Develop Bugs

deleted lg home

hi so i had deleted lg home on my lg optimus c and rebooted my phone. now it is stuck on boot. i have no control after that. if i take out battery and replace it and turn it on it goes through the whole turning on proccess shows the carrier and the lg android screen but after that it just repeats. it does not go any further than that. im a little worried i ruined my phone.. can anyone please give me some info on how to fix if even possible. thanks so much xda-members
-- [email protected]
repost or email me please if you have answers

Wrong device forum but I'll try to help you anyway... Couple questions first... Have you rooted the phone? Have you installed a custom recovery partition?

dbarrera said:
Wrong device forum but I'll try to help you anyway... Couple questions first... Have you rooted the phone? Have you installed a custom recovery partition?
Click to expand...
Click to collapse
sorry i am a little new to forums. yes my phone is rooted and i dont believe i downloaded a custom recovery partiton. to be honest im not to sure what that is... thanks for trying to help buddy.

Ok... By your answers then I know you kinda screwed, but not quite dead... what happens exactly is that you removed the main launcher, the interface between you and the device... if you say that it reboots, not much we can do here be cause we may push a launcher APK to /system/app (generally, there is where the "system apps" are located) and see if phone lives again, but as it is rebooting not sure if it can be done... Have critical info in the phone? If not, you can restore it to factory state!
Here is a external guide to restore the device back to factory state: http://www.lg-phones.org/how-to-downgrade-lg-optimus-c-back-to-stock.html
Additionally, you can check some other info in this post (not quite your case but sometimes other problems have some clues to resolve main problem): http://www.cricketusers.com/cricket...tboot-mode-started-udc_start-3.html#post12007
Keep us posted!
---------- Post added at 05:51 PM ---------- Previous post was at 05:40 PM ----------
There is one last option... Researching...
---------- Post added at 06:18 PM ---------- Previous post was at 05:51 PM ----------
Damn, no fastboot mode (at least you can't boot into it)...
Anyways, there is nothing worst than haven't tried at all... Do you have the Android SDK installed? Check http://developer.android.com and install the SDK; also download a custom recovery from here: http://unleashedprepaids.com/media/MS690/recovery.img... Once done that, remove battery from phone, replace it, in a command prompt (or terminal if using Linux), write this command "adb shell", just write it, don't press enter yet. Connect the phone to the PC and turn the phone on, while booting, press enter to the command and follow the guide here: http://playfuldroidz.com/wiki/index.php?title=CM74OC#How_to_Install_ClockworkMod_Recovery: as fast as you can (copy/paste preferably)... if everything went well, now you have a custom recovery and you can backup the mess the phone is at right now (BACKUP, really, do it)... download and install any new custom rom and you are good to go...
Let me know how it went...

thanks so much havent tried yet but that route sounds like it might work. i am a little confused in some areas but after i read it over and over i will comprehend it a little more. i will follow step by step and let you know how it turned out. again thanks buddy. you brought some light into this dark matter.

The worst case scenario is using the KDZ updater.You can google all info on that

I wonder what happened to this guy...

dbarrera said:
I wonder what happened to this guy...
Click to expand...
Click to collapse
Yeah its been a ling time and no response.Perhaps hes occupied with other things?
Sent from my LG-P350 using xda premium

Probably... Btw, the Optimus C doesn't use KDZ Updater but a different utility...
Sent from my LG-P350 using Tapatalk 2

dbarrera said:
Probably... Btw, the Optimus C doesn't use KDZ Updater but a different utility...
Sent from my LG-P350 using Tapatalk 2
Click to expand...
Click to collapse
if he still have this problem then maybe this guide can help this user
http://forum.xda-developers.com/showthread.php?t=1200122

sweet! i wonder why that thread didn't come up when I was researching... anyways, good to have new ideas...

Installed CyanogenMod on my HTC One V. Jelly Bean comes up, but reboots after

The title says it all. I rooted, and went through the steps here ( http://forum.xda-developers.com/showthread.php?t=1819040[1] ). Jelly Bean installed and runs, but once booting and entering the OS it reboots after a few seconds. Can someone please point me in a direction on how to fix this, or tell me the problem. Thank you.

wich kernel have u installed ?

