Problems With My M8 - One (M8) Q&A, Help & Troubleshooting

Hello Friends:
I've a big problem on my M8: It doesn't load S.O and remains only in fastboot mode. Yesterday, when I arrived to my home, suddenly reboots and stayed in fastboot mode. I share with you screen captures of my M8 ASAP. I tried to install in fastboot mode a stock RUU but it gives me error code in the bootloader process.
Please, i need your help or any advice to know how to fix it.:crying:
Many thanks and salutes from Chile.

I can't load SC yet...the forum won't let me do it. :crying:

What CID, hboot, radio, number, OS number (in bootloader)?
What is the filename for the RUU you tried?
What is the specific error message when running the RUU? Try running it a 2nd time (not unusual for it to fail the first time).

redpoint73 said:
What CID, hboot, radio, number, OS number (in bootloader)?
What is the filename for the RUU you tried?
What is the specific error message when running the RUU? Try running it a 2nd time (not unusual for it to fail the first time).
Click to expand...
Click to collapse
Hello, this is the info:
I install the ViperOne 4.51
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.531.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 06f11f5b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s

You didn't answer half the questions I asked you.
Hard to help, if you don't provide all the info requested.

This is the error code:
fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [SD_ERR] sd_read_sector: read sector failed (786432 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 0
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
(bootloader) [SD_ERR] sd_write_sector: write sector failed (786432 256)
OKAY [ 10.297s]
finished. total time: 10.297s

redpoint73 said:
You didn't answer half the questions I asked you.
Hard to help, if you don't provide all the info requested.
Click to expand...
Click to collapse
Sorry man, but after 4 minutes i can answer in the forum... i'm doing my best.
I guess this is all the information... or did i miss something?

I tried to install the RUU for T-Mobile:
Device Name Latest ROM #
HTC One (M8) 4.20.531.4

XBEOP said:
I tried to install the RUU for T-Mobile:
Click to expand...
Click to collapse
I asked for the filename, that isn't a filename. I asked for a reason, since folks often think they have the right RUU, when in fact is completely the wrong one.
But probably irrelevant anyway. Based on the error message, you may have a fried emmc.

redpoint73 said:
I asked for the filename, that isn't a filename. I asked for a reason, since folks often think they have the right RUU, when in fact is completely the wrong one.
But probably irrelevant anyway. Based on the error message, you may have a fried emmc.
Click to expand...
Click to collapse
Oh! So my M8 is dead or not??
Please, let me know if there is a solution...
Thanks!

XBEOP said:
Oh! So my M8 is dead or not??
Click to expand...
Click to collapse
I'm not sure, but I'm thinking its dead.
I haven't seen those error messages before, so maybe somebody here with more knowledge can chime in.

