Develop Bugs

Problems With My M8

Hello Friends:
I've a big problem on my M8: It doesn't load S.O and remains only in fastboot mode. Yesterday, when I arrived to my home, suddenly reboots and stayed in fastboot mode. I share with you screen captures of my M8 ASAP. I tried to install in fastboot mode a stock RUU but it gives me error code in the bootloader process.
Please, i need your help or any advice to know how to fix it.:crying:
Many thanks and salutes from Chile.

I can't load SC yet...the forum won't let me do it. :crying:

What CID, hboot, radio, number, OS number (in bootloader)?
What is the filename for the RUU you tried?
What is the specific error message when running the RUU? Try running it a 2nd time (not unusual for it to fail the first time).

redpoint73 said:
What CID, hboot, radio, number, OS number (in bootloader)?
What is the filename for the RUU you tried?
What is the specific error message when running the RUU? Try running it a 2nd time (not unusual for it to fail the first time).
Click to expand...
Click to collapse
Hello, this is the info:
I install the ViperOne 4.51
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.531.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 06f11f5b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s

You didn't answer half the questions I asked you.
Hard to help, if you don't provide all the info requested.

This is the error code:
fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [SD_ERR] sd_read_sector: read sector failed (786432 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 0
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
(bootloader) [SD_ERR] sd_write_sector: write sector failed (786432 256)
OKAY [ 10.297s]
finished. total time: 10.297s

redpoint73 said:
You didn't answer half the questions I asked you.
Hard to help, if you don't provide all the info requested.
Click to expand...
Click to collapse
Sorry man, but after 4 minutes i can answer in the forum... i'm doing my best.
I guess this is all the information... or did i miss something?

I tried to install the RUU for T-Mobile:
Device Name Latest ROM #
HTC One (M8) 4.20.531.4

XBEOP said:
I tried to install the RUU for T-Mobile:
Click to expand...
Click to collapse
I asked for the filename, that isn't a filename. I asked for a reason, since folks often think they have the right RUU, when in fact is completely the wrong one.
But probably irrelevant anyway. Based on the error message, you may have a fried emmc.

redpoint73 said:
I asked for the filename, that isn't a filename. I asked for a reason, since folks often think they have the right RUU, when in fact is completely the wrong one.
But probably irrelevant anyway. Based on the error message, you may have a fried emmc.
Click to expand...
Click to collapse
Oh! So my M8 is dead or not??
Please, let me know if there is a solution...
Thanks!

XBEOP said:
Oh! So my M8 is dead or not??
Click to expand...
Click to collapse
I'm not sure, but I'm thinking its dead.
I haven't seen those error messages before, so maybe somebody here with more knowledge can chime in.

error in converting opja110 to developer edition

i am trying to convert my opja110 to developer edition. and facing modelid problem.
my details are (after changing the cid and mid)
boot-mode: RUU
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: BS_US001
and am getting error
HOSD CL#671758
(bootloader) ERR Model ID not matched
(bootloader) ERR [SD_UPDATE_ERR] MODEL ID NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 10
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 10
(bootloader) [email protected]
FAILED (remote: 10 RU_MODELID_FAIL modelid in android-info mismatched )
finished. total time: 8.588s
htc_fastboot finished. total time: 12.936s
i do appreciate a lot if someone solve my problem please

The answer is in the error message: your model ID (0PJA10000 - that's the international M9 MID) isn't valid for the developer RUU even though your CID (BS_US001) is correct.
Either switch your MID to match your developer CID and use the developer RUU or switch your CID to match your MID and use the international RUU. Both will give you an upgrade path to Nougat (presumably your goal). The readme thread - particularly the 3rd post - will guide you through this neatly.

How to update HTC10 with software version 2.42.651.66 to Oreo 8.0?