#DIO said:
wich kernel have u installed ?
Click to expand...
Click to collapse
Try this one as it is currently supported aswell and is the latest version of android at ts base
http://forum.xda-developers.com/showthread.php?t=2147407

Worked, but still restarting. Please help.
Abdullah1997 said:
Try this one as it is currently supported aswell and is the latest version of android at ts base
http://forum.xda-developers.com/showthread.php?t=2147407
Click to expand...
Click to collapse
Hello.
I tried wiping everything and doing this, and basically it worked. But it is still rebooting, at what seems to be, the same time after loading each time. It will run for a while, and then after maybe 20-30 seconds, it will lag once, and then continue for ~2 seconds, and then lag again, and then turn off and reboot. It did this during CyanogenMod installation, and is doing it now in the OS. I can navigate the OS, apps, etc, for a few seconds until it restarts.
Any help you, or anyone else, could give would be wildly appreciated. I hope we can solve this so I can use my phone again, thank you all for your time.
EDIT:
My story, as short as possible. I got a new HTC One V from Virgin Mobile. Wanted to install Jellybean. Rooted it and installed ClockWorkMod. Used ClockWorkMod and normal methods to install a ROM of Cyanogen I found (listed in OP). That didn't work, kept rebooting as mentioned in OP. Deleted everything. Tried RUU stuff without really knowing what I was doing. Didn't work as expected. Gave up. Tried this Cyanogen ROM posted above. Still rebooting.
If you need anymore information about my phone model, or something else, just ask. I really need to get this fixed so I can use my phone. Thank you all again for your help.

You have to copy the boot.img from the ROM zip and paste it in your fastboot window and run command
fastboot flash boot boot.img
---------- Post added at 10:19 PM ---------- Previous post was at 10:17 PM ----------
And read the forums before posting what thousands of other had already asked....and gotten answered.... XDA RULES

[Q] fastboot boot.img help?

Ok i've flashed 100's of boot.img's but i've never encountered this.
Fastboot flash boot boot.img
sending
Phone show the little loading bar. Nothing happens. I waited about 3 minutes and still nothing. So i stopped it. Tried multiple times same thing. Used a different .img same thing. Googled and searched the website for it and found nothing. I have all my req drivers for my htc and fastboot. I have my rom on the phone and installed i just need to get my fastboot to send my boot.img.....
My phone is Virgin mobile usa CDMA btw.

Are you bootloader unlocked,?
Did you make sure you have ADB AndroidDebuggingBridge enabled?
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Also, first send cmd
Code:
fastboot devices
and make sure it recognizes your phone. It will return your phone serial number if it does

russellvone said:
Are you bootloader unlocked,?
Did you make sure you have ADB AndroidDebuggingBridge enabled?
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Also, first send cmd
Code:
fastboot devices
and make sure it recognizes your phone. It will return your phone serial number if it does
Click to expand...
Click to collapse
Yeah solved. Thanks.

Android#! said:
Yeah solved. Thanks.
Click to expand...
Click to collapse
People with the same problem will be grateful for the solution, even if its because you missed a step. Google indexes this forum quite quickly, so they will end up here. Could you share your solution so that others can benefit from your problem resolution.
sent from a phone that's running a rom

mrcorey said:
People with the same problem will be grateful for the solution, even if its because you missed a step. Google indexes this forum quite quickly, so they will end up here. Could you share your solution so that others can benefit from your problem resolution.
sent from a phone that's running a rom
Click to expand...
Click to collapse
Wrong Gapps version was the solution for me. Was really weird. Also don't try to install fm radio manually. That was the original cause.

System Prop to disable high volume warning?

Does anyone know the system.prop to disable the high volume warning? I see in this Magisk Module that it modifies
Code:
audio.safemedia.bypass=true
but that doesn't seem to work on Samsung firmware. I remember finding the alternative setting somewhere, but I had to flash stock firmware and lost it, and can't seem to find it again.

By the time you are using Magisk instead of SuperSu just download the module ... If you want to do it by yourself just download BuildCrop from PlayStore, find the line,change it and you are done !
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
DaleSwanson said:
Does anyone know the system.prop to disable the high volume warning? I see in this Magisk Module that it modifies
but that doesn't seem to work on Samsung firmware. I remember finding the alternative setting somewhere, but I had to flash stock firmware and lost it, and can't seem to find it again.
Click to expand...
Click to collapse
And if I'm not wrong you will find the same code with the difference that it will has true instead of false. I have not tried such a thing before so do it with your own risk

Andriano24 said:
By the time you are using Magisk instead of SuperSu just download the module ... If you want to do it by yourself just download BuildCrop from PlayStore, find the line,change it and you are done !
And if I'm not wrong you will find the same code with the difference that it will has true instead of false. I have not tried such a thing before so do it with your own risk
Click to expand...
Click to collapse
I do have the module, but it doesn't work (other comments on the thread have noted other Samsung phones it doesn't work for). I was planning on just changing the line the module edits to the line Samsung uses. Do you know what it is?

