
Hopefully, now it is should be able to boot just fine! Let me know if you encounter any problems and I'll see what I can do to help.
Hi, thanks for your help sheebie, i'll try asap .
Regards
Eric
sheebie said:
I just went thru this with my a G Pad 8.0, had quite a few hangups but I ended up figuring it out. Some suggestions from what I learned... :
- Fully charge up your tablet. Mine was charging extremely slow, so I left it plugged in overnight and that finally ended up doing the trick.
- Make sure you have the correct driver installed. If you go to LG's website and find their downloads section, you can search for your device and download its driver. I'm pretty sure their tablet driver isn't device specific, but so if you have any difficulty finding this, let me know and I can post the one that worked for me. After you download the file, don't forget to open and install it. While you're there, you can I'd just go ahead and re-download and reinstall their mobile support tool, just to make sure you've got the most current update. After it installs, open the program; I don't know if you have to, please let but I'd have it open and waiting before you do these next steps.
- Completely power off your device. Unplug it from the wall and turn it off. I found that if I just held down the power button until the screen went dark, my tablet 3would restart itself a few seconds later. But when I kept holding down the power bites dxton thru the reset, it would turn off a 2nd time and actually stay off (about 15sec or so).
- In order to run LG's support tool, you'll wanna boot into download mode. You can search for your device online and it should explain how to do this, I found a couple conflicting methods but I believe the one that worked for me was just by holding the volume up key and then plugging it in to your PC with a USB. If that doesn't work, try pressing the volume up and power keys together then plugging it in, or try pressing both of the volume keys. One of those 3 should have you entering download mode. It will take a few seconds after you attach the cord for you to boot up; keep holding down the keys you pressed until you see the download mode screen. When plugging it in, but I it might be easier to keep holding down the buttons if you start with the cord plugged into your powered off device, and and then plug the other end into your PC while you are doing the boot process. It shouldn't matter which end you connect last, and I found this method to be way less awkward.
- The LG mobile support tool should automatically recognize your device and automatically start the update, and but you might need to select your device yourself, or at least the service provider, in order to update correctly. Just DON'T unplug your tablet thru the entire process. I think the whole thing took me about 15 minutes, depends on your Internet speed really.
- if you've managed to successfully run the update and you're still stuck in a boot loop, you're gonna have to reset your device. Again, you can Google how to do this, but I think most LG's perform a hard reset by making sure the phone is turned off, then press and hold the power and volume down keys. When the LG logo appears, release the power key for a second while still holding down the volume key, and then press and hold power down again until you see the reset screen. Use your volume and power keys to factory reset your device.
Hopefully, now it is should be able to boot just fine! Let me know if you encounter any problems and I'll see what I can do to help.
Click to expand...
Click to collapse
Hi all.
Unfortunatelly my Galaxy Tab S (sm-t700) fell on the floor and the result is that the screen is cracked (three very long cracks) and the screen does not work anymore. The device seems sitll to be functioning because when I push the power button the tablet reacts, it emits the usual sounds, but the screen is all black.
I will decide whether to get the screen repaired or simply substitute the device. In any case, I would like to reset the device so that I can avoid to worry that somebody can hack it and enter in my accounts via the tablet.
Is there a way to reset the tablet without the necessity of looking at the screen? (e.g., a particular combination of buttons, or connecting the tablet to the PC (but I cannot install apps on the tablet by looking at the screen)). At the moment the tablet seems to be in the "standby" mode, i.e., when I push the power button the lockscreen would appear (if the screen worked).
Thank you very much for your help.
Assume you know how to use Odin to flash the stock firmware.
Power+ Volume Down will reboot the tablet, assume it's on.
Power+ Volume Down, wait 5 seconds, then Power+ Volume Down+ Home, wait to 10 to 15 seconds. If you do correctly, it will go to Warning Screen, then Volume Up to go to Download or Odin mode.
Make sure you open Odin first and load all 3 files: BL, AP, and CSC. Odin should detect the tablet in download mode, click Start, the process should show it's running.
If nothing happen, you should try again previous steps. This is a trial and error as you cannot see the display.
When it finishes, 5 minutes is max, you should rest assure that your tablet was fully erased and fresh with system as out of the box.
Beut said:
Assume you know how to use Odin to flash the stock firmware.
Power+ Volume Down will reboot the tablet, assume it's on.
