Develop Bugs

[Q] How to install stock ROM for N7100?

Hi all,
I have just bought a N7100. The build number is JR003C.N7100XXALJ3.
I have read the following thread about installation of stock ROM.
http://forum.xda-developers.com/showthread.php?t=1896696
I would like to install "N7100ZSDMA6 N7100OZSDMA6 - Download - Hong Kong" stock ROM in my device. However, after reading the thread, I still can't figure out the correct procedure of installing the ROM.
I have downloaded the ROM & Odin3_v3.04. Any other tools required?
Procedures:
1. Open Odin3, select PDA and select the ROM downloaded
2. Turn-off N7100 and enter into download mode (Do I need to turn on the "Developer Options" in the Setting manual?)
3. Connect my device to the computer
4. Click "Start" in Odin3
My N7100 is just bought and not rooted yet. Is my procedure correct???
Many thanks!

patshek said:
I have downloaded the ROM & Odin3_v3.04. Any other tools required?
Procedures:
1. Open Odin3, select PDA and select the ROM downloaded
2. Turn-off N7100 and enter into download mode (Do I need to turn on the "Developer Options" in the Setting manual?)
3. Connect my device to the computer
4. Click "Start" in Odin3
My N7100 is just bought and not rooted yet. Is my procedure correct???
Click to expand...
Click to collapse
1.yes, but you have to extract zip file which you have download, and you will find .tar md5 file. which you have to select for PDA
2.yes, there is no concern with 'development option'
3.yes
4.yes

And make sure only f.reset time and auto reboot is checked. They both must be checked and nothing else.
Sent from my GT-N7100

Thanks for the advice!
The ROM is successfully installed.

Hi Guys I'm Wondering is there any way to Wipe empty the Phone Storage Clean .... before I Install new ROM ? .... custom or stock

rk7987 said:
Hi Guys I'm Wondering is there any way to Wipe empty the Phone Storage Clean .... before I Install new ROM ? .... custom or stock
Click to expand...
Click to collapse
Do a mega wipe with zoot1's script
Sent from my GT-N7100

SM-T800 on Marshmallow 6.0.1 - How do you root or install TWRP on this?

I was previously on cm12.0 but wanted to get back to stock for 6.0.1. Got back to stock but now I can't stand the bloat. Has anyone rooted the stock 6.0.1 yet?

jawz101 said:
I was previously on cm12.0 but wanted to get back to stock for 6.0.1. Got back to stock but now I can't stand the bloat. Has anyone rooted the stock 6.0.1 yet?
Click to expand...
Click to collapse
Just flash TWRP with Odin then flash the supersu zip through TWRP.

Thanks. I got through it all. It's been a while since I've rooted this tablet. My Linux laptop and Virtualbox eventually played nice. Also, apparently any old cord doesn't work. I had to use the original Samsung USB cable for Download Mode to work.

Root SM-T800 6.0.1 with TWRP
paulshriner said:
Just flash TWRP with Odin then flash the supersu zip through TWRP.
Click to expand...
Click to collapse
Thanks for the heads-up..
As I've never used TWRP before (always rooted with Chainefire''s CF-Auto-Root still not available for SM-T800 6.0.1), could you please post a quick step-by-step on how to root the new Marshmallow 6.0.1 on a SM-T800.
Much appreciated..

terrord8158 said:
Thanks for the heads-up..
As I've never used TWRP before (always rooted with Chainefire''s CF-Auto-Root still not available for SM-T800 6.0.1), could you please post a quick step-by-step on how to root the new Marshmallow 6.0.1 on a SM-T800.
Much appreciated..
Click to expand...
Click to collapse
This link is not for our tablets but is the same process. Just make sure you find the correct TWRP version for the T800. Once you have TWRP installed find Supersu and copy it to your tablet's SD card. Use TWRP to install Supersu. http://www.cyanogenmods.org/forums/topic/install-twrp-recovery-samsung-android-using-odin/
Sent from my SM-T800 using XDA-Developers mobile app

I'm also on MM 6.0.1 having just bought this device. I'd like to install this rom:
https://forum.xda-developers.com/galaxy-tab-s/development/rom-android-6-marshmallow-tab-s-10-5-lte-t3219759
So how do I go about it please? Do I need to unlock the bootloader?
:edit: Followed the guide and got TWRP installed. Downloaded the Gapps (very slow download), SuperSu zip and Nougat rom from here. Did a wipe of dalvik, cache, data and system. Sorted. Only problem is I bought the tablet for reading comics and for some reason my comic reading apps can't "see" the cbr files on the micro SD.

