Develop Bugs

Application unlock problem - HTC S621 from Rogers

Hi,
I have the HTC S621 from Rogers in Canada. I tried to install Route66 Navigator 7 and it sayed that it couldn't modify some registery keys, so i tried to application unlock my s621 and with all the fixes and utility on the web nothing worked.
Is there a way to application unlock the S621 from rogers?
I don't need to fully unlock the phone, just application unlock would do for me.
thanks for your help and time.

Unfortunately you have to unlock your phone (CID,SIM) before the app unlock will work. I had the same issue and did not find any workaround... On the other hand, if you're going to fully unlock your phone, may I suggest flashing to an S620... To provent further issues. Read the step by step in the forums on how to complete your flash first or else you get a Euro keypad.
HTC S620 ROM : http://rapidshare.com/users/7UE30C

That makes three of us.
I did the same thing.
Paid for the unlock, then i was able to app unlock the phone.

Well i guess that i will have to do that then.
But putting the original HTC S620 WM5 or WM6 on my HTC will it improve speed? functionnalities? Or just make it possible to install any application and put in any SIM card that i want??
I just don't want to pay again, and get so little improvement.

Executing Programs...
How do you execute the unlocker? Install on sd card then run app from pc? Or run from phone? How about the new rom? Not very clear on how to run these programs with active sync. First smartphone

MY question is... if I pay for the app unlock, and then install a ROM (say the T-Mobile WM6 beta or something of the sort) if that ROM has the locks in place again, do I have to pay AGAIN to re-unlock my phone apps?
Because that would really suck.

climo said:
How do you execute the unlocker? Install on sd card then run app from pc? Or run from phone? How about the new rom? Not very clear on how to run these programs with active sync. First smartphone
Click to expand...
Click to collapse
run the unlocker staright from your pc when your phone is plugged in and after it syncs. you dont need to put anything on the sd card at all. on your phone you will be asked if you want to install, hit yes, etc. same as running an install from your phone after that..

NOTORIOUS VR said:
MY question is... if I pay for the app unlock, and then install a ROM (say the T-Mobile WM6 beta or something of the sort) if that ROM has the locks in place again, do I have to pay AGAIN to re-unlock my phone apps?
Because that would really suck.
Click to expand...
Click to collapse
app unlock is free, CID/sim unlock is what costs money. you wouldn't have to pay to CID/sim unlock your phone it still will be. plus you have the unlocker already anyways. and you wouldn't pay for the app unlock cause it's free anyways.

never mind.. just read it over and everything made sense..
BTW, Could I get the phone unlocked from my provider? Do they just need to give me an unlock code or something? Or is the best bet getting it unlocked by a 3rd party?

NOTORIOUS VR said:
The problem is I can't application unlock my phone for some reason... just like the OP if I run it (even using u'r instructions above) it doesn't work. It gives me the error message Phone is not unlockable
I've tried doing it manually through the Registry as well... but I get an access denied error message when trying to store the values.
Is there any other way to get around this? It's really annoying that I can't install certain things.
Click to expand...
Click to collapse
I was only telling you what you're going to be paying for, sounded like you said you were going to pay for app unlock...
MY question is... if I pay for the app unlock,
is what you said. I wasn't trying to solve the problem, cause I've never hit that problem.

ovcrash said:
Hi,
I have the HTC S621 from Rogers in Canada. I tried to install Route66 Navigator 7 and it sayed that it couldn't modify some registery keys, so i tried to application unlock my s621 and with all the fixes and utility on the web nothing worked.
Is there a way to application unlock the S621 from rogers?
I don't need to fully unlock the phone, just application unlock would do for me.
thanks for your help and time.
Click to expand...
Click to collapse
If you use the signed registry editor from HTC you could have app unlocked.
See here:
http://www.modaco.com/INFO_Decert_SIM_Unlock_C550-t222786.html
Thats the proper way to do it.

NOTORIOUS VR said:
never mind.. just read it over and everything made sense..
BTW, Could I get the phone unlocked from my provider? Do they just need to give me an unlock code or something? Or is the best bet getting it unlocked by a 3rd party?
Click to expand...
Click to collapse
It's cool.
And I think if they would just unlock it for you it would go against the reason they put the lock on it, to keep you with them. So I believe only 3rd party is the only way.

indiekiduk said:
If you use the signed registry editor from HTC you could have app unlocked.
See here:
http://www.modaco.com/INFO_Decert_SIM_Unlock_C550-t222786.html
Thats the proper way to do it.
Click to expand...
Click to collapse
That doesn't work on Rogers phones...

NOTORIOUS VR said:
That doesn't work on Rogers phones...
Click to expand...
Click to collapse
and you already tried this one? The SDA one? It's what I used.
edit: I don't know where I got it so I don't take cred for it obviously.

NOTORIOUS VR said:
That doesn't work on Rogers phones...
Click to expand...
Click to collapse
Aye it does. If it doesnt let you copy the exe on you need to copy the zip on and unzip the exe on your phone using an unzip utility.

oplitic said:
and you already tried this one? The SDA one? It's what I used.
edit: I don't know where I got it so I don't take cred for it obviously.
Click to expand...
Click to collapse
That won't work because it needs RAPI to be activated. You definately need to use the HTC registry editor I mentioned, that will def work. Post what your actual problem with that method is.

indiekiduk said:
Aye it does. If it doesnt let you copy the exe on you need to copy the zip on and unzip the exe on your phone using an unzip utility.
Click to expand...
Click to collapse
this is one that you execute from the comp when the phone is connected.
indiekiduk said:
That won't work because it needs RAPI to be activated. You definately need to use the HTC registry editor I mentioned, that will def work. Post what your actual problem with that method is.
Click to expand...
Click to collapse
I don't know what RAPI is...

Where could i get a good ROM to install on my new unlock S621 ?
or the question is, wich ROM do i use ?
I still want the phone to be usable.
Is there a way to backup my current ROM in case a problem happens ?
Thanks.

oplitic said:
this is one that you execute from the comp when the phone is connected.
I don't know what RAPI is...
Click to expand...
Click to collapse
RAPI is remote api, which is something that you execute from the comp when the phone is connected - i.e. why its called remote.
RAPI is disabled on most operator's branded phones, hence why your file doesn't work on the Rogers one. You need to unlock using the HTC registry editor i mentioned by running it on your phone.

indiekiduk said:
RAPI is remote api, which is something that you execute from the comp when the phone is connected - i.e. why its called remote.
RAPI is disabled on most operator's branded phones, hence why your file doesn't work on the Rogers one. You need to unlock using the HTC registry editor i mentioned by running it on your phone.
Click to expand...
Click to collapse
damn that sucks.

Flash Tmobile Dash from Bootloader?

Hey guys, I have an Excalibur that gets stuck on the TMobile splash screen when you try to turn the device on.
I've tried doing a hard reset, but I still end up with the same problem. I can get the phone into the bootloader mode (green, blue red) but everything I've searched around (read the wiki, tried google, youtube, etc.) says that I need to be connected to ActiveSync in order to flash a rom onto it.
Is there any way to flash this thing while in bootloader mode or am I screwed?
Thanks!!

Stickys, official roms & hard-reset bootloader.

Thanks for the quick response, Stylez!
I've read the "hard reset and bootloader" post, which is how I learned to put the device in bootloader mode (thanks to you!)
I've also downloaded the necessary ROM file and loader from the other sticky you mentioned. (I did read and search on my own before asking)
But when I try to run the ROMUpdateUtility.exe it tells me to connect the device to activesync which I can't really do because it's in Bootloader mode and WindowsMobile Device Center says it's not connected.

Try this.
Did you SDA and Surreal unlocked your cell prior to flashing?
If not, do so. You can find both files in the Wiki or in one of the stickies I am sure.
SDA Unlock it from desktop, reboot, Surreal, drag it in the device, install it, once installed... go to the ROM you chose and run the AUTO file, not RUU... you should follow the instructions of when to click on and the center button on the device, now, (this might occur) I know it does make the sound of restarting and when you load the ROM say v1.7a Ricky and Styles RoseROM, it won't go over 3% saying it can't find the device... just click on the RUU this time, and I bet you that this time it will find the device and load it. Try it and let me know.