Power+ Volume Down, wait 5 seconds, then Power+ Volume Down+ Home, wait to 10 to 15 seconds. If you do correctly, it will go to Warning Screen, then Volume Up to go to Download or Odin mode.
Make sure you open Odin first and load all 3 files: BL, AP, and CSC. Odin should detect the tablet in download mode, click Start, the process should show it's running.
If nothing happen, you should try again previous steps. This is a trial and error as you cannot see the display.
When it finishes, 5 minutes is max, you should rest assure that your tablet was fully erased and fresh with system as out of the box.
Click to expand...
Click to collapse
Thank you very much for your suggestion. At the moment I don't know how to use Odin but I will look for some documentiation (at least now I know what to look for :good
Hi there. After (an attempt) to unlock the bootloader of my A50 and installing TWRP Recovery (TWRP_A50_Magisk_Prepatched) i find myself in an orange bootstate. I can't get it into recovery, download or fastboot mode. It seems like a full brick. I can't even power off the device. Only Volume up, Volume down and Power button let's the device reboot but then the same boot problems appear. Is there anything i can do to recover my phone?
Text of first screen when booting up:
"The phone's bootloader is unlocked and it's software integrity can't be verified. Andy data on this phone may be vulnerable to attackers. Don't store any important or sensitive information on this phone". Press power key to continue"
Text of second screen when booting up:
"The phone is not running Samsung's official software. You may have problems with features or security and you won't be able to install software updates"
Any ideas!?
flash stock via odin
nikolas60 said:
flash stock via odin
Click to expand...
Click to collapse
I have the same problem described as above. To use odin you need access to the download menu. Personally, i can not even access the download menu using any cobination of volume up-down & power combination...
RestrictedPower said:
I have the same problem described as above. To use odin you need access to the download menu. Personally, i can not even access the download menu using any cobination of volume up-down & power combination...
Click to expand...
Click to collapse
caztricum said:
Hi there. After (an attempt) to unlock the bootloader of my A50 and installing TWRP Recovery (TWRP_A50_Magisk_Prepatched) i find myself in an orange bootstate. I can't get it into recovery, download or fastboot mode. It seems like a full brick. I can't even power off the device. Only Volume up, Volume down and Power button let's the device reboot but then the same boot problems appear. Is there anything i can do to recover my phone?
Text of first screen when booting up:
"The phone's bootloader is unlocked and it's software integrity can't be verified. Andy data on this phone may be vulnerable to attackers. Don't store any important or sensitive information on this phone". Press power key to continue"
Text of second screen when booting up:
"The phone is not running Samsung's official software. You may have problems with features or security and you won't be able to install software updates"
Any ideas!?
Click to expand...
Click to collapse
Try connecting your phone to your PC with the USB Type C cable, and do VolDown + Power to reboot the phone, and the moment the screen turns black, press VolUp + VolDown. It'll bring you to a different screen where you can press VolUp to go into download mode for flashing the stock firmware via Odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
jtanhw said:
Try connecting your phone to your PC with the USB Type C cable, and do VolDown + Power to reboot the phone, and the moment the screen turns black, press VolUp + VolDown. It'll bring you to a different screen where you can press VolUp to go into download mode for flashing the stock firmware via Odin. I got my stock firmware from (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
This did it for me! Many thanks...
jtanhw said:
download mode for flashing the stock firmware via Odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
I had the same problem and managed to get back to the Download Page.
How do I find out what is the correct region of the correct Modem Version of my phone? It's an S10 (intl unlocked) that I bought in the US from Amazon.
TheAsker70 said:
I had the same problem and managed to get back to the Download Page.
How do I find out what is the correct region of the correct Modem Version of my phone? It's an S10 (intl unlocked) that I bought in the US from Amazon.
Click to expand...
Click to collapse
You can find answers in the S10 forum. But I think the steps will be the same (this is A8 device/forum).
Rexton270 said:
You can find answers in the S10 forum. But I think the steps will be the same (this is A8 device/forum).
Click to expand...
Click to collapse
My bad. Apologize. Will head over there. Thanks!
No bother. Hope you are sorted by now.
this is the exact same problem that goes for me with my samsung a505gn, i flashed a twrp 3.3.1-2_zvox and im stuck at this state. i found my stock firmware at the link provided above, but there are multiple types of a505gn stock firmware (XTC, SMA, GLB), question is, how do i know the correct type of stock firmware to reinstall to my phone, hence, having a limited information of the phone because of this problem (which is stuck at orange bootstate).