Hi there people!
I have got my HTC10 running on software version 2.42.651.66 (which seems to be Sprint US edition). However I am running this device in UAE without any network issues.
Is there any way to update to Anroid 8.0 Oreo?
Would appreciate some help.

hi!
did you actually get the update?
i'm in the same scenario

cigarpill said:
hi!
did you actually get the update?
i'm in the same scenario
Click to expand...
Click to collapse
no idea how you guys use google but i just typed in "2.42.651 HTC10 RUU" and all of a sudden out of the blue i see download links
https://androidfilehost.com/?fid=457095661767153377
First link i got was this one....all sorts of ruu files
https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
Now that's weird right !

Mr Hofs said:
no idea how you guys use google but i just typed in "2.42.651 HTC10 RUU" and all of a sudden out of the blue i see download links
https://androidfilehost.com/?fid=457095661767153377
First link i got was this one....all sorts of ruu files
https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
Now that's weird right !
Click to expand...
Click to collapse
haha
i've seen that page, but i don't get that RUU to work
i downloaded it and it's a zip... isn't a RUU an exe?
even if i flash it like a zip throught fastboot i can't find any stock RUU for my actual firmware, in case of any error
i'm s-off but my bootloader is locked (wtf did the last user did?!), and i can't relock it...
so, i'm really lost... would you help me?

cigarpill said:
haha
i've seen that page, but i don't get that RUU to work
i downloaded it and it's a zip... isn't a RUU an exe?
even if i flash it like a zip throught fastboot i can't find any stock RUU for my actual firmware, in case of any error
i'm s-off but my bootloader is locked (wtf did the last user did?!), and i can't relock it...
so, i'm really lost... would you help me?
Click to expand...
Click to collapse
A ruu.zip is easiest flashed through download mode. Rename the ruu.zip to 2PS6IMG.zip and copy it to the SDCARD then enter download mode, the file will be automatically detected and you will be asked to flash it.
If the 2.42 ruu doesn't work pick the 2.5x ruu and do the above again.
"wtf did the user do" the user did nothing, he used sunshine and they offer the option to s-off the device and keep the status of the bootloader locked.
What is locked can't be relocked obviously, if you want unlocked status just rerun the sunshine app and change your values.
Edit : it even says there EXACTLY what to do with the ruu.zip, please pay some attention and read a bit more carefully.
Keep me posted. Cheers

This is literally written in that thread

Mr Hofs said:
A ruu.zip is easiest flashed through download mode. Rename the ruu.zip to 2PS6IMG.zip and copy it to the SDCARD then enter download mode, the file will be automatically detected and you will be asked to flash it.
If the 2.42 ruu doesn't work pick the 2.5x ruu and do the above again.
"wtf did the user do" the user did nothing, he used sunshine and they offer the option to s-off the device and keep the status of the bootloader locked.
What is locked can't be relocked obviously, if you want unlocked status just rerun the sunshine app and change your values.
Edit : it even says there EXACTLY what to do with the ruu.zip, please pay some attention and read a bit more carefully.
Keep me posted. Cheers
Click to expand...
Click to collapse
you are amazing!
look, i just have a 2gb sd card, so i just will stick to the fastboot process
right now check this:
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: :silly:
(bootloader) version-main: 2.42.651.6
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: 11111111
all:
finished. total time: 0.007s
my main goal is to have OREO on this beautiful cdma gsm htc 10 Sprint variant, let me tell you what i have done until now.
1. i went to this post and checked all my options: https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
2. i downloaded the very first exe showed there, which is Sprint_HTC10_3.18.651.3_RUU. i executed it but failed with an infamous 132 signature error. i read about but didn't find a solution.
3. i decided to leave any exe for the noobs, so i downloaded my exact ruu.zip, which is 2PS6IMG_2.42.651.6_RUU.zip. actually my firmware is 2.42.651.66, with and extra 6; anyway, it failed too but this time with this message on PowerShell:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
4. i moved on and downloaded this 105.1mb firmware: 2PS6IMG_Sprint_2.42.651.6_signed_firmware.zp. i flashed it twice:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 5.777s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) Perform pre-update
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 8.070s
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 6.082s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) [email protected]
OKAY [ 8.712s]
finished. total time: 14.794s
5. i was happy, now something flashed correctly so i flashed the 2PS6IMG_2.42.651.6_RUU.zip ruu again and guess what...
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip ruu.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
6. i didn't give up, so i downloaded the 100mb firmware 2PS6IMG_Sprint_3.18.651.3_signed_firmware.zip for oreo and did all the same with the ruu for oreo, same result....
7. i noticed this https://forum.xda-developers.com/showpost.php?p=67056758&postcount=4, so i proved Sneaky's fastboot. this time the previous steps became into this
C:\Android>fastboot flash zip 2PS6IMG.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (8492 KB)...
OKAY [ 1.416s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_O
(bootloader) V1mhK
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 3.505s
SOOOOOO, now i'm stuck on this puzzle
i'm certainly wrong at something, and my phone isn't turning on, it's bootlooping.
what would be my next step... help me :crying:

cigarpill said:
you are amazing!
look, i just have a 2gb sd card, so i just will stick to the fastboot process
right now check this:
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: :silly:
(bootloader) version-main: 2.42.651.6
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: 11111111
all:
finished. total time: 0.007s
my main goal is to have OREO on this beautiful cdma gsm htc 10 Sprint variant, let me tell you what i have done until now.
1. i went to this post and checked all my options: https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
2. i downloaded the very first exe showed there, which is Sprint_HTC10_3.18.651.3_RUU. i executed it but failed with an infamous 132 signature error. i read about but didn't find a solution.
3. i decided to leave any exe for the noobs, so i downloaded my exact ruu.zip, which is 2PS6IMG_2.42.651.6_RUU.zip. actually my firmware is 2.42.651.66, with and extra 6; anyway, it failed too but this time with this message on PowerShell:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
4. i moved on and downloaded this 105.1mb firmware: 2PS6IMG_Sprint_2.42.651.6_signed_firmware.zp. i flashed it twice:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 5.777s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) Perform pre-update
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 8.070s
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 6.082s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) [email protected]
OKAY [ 8.712s]
finished. total time: 14.794s
5. i was happy, now something flashed correctly so i flashed the 2PS6IMG_2.42.651.6_RUU.zip ruu again and guess what...
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip ruu.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
6. i didn't give up, so i downloaded the 100mb firmware 2PS6IMG_Sprint_3.18.651.3_signed_firmware.zip for oreo and did all the same with the ruu for oreo, same result....
7. i noticed this https://forum.xda-developers.com/showpost.php?p=67056758&postcount=4, so i proved Sneaky's fastboot. this time the previous steps became into this
C:\Android>fastboot flash zip 2PS6IMG.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (8492 KB)...
OKAY [ 1.416s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_O
(bootloader) V1mhK
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 3.505s
SOOOOOO, now i'm stuck on this puzzle
i'm certainly wrong at something, and my phone isn't turning on, it's bootlooping.
what would be my next step... help me :crying:
Click to expand...
Click to collapse
Stubborn to stay with fastboot commands......well done
But what next......
First it's needed to get into the bootloader or download mode. If you are still on the 2.42 firmware than also use that ruu (that your OS is .66 and the ruu .6 is not relevant, that's just software related and not firmware and it won't interfere the flash). Read up in one of the guides about the the topic "RUU mode" it's done via a command "fastboot oem rebootRUU" but i am not 100% sure at this time if you enter this menu via the bootloader or download menu, check that out please. At the moment i don't have the time to do searches.
If you can't get that to work i can suggest to enter download mode, flash TWRP, flash a stock based nougat rom, rerun sunshine and set all flags to s-off and unlocked bootloader instead of a locked one. In the very beginning that flag caused issues flashing kernels which they addressed later on with further development, maybe your device is has a hiccup at that level somehow.
Cheers