I really don't want you to boot loop or something like that... So in... Let's say 12 hours I will provide you a way to remove that option. I may boot loop but I really don't care, I'm gonna install a new room anyways

Andriano24 said:
I really don't want you to boot loop or something like that... So in... Let's say 12 hours I will provide you a way to remove that option. I may boot loop but I really don't care, I'm gonna install a new room anyways
Click to expand...
Click to collapse
I was just in a boot loop, and just reflashed stock rom (which is why I need this setting, cause I had it before, but lost it). Thanks for the concern, but this is the ideal time to boot loop.

DaleSwanson said:
I was just in a boot loop, and just reflashed stock rom (which is why I need this setting, cause I had it before, but lost it). Thanks for the concern, but this is the ideal time to boot loop.
Click to expand...
Click to collapse
Ahahaha I feel you man. But something is stared getting on my nerves !!! I don't know if it is because I'm running Android 7.0 instead of Android 6.0, but I tried editing build.prop by adding a line on it...
audio.safemedia.bypass=true
But it does not seems to be working ... I found a threat on Reddit about that but they werre based on Android 6.0 .... So I have no idea what to do (you can download an app from PlayStore or even download Xposed and download a module ...) But it is even worth it ?
---------- Post added at 02:12 AM ---------- Previous post was at 01:58 AM ----------
Hahaha stupid me ! https://forum.xda-developers.com/apps/magisk/module-volume-steps-increase-magisk-v10-t3554996/page5
Go there and download the file on that page, and then flash it , I'm gonna try it! If I won't be back at least in 10 minutes , that means I ran intro a boot loop
---------- Post added at 02:16 AM ---------- Previous post was at 02:12 AM ----------
None of those flashable files seems to work. I'm truly sorry ... Maybe just go and ask the OP of that threat instead

BND-L24

is there any possible way to download firmware for the honor 7x BND-L24 since i bricked mine and all i could find is all the other models just not the one i need.

Not as of yet. I am hoping there will be something soon myself.

we just need someone who still haven't done anything to their phone, and kept a clean backup of everything. Or someone need to reset their phone in order to make the back up. We can download it and use it for our self like new 7x L-24

^ This. Please someone be the hero we need! Lol.

John0074 said:
we just need someone who still haven't done anything to their phone, and kept a clean backup of everything. Or someone need to reset their phone in order to make the back up. We can download it and use it for our self like new 7x L-24
Click to expand...
Click to collapse
Is it possible to make a back up of stock firmware without root or twrp? Just curious.

kingd421 said:
Is it possible to make a back up of stock firmware without root or twrp? Just curious.
Click to expand...
Click to collapse
ya i just checked today. you can do it either way. I am thinking about buying another one to check out my theory.

Anyone tried installing other variations (such as the Indian Roms) to see if it works?

I got ahold of support for Huawei US and they told me mid-March was when they plan to release the stock firmware for the Honor 7x. Hopefully will be released within the next week, 2 at most. Mine isn't bricked, but I am using a really botched custom ROM(no bluetooth, camera, fingerprint reader and Google services do not work, so I have to sideload all my apps, the battery is also crap on the custom rom and the phone heats up a lot faster) I can't wait until they release it, it was my fault that I didn't make a nandroid backup, though, tbf. Won't be too much longer, though <3
---------- Post added at 04:50 PM ---------- Previous post was at 04:40 PM ----------
Here's a screenshot of the support who told me Mid-March. I couldn't directly post it because under 10 posts, but it's quoted here.
imgur(DOT)com/a/uYYuM
Click to expand...
Click to collapse

Jeffrey2457 said:
I got ahold of support for Huawei US and they told me mid-March was when they plan to release the stock firmware for the Honor 7x. Hopefully will be released within the next week, 2 at most. Mine isn't bricked, but I am using a really botched custom ROM(no bluetooth, camera, fingerprint reader and Google services do not work, so I have to sideload all my apps, the battery is also crap on the custom rom and the phone heats up a lot faster) I can't wait until they release it, it was my fault that I didn't make a nandroid backup, though, tbf. Won't be too much longer, though <3
---------- Post added at 04:50 PM ---------- Previous post was at 04:40 PM ----------
Here's a screenshot of the support who told me Mid-March. I couldn't directly post it because under 10 posts, but it's quoted here.
Click to expand...
Click to collapse
Be careful because I was using that same custom Oreo rom and now my Honor 7x is pretty much completely bricked... The rom started crashing and bootlooping on startup and TWRP stopped working too. It just flickers with a dead Android icon when I try to do Power + Volume Up. I can get into the eRecovery and fastboot but I'm not sure if I'll be able to fix it at this point. I just ended up ordering a new phone last night...