When I run the SDA Unlock, the button remains greyed out because it doesn't recognize the device is connected to the computer. Is it supposed to even though it's on the bootloader screen?

The white bootloader screen is only needed when you flash a new ROM into it. You need to connect the device NOT in bootloader but just as is when turned on normally so that the ActiveSync will recognize it.

Same thing for Surreal, you just drag it in the phone and install it as you would install any .cab.

Inimical said:
Hey guys, I have an Excalibur that gets stuck on the TMobile splash screen when you try to turn the device on.
Is there any way to flash this thing while in bootloader mode or am I screwed?
Click to expand...
Click to collapse
Thanks, but unfortunately I can't get this thing to boot past the T-Mobile splash screen. Is there no way to flash it without Activesync?

Also, I'm in the Red/Green/Blue bootloader (hold the camera button and attach USB cable) not the White one.

So, you are running the T-Mobile flash, yet you can't go past the initial screen? Did you just get it like this or did you flash it before... ???
Did you try to run USPL CID BYPASS? It might get it into white bootloader mode, just assuming. If not, then do as I suggested, when it says it doesn't find the device, re-run the RUU. As posted above.

I got the phone like this from a friend. So, who knows what could be wrong with it.
The bootloader screen says it's running 1.22.0000 and as far as I know, it's the default TMobile rom.
It won't get passed the T-Mobile initial screen. It will just turn back off after a few minutes. I can get it into the Bootloader mode as mentioned before, so I assumed I'd be able to flash it to fix whatever is preventing it from booting fully.
It seems, however, that something more severe may be wrong with the phone if the computer can't register that it's connected which prevents me from running any kind of CID BYPASS programs or SDA Unlock utilities.
Any other suggestions?

I am gonna think about it, but hopefully the more expert in here will help you sooner. I personally think your buddy messed up while flashing or something. Because if he did not, then he can just send it back and get another one from T-Mo. Plus, not being there to see makes things a bit more complicated this once.

Are you even connected to ActiveSync when in bootloader mode? I don't mean you, I mean in general.
And btw, did you try to do what I suggested you?
Connect the phone, get it in bootloader, try to flash the T-Mo ROM and clickon AUTO.bat, an image is on the guide with pics sticky thread in here... that should open and ms-dos thing, even if it opens the loader and doesn't go over 3%, this time... click on the RUU icon.. it worked for me last night and for the T-Mo ROM you shouldn't need any sda or surreal stuff. Try it...
You can get the T-Mo ROM from their web-site or here too.
I know you can go on youtube and look up upgrade to kavana, there is a guy who has it for download. Thing is T-Mo asks you for a cell number to verify you are the owner of the phone so you might have to insert your friend's number.

Capitan Totti said:
Are you even connected to ActiveSync when in bootloader mode? I don't mean you, I mean in general.
Click to expand...
Click to collapse
No, while in bootloader and connected via USB, ActiveSync (WindowsMobile Device Center in Vista) says that there is no device connected.
Capitan Totti said:
And btw, did you try to do what I suggested you?
Connect the phone, get it in bootloader, try to flash the T-Mo ROM and clickon AUTO.bat
Click to expand...
Click to collapse
I tried this step, however, when the DOS box opens, it tells me it cannot find the phone and asks to try again. I do this repeatedly and get nothing. I also tried clicking NO on the retry, but nothing.
Capitan Totti said:
You can get the T-Mo ROM from their web-site or here too.
I know you can go on youtube and look up upgrade to kavana, there is a guy who has it for download. Thing is T-Mo asks you for a cell number to verify you are the owner of the phone so you might have to insert your friend's number.
Click to expand...
Click to collapse
Tried that too, I actually have T-Mobile so I put in my own number. I ended up with the same error message about not finding a phone. Is it supposed to find the phone when connected in Bootloader mode?
Thanks for your help, btw

Thanks for explaining that. I think you might have yourself a bit of a problem.
I'll ponder on it and let you know. Can't you return it in exchange for another Dash?