Same Problem
caztricum said:
This did it for me! Many thanks...
Click to expand...
Click to collapse
for now work on not sir
i have same problem stuk n auto restart
if u work can u help me thanks
jtanhw said:
try connecting your phone to your pc with the usb type c cable, and do voldown + power to reboot the phone, and the moment the screen turns black, press volup + voldown. It'll bring you to a different screen where you can press volup to go into download mode for flashing the stock firmware via odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your model number - sm-a505f/sm-a505fn/sm-a505fm, and select the correct region. Also, select the correct modem version (the last 4 letters/number of the item to download). Then, follow the "flashing guide" at the bottom of the samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
thank you very much
thanks for your comment, its help me. my Samsung A50 hanged on boot-loader and loop turn on/off.
Is there a way to install twrp if the problem is like this every time I try to install the twrp it came to this problem. Please help me
jtanhw said:
Try connecting your phone to your PC with the USB Type C cable, and do VolDown + Power to reboot the phone, and the moment the screen turns black, press VolUp + VolDown. It'll bring you to a different screen where you can press VolUp to go into download mode for flashing the stock firmware via Odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
Hi this helped me many thanks <3
jtanhw said:
Try connecting your phone to your PC with the USB Type C cable, and do VolDown + Power to reboot the phone, and the moment the screen turns black, press VolUp + VolDown. It'll bring you to a different screen where you can press VolUp to go into download mode for flashing the stock firmware via Odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
thank you so much you just helped me save my phone
peace keeper said:
thank you so much you just helped me save my phone
Click to expand...
Click to collapse
Have you got the a21s? As can't root it, as every twrp source I use soft bricks the phone, or just bootloops, or goes into error at boot up and stops half way. Was thinking trying other custom recovery. Any tips m8?
jtanhw said:
Try connecting your phone to your PC with the USB Type C cable, and do VolDown + Power to reboot the phone, and the moment the screen turns black, press VolUp + VolDown. It'll bring you to a different screen where you can press VolUp to go into download mode for flashing the stock firmware via Odin. I got my stock firmware from https://samfrew.com/all/page/2/#t (you'll need to search for your Model Number - SM-A505F/SM-A505FN/SM-A505FM, and select the correct Region. Also, select the correct Modem Version (the last 4 letters/number of the item to download). Then, follow the "Flashing Guide" at the bottom of the Samfrew page where you downloaded your firmware.
Click to expand...
Click to collapse
My phone is Realme 6 it doesnt take me anywhere my laptop only does the plugging in and plugging out sound all the time and when I let go of the volume buttons the bootloop happens again
caztricum said:
Hi there. After (an attempt) to unlock the bootloader of my A50 and installing TWRP Recovery (TWRP_A50_Magisk_Prepatched) i find myself in an orange bootstate. I can't get it into recovery, download or fastboot mode. It seems like a full brick. I can't even power off the device. Only Volume up, Volume down and Power button let's the device reboot but then the same boot problems appear. Is there anything i can do to recover my phone?
Text of first screen when booting up:
"The phone's bootloader is unlocked and it's software integrity can't be verified. Andy data on this phone may be vulnerable to attackers. Don't store any important or sensitive information on this phone". Press power key to continue"
Text of second screen when booting up:
"The phone is not running Samsung's official software. You may have problems with features or security and you won't be able to install software updates"
Any ideas!?
Click to expand...
Click to collapse
caztricum said:
Hi there. After (an attempt) to unlock the bootloader of my A50 and installing TWRP Recovery (TWRP_A50_Magisk_Prepatched) i find myself in an orange bootstate. I can't get it into recovery, download or fastboot mode. It seems like a full brick. I can't even power off the device. Only Volume up, Volume down and Power button let's the device reboot but then the same boot problems appear. Is there anything i can do to recover my phone?
Text of first screen when booting up:
"The phone's bootloader is unlocked and it's software integrity can't be verified. Andy data on this phone may be vulnerable to attackers. Don't store any important or sensitive information on this phone". Press power key to continue"
Text of second screen when booting up:
"The phone is not running Samsung's official software. You may have problems with features or security and you won't be able to install software updates"
Any ideas!?
Click to expand...