Mr Hofs said:
Stubborn to stay with fastboot commands......well done
But what next......
First it's needed to get into the bootloader or download mode. If you are still on the 2.42 firmware than also use that ruu (that your OS is .66 and the ruu .6 is not relevant, that's just software related and not firmware and it won't interfere the flash). Read up in one of the guides about the the topic "RUU mode" it's done via a command "fastboot oem rebootRUU" but i am not 100% sure at this time if you enter this menu via the bootloader or download menu, check that out please. At the moment i don't have the time to do searches.
If you can't get that to work i can suggest to enter download mode, flash TWRP, flash a stock based nougat rom, rerun sunshine and set all flags to s-off and unlocked bootloader instead of a locked one. In the very beginning that flag caused issues flashing kernels which they addressed later on with further development, maybe your device is has a hiccup at that level somehow.
Cheers
Click to expand...
Click to collapse
guess what????
i did it!
i flashed the 100mb oreo FIRMWARE listed on that page... then i RUUed with the first exe
i have SPRINT oreo.... but
i hate the bloatware and that hands free activation... stuff i cant use in my country even if i want
wonder, is there a way to flash the developer ruu without damaging the CDMA options? i mean, i recently found out there are 2 variants... gsm and CDMA... didnt know CDMA existed because i live in LatinAmerica. im afraid to flash another zip and lost my signal or something
thank you for your help-1
PD... i m still wondering how to unlock my bootloader, i installed sunshine apk but theres only option to reboot.
the reason why i want to unlock my bl its because in developer options i cant UNLOCK OEM as the option isnt selectable... why?

cigarpill said:
guess what????
i did it!
i flashed the 100mb oreo FIRMWARE listed on that page... then i RUUed with the first exe
i have SPRINT oreo.... but
i hate the bloatware and that hands free activation... stuff i cant use in my country even if i want
wonder, is there a way to flash the developer ruu without damaging the CDMA options? i mean, i recently found out there are 2 variants... gsm and CDMA... didnt know CDMA existed because i live in LatinAmerica. im afraid to flash another zip and lost my signal or something
thank you for your help-1
PD... i m still wondering how to unlock my bootloader, i installed sunshine apk but theres only option to reboot.
the reason why i want to unlock my bl its because in developer options i cant UNLOCK OEM as the option isnt selectable... why?
Click to expand...
Click to collapse
Sprint / GSM / CDMA conversion, don't know anything about that and i really can't help with that.
Bloatware, root the OS and delete the bloatware manually
Why do you want to change the unlock oem status in settings ?

Mr Hofs said:
Sprint / GSM / CDMA conversion, don't know anything about that and i really can't help with that.
Bloatware, root the OS and delete the bloatware manually
Why do you want to change the unlock oem status in settings ?
Click to expand...
Click to collapse
as far as i can understand
to change mid cid and flash other ruus

cigarpill said:
as far as i can understand
to change mid cid and flash other ruus
Click to expand...
Click to collapse
Nope. Oem unlock allows you to unlock the bootloader which is needed to flash TWRP and with that custom roms.
To get s-off you need to run sunshine and that requires root so the first time the device needs oem unlock enabled, unlock the bootloader, root the OS and perform sunshine to acquire s-off.
To change cid and mid you need s-off which you already have. So in a way you do not need that option enabled.
Why don't you start with the basics and read more in the sprint section to gain more knowledge and learn if sprint can even be converted in a safe way ?

Problems installing stock rom - RUU.zip

Hi.
I'm having difficulties installing ruu.zip and I've tried many different guides.
My phone is now in a bootloop and I can't do much with it.
Tried the following now (from CMD)
C:\Users\aaale\Downloads\adb_and_fastboot_files>htc_fastboot oem rebootRUU
... OKAY
Execution time is 1(s)
C:\Users\aaale\Downloads\adb_and_fastboot_files>htc_fastboot flash zip rom.zip
sending 'zip'... (1809581 KB) OKAY
sending time = 69.789 secs
writing 'zip'... (bootloader) HOSD CL#857212
(bootloader) ERR [SD_UPDATE_ERR] Main version NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 19
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR CODE, 19
(bootloader) [email protected]
FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing or i
FAILED (remote: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i)
Execution time is 73(s)
C:\Users\aaale\Downloads\adb_and_fastboot_files>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno: FA68ZBN00235
(bootloader) current-slot:
(bootloader) imei: 354261074371675
(bootloader) version-main: 2.41.401.4
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
all:
finished. total time: 0.005s
I'm using the correct .zip from XDA for CID: HTC__034 but still get error messages, any hints on how to fix this? (I'm not an expert on this)

Problem solved!
After searching forever in google i FINALLY found the RUU.EXE for HTC 10 europe CID_0034
androidfilehost.com/?fid=961840155545574383
Now I successfully installed stock rom again

RUU.zip should be installed by renaming it and placing it on the sdcard, then boot to download mode and the zip will be recognized to flash it.