Related

[Q] i broke my m8 stuck i logo and 4 triangle any advice ?! help

i try ro flash gpe ruu and it dos not run it is broke my mobile
i change cid to 1111111 not work
is any one can advise
C:\Users\m.banamah\Desktop\New folder\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.36.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT529WM00523
(bootloader) imei: 358705060044932
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 56f9ae32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s​
iioodii said:
i try ro flash gpe ruu and it dos not run it is broke my mobile
i change cid to 1111111 not work
is any one can advise
C:\Users\m.banamah\Desktop\New folder\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.36.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT529WM00523
(bootloader) imei: 358705060044932
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 56f9ae32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s​
Click to expand...
Click to collapse
fastboot oem rebootRUU
then you need to run the command twice fastboot flash zip RUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip
my bad and u need to change your mid inbox me
not working
C:\Users\m.banamah\Desktop\New folder\adb> fastboot flash zip RUU-HTC_One_M8_GPE
_5.1-4.04.1700.4.zip
target reported max download size of 1826418688 bytes
sending 'zip' (655035 KB)...
OKAY [ 29.719s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 30.298s
iioodii said:
not working
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
Click to expand...
Click to collapse
There's your answer right there. You need to change MID to one that is supported by the GPE RUU. Looks like you've already changed your CID to one that works with the GPE RUU. But you need to change CID and MID.
OK I will try
iioodii said:
OK I will try
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2708581
thats how to change your mid since you have no rom i guess, you can flash the latest version of twrp and boot into it and once in it you can put the commands in
i try to change it from this http://forum.xda-developers.com/showthread.php?t =2733850
but my mainver: 2.04.605.2 not listed
also adb commands not working . only fastboot command working .
and i try to flash custom recovery it's flashed but i can not inter it
any suggesting gays
toysoldierq said:
http://forum.xda-developers.com/showthread.php?t=2708581
thats how to change your mid since you have no rom i guess, you can flash the latest version of twrp and boot into it and once in it you can put the commands in
Click to expand...
Click to collapse
Adb command not work
iioodii said:
Adb command not work
Click to expand...
Click to collapse
adb commands dont work in fastboot mode, you need to flash the latest version of twrp boot into it and then use the adb commands if your unsure of what to do and dont want to furher damage your phone i can help you over teamviewer, changing your mid is risky if your not sure and can damage your device badly any wrong mistake and its game over.
iioodii said:
i try to change it from this http://forum.xda-developers.com/showthread.php?t =2733850
but my mainver: 2.04.605.2 not listed
Click to expand...
Click to collapse
The link is for flashing a new splash screen. Don't know why you are linking or trying to follow this.
iioodii said:
and i try to flash custom recovery it's flashed but i can not inter it
Click to expand...
Click to collapse
adb commands will only work while booted in OS or custom recovery. That is what the previous post (Post #6 above) was talking about.
iioodii said:
and i try to flash custom recovery it's flashed but i can not inter it
Click to expand...
Click to collapse
The photo in your first post indicates your bootloader is relocked. Did you unlock it again?
If its still relocked, custom recovery will never flash properly.
redpoint73 said:
The link is for flashing a new splash screen. Don't know why you are linking or trying to follow this.
adb commands will only work while booted in OS or custom recovery. That is what the previous post (Post #6 above) was talking about.
The photo in your first post indicates your bootloader is relocked. Did you unlock it again?
If its still relocked, custom recovery will never flash properly.
Click to expand...
Click to collapse
i fix the problem over teamviewer red point, what i did was edit the model id in the zip from the google play stock rooted rom to match his and flash it, then unlock his bootloader with adb and change both mid and cid to google play, his phone was stuck at the htc logo black screen that fix it.

M8whl radio; open dsp invalid version info

Hey Errybody;
thanks for all you getting with...
i have an htc m8whl, that only boots to H-boot and has such errors as invalid radio and open dsp.
I have attempted a (fastboot getvar all) and this is what i get.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.651.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT45YWM03121
(bootloader) imei: (i deleted this)
(bootloader) imei2: Not Support
(bootloader) meid: (i deleted this)
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
from then, i attempted an (
fastboot oem rebootRUU) and go this..
E:\adb>fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [ERR] partition_read_emmc(562): error 1
(bootloader) Start Verify: 0
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
OKAY [ 10.076s]
finished. total time: 10.076s
with me is RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651 .18_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_44 6215_signed_2
but cant have a way of flashing it because it doesn't reboot to boot loader!
please help me on how to run through this.
much appreciated.
In the first lines you say it boots to H-Boot and in the last lines you say it doesn't boot to the bootloader.
Hboot and bootloader are the same. So where does it boot to and where does it not ?
Put it in the hboot/bootloader - fastboot USB menu and execute the RUU.exe from the PC .....
For a ruu you don't have to be in the fastboot oem rebootRUU mode
Mr Hofs said:
In the first lines you say it boots to H-Boot and in the last lines you say it doesn't boot to the bootloader.
Hboot and bootloader are the same. So where does it boot to and where does it not ?
Put it in the hboot/bootloader - fastboot USB menu and execute the RUU.exe from the PC .....
For a ruu you don't have to be in the fastboot oem rebootRUU mode
Click to expand...
Click to collapse
sorry, but i'd always think H-boot is one where i choose between options, whilst boot-loader is the dark screen where's the progress bar during a flash operation!
putting it right, the machine never reboots to RUU mode.
thanks for the info.
You don't have to be in the RUU mode at all to execute the ruu. If you have the ruu.exe you can do it like i previous posted, if you have the ruu.zip you can do it via the external SD card by renaming the zip file. Can't remember the exact name. Check for RUU.zip via sd card.
Thanks much Mr. Hofs for the support, lemme get with the zip option.,, will post results as soon

HTC m8 phone keeps booting into fastboot mode

hello,
after root my phone
every time i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
please help me !!
Need more info.
What version SuperSU? What version TWRP?
What "official update" file did you use? Was it an OTA or an RUU (list the exact file name)?
Also, do fastoboot getvar all, and post the results (delete IMEI and serial number before posting).
redpoint73 said:
Need more info.
What version SuperSU? What version TWRP?
What "official update" file did you use? Was it an OTA or an RUU (list the exact file name)?
Also, do fastoboot getvar all, and post the results (delete IMEI and serial number before posting).
Click to expand...
Click to collapse
HI
Pls refer Bellow details
C:\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.213311771.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.82.401.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mels_tuhl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B81000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8d01ca6e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
In addition to the fastboot output, I asked 4 questions, none of which you answered.
You have the M8 eye, not the "standard" M8. Far as I can tell (not many folks on xda have the "eye") you need a special version of TWRP for this version. You can try the right version TWRP, and flash SUperSU again, see if that helps. No idea if this version TWRP will work on not (can't personally vouch for it): https://forum.xda-developers.com/htc-one-m8/general/m8-eye-recovery-root-t3159648
Depending on what you did to the phone by flashing the wrong TWRP, it's hard to tell what the proper way to proceed.
redpoint73 said:
In addition to the fastboot output, I asked 4 questions, none of which you answered.
You have the M8 eye, not the "standard" M8. Far as I can tell (not many folks on xda have the "eye") you need a special version of TWRP for this version. You can try the right version TWRP, and flash SUperSU again, see if that helps. No idea if this version TWRP will work on not (can't personally vouch for it): https://forum.xda-developers.com/htc-one-m8/general/m8-eye-recovery-root-t3159648
Depending on what you did to the phone by flashing the wrong TWRP, it's hard to tell what the proper way to proceed.
Click to expand...
Click to collapse
Hi
It's work
Thanks for your support
redpoint73 said:
In addition to the fastboot output, I asked 4 questions, none of which you answered.
You have the M8 eye, not the "standard" M8. Far as I can tell (not many folks on xda have the "eye") you need a special version of TWRP for this version. You can try the right version TWRP, and flash SUperSU again, see if that helps. No idea if this version TWRP will work on not (can't personally vouch for it): https://forum.xda-developers.com/htc-one-m8/general/m8-eye-recovery-root-t3159648
Depending on what you did to the phone by flashing the wrong TWRP, it's hard to tell what the proper way to proceed.
Click to expand...
Click to collapse
hi
can i have stock recovery download link in that phone pls
I have a similar issue, but with a standard M8
£10 off ebay, so not expecting ,much (also means no known history) . 1 week old noob reading here and flashing phones
1) only boots to fastboot, and even does this when you leave it powered off, but charging.
2) select hboot, then to recovery, recovery doesn't run, just resets back to fastboot eventually, after screen goes white not black.
3) can partially speak to phone in fastbook and get versions ok (included below)
Getver all as below:
C:\Program Files (x86)\Minimal ADB and Fastboot>
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA615WM01404
(bootloader) imei: 357336060194484
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.114s
4) never been able to boot to full o/s so not in developer mode, so cant get response in adb (and dont know how to use this anyway)
5) tried RUU.exe - fails with usb error after it tries to restart bootloader
6) tried ruu.zip from memory card - fails with partition update fail
7) tried fastboot recovery image 6.12.401.4 and it fails to write - error is 'remote:signature verify fail'
8) random google lead me to fastboot oem reboot RUU which does this:
E:\android tools>fastboot oem rebootRUU
...
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 786432
(bootloader) [SD_ERR] sd_read_sector: read sector failed (786432 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 3
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 786432
(bootloader) [SD_ERR] sd_write_sector: write sector failed (786432 256)
OKAY [ 10.052s]
finished. total time: 10.053s
9) htcdev unlock bootloader didnt work initially but has done now - is this a path i should try?
aim is to get a standard phone working again
Thanks
G
ok got my unlock token, seemed to flash it, but no status change/reaction on phone and rebooting still shows locked
E:\android tools>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.125s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ -0.000s]
finished. total time: 0.125s
G
My responses to some of your points below, in red font:
gda_scooby said:
(bootloader) version-main: 6.12.401.4
4) never been able to boot to full o/s so not in developer mode, so cant get response in adb (and dont know how to use this anyway) That is correct, you will not be able to use adb unless you can boot to OS or alternately TWRP custom recovery. So you are basically limited to fastboot in the current condition.
5) tried RUU.exe - fails with usb error after it tries to restart bootloader There isn't a valid exe format RUU for your version number (6.12.401.4) so you are probably using the wrong RUU. What is the version number or file name for the RUU.exe?
6) tried ruu.zip from memory card - fails with partition update fail Exactly what partition(s) is it failing to update? What is the version RUU you are using? The only valid one for your version would be the RUU.zip from here: https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
7) tried fastboot recovery image 6.12.401.4 and it fails to write - error is 'remote:signature verify fail' You can't flash an unsigned recovery image, unless the bootloader is unlocked. It also seems you are trying to flash stock recovery, and I don't see how that is going to help your current condition.
Click to expand...
Click to collapse
I think your best bet right now, is to try the correct RUU.zip which I linked above.