So I have tried re downloading Odin and Twrp and flashing it. It passes Everytime. But when I boot to recovery with power home and vol up. It goes to Android recovery. Any tips solutions you could help me with? Thanks very much in advance

After flashing twrp in odin did you reboot to recovery ? Pretty sure u need to reboot to recovery to get it to "stick",
Otherwise I believe your tab will change it back to origanal recovery
DOWNLOAD:
1) Install the TWRP app from the Play Store or grab the apk from our website
2) Open the app, agree to the terms, and enable root access
3) Select TWRP Flash
4) Search for your device and select the version you wish to download
5) Once the download is complete, select the file (it's usually in your downloads folder) and then Flash Recovery
OR:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find more information and download links on our website.

I had the same problem and I solved it by chance by finding a post online. It seems that after you flash TWRP with Odin it is indeed properly installed but you can't access it because when you boot into recovery it boots into Samsung's recovery. To get to TWRP you need to do the following:
1. Power off your Galaxy Tab S 10.5. Wait 6-7 seconds after screen goes off.
2. Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
3. Press Volume Up to continue to download mode.
4. Reboot again pressing POWER + HOME +VOL DOWN but as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons and wait.
5. Voila TWRP!
I hope it worked for you as it did for me.

Yes
paulshriner said:
Just flash TWRP with Odin then flash the supersu zip through TWRP.
Click to expand...
Click to collapse
I did root the. samsung galaxy sm-t800. watch my vldeo.
https://youtu.be/Ih2IifEUq84

[Unofficial] [Updated 021217] TWRP 3.2.0-0 Mi Note 2 Themes & Aroma Guide

Unofficial TWRP 3.2.0-0 Mi Note 2 (scorpio)
Unofficial TWRP build for the Mi Note 2.
TWRP 3.1.1-0 Changelog https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
Compatible with TWRP Backup and Recuse Tool for PC
Download Link
twrp-3.2.0-0-scorpio.img
Update 14/07/17
Update TWRP to 3.2.0.0
Update 14/07/17
Update TWRP to 3.1.1-0
New streamlined kernel
Add F2FS support
Improved Android 7.0 Miui compatibility - If issues persist please let me know
Update 30/05/17
All features working as expected
Screenbrightness adjustment is now responding accurately with a suitable default brightness
Updated kernel.
Much quicker booting.
Installation Guide
Once you've got you're bootloader unlocked with MiFlash and run through all the Xiaomi hoops to unlock your bootloader and have a fastboot installed on your PC:
Simply place the download where you like and then open a command prompt and type
fastboot flash recovery /path/to/twrp-3.1.1-0-scorpio.img
BONUS THEMES & File Manager
Plus as a special treat I'm including a full guide below to use Materialised Theme and Aroma File Manager both working within TWRP 3.1.1-0
Themes available from here
1. Install the latest TWRP linked above.
2. Download one of the themes above (see screenshots below for recommendations)
3. Download Aroma File Manager for TWRP from here
4. Once booted into TWRP select Install and choose the theme.zip you've downloaded.
5. You will instantly see the theme applied
6. Click Install again and this time select "materialised_aromafm_200-b7.zip"
7. Once that zip has completed installing open the Materialised Options (the art palette icon on the top right)
8. Tick the box that says "Use Aroma File Manager"
9. Press back and select "File Manager" from the list.
10. Swipe to start Aroma File Manager
11. Enjoy!!
See attached thumbnails for themes in action.
Source:
https://github.com/stonetrapping/twrp_android_device_scorpio
Special thanks to:
z31s1g for the wonderful themes and the Aroma File Manager

Thanks, dude !

