Hello,
I just got an i5 Smartwatch, and while I love it, it won't sync with Zeroner, making it show the wrong time all the time.
It did connect to the app however: (1) bluetooth sign shows on the watch, (2) phone says connected and (3) find phone feature works great. Other than that however, nothing works.
Can anyone help me? I saw some posts about switching firmware and such but I don't know if that would be too extreme for my problem or not.
While I am very tech-savvy, I am very Android-noob as I just made a jump from iOS to Android (I know the basics however), so please, be patient with me.
Related
I find it hard to believe I'm the only one who likes my M360 syncing with my tablet when I'm home, and with my smartphone when I'm out. There is actually no official way to pair the M360 with multiple Android devices at the same time, but I have, however, figured out an alternative. I am going to assume that you already have it paired to one device. If not I believe there are other threads out there to help you with that!
Steps:
In the Android Wear official app, tap the watch icon on the translucent black bar atop the screen to disconnect the M360 first
Check to make sure that underneath the name of your device, the status reads "Not connected"
Go to the watch settings, and reset the device, yes unfortunately there is no way around except factory resetting first
Now go through the original instructions upon boot making sure that this time you pair it with your OTHER Android device
Follow the first two steps again after the device has been paired successfully and booted up
Congratulations! The M360 should now pair with the two devices one at a time after being disconnected from one another!
Hope this helped you guys, as this method definitely works for me with my Nexus 7 (flo) and Galaxy SIII (SGH-I747)!
have you tried Beelink?
https://play.google.com/store/apps/...utm_source=42matters.com&utm_medium=WidgetWeb
nightfishing said:
have you tried Beelink?
https://play.google.com/store/apps/...utm_source=42matters.com&utm_medium=WidgetWeb
Click to expand...
Click to collapse
Old thread, but for the benefit of others who may find this, the dev has unpublished the Beelink app. It appears that the 4.4W.2 Android Wear update broke the app.
It's now 2 years later, has anyone found a way to connect to 2 devices at the same time? I need to get notifications from personal and work phone at the same time on my M360...
I don't think it is possible, but you can sync notification from one phone to other via pushbullet or similar app. This way can get all notifications on the watch as well.
Hi All,
I have receive for Christmas a SW3.
I already have a LG G2 (D802) running Lollipop :
http://forum.xda-developers.com/lg-g2/development/rom-liquidsmooth-v4-0-lg-g2-t2948395
With Render Kernel :
http://forum.xda-developers.com/lg-g2/development/kernel-render-kernel-aosp-lg-roms-t2803929
I have update the SW3 to official 5.0.1 with PC Companion.
Then install Android Wear from the market on the phone :
https://play.google.com/store/apps/details?id=com.google.android.wearable.app&hl=fr
I had "Sleep as Android" app already installed on the phone before get the watch.
I have connect the watch to the phone then I have try to install different apps as :
https://play.google.com/store/apps/details?id=com.npi.wearminilauncher
and
https://play.google.com/store/apps/details?id=com.appfour.wearbrowser
Without problem, the apps appear on the watch., "Sleep as Android" too.
But now, I can't success to install any other apps. I have try :
https://play.google.com/store/apps/details?id=rocketstartups.wearcalculator
Or
https://play.google.com/store/apps/details?id=co.hoomi.athere
But the apps doesn't appear on the watch, I don't understand how to sync the phone and the watch.
I guess I'm too new and there is something that I haven't understand.
Please someone drive me !
Thank you in advance.
Tell me if I'm wrong.
Android Wear is the only "must have" app to manage the watch ?
No need Smart Connect or LiveWear ?...
Open android wear on phone click on the settings gear and click on resync apps
Hello,
Thank you but That doesn't help...
What app do you use to sync the watch?
-JFK- said:
Tell me if I'm wrong.
Android Wear is the only "must have" app to manage the watch ?
No need Smart Connect or LiveWear ?...
Click to expand...
Click to collapse
Android wear is a "must-have" app. And you need also "Google" search app to make sure android wear runs well. (for "ok google" function certainly.)
Did you try to "forget watch device" in android wear and repair it ?
Maybe a factory reset will help, but it is the last option.
Thank you for your reply.
I have disable the location to save battery and the sync have work...
I don't understand!
But now, all work as it should.
Hi,
I'm an expert on SmartWatch 3 and have met with a programmer from the Google team. You require 2 things to fully install apps on your watch, which take max 60 minutes to sync to your watch 100%
1. The first requirement to make sure apps install 100% is a WiFi router network which your phone is connected to, and your SmartWatch 3 is within range of the
area of the router.
2. Your Smartwatch 3 and your Android phone on charge during about 1 hour. The apps sync fast while the battery is being charged, and sync slower if not plugged in.
Do these two things, and the apps will install over WiFi directly from your phone to the watch through WiFi settings of the router.
I just lived in Philippines for 1 month, bought a new Sony phone there and tried installing my Smartwatch 3 over mobil data connection to the phone without a router and not a single app synced. 1 week later ONE app synced. I came home to my country of Sweden with my router and did the same thing with a reset of the watch, and all apps synced in about 45 minutes.