Click to collapse
I HAD the same issue an I resolved it.
There are 2 methods to overcome this problem.
I even wrote a PDF and attached here in this post.
Below is SOME content from the PDF so it could be easy for users to find it on Google. I still strongly recommend you to refer to the PDF attached as it has pictures as well.
Samsung Galaxy M31 / Samsung M31 Screen is stuck on the following error message / error screen:
‘This phone’s bootloader is unlocked and the software integrity can’t be verified. Any data on this phone may be vulnerable to attackers. Don’t store any important or sensitive information on the phone.’
‘The phone is not running Samsung’s official software. You may have problems with features or security. And you won’t be able to install software updates.’ (error screen looks like below):
I was using correct TWRP and I was on Android 11 One UI 3.1.
Just to experiment, I flashed wrong TWRP version which was meant for Android 10 while being on Android 11. And so this problem started. Stuck on the error screen. Phone will not power off or on. Could not even enter the bootloader screen. Nothing works whatever keys I press. The same screen comes up. When the phone goes off and the phone will not accept charging that mean even you it whole night connected to charger, phone will not be charged- the same error screen.
So, the battery was not charging (my battery was at 24% just before this tragedy happened. It was late night and I thought of waking up tomorrow and plug in charger for an hour thinking if its battery is quite charged then I will follow Fix Method 2).
I woke up next morning and the phone was off (Battery drained fully). To this I was happy thinking that I can now hold Volume + and Power key and connect USB cable to enter Bootloader. When I did that phone would enter bootloader and gets switched off automatically (remember the battery was drained completely, charger too failed to charge battery and phone is not drawing enough power from USB port to stay on bootloader. On bootloader screen the phone’s display is fully on so more power usage).
Now I knew that the USB port is not proving enough power so that the phone could remain On while in bootloader when I hold Volume + and Power key and connect USB cable to enter Bootloader. I know for sure that Fix Method 2 will fix this for sure but it’s quite tiring.
So I referred to my PC manual to figure out which USB port provides maximum power. I found the right port (refer pic below):
So now I figured out 5 Volts port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
If you don’t know which USB Port is 5 Volts then I recommend you to try all the ports and try getting to bootloader screen.
So when the phone was off, I pressed and hold the Volume up and Volume down key and with other hand I connected USB cable and now the phone went in bootloader and then I quickly flashed the right TWRP. Disconnected the USB cable and put the phone to charge and now it was accepting charge. Phone was back into life.
So I resolved it by Fix Method 1 below:
Fix Method 1: On my PC, I located the 5 Volts USB port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
Entered Bootloader screen.
How to enter bootloader screen:
Assuming your phone is unlocked and the developers options are on and you have enabled USB debugging in Developer options and you have little knowledge of flashing firmware or TWRP via Odin.
Press and hold Volume Up and Volume down keys together with one hand and using other hand, connect USB cable to phone and release all the keys. Now phone will show bootloader screen which looks like below pic:
I quickly flashed the correct TWRP via Odin:
Flashing TWRP:
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Press the volume down + volume up button whilst the phone is connected to a pc to boot in download mode;;
· Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
· Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Use Vol up + Power + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, factory reset data and redo from step 5!
TWRP screen was up. I tapped on Reboot and it did not reboot because the battery was not enough charged however I saw that TWRP Menu this means TWRP was working so the phone will boot up once it is charged.
Now I plugged in charger and was happy to see the correct charging screen (refer below pic):
I would turn power switch Off and On it quicky to know the charging percentage.
When it reached 20% I started phone (obviously by long pressing power key and it booted up just fine).
I loved myself
Fix Method 2:
Remove the phone’s back cover.
Be careful while removing the back case as you could screw the finger print sensor.
Disconnect the battery connector from motherboard and reconnect it.
Do not turn on the phone. As turning On will again get you back to the same error screen.
Put the back cover on.
Connect charger. Do not turn phone On yet. Wait for 5 min.
Do not even touch the phone.
Now you need to know the percentage of charge so do not hit the power button yet instead locate the main switch to which your charger is connected. Quickly turn Off and On and look at phone it shows charging percentage.
Once charging percentage reached around 20% you can touch your phone and power it on and it should boot up fine. It should not take more than 5 min to boot up.
Atharkhan101 said:
I HAD the same issue an I resolved it.
There are 2 methods to overcome this problem.