Working OK for both MIUI and AOSP based ROMs?

Working with ASAP and MIUI and encryption all round.

That's great! Thanks for sharing

After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?

stephendt0 said:
After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?
Click to expand...
Click to collapse
You can keep dm-verity. After flashing I'd suggest leaving fastboot and booting straight into recovery via fingerpress.
Flashing SuperSU or Magisk or similar should ensure survival of TWRP if it's being overwritten.

Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?

Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
1. I've noticed the slow speed too, I'm 100% sure why it's happening but I have some ideas.
2. The same ideas will hopefully address this issue.
It was a quick and dirty port since there was no native TWRP, I haven't had the time yet to improve it but I'll build an updated release based on 8.2.5.0 sometime soon and look to making it official.

Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.

Thanks, StoneTrapper !!
I will check later after flashing new version !
StoneTrapper said:
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.
Click to expand...
Click to collapse

Really fast at boot, maybe because is a release from the future (30052017 )
great job, thanks man!

Can not use usb otg function ...
Can not use usb otg function ...
Otg function, no work

[email protected] said:
Can not use usb otg function ...
Otg function, no work
Click to expand...
Click to collapse
I've had no issues with USB-OTB, with any standard formatted flash drive (FAT32, NTFS, EXT4).
This is also the first I've heard of anyone having such an issue.
Does the OTG drive mount successfully in whatever ROM you're using? Is it attached prior to booting to TWRP? Can you provide additional information.
TWRP doesn't like remounting the same USB multiple times - i.e if you unplug the USB while in TWRP, and then reattach the same drive it won't remount it.

Sorry to feedback lately because I was too busy in past 2-week.
Well, new TWRP is working well.
The only one problem: If I want to upgrade firmware, TWRP will be replaced by MIUI stock recovery after flashing new version of MIUI ROM.
It's pretty annoying because I need to get into fastboot mode then flash TWRP. After that, entering TWRP and flash lineage OS ...
Is it possible to be fixed in next coming version ?
Kris

May I know how to flash the TWRP rom?

I'm on MIUI.eu ROM, can I flash full global MIUI original ROM with TWRP without bricking the phone ??
Before on Redmi note 3 u can't flash original ROM without bricking the phone, u needed special TWRP (zxc version) or modify the ROM
Can you explain me ?
Envoyé de mon Mi Note 2 en utilisant Tapatalk

Link down.

chemha said:
Link down.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.

StoneTrapper said:
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.
Click to expand...
Click to collapse
It does not work. No download link found

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G930A Flat Odin Factory FIrmware Downloads
G930AUCU4CRI2_8.0_4File_USA (AT&T).7z
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar

Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good

jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.

Brilliant! Many thanks as I just got this device a few days ago so the timing on this guide is perfect! I had a little trouble after I flashed the BL_ENG_BOOTLOADERS where it constantly boot-looped but once I was able to get it back into download mode (holding volume down, home button, and power button) and start again from step 5 of the unrooting process everything worked according to plan then. I'm happy to announce I've rooted, customized, and unrooted thanks to the simple ease in which this method works so many thanks to jrkruse!

SCUZZY1337 said:
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.
Click to expand...
Click to collapse
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified

jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
The app is installing the driver for ages and never stops, why?

SCUZZY1337 said:
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
The app is installing the driver for ages and never stops, why?
Click to expand...
Click to collapse
Reboot your phone

jrkruse said:
Reboot your phone
Click to expand...
Click to collapse
Installed thru twrp, works perfectly.

Added ATT factory firmware to the OP

jrkruse said:
Added ATT factory firmware to the OP
Click to expand...
Click to collapse
What?

SCUZZY1337 said:
What?
Click to expand...
Click to collapse
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified

jrkruse said:
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified
Click to expand...
Click to collapse
Is it possible to install magisk?

SCUZZY1337 said:
Is it possible to install magisk?
Click to expand...
Click to collapse
No it is not
Sent using some kind of device I modified

jrkruse said:
No it is not
Sent using some kind of device I modified
Click to expand...
Click to collapse
Could you please tell me the difference between V4 and V8 bootloaders?

SCUZZY1337 said:
Could you please tell me the difference between V4 and V8 bootloaders?
Click to expand...
Click to collapse
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified

jrkruse said:
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified
Click to expand...
Click to collapse
Idk i hav V4 and i dont have any lags, everything runs super smooth.

Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.

pyveswebsud said:
Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.
Click to expand...
Click to collapse
English is required use on xda. Please translate to English
Sent using some kind of device I modified

how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?

miniminus said:
how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?
Click to expand...
Click to collapse
Unless you have an eng recovery for oreo for the active and an eng boot.img for oreo you won’t be able to do anything
Sent using some kind of device I modified

Samsung S9 UNABLE TO BOOT UP after flashing SuperSU

Dear all,
I (newbie who trying to root for the first time) have tried to root my Samsung S9 with SuperSu via Odin. My device is now stuck at the S9 loading screen which will not boot up anymore.
Source of learning:
https://www.youtube.com/watch?v=g3IppGISkP0
Here's what I have done:
Stage 0 - Download all needed files
1. Odin 3.13.1
2. no-verify-opt-encrypt-6.0-star
3. RMM-state-ByPass_Mesa.zip
4. Samsung-anti-removal.2.4.zip
5. SupserSu-v.2.82.201705271822.zip
Stage 1 (Setup environment)
1. Enable Developer mode - OEM unlock enabled & USB Debugging enabled
2. Turn off my device, enter download mode (volume down button + bixby button + power button)
3. Connect my S9 device to my laptop
4. Launch Odin 3.13.1 on my laptop (S9 device recognized!) - Select AP, choose TWRP 3.3.1.1, press on start. (Device turn off itself)
5. As soon as device begins to boot, I enter recovery mode (volume up button + bixby button + power button)
Stage 2 Managed to entered TWRP
1. Swipe to Allow Modification
2. Tap on Wipe > Format Data > type in YES
3. Back to Menu
4. Tap on Install, (no-verify-opt-encrypt-6.0-star) - success
5. Reboot - Recovery
6. Tap on Install - (RMM-state-ByPass_Mesa.zip) - success
6. Hit back button
7. Tap on (SupserSu-v.2.82.201705271822.zip) - success
8 . Hit back button
9. Tap on (Samsung-anti-removal.2.4.zip) - success
10. Reboot system
11. Device begins reboot (Device stuck at Samsung S9 Screen)
Any advice what should I do now? Am I making any mistakes?
Please help. Appreciate!

CounteReborn said:
Dear all,
I (newbie who trying to root for the first time) have tried to root my Samsung S9 with SuperSu via Odin. My device is now stuck at the S9 loading screen which will not boot up anymore.
Source of learning:
https://www.youtube.com/watch?v=g3IppGISkP0
Here's what I have done:
Stage 0 - Download all needed files
1. Odin 3.13.1
2. no-verify-opt-encrypt-6.0-star
3. RMM-state-ByPass_Mesa.zip
4. Samsung-anti-removal.2.4.zip
5. SupserSu-v.2.82.201705271822.zip
Stage 1 (Setup environment)
1. Enable Developer mode - OEM unlock enabled & USB Debugging enabled
2. Turn off my device, enter download mode (volume down button + bixby button + power button)
3. Connect my S9 device to my laptop
4. Launch Odin 3.13.1 on my laptop (S9 device recognized!) - Select AP, choose TWRP 3.3.1.1, press on start. (Device turn off itself)
5. As soon as device begins to boot, I enter recovery mode (volume up button + bixby button + power button)
Stage 2 Managed to entered TWRP
1. Swipe to Allow Modification
2. Tap on Wipe > Format Data > type in YES
3. Back to Menu
4. Tap on Install, (no-verify-opt-encrypt-6.0-star) - success
5. Reboot - Recovery
6. Tap on Install - (RMM-state-ByPass_Mesa.zip) - success
6. Hit back button
7. Tap on (SupserSu-v.2.82.201705271822.zip) - success
8 . Hit back button
9. Tap on (Samsung-anti-removal.2.4.zip) - success
10. Reboot system
11. Device begins reboot (Device stuck at Samsung S9 Screen)
Any advice what should I do now? Am I making any mistakes?
Please help. Appreciate!
Click to expand...
Click to collapse
I believe you need magisk.

Instead of using SuperSU try using Magisk, it's more simple has has more features compared to SuperSU.
Also I think the reason why you stuck at the bootscreen is that after you format your phone, that means your phone got no rom/ system. Maybe you can try installing the ROM from the custom one which you can find in the cross device section in Here (Exynos Only).
And each of them has the instruction on how to install Magisk to root your phone
Edit: The video you refered to I believe is for the android 9 version, if your phone is on android 10 then it's outdated for your phone

TheMadScientist said:
I believe you need magisk.
Click to expand...
Click to collapse
I actually tried with Magisk.. but it stays the same. Basically I replace stage 2, step 7 with Magisk instead of Supersu.
Flashing only Magisk does not mean I have any system in place correct?
B1nz said:
Instead of using SuperSU try using Magisk, it's more simple has has more features compared to SuperSU.
Also I think the reason why you stuck at the bootscreen is that after you format your phone, that means your phone got no rom/ system. Maybe you can try installing the ROM from the custom one which you can find in the cross device section in Here (Exynos Only).
And each of them has the instruction on how to install Magisk to root your phone
Edit: The video you refered to I believe is for the android 9 version, if your phone is on android 10 then it's outdated for your phone
Click to expand...
Click to collapse
My device was on Android 9 actually.. so I have the exact same version as the video shown. Today I have flashed back my device with Stock ROM on Android 10. Im not sure with the steps Im doing it is right, when should I actually flash a custom rom? Please correct me if im wrong, my stage 1 should be all correct. Stage 2, before step 10 rebooting system, I should actually flash Custom ROM? Because after formatting my device and installing Magisk on Stage 2 step 7, my device still got no rom right?

After flashing back my device with Stock ROM on Android 10, I tried to root my device again with the steps give in video (still failed, device stuck at Samsung Logo again).
Flashing back again with Stock ROM. Tried to enter download mode to start TWRP via Odin.
Then I was given a message "Only official release binaries are allowed to be flashed (RECOVERY)" in Download Mode
Now what? Does that mean I can't go flash anymore? :crying:

CounteReborn said:
My device was on Android 9 actually.. so I have the exact same version as the video shown. Today I have flashed back my device with Stock ROM on Android 10. Im not sure with the steps Im doing it is right, when should I actually flash a custom rom? Please correct me if im wrong, my stage 1 should be all correct. Stage 2, before step 10 rebooting system, I should actually flash Custom ROM? Because after formatting my device and installing Magisk on Stage 2 step 7, my device still got no rom right?
Click to expand...
Click to collapse
Yes, the steps that I did on my own by coming from stock ROM:
1. Flash TWRP from odin, disable the automatic reboot
2. If success, then manually reboot to TWRP
3. Then I formated my phone
4. Follow the custom ROM installation steps
5. Done!
note:
- Steps 1 & 2 is basically the same as what you've done.
- If you still want to running the stock ROM, you have to flash the modified one or you'll stuck on the boot screen.
My suggestion is using the Alexis ROM, which is more updated (already on oneUI 2.1), more light, has alot of features (which you can choose in the aroma installer), and built in Magisk. so you don't have to install magisk manually
---------- Post added at 12:55 PM ---------- Previous post was at 12:51 PM ----------
CounteReborn said:
After flashing back my device with Stock ROM on Android 10, I tried to root my device again with the steps give in video (still failed, device stuck at Samsung Logo again).
Flashing back again with Stock ROM. Tried to enter download mode to start TWRP via Odin.
Then I was given a message "Only official release binaries are allowed to be flashed (RECOVERY)" in Download Mode
Now what? Does that mean I can't go flash anymore? :crying:
Click to expand...
Click to collapse
is it written "Prenormal"?
there's this stage called prenormal where you failed to modified your phone for the firstime, basically you have to wait like 7 days until you can modify your phone again.
and if still failing, it will back to the prenormal stage.
so far that's what i know, correct me if i'm wrong
if not then you can try to flash TWRP to see if it works
Also the thing i realize is that to be able to flash TWRP in Odin you have to finished doing the first time setup on the ROM, idk why but that's what i'm facing back then

Are you on Android 10? If yes, i followed this video.
https://m.youtube.com/watch?feature=youtu.be&v=HSqam9CYNGU
---------- Post added at 09:19 AM ---------- Previous post was at 09:13 AM ----------
CounteReborn said:
After flashing back my device with Stock ROM on Android 10, I tried to root my device again with the steps give in video (still failed, device stuck at Samsung Logo again).
Flashing back again with Stock ROM. Tried to enter download mode to start TWRP via Odin.
Then I was given a message "Only official release binaries are allowed to be flashed (RECOVERY)" in Download Mode
Now what? Does that mean I can't go flash anymore? :crying:
Click to expand...
Click to collapse
Because you flashed the stock firmware, you might forgot to enable oem bootloader unlock?

B1nz said:
Yes, the steps that I did on my own by coming from stock ROM:
1. Flash TWRP from odin, disable the automatic reboot
2. If success, then manually reboot to TWRP
3. Then I formated my phone
4. Follow the custom ROM installation steps
5. Done!
note:
- Steps 1 & 2 is basically the same as what you've done.
- If you still want to running the stock ROM, you have to flash the modified one or you'll stuck on the boot screen.
My suggestion is using the Alexis ROM, which is more updated (already on oneUI 2.1), more light, has alot of features (which you can choose in the aroma installer), and built in Magisk. so you don't have to install magisk manually
---------- Post added at 12:55 PM ---------- Previous post was at 12:51 PM ----------
is it written "Prenormal"?
there's this stage called prenormal where you failed to modified your phone for the firstime, basically you have to wait like 7 days until you can modify your phone again.
and if still failing, it will back to the prenormal stage.
so far that's what i know, correct me if i'm wrong
if not then you can try to flash TWRP to see if it works
Also the thing i realize is that to be able to flash TWRP in Odin you have to finished doing the first time setup on the ROM, idk why but that's what i'm facing back then
Click to expand...
Click to collapse
Not sure what actually happened, but the message is now gone after restart.
Anyway, Do you know this website (https://desktop.firmware.mobi/) instead, can I just use the ROM here to flash my device?
Not sure if I could just do the same, downlaod the recovery and boot img, then flash via Odin?
mkl.xda said:
Are you on Android 10? If yes, i followed this video.
https://m.youtube.com/watch?feature=youtu.be&v=HSqam9CYNGU
---------- Post added at 09:19 AM ---------- Previous post was at 09:13 AM ----------
Because you flashed the stock firmware, you might forgot to enable oem bootloader unlock?
Click to expand...
Click to collapse
Not sure what I did again, but the message "Only official release binaries are allowed to be flashed (RECOVERY)" is now removed. I just recall I did a restart I think. I tried your video, it didn't work. I end up in the same screen which I now think this is expected case? Because once we completely wipe the phone, the device has no more ROM. So in the video, we only flash back Magisk and Disable Verify.
Do you know this website (https://desktop.firmware.mobi/) instead, can I just use the ROM here to flash my device?
Not sure if I could just do the same, downlaod the recovery and boot img, then flash via Odin?

CounteReborn said:
Not sure what actually happened, but the message is now gone after restart.
Anyway, Do you know this website (https://desktop.firmware.mobi/) instead, can I just use the ROM here to flash my device?
Not sure if I could just do the same, downlaod the recovery and boot img, then flash via Odin?
Click to expand...
Click to collapse
Never knew that before tho, but if you want to download the official one I would recomend you downlaod from the SamMobile, which I highly recommend and is already trusted by alot of users here, just choose the right model number and country and you're done!, or if you want a faster download then I recommend you to use either Frija or SamFirm which is the same, and both are tools to download firmware from SamMobile.
It will download a zip of firmware, you just have to extract it and flash it by using Odin, also for the CSC file choose the HOME_CSC don't choose the normal CSC,
if you able to get into the normal rom, then you can do the instruction that i give before
hope it works