[Q] How to install stock ROM for N7100? - Galaxy Note II Q&A, Help & Troubleshooting

Hi all,
I have just bought a N7100. The build number is JR003C.N7100XXALJ3.
I have read the following thread about installation of stock ROM.
http://forum.xda-developers.com/showthread.php?t=1896696
I would like to install "N7100ZSDMA6 N7100OZSDMA6 - Download - Hong Kong" stock ROM in my device. However, after reading the thread, I still can't figure out the correct procedure of installing the ROM.
I have downloaded the ROM & Odin3_v3.04. Any other tools required?
Procedures:
1. Open Odin3, select PDA and select the ROM downloaded
2. Turn-off N7100 and enter into download mode (Do I need to turn on the "Developer Options" in the Setting manual?)
3. Connect my device to the computer
4. Click "Start" in Odin3
My N7100 is just bought and not rooted yet. Is my procedure correct???
Many thanks!

patshek said:
I have downloaded the ROM & Odin3_v3.04. Any other tools required?
Procedures:
1. Open Odin3, select PDA and select the ROM downloaded
2. Turn-off N7100 and enter into download mode (Do I need to turn on the "Developer Options" in the Setting manual?)
3. Connect my device to the computer
4. Click "Start" in Odin3
My N7100 is just bought and not rooted yet. Is my procedure correct???
Click to expand...
Click to collapse
1.yes, but you have to extract zip file which you have download, and you will find .tar md5 file. which you have to select for PDA
2.yes, there is no concern with 'development option'
3.yes
4.yes

And make sure only f.reset time and auto reboot is checked. They both must be checked and nothing else.
Sent from my GT-N7100

Thanks for the advice!
The ROM is successfully installed.

Hi Guys I'm Wondering is there any way to Wipe empty the Phone Storage Clean .... before I Install new ROM ? .... custom or stock

rk7987 said:
Hi Guys I'm Wondering is there any way to Wipe empty the Phone Storage Clean .... before I Install new ROM ? .... custom or stock
Click to expand...
Click to collapse
Do a mega wipe with zoot1's script
Sent from my GT-N7100

Related

[Q] Can I just flash recovery with odin

I flash this http://forum.xda-developers.com/showthread.php?t=2577416 and it stuck on samsung logo. And i am using google authenticator so i have to save files. can I just flash recovery with any method from PC or something else?
thanks all.
I also am trying to flash a new recovery on my samsung galaxy gio with ODIN after it is bricked flashing tass- 6.0.4.5.zip(wrong recovery ,seems for galaxy mini, is it possible to flash the 6.0.4.5.zip and if so how to prepair the zip file for odin or heimdall
thanks in advance
SOLVED flash 5.0.2.7 with odin(when proces stops halfway trying connecting com you havent installed right USBdrivers(see jkoetsier cwm forum or cm11 forum somewere)
Same here
I was trying to flash 4.4 and I needed to flash a new recovery and now I can't access the recovery, is there anyway to flash the recovery using odin?? :crying:
or anyway backup apps now? i can flash something with odin and restore backup
none knows??
do anybody knows?? none??? :crying::crying::crying::crying:
it should be possible to flash a recovery with odin there is one in the right format see forum
Yes it worked on windows 7(seems not in windows8.1) in virtualbox but you need the right usb drivers installed.(ask jkoetsier)
Yes it is possible, open Odin: (https://db.tt/sBJggJ9w) click on one package and select this recovery: https://db.tt/3s64xA7R
jkoetsier said:
Yes it is possible, open Odin: (https://db.tt/sBJggJ9w) click on one package and select this recovery: https://db.tt/3s64xA7R
Click to expand...
Click to collapse
I put the device to download mode but device can't recognize by PC. it's windows 8. asus f83se.
edit: i installed kies and reboot but nothing change. still it says "usb device not recognised".
edit2: i tried at new computer. clicked on one package and select file than->start but it says "an unnamed file was not found"
ncdlek said:
I put the device to download mode but device can't recognize by PC. it's windows 8. asus f83se.
edit: i installed kies and reboot but nothing change. still it says "usb device not recognised".
edit2: i tried at new computer. clicked on one package and select file than->start but it says "an unnamed file was not found"
Click to expand...
Click to collapse
Did you put the correct OPS file for Gio
and did you extract the stock rom package?
HerroYou said:
Did you put the correct OPS file for Gio
and did you extract the stock rom package?
Click to expand...
Click to collapse
No! Because I just want to flash recovery so I only select that file as a one package.
edit: Oh I need that file now i realize that. thank you. it's done.
ncdlek said:
No! Because I just want to flash recovery so I only select that file as a one package.
edit: Oh I need that file now i realize that. thank you. it's done.
Click to expand...
Click to collapse
Where did you find the gio.ops?
I try but don't find any where..
Gio.ops: https://www.dropbox.com/s/un4epx6on2myd6f/GIO_v1.0.ops
Sent from my GT-S5660 using xda premium