M8 stuck in bootloader

My phone was rooted with an unlocked bootloader but I unrooted it and relocked it. After relocking the bootloader it is stuck in fastboot mode. I tried RUU, doesn't work. In the bootloader screen it says "Software status: Modified, RELOCKED, Security Warning"
Please help
This is the expected result of locking the bootloader. Locking the bootloader makes the device stuck in fastboot, as it expects the RUU to be run immediately after.
To troubleshoot why the RUU didn't work, we would need more info:
1) What RUU number
2) Reason for failure. Where did it get stuck? Were there any error messages, and if so, what exactly were the error messages?
3) Do fastboot getvar all, and post the results (delete IMEI and serial number before posting)
redpoint73 said:
This is the expected result of locking the bootloader. Locking the bootloader makes the device stuck in fastboot, as it expects the RUU to be run immediately after.
To troubleshoot why the RUU didn't work, we would need more info:
1) What RUU number
2) Reason for failure. Where did it get stuck? Were there any error messages, and if so, what exactly were the error messages?
3) Do fastboot getvar all, and post the results (delete IMEI and serial number before posting)
Click to expand...
Click to collapse
This is the RUU:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4
Error 130: Wrong ID model
I do realise I could have downloaded the wrong RUU I am very new at this but I have no idea which RUU is the correct one.
viktoria96 said:
This is the RUU:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4
Error 130: Wrong ID model
I do realise I could have downloaded the wrong RUU I am very new at this but I have no idea which RUU is the correct one.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.041s
viktoria96 said:
This is the RUU:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4
Error 130: Wrong ID model
I do realise I could have downloaded the wrong RUU I am very new at this but I have no idea which RUU is the correct one.
Click to expand...
Click to collapse
There are dozens of RUUs for the M8; and the RUU needs to be specific for your version of the M8. So picking just any RUU is probably not going to work.
Unfortunately, your version does not seem to have RUU (at least not for free). But you have been given some suggestion on how to recover, in another thread you posted in:
https://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8-questions-t2897783/page555
redpoint73 said:
There are dozens of RUUs for the M8; and the RUU needs to be specific for your version of the M8. So picking just any RUU is probably not going to work.
Unfortunately, your version does not seem to have RUU (at least not for free). But you have been given some suggestion on how to recover, in another thread you posted in:
https://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8-questions-t2897783/page555
Click to expand...
Click to collapse
Actually I found the correct RUU here:
https://community.htc.com/tw/chat.php?mod=viewthread&tid=73269
and it worked.
viktoria96 said:
Actually I found the correct RUU here:
https://community.htc.com/tw/chat.php?mod=viewthread&tid=73269
and it worked.
Click to expand...
Click to collapse
Nice work finding it. I did say there doesn't "seem" to be an RUU (and I used that phrasing for a reason), but there is always a chance of another source, user posted leak, or whatever. And my search abilities obviously don't extend to websites written in languages I don't speak/read.
redpoint73 said:
This is the expected result of locking the bootloader. Locking the bootloader makes the device stuck in fastboot, as it expects the RUU to be run immediately after.
To troubleshoot why the RUU didn't work, we would need more info:
1) What RUU number
2) Reason for failure. Where did it get stuck? Were there any error messages, and if so, what exactly were the error messages?
3) Do fastboot getvar all, and post the results (delete IMEI and serial number before posting)
Click to expand...
Click to collapse
I HAve the same problem
*Ruu Number - 4.16.401.13
*error - writing 'zip'... (bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
*Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__002
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can You HElp ME with the problem please?
Tharinduroshan said:
I HAve the same problem
*Ruu Number - 4.16.401.13
*error - writing 'zip'... (bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
*Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
Click to expand...
Click to collapse
Signature verify fail is possibly due to unlocked bootloader (needs to be relocked or locked to run RUU with s-on). But it doesn't matter, since that RUU won't work. I can tell from your current baseband number, that a later firmware is installed (Marshmallow) and you can't run a lower version RUU (4.16.401.13 is Lollipop) with s-on.
The following RUU and process should work on your device: https://forum.xda-developers.com/htc-one-m8/help/help-htc-one-m8-bricked-t3298412
redpoint73 said:
Signature verify fail is possibly due to unlocked bootloader (needs to be relocked or locked to run RUU with s-on). But it doesn't matter, since that RUU won't work. I can tell from your current baseband number, that a later firmware is installed (Marshmallow) and you can't run a lower version RUU (4.16.401.13 is Lollipop) with s-on.
The following RUU and process should work on your device: https://forum.xda-developers.com/htc-one-m8/help/help-htc-one-m8-bricked-t3298412
Click to expand...
Click to collapse
thanks, ill try it

Help needed HTC M8S (M8QL) O2 UK

Hi!
I have an M8QL O2 UK, stuck in fastboot (the previous owner, i think try to root and failed). It have no recovery (if i try recovery just restart in fastboot again, i try to unlock bootloader using HTCDev but after is restarting it just goes blank and is not unlocking so i cannot flash any type of recovery.
I managed to get this firmware 0PKV[email protected]60201_20.05_018_F_release_477134 _signed_2_4.zip
but unfortunately it give me "device halted due to large image update fail" when i try to installing from microsd and this error when i try with fastboot
D:\m8s original>htc_fastboot flash zip 0PKV[email protected]60201_20.05_018_F_release_477134_signed_2_4
sending 'zip'... (177278 KB) OKAY
sending time = 8.194 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 21(s)
As i find out from other threads this error occurred because it have an older version of Hboot, so I will need to flash first an "partial zip firmware" to update Hboot, and then the complete firmware. But i cannot find anywhere that partial zip!
Does anybody can help me find that file?
One of this i think:
0PKV[email protected]60201_20.05_018_F_release_477134_partial
0PKV[email protected]60201_20.05_018_F_release_477134_signed_Hboot
My getvar
htc_fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.21.206.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxx
(bootloader) imei: xxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7900fbfd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
all: Done!
Thank you!
Hi
I am on O2 uk and I flashed this with fastboot but my phone is unlocked.
I will give it a try but i don't think will work because is for M8 not for M8S!
Thank you anyway!
cossty said:
I will give it a try but i don't think will work because is for M8 not for M8S!
Thank you anyway!
Click to expand...
Click to collapse
Have you seen this
https://forum.xda-developers.com/ht...ral/make-custom-recovery-htc-one-m8s-t3114245
https://ruu.lalleman.net/HTC_M8S(QL...08_15.00_016_F_release_434688_combined_signed
Yes I have seen and try all of that but as I said in my post I can't install any recovery, and the firmware of my phone, if you read carefully getvar details, is newer that firmware posted on https://ruu.lalleman.net/ and it cannot be install.
Also I already said that I find the latest firmware 0PKVIMG_M8_QL_UL_M60_SENSE70_MR_O2_UK_2.10.206.1_R [email protected]_20.05_018_F_release_477134 _signed_2_4.zip but because my Hboot it's old it give me the error posted on the initial post!
So please read carefully and understand all the thing written in the initial post first!
Thanks!

Categories

Resources