So I just pickup a Moto 360 2nd Gen smartwatch 2 days ago. I am currently using an Iphone 5. I was able to get the watch and phone connected through bluetooth perfectly fine as Motorola promise it does work with Apple Phones. However I spent the next day or so trying to look for wifi connectivity on the watch as well as the phone. it is no where to be found. The wifi setting on the Moto 360 is just not there. I try searching online for answers and all comes back to say the watch have a wifi feature which can be set at the setting area within the Moto 360. But regardless of what I did. turning off and on the watch number of times. Factory reset the watch number of times. updated to the latest Android wear OS 5.1.1. it still does not show up. I called Motorola tech support. the rep had a watch on his hand and said there should be a wifi setting in the Moto 360. However I'm certain he is not pair to an iphone. so he ask me to go and return the phone and said there could be a software issue with the watch I have.
I realize with Android wear connecting to an iphone, I will never get the full functionality as connecting to an Android phone. And I'm sure the wifi is one of the feature that will not work, simply because within Android wear app itself, in order for the wifi feature to work with the phone, inside Android wear, you have to turn on CLOUD sync. and Android ware for Iphone does not have the CLOUD sync feature in it. so I figure even if the wifi feature on the Moto 360 2nd gen is there, it won't do any good because of lack of CLOUD sync.
Just to answer some of you ask why I would buy a Android Wear watch instead of an Apple watch since I'm using a Iphone. well, the iphone is just my temporary phone. I have a Sony Xperia Z3 Compact, it was sent in for repair. until it come back. i'm using an old Iphone for my Spare.
Hope this help some people when they run into this issue. If you found something I don't know. please let me know. I like to know. thanks
WiFi and Bluetooth settings are disabled/hidden on all Android Wear devices when they connect to and iOS device.
Hello everyone. I'm new here. I don't know if there is a topic similar with my issue but my smartwatch sony 3 can't connect with the internet and with the android wear app. Yesterday it was working well with my android tablet, but then I pair with another android smartphone and I can't connect it again with my tablet. It says on the smartwatch that is connected but then it shows "Just a minute..." and on the android tablet "checking for updates... this may take a few minutes". After a few minutes it shows on the smartwatch "can't connect to the android wear app on your phone. Swipe for some tips."
I have done the downgrade of the smartwatch to LWX48P version because I want to update to LCA43 to use NFC with freestyle libre because I am diabetic. Please help me, and thank you so much for your patience.
Best regards from Portugal,
Catarina
Greetings. Perhaps the problem you are having is the switch. Your watch can only be connected to one host device (phone/tablet) at a time. In order to switch you need to disconnect it from the device and set it up as a new device on the new one. This will trigger a wipe (at least of /data). There may be an app to make the switch easier, but I am not sure.
Good luck.
~Leko
Sent from my SM-T810 using Tapatalk
Catarina Pina said:
Hello everyone. I'm new here. I don't know if there is a topic similar with my issue but my smartwatch sony 3 can't connect with the internet and with the android wear app. Yesterday it was working well with my android tablet, but then I pair with another android smartphone and I can't connect it again with my tablet. It says on the smartwatch that is connected but then it shows "Just a minute..." and on the android tablet "checking for updates... this may take a few minutes". After a few minutes it shows on the smartwatch "can't connect to the android wear app on your phone. Swipe for some tips."
I have done the downgrade of the smartwatch to LWX48P version because I want to update to LCA43 to use NFC with freestyle libre because I am diabetic. Please help me, and thank you so much for your patience.
Best regards from Portugal,
Catarina
Click to expand...
Click to collapse
Just a hunch, but you probably need to disconnect it from Android Wear on both devices, then remove Bluetooth pair from both devices in Bluetooth settings, then reset the watch to factory settings, then start with a clean slate.
But previous poster is correct, you cannot pair it with 2 devices, which is really annoying, so pick one device only, and you can't switch from one to the other, and then back again.
admisi said:
Just a hunch, but you probably need to disconnect it from Android Wear on both devices, then remove Bluetooth pair from both devices in Bluetooth settings, then reset the watch to factory settings, then start with a clean slate.
But previous poster is correct, you cannot pair it with 2 devices, which is really annoying, so pick one device only, and you can't switch from one to the other, and then back again.
Click to expand...
Click to collapse
Thank you so much for your reply! It works if the smartwatch has the latest version ! But the main question is that with the LWX48P version I can't connect with my tablet. But I need to update to LCA43, and without internet I can't do it. I searched for a OTA version of LWX48P to LWX49K to LDZ22D and finally to LCA43 to make the upgrade manually but I can't find it. Can you help me please? Thank you!
Catarina
O.K,
I am trying to switch from a windows car pc to an android version.
To be honest, car pc's are a real dinosaur, so I was hoping for a lot more innovation in the android field.
So '........... I am trying several android car launchers to try to get a feel for things.
I have an allergy ( ) to Google services, so do not want any google voice search, or android auto.
Happy with offline maps as well.
I am now finding a problem with what I think should be one of the most basic things - that is , making and receiving calls.
First off, I have a 10 inch android tablet on which I am trialling these apps.
I am connecting my nokia smartphone ( android 11 ) to the tablet via bluetooth.
NOW....... I foolishly thought that android could take care of the rest without much tweaking.
By that i mean, if my phone is connected and sharing contacts, why can't I click on the ''phone ' icons on the apps, and get either 1) a dialler, or 2) a list of contacts??
Am I wrong? - is that not one of the most basic things - to connect your phone to a tablet and use the tablet app to make calls using your connected phone?
I have had no luck doing this , and have found little info on the web.
I am sure I am going mad, but could anyone give me an idiots guide to how to achieve this?
Many Thanks
pootler