RUU Model ID mismatch error

UPDATE: I was able to run 3.16.617.2 RUU.exe while phone was in RUU mode. The program successfully detected the phone and restored it back to stock.
Hi,
I was trying to roll back from LOS (Android 9) to stock 8.0 Oreo.
I downloaded the RUU zip, renamed it to 2PS6IMG.zip, and flashed it but got a model ID mismatch error, and flash failed. Tried fastboot getvar all and got the following:
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) boot-mode:FASTBOOT
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61b000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:<Removed on purpose>
version-baseband and version-bootloader are returned blank by this command.
i tried to fastboot flash the ruu zip and got the following error:
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
Sending sparse 'zip' 1/2 (1048572 KB) error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
OKAY [ 37.228s]
Writing sparse 'zip' 1/2 (bootloader) HOSD CL#1012001
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_c
(bootloader) FoslP
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: '22 RU_HEADER_ERROR ')
Finished. Total time: 58.930s
Any suggestions?

Yeah you flashed "a" ruu, which one exactly ? Second the fastboot getvar all command should be done with the phone in download mode. Not bootloader.
Try again and give the proper info.
Cheers

Mr Hofs said:
Yeah you flashed "a" ruu, which one exactly ? Second the fastboot getvar all command should be done with the phone in download mode. Not bootloader.
Try again and give the proper info.
Cheers
Click to expand...
Click to collapse
Oh sorry, my bad. The fastboot getvar all from download mode gives:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmewl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: HT6ARBN00041
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: <Removed>
(bootloader) version-main: 3.16.401.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS650000
(bootloader) cid: BS_US001
I have tried the 3.16.401.2 RUU zip, but it failed. I then realized that the correct zip for BS_US001 would be 3.16.617.2. So i flashed that, but same result.
Currently I am:
S-on
relocked
stuck in download mode
If i try to flash RUU zip from sd card, i get "12 RU zip error", and if i try flashing via fastboot, i get
Code:
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 933555519 is not a multiple of the block size 4096
Sending sparse 'zip' 1/2 (1048572 KB) error: write_sparse_skip_chunk: don't care size 933555519 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 933555519 is not a multiple of the block size 4096
OKAY [ 50.183s]
Writing sparse 'zip' 1/2 (bootloader) HOSD CL#1012001
FAILED (remote: '9 RU_SECURITY_FAIL zip from usb command in download mode')
Finished. Total time: 56.306s

Tip 1 : keep your issue in 1 thread ONLY ! it's confusing
Now, your CID is actually from another model and your OS version is wwe Europe.....that can't be done with s-on.
Q1: are you sure your device isn't s-off but with s-on status ? This can be possible because sunshine provides that option.
Try the sunshine app to see if your device has been registered there, if so it will make things easier.
Please confirm the questions i have for you.

Mr Hofs said:
Tip 1 : keep your issue in 1 thread ONLY ! it's confusing
Now, your CID is actually from another model and your OS version is wwe Europe.....that can't be done with s-on.
Q1: are you sure your device isn't s-off but with s-on status ? This can be possible because sunshine provides that option.
Try the sunshine app to see if your device has been registered there, if so it will make things easier.
Please confirm the questions i have for you.
Click to expand...
Click to collapse
I am not S-OFF, my download mode says S-ON. I have never tried setting it to s-off
fastboot getvar all in download mode shows: (bootloader) version-main: 3.16.401.2
while on the phone screen it says OS-3.16.617.2
cid: BS_US001
mid: 2PS650000
can not use the sunshine app since i can only boot into download and bootloader mode.
Also apologies about the multiple thread confusion, will only post in this one now.