I even wrote a PDF and attached here in this post.
Below is SOME content from the PDF so it could be easy for users to find it on Google. I still strongly recommend you to refer to the PDF attached as it has pictures as well.
Samsung Galaxy M31 / Samsung M31 Screen is stuck on the following error message / error screen:
‘This phone’s bootloader is unlocked and the software integrity can’t be verified. Any data on this phone may be vulnerable to attackers. Don’t store any important or sensitive information on the phone.’
‘The phone is not running Samsung’s official software. You may have problems with features or security. And you won’t be able to install software updates.’ (error screen looks like below):
I was using correct TWRP and I was on Android 11 One UI 3.1.
Just to experiment, I flashed wrong TWRP version which was meant for Android 10 while being on Android 11. And so this problem started. Stuck on the error screen. Phone will not power off or on. Could not even enter the bootloader screen. Nothing works whatever keys I press. The same screen comes up. When the phone goes off and the phone will not accept charging that mean even you it whole night connected to charger, phone will not be charged- the same error screen.
So, the battery was not charging (my battery was at 24% just before this tragedy happened. It was late night and I thought of waking up tomorrow and plug in charger for an hour thinking if its battery is quite charged then I will follow Fix Method 2).
I woke up next morning and the phone was off (Battery drained fully). To this I was happy thinking that I can now hold Volume + and Power key and connect USB cable to enter Bootloader. When I did that phone would enter bootloader and gets switched off automatically (remember the battery was drained completely, charger too failed to charge battery and phone is not drawing enough power from USB port to stay on bootloader. On bootloader screen the phone’s display is fully on so more power usage).
Now I knew that the USB port is not proving enough power so that the phone could remain On while in bootloader when I hold Volume + and Power key and connect USB cable to enter Bootloader. I know for sure that Fix Method 2 will fix this for sure but it’s quite tiring.
So I referred to my PC manual to figure out which USB port provides maximum power. I found the right port (refer pic below):
So now I figured out 5 Volts port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
If you don’t know which USB Port is 5 Volts then I recommend you to try all the ports and try getting to bootloader screen.
So when the phone was off, I pressed and hold the Volume up and Volume down key and with other hand I connected USB cable and now the phone went in bootloader and then I quickly flashed the right TWRP. Disconnected the USB cable and put the phone to charge and now it was accepting charge. Phone was back into life.
So I resolved it by Fix Method 1 below:
Fix Method 1: On my PC, I located the 5 Volts USB port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
Entered Bootloader screen.
How to enter bootloader screen:
Assuming your phone is unlocked and the developers options are on and you have enabled USB debugging in Developer options and you have little knowledge of flashing firmware or TWRP via Odin.
Press and hold Volume Up and Volume down keys together with one hand and using other hand, connect USB cable to phone and release all the keys. Now phone will show bootloader screen which looks like below pic:
I quickly flashed the correct TWRP via Odin:
Flashing TWRP:
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Press the volume down + volume up button whilst the phone is connected to a pc to boot in download mode;;
· Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
· Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Use Vol up + Power + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, factory reset data and redo from step 5!
TWRP screen was up. I tapped on Reboot and it did not reboot because the battery was not enough charged however I saw that TWRP Menu this means TWRP was working so the phone will boot up once it is charged.
Now I plugged in charger and was happy to see the correct charging screen (refer below pic):
I would turn power switch Off and On it quicky to know the charging percentage.
When it reached 20% I started phone (obviously by long pressing power key and it booted up just fine).
I loved myself
Fix Method 2:
Remove the phone’s back cover.
Be careful while removing the back case as you could screw the finger print sensor.
Disconnect the battery connector from motherboard and reconnect it.
Do not turn on the phone. As turning On will again get you back to the same error screen.
Put the back cover on.
Connect charger. Do not turn phone On yet. Wait for 5 min.
Do not even touch the phone.
Now you need to know the percentage of charge so do not hit the power button yet instead locate the main switch to which your charger is connected. Quickly turn Off and On and look at phone it shows charging percentage.
Once charging percentage reached around 20% you can touch your phone and power it on and it should boot up fine. It should not take more than 5 min to boot up.
Click to expand...
Click to collapse
Atharkhan101 said:
I HAD the same issue an I resolved it.
There are 2 methods to overcome this problem.
I even wrote a PDF and attached here in this post.
Below is SOME content from the PDF so it could be easy for users to find it on Google. I still strongly recommend you to refer to the PDF attached as it has pictures as well.
Samsung Galaxy M31 / Samsung M31 Screen is stuck on the following error message / error screen:
‘This phone’s bootloader is unlocked and the software integrity can’t be verified. Any data on this phone may be vulnerable to attackers. Don’t store any important or sensitive information on the phone.’
‘The phone is not running Samsung’s official software. You may have problems with features or security. And you won’t be able to install software updates.’ (error screen looks like below):
I was using correct TWRP and I was on Android 11 One UI 3.1.
Just to experiment, I flashed wrong TWRP version which was meant for Android 10 while being on Android 11. And so this problem started. Stuck on the error screen. Phone will not power off or on. Could not even enter the bootloader screen. Nothing works whatever keys I press. The same screen comes up. When the phone goes off and the phone will not accept charging that mean even you it whole night connected to charger, phone will not be charged- the same error screen.
So, the battery was not charging (my battery was at 24% just before this tragedy happened. It was late night and I thought of waking up tomorrow and plug in charger for an hour thinking if its battery is quite charged then I will follow Fix Method 2).
I woke up next morning and the phone was off (Battery drained fully). To this I was happy thinking that I can now hold Volume + and Power key and connect USB cable to enter Bootloader. When I did that phone would enter bootloader and gets switched off automatically (remember the battery was drained completely, charger too failed to charge battery and phone is not drawing enough power from USB port to stay on bootloader. On bootloader screen the phone’s display is fully on so more power usage).
Now I knew that the USB port is not proving enough power so that the phone could remain On while in bootloader when I hold Volume + and Power key and connect USB cable to enter Bootloader. I know for sure that Fix Method 2 will fix this for sure but it’s quite tiring.
So I referred to my PC manual to figure out which USB port provides maximum power. I found the right port (refer pic below):
So now I figured out 5 Volts port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
If you don’t know which USB Port is 5 Volts then I recommend you to try all the ports and try getting to bootloader screen.
So when the phone was off, I pressed and hold the Volume up and Volume down key and with other hand I connected USB cable and now the phone went in bootloader and then I quickly flashed the right TWRP. Disconnected the USB cable and put the phone to charge and now it was accepting charge. Phone was back into life.
So I resolved it by Fix Method 1 below:
Fix Method 1: On my PC, I located the 5 Volts USB port and plugged the original white Samsung M31 USB cable into one (refer the pic below):
Entered Bootloader screen.
How to enter bootloader screen:
Assuming your phone is unlocked and the developers options are on and you have enabled USB debugging in Developer options and you have little knowledge of flashing firmware or TWRP via Odin.
Press and hold Volume Up and Volume down keys together with one hand and using other hand, connect USB cable to phone and release all the keys. Now phone will show bootloader screen which looks like below pic:
I quickly flashed the correct TWRP via Odin:
Flashing TWRP:
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Press the volume down + volume up button whilst the phone is connected to a pc to boot in download mode;;
· Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
· Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
· Make sure OEM Unlock is ON in developer settings;
· Turn off the phone;
· Use Vol up + Power + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, factory reset data and redo from step 5!
TWRP screen was up. I tapped on Reboot and it did not reboot because the battery was not enough charged however I saw that TWRP Menu this means TWRP was working so the phone will boot up once it is charged.
Now I plugged in charger and was happy to see the correct charging screen (refer below pic):
I would turn power switch Off and On it quicky to know the charging percentage.
When it reached 20% I started phone (obviously by long pressing power key and it booted up just fine).
I loved myself
Fix Method 2:
Remove the phone’s back cover.
Be careful while removing the back case as you could screw the finger print sensor.
Disconnect the battery connector from motherboard and reconnect it.
Do not turn on the phone. As turning On will again get you back to the same error screen.
Put the back cover on.
Connect charger. Do not turn phone On yet. Wait for 5 min.
Do not even touch the phone.
Now you need to know the percentage of charge so do not hit the power button yet instead locate the main switch to which your charger is connected. Quickly turn Off and On and look at phone it shows charging percentage.
Once charging percentage reached around 20% you can touch your phone and power it on and it should boot up fine. It should not take more than 5 min to boot up.
Click to expand...
Click to collapse
Hi, friend. I have the same problem. But I don't even have a bootloader. When I log in, I just get a black screen.