ekovv said:
Be careful because I was using that same custom Oreo rom and now my Honor 7x is pretty much completely bricked... The rom started crashing and bootlooping on startup and TWRP stopped working too. It just flickers with a dead Android icon when I try to do Power + Volume Up. I can get into the eRecovery and fastboot but I'm not sure if I'll be able to fix it at this point. I just ended up ordering a new phone last night...
Click to expand...
Click to collapse
Yeah, I'm on currently using it because I was stupid and didn't make a backup and have no way to go back to stock until they release it. I've had to reinstall this ROM about 6 times already in the past 2 weeks just because of boot loops, freezing, and corruption. TWRP also broke on me, but was lucky enough to be able to flash it back with ADB and then reinstall AOSP. I'll definitely try it out again in the future, but I think I'll leave it to those who are more willing to risk it than me lol, at least, until it has a good bill of health for usage.

Jeffrey2457 said:
Yeah, I'm on currently using it because I was stupid and didn't make a backup and have no way to go back to stock until they release it. I've had to reinstall this ROM about 6 times already in the past 2 weeks just because of boot loops, freezing, and corruption. TWRP also broke on me, but was lucky enough to be able to flash it back with ADB and then reinstall AOSP. I'll definitely try it out again in the future, but I think I'll leave it to those who are more willing to risk it than me lol, at least, until it has a good bill of health for usage.
Click to expand...
Click to collapse
Hmm, nice. I did reinstall TWRP with adb, but it still didn't work. Was there anything special you had to do?

Not sure if it would help, but i have a fresh Mate SE arriving tomorrow I could rip a clean dump off of. Which I planned on doing anyway before I did any setup of the device.

ekovv said:
Hmm, nice. I did reinstall TWRP with adb, but it still didn't work. Was there anything special you had to do?
Click to expand...
Click to collapse
Nope, I did it the same way I did it when I first installed AOSP(Errr, relatively, anyway. I originally installed TWRP to install SuperSU Root, but when I disabled root, I somehow bricked my phone, which is why I resorted to AOSP lol, but I installed it by just wiping the encryption and data with TWRP and the installing via the AOSP Image and it worked fine... Sorta... Best AOSP does rn anyway lol)

I do have TWRP backup of system, boot, and data .img for the honor 7x BND-L24 USA. Twrp would came back with error 255 for the data file but looks like it still copied It, So I have

chrisn812 said:
Not sure if it would help, but i have a fresh Mate SE arriving tomorrow I could rip a clean dump off of. Which I planned on doing anyway before I did any setup of the device.
Click to expand...
Click to collapse
I'm in dire need of a clean dump for the Mate SE. Bricked it the day I got it. If you have this, I'd love you forever

Got what you all need
Milly7 said:
Not as of yet. I am hoping there will be something soon myself.
Click to expand...
Click to collapse
I learned from when I had the honor 6x to make a back up first. When I unbricked it I took I returned it got the 7x BND-L24 got twrp installed and made a backup of Sustem, Boot, and data. Hit thanks If you want it and I will post Direct Download link

BiggDipper said:
I learned from when I had the honor 6x to make a back up first. When I unbricked it I took I returned it got the 7x BND-L24 got twrp installed and made a backup of Sustem, Boot, and data. Hit thanks If you want it and I will post Direct Download link
Click to expand...
Click to collapse
Yes, please post a direct link. It will be greatly appreciated.

stock firmware coming next week
Hey folks, just wanted to let you know I got in touch with customer service and they gave me a release date of either March 26 or March 30 for stock firmware. Conversation is attached.

Honor 7x Firmware Backup
Milly7 said:
Yes, please post a direct link. It will be greatly appreciated.
Click to expand...
Click to collapse
I am zipping it now then I will get it uploaded to Gdrive. Then I will make a thread post it up then come back with a link to the thread. You have been here for awhile I am new. Any pointers you can give me to help me make the thread would be greatly appreciated.

BiggDipper said:
I am zipping it now then I will get it uploaded to Gdrive. Then I will make a thread post it up then come back with a link to the thread. You have been here for awhile I am new. Any pointers you can give me to help me make the thread would be greatly appreciated.
Click to expand...
Click to collapse
I have only created a couple of threads, but I recall it being very easy to do. You just want to make sure you post it in the correct section. I would think you could post this in the general section. News, discussion, etc.