What ROM are you trying to flash? I would recommend that you go to T-Mobile.com/wmupgrade and download the current Officially Dash ROM and recover the device that way. If you do not have a T-Mobile phone number, I can get you one that you may use to access the download page.
Once you reflash the official rom I recommend you do the CID unlock and flash a 6.1

stellarvelocity said:
What ROM are you trying to flash? I would recommend that you go to T-Mobile.com/wmupgrade and download the current Officially Dash ROM and recover the device that way. If you do not have a T-Mobile phone number, I can get you one that you may use to access the download page.
Once you reflash the official rom I recommend you do the CID unlock and flash a 6.1
Click to expand...
Click to collapse
I recommend reading the thread before posting. All you proposed I already mentioned and he answered. Look above...

Looking to be pointed in the direction of a root for Galaxy Tab A6 sm-t280

Hey guys,
Been searching for a few days now ive tried several root methods
the ones from playstore like
Kingroot
Kingoroot
Kingoroot desktop
Its a galaxy tab a6 running android 5.1.1
Build number LMY47V.T280XXU0APB6
All of the above say they can root it but they all failed
I have seen posts on forums such as this one offering custom roms for the device so I must assume there is a root somewhere and I just cant find it.
Any help would be extremely apreceated

ilikenoodles321 said:
Hey guys,
Been searching for a few days now ive tried several root methods
the ones from playstore like
Kingroot
Kingoroot
Kingoroot desktop
Its a galaxy tab a6 running android 5.1.1
Build number LMY47V.T280XXU0APB6
All of the above say they can root it but they all failed
I have seen posts on forums such as this one offering custom roms for the device so I must assume there is a root somewhere and I just cant find it.
Any help would be extremely apreceated
Click to expand...
Click to collapse
Nope, no root for this device until an exploit is found.
Where is this custom rom you speak of?

I don't remember sorry
Is it likely one will be found a exploit I mean ?

ilikenoodles321 said:
I don't remember sorry
Is it likely one will be found a exploit I mean ?
Click to expand...
Click to collapse
I've tried everything possible so far to obtain root.
Hopefully eventually one of the apps like Kingroot will work.
Why the heck Samsung locked the bootloader on this device I have no bloomin idea!

Me either no contactless pay as no cellular so why ?
I got mine direct from Samsung and the bloat is horrific
8gb model and over half of it is unusable and without a root an sd card isent really much help
In essence I have gta sa installed and can't put anything else on its infuriating!

ilikenoodles321 said:
Me either no contactless pay as no cellular so why ?
I got mine direct from Samsung and the bloat is horrific
8gb model and over half of it is unusable and without a root an sd card isent really much help
In essence I have gta sa installed and can't put anything else on its infuriating!
Click to expand...
Click to collapse
It's still possible to customize the stock rom.
I have made some modifications to it and flashed no issues.
This means it can at least be debloated.

How would I do that exactly nothing I have tried has worked

Did you try with kingroot desktop?

mihailrusia said:
Did you try with kingroot desktop?
Click to expand...
Click to collapse
I did indeed.

mihailrusia said:
Did you try with kingroot desktop?
Click to expand...
Click to collapse
Like I said I have already tried all methods.
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
ilikenoodles321 said:
How would I do that exactly nothing I have tried has worked
Click to expand...
Click to collapse
Tried what?

Like all the things in android to move data and apps they all greyed out.
Cant u download the stock rom for a device modify it on your computer then flash it to your device ?
IS that a thing?

ilikenoodles321 said:
Cant u download the stock rom for a device modify it on your computer then flash it to your device ?
IS that a thing?
Click to expand...
Click to collapse
That's what I'm referring to. I have modified the stock rom image and reflashed it.

sweet! is there a guide to doing this im confident I can its just ive never done it before.

ilikenoodles321 said:
sweet! is there a guide to doing this im confident I can its just ive never done it before.
Click to expand...
Click to collapse
You're going to need to use Linux, recommend Ubuntu.

ashyx said:
That's what I'm referring to. I have modified the stock rom image and reflashed it.
Click to expand...
Click to collapse
ashyx said:
You're going to need to use Linux, recommend Ubuntu.
Click to expand...
Click to collapse
I've just bought a SN 280 Tab A6 and I've been looking to root it to be able to take off some of the apps I don't use.
Is there any root, twrp or cusmom ROM for this device?
Thanks
---------- Post added at 13:51 ---------- Previous post was at 13:50 ----------
ilikenoodles321 said:
sweet! is there a guide to doing this im confident I can its just ive never done it before.
Click to expand...
Click to collapse
Any news ?

gugas123 said:
I've just bought a SN 280 Tab A6 and I've been looking to root it to be able to take off some of the apps I don't use.
Is there any root, twrp or cusmom ROM for this device?
Thanks
---------- Post added at 13:51 ---------- Previous post was at 13:50 ----------
Any news ?
Click to expand...
Click to collapse
Did you even read this thread? :banghead:

ashyx said:
It's still possible to customize the stock rom.
I have made some modifications to it and flashed no issues.
This means it can at least be debloated.
Click to expand...
Click to collapse
Hello ashyx
I have the sm-T285m. Yes, I could not root it using the usual programs out there. Any way to inject root into the system image and then reflash it through odin? (as you mentioned you have managed to debloat it-maybe a dumb question as am sure you already looked into it) I recall trying to do such a thing on Huawei Mediapad x2 when there was no root but ran into issues after I accidentally overwrote my entire windows o/s and disk with linux and then gave up (had to extract files from image, add the su then recompile something like that?...from memory over a year back and was only my first and only foray into linux) The odin tar files are separate ones for modem, system, bootloader etc.
Thanks

mac231us said:
Hello ashyx
I have the sm-T285m. Yes, I could not root it using the usual programs out there. Any way to inject root into the system image and then reflash it through odin? (as you mentioned you have managed to debloat it-maybe a dumb question as am sure you already looked into it) I recall trying to do such a thing on Huawei Mediapad x2 when there was no root but ran into issues after I accidentally overwrote my entire windows o/s and disk with linux and then gave up (had to extract files from image, add the su then recompile something like that?...from memory over a year back and was only my first and only foray into linux) The odin tar files are separate ones for modem, system, bootloader etc.
Thanks
Click to expand...
Click to collapse
I already tried prerooting the system image.
It wont boot because the boot.img needs to be patched and you can't patch the boot.img on a bootloader locked device.
I even asked Chainfire if there was any other way and he said no.

ashyx said:
I already tried prerooting the system image.
It wont boot because the boot.img needs to be patched and you can't patch the boot.img on a bootloader locked device.
I even asked Chainfire if there was any other way and he said no.
Click to expand...
Click to collapse
Thanks Ashyx...you mentioned you managed to debloat it. I tried ext4unpacker (maybe archaic now though recall it worked on 5.0.2) to separate the system.img into components but could not. I am interested in editing system image
(A) change dpi (increase the lcd density to 380 or so to get things bigger),
(B) change system font (put in a preferred ttf font),
(C) remove many unneeded (for me) google apps from the system folder, and
(D) enable mobile data auto on off for mms via the features.xml or others.xml. Do you think these could be done (you already mentioned the debloat).
typically i managed to get all of the above done if rooted.
Any advice appreciated on how to do this unpacking and repacking.
Thanks
does this help? opensouce kernel?
(again maybe preaching to the choir but thought I'd ask-not knowledgeable here but posting if it helps in getting to a semi-rooted type state somehow)
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sm-t285
btw i 'managed' to get oem unlock to show as checked permanently...does that mean the bootloader is unlocked now? (cross flashed through odin the 285 on my 285m the system CP file...and reverted back to 285m-no difference though in network as modem was still 285m as was partition and BL-reflashed the BL as well separately for 285m-after all this shows oem unlock checked-when i got the device new it was unchecked)
edit...from what it appears, it means it CAN be unlocked, yes? but not actually unlocked?
http://forum.xda-developers.com/showpost.php?p=67361863&postcount=9

mac231us said:
Thanks Ashyx...you mentioned you managed to debloat it. I tried ext4unpacker (maybe archaic now though recall it worked on 5.0.2) to separate the system.img into components but could not. I am interested in editing system image
(A) change dpi (increase the lcd density to 380 or so to get things bigger),
(B) change system font (put in a preferred ttf font),
(C) remove many unneeded (for me) google apps from the system folder, and
(D) enable mobile data auto on off for mms via the features.xml or others.xml. Do you think these could be done (you already mentioned the debloat).
typically i managed to get all of the above done if rooted.
Any advice appreciated on how to do this unpacking and repacking.
Thanks
does this help? (again maybe preaching to the choir but thought I'd ask-not knowledgeable here but posting if it helps in getting to a semi-rooted type state somehow)
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sm-t285
btw i 'managed' to get oem unlock to show as checked permanently...does that mean the bootloader is unlocked now? (cross flashed through odin the 285 on my 285m the system CP file...and reverted back to 285m-no difference though in network as modem was still 285m as was partition and BL-reflashed the BL as well separately for 285m-after all this shows oem unlock checked-when i got the device new it was unchecked)
edit...from what it appears, it means it CAN be unlocked, yes? but not actually unlocked?
http://forum.xda-developers.com/showpost.php?p=67361863&postcount=9
Click to expand...
Click to collapse
It wont make any difference. Enabling OEM unlock doesn't unlock the bootloader.
You still wont be able to flash unsigned boot or recovery images.
It will only allow you to flash an unsigned system image.
I use Ubuntu to mount and edit Ext4 images.
You can use the windows or Linux version of simg2img to convert the sparse image to raw then mount in Linux
Tbh Samsung need to provide an unlock for this device like they do for the Chinese devices as there is no reason why this device should have a locked bootloader.

Remove warning splashscreen (after unlocking BL)

Hello!
Is there a way to remove, or change, the warning splashscreen, the one after unlocking BL?
Thanks!

This has been answered a hundred times already. No, it can't be done
Sent from my ASUS_Z00A using Tapatalk

Hey there, not really sure, but this must be the right place to ask for some help..
Being a professional bugger, I have managed to accomplish the impossible... I think I have flashes 1 more Asus logo to my device. Now I got 1 warning, 2asus logos, and the rom logo.
Can someone share a method so I can remove them?
Z00a
7.1.2
Root

I’m not sure whatsapp you have done, but I can say that it should be normal. The first ASUS logo, I think, is loaded by the Google alert of a modified / unsigned system partition, and the second is loaded by the ASUS bootloader.
My Zenfone do it as well, but is not a question of flashing more than one splash screen, I’m sure.

ketogeno said:
Hello!
Is there a way to remove, or change, the warning splashscreen, the one after unlocking BL?
Thanks!
Click to expand...
Click to collapse
..

U
EmilioDallaTorre said:
I’m not sure whatsapp you have done, but I can say that it should be normal. The first ASUS logo, I think, is loaded by the Google alert of a modified / unsigned system partition, and the second is loaded by the ASUS bootloader.
My Zenfone do it as well, but is not a question of flashing more than one splash screen, I’m sure.
Click to expand...
Click to collapse
Ahah thanks for the information, it must be as you say..
But, is there any way to remove them?
I think that it is possible to remove the warning, downgrading and upgrading all over again..
I have tried to remove the img files, but they come up again after reboot.
If there are commands to flash them, i think that there must be some sort of command to "unflash", or some file i could eddit, so the OS does not require to load them.

Mate se boot screen on honor 7x usa is this possible??

Can this be done ?? If so how

What kind of question is this? I do not think there is a way to get a boot screen from another device unless you have the phone rooted, and then somehow get the boot animation from a Mate SE, and then replace the default boot animation with the Mate SE one.

crayonicle said:
What kind of question is this? I do not think there is a way to get a boot screen from another device unless you have the phone rooted, and then somehow get the boot animation from a Mate SE, and then replace the default boot animation with the Mate SE one.
Click to expand...
Click to collapse
Its a logical question you act like niether version of the phone can be rooted i bet if it was done you will proably be the second one to do it

dcraffam said:
Its a logical question you act like niether version of the phone can be rooted i bet if it was done you will proably be the second one to do it
Click to expand...
Click to collapse
Sorry, what? I can't understand you. When I say what kind of question this is, I mean why would any "logical" person try to get another phone's boot screen onto their phone? What is the purpose of doing so? What do you have to gain out of it? Smh.

​
crayonicle said:
Sorry, what? I can't understand you. When I say what kind of question this is, I mean why would any "logical" person try to get another phone's boot screen onto their phone? What is the purpose of doing so? What do you have to gain out of it? Smh.
Click to expand...
Click to collapse
The same reason there is a boot animation app because people like to change things why you acting like a little girl instead of trying to help. Or maby The same reason you unlock the bootloader of a perfectly running phone why does that bother you?? do you understand the words now ???

dcraffam said:
The same reason there is a boot animation app because people like to change things why you acting like a little girl instead of trying to help. Or maby The same reason you unlock the bootloader of a perfectly running phone why does that bother you?? do you understand the words now ???
Click to expand...
Click to collapse
No, I still don't know why you can't spell correctly. Anyway, I already listed the steps to switch up the boot animation. You can easily Google this information but instead resort to asking here. Smh.

crayonicle said:
No, I still don't know why you can't spell correctly. Anyway, I already listed the steps to switch up the boot animation. You can easily Google this information but instead resort to asking here. Smh.
Click to expand...
Click to collapse
your lame asf at least link it

crayonicle said:
No, I still don't know why you can't spell correctly. Anyway, I already listed the steps to switch up the boot animation. You can easily Google this information but instead resort to asking here. Smh.
Click to expand...
Click to collapse
you could of been linked it i could of been changed my boot and we both could of been happy but you gotta be **** a lil one too

dcraffam said:
you could of been linked it i could of been changed my boot and we both could of been happy but you gotta be **** a lil one too
Click to expand...
Click to collapse
You know, being a d**k won't make yours any bigger
And if you want links, you can have some:
https://www.phonearena.com/news/How-to-install-a-custom-Android-boot-animation_id53609
https://www.hongkiat.com/blog/change-android-boot-animation/
https://www.youtube.com/watch?v=DQkyfQYqlms
https://www.techadvisor.co.uk/how-to/google-android/how-change-boot-animation-in-android-3644213/

I did not change it on mine, but just located to bootanimation.zip
it is in /version/special_cust/BND-L24/hw/usa/media/bootanimation.zip on the L24
each region/ model will have different path.
there is also a second animation located in
\version\region_comm\oversea\media
don't know when it is used . On mine, the one in the hw folder has "wwwhi.honor.us.com " on the bottom of all the images, and that matches the animation being used. The other one has larger images and no addresses on the images.

I'm also interested in this, since I already replaced my boot animation with one that has a dark background from here. The Mate SE logo screen is just the simple HUAWEI logo on a black background, which is less visually jarring (especially with the warning screen that's displayed after the bootloader is unlocked).
I understand that the boot logo on Huawei devices is stored in oeminfo.img, but I haven't figured out how to unpack/repack it for the hi6250 devices.

mrmazak said:
I did not change it on mine, but just located to bootanimation.zip
it is in /version/special_cust/BND-L24/hw/usa/media/bootanimation.zip on the L24
each region/ model will have different path.
there is also a second animation located in
\version\region_comm\oversea\media
don't know when it is used . On mine, the one in the hw folder has "wwwhi.honor.us.com " on the bottom of all the images, and that matches the animation being used. The other one has larger images and no addresses on the images.
Click to expand...
Click to collapse
Thanks i appreciate it