Khizar Amin said:
Hi,
I was trying to roll back from LOS (Android 9) to stock 8.0 Oreo.
I downloaded the RUU zip, renamed it to 2PS6IMG.zip, and flashed it but got a model ID mismatch error, and flash failed. Tried fastboot getvar all and got the following:
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) boot-mode:FASTBOOT
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61b000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:<Removed on purpose>
version-baseband and version-bootloader are returned blank by this command.
i tried to fastboot flash the ruu zip and got the following error:
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
Sending sparse 'zip' 1/2 (1048572 KB) error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 960139745 is not a multiple of the block size 4096
OKAY [ 37.228s]
Writing sparse 'zip' 1/2 (bootloader) HOSD CL#1012001
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_c
(bootloader) FoslP
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: '22 RU_HEADER_ERROR ')
Finished. Total time: 58.930s
Any suggestions?
Click to expand...
Click to collapse
Was able to get an RUU exe to work with phone in RUU mode
Thanks a bunch though @Mr Hofs

Khizar Amin said:
Was able to get an RUU exe to work with phone in RUU mode
Thanks a bunch though @Mr Hofs
Click to expand...
Click to collapse
Would you mind explaining how you did it exactly with what ruu. Because still your OS did not match your CID.
Thanks in advance
Edit :
You didn't read well. When your download mode says 3.16.401 and your CID BS 001 it's been modded because they mismatch.
So either your device has been set to s-off but with the s-on flag by sunshine.
So again : try this
Download the sunshine app (has nothing to do with your bootloader) and run it. When the application continues all the way without payment and you can reset your options it's been registered and thus modded.
Please read carefully what i write......

Mr Hofs said:
Would you mind explaining how you did it exactly with what ruu. Because still your OS did not match your CID.
Thanks in advance
Edit :
You didn't read well. When your download mode says 3.16.401 and your CID BS 001 it's been modded because they mismatch.
So either your device has been set to s-off but with the s-on flag by sunshine.
So again : try this
Download the sunshine app (has nothing to do with your bootloader) and run it. When the application continues all the way without payment and you can reset your options it's been registered and thus modded.
Please read carefully what i write......
Click to expand...
Click to collapse
When i was trying to fix the phone, i first tried with the .401 zip several times, but it would always fail during the process. Then, while searching on xda, i realized that i was using the wrong RUU, so i downloaded the .617 ruu exe to match my CID
I booted the phone to RUU mode, since it was only booting to bootloader, RUU or download modes, and ran the ruu exe. RUU detected my phone and i started the flash, and to my surprise, it actually worked without error. This was surprising because RUU.zip failed to flash, but somehow, exe did not. After the phone booted up, i was able to unlock bootloader again.
I have tried the sunshine thing, but the phone currently isnt rooted. I`ll root phone and get back in a bit.
Edit:
This is the current fastboot getvar all result
(bootloader) kernel: lk
(bootloader) product: htc_pmewl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno:
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 3.16.617.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS650000
(bootloader) cid: BS_US001

Mr Hofs said:
Would you mind explaining how you did it exactly with what ruu. Because still your OS did not match your CID.
Thanks in advance
Edit :
You didn't read well. When your download mode says 3.16.401 and your CID BS 001 it's been modded because they mismatch.
So either your device has been set to s-off but with the s-on flag by sunshine.
So again : try this
Download the sunshine app (has nothing to do with your bootloader) and run it. When the application continues all the way without payment and you can reset your options it's been registered and thus modded.
Please read carefully what i write......
Click to expand...
Click to collapse
Rooted, checked sunshine. It takes me to payment. Sunshine has not been purchased for this device.

Khizar Amin said:
Rooted, checked sunshine. It takes me to payment. Sunshine has not been purchased for this device.
Click to expand...
Click to collapse
Then i have no idea what happened to your device but a IS unlocked CID and European firmware isn't really possible. At least your issue is fixed but it still baffles me.
Cheers