Question about CWM

Hey guys, wondering if somebody could help me. I rooted my galaxy tab 3 8.0 t310 and installed CWM using a guide (that i can't show you because i'm not allowed to post links).
And when I booted in recovery, it was in a funny resolution and looked different. When I pressed to volume buttons to navigate the menu, each time I were to press the button the menu would disappear entirely and then re appear when I pressed it again and moved onto the next selection on the menu.
My question is, is this fine, or should I use TWRP instead? And how would I go about changing? (I'm used to rooting and flashing roms but I've never flashed a new recovery on its own) - there is a download for TWRP on the page.
that_guy20 said:
Hey guys, wondering if somebody could help me. I rooted my galaxy tab 3 8.0 t310 and installed CWM using a guide (that i can't show you because i'm not allowed to post links).
And when I booted in recovery, it was in a funny resolution and looked different. When I pressed to volume buttons to navigate the menu, each time I were to press the button the menu would disappear entirely and then re appear when I pressed it again and moved onto the next selection on the menu.
My question is, is this fine, or should I use TWRP instead? And how would I go about changing? (I'm used to rooting and flashing roms but I've never flashed a new recovery on its own) - there is a download for TWRP on the page.
Click to expand...
Click to collapse
Go to THIS post.
Scroll to the bottom of the post to where the links for philz_touch_6.00.8 are located. If you want to flash the KitKat builds, then choose philz_touch_6.00.8-t310-blackhawk-next-selinux.zip, if you don't want KitKat, then choose philz_touch_6.00.8-t310-blackhawk-next.zip.
You can flash these zips in your current CWM and then reboot recovery. You will like Philz Touch recovery better than CWM. It is actually based on CWM 6.0.4.5, but has touch interface and more features.
gr8nole said:
Go to THIS post.
Scroll to the bottom of the post to where the links for philz_touch_6.00.8 are located. If you want to flash the KitKat builds, then choose philz_touch_6.00.8-t310-blackhawk-next-selinux.zip, if you don't want KitKat, then choose philz_touch_6.00.8-t310-blackhawk-next.zip.
You can flash these zips in your current CWM and then reboot recovery. You will like Philz Touch recovery better than CWM. It is actually based on CWM 6.0.4.5, but has touch interface and more features.
Click to expand...
Click to collapse
Hi, don't have recovery (everything stock) on my tablet and want to install CM 11. My problem is that don't want to use hamidall software because on windows 8.1 don't work as readme file (i want to do with minimum risk). So my question is: Can I install some other version of recovery via odin and then re-flash with it philz_touch_6.00.8-t310-blackhawk-next.zip recovery. If I can, can you recommend which recovery to use to do that.
igy_tab said:
Hi, don't have recovery (everything stock) on my tablet and want to install CM 11. My problem is that don't want to use hamidall software because on windows 8.1 don't work as readme file (i want to do with minimum risk). So my question is: Can I install some other version of recovery via odin and then re-flash with it philz_touch_6.00.8-t310-blackhawk-next.zip recovery. If I can, can you recommend which recovery to use to do that.
Click to expand...
Click to collapse
Download the utility in THIS thread. It will turn any recovery.img into an Odin flashable tar.md5 file.
Download the correct Philz recovery for your tablet.
Extract the recovery.img from the zip.
Use the utility linked above to make the recovery.img into recovery.tar.md5.
Flash it with Odin. Select it in the PDA slot.
Make sure you uncheck auto-reboot in Odin, hit START; then boot directly to recovery when Odin shows the "RES OK" message.
gr8nole said:
Download the utility in THIS thread. It will turn any recovery.img into an Odin flashable tar.md5 file.
Download the correct Philz recovery for your tablet.
Extract the recovery.img from the zip.
Use the utility linked above to make the recovery.img into recovery.tar.md5.
Flash it with Odin. Select it in the PDA slot.
Make sure you uncheck auto-reboot in Odin, hit START; then boot directly to recovery when Odin shows the "RES OK" message.
Click to expand...
Click to collapse
Thank you! Do I need to use next kernel if i don't want dual boot for CM11?
EDIT: unfortunately this tool do not work. I unzip both, put recovery.img in tool folder but don't do anything when I run Runme.
But thank you if there is another way please post me. Thank you for help and development.
igy_tab said:
Thank you! Do I need to use next kernel if i don't want dual boot for CM11?
EDIT: unfortunately this tool do not work. I unzip both, put recovery.img in tool folder but don't do anything when I run Runme.
But thank you if there is another way please post me. Thank you for help and development.
Click to expand...
Click to collapse
Here is the T310 selinux version that will allow you to flash CM11. Unzip it and you will have the recovery.tar.md5. Let me know if you need the T311 or T315.
gr8nole said:
Here is the T310 selinux version that will allow you to flash CM11. Unzip it and you will have the recovery.tar.md5. Let me know if you need the T311 or T315.
Click to expand...
Click to collapse
I have T310. Thank you very much again, then I will do everything tomorrow, I am tired for now.
I have Tab 2 and installed cody's CM11 without any question but for Tab 3 I am such noob.

[Q] note 8.0 cm11 problem installing. Bricked?

Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
amersnap said:
Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
Click to expand...
Click to collapse
I assume you did not install a custom recovery???
If you did you need to download the right firmware package and load from the recovery.
You may try Odin 3.7 if you can manage to get into stock firmware upload.
Its not bricked - your recovery is probably a cwm - flash twerp if you want to install cm11 - or stock recovery..anyway cm11 is great but no phone...so not great for us 5100
gooberdude said:
I assume you did not install a custom recovery???
If you did you need to download the right firmware package and load from the recovery.
You may try Odin 3.7 if you can manage to get into stock firmware upload.
Click to expand...
Click to collapse
How do I install custom recovery? What do you mean? Download stock firmware? How do I install odin. Now when I connect to pc.. it cannot be detected anymore
kzintz said:
Its not bricked - your recovery is probably a cwm - flash twerp if you want to install cm11 - or stock recovery..anyway cm11 is great but no phone...so not great for us 5100
Click to expand...
Click to collapse
Thw note cannot be detected anymore in pc. How do I flash or root again :3
Download and install Odin 1.85 next search the stock firmware for your model here http://www.sammobile.com/firmwares/
Get your Note into download mode ( Press and keep holding the Volume Down, Home and Power ) and connect it to your PC, Odin should "see" it the first slot under ID:slot should turn a different color if so you are in good shape, now put the Firmware you download from above mentioned site click PDA*button and select the downloaded .tar.md5 file, Important: In Odin, make sure Auto Reboot and F. Reset Time options are enabled. Also, ensure that the Re-partition checkbox is not enabled and hit start and let Odin do the rest and you should be up and running in no time and now you can start over from scratch
Sent from my SPH-L900 using xda premium
amersnap said:
Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
Click to expand...
Click to collapse
Did you fix the problem?

[G928I]MM Bootloader from G928G

I tested it, G928G MM Bootloader works on G928I.
I tested it with this [ROM][SM-G928 F/I/C/L/K/S][6]Ditto S7 ROM [v6] from Electron Team[PC8] Thanks to GigilinE
Take a look at Attachment!
TAR File(sboot.bin, cm.bin) flash via Odin. (For install a ROM you need Recovery and Kernel for MM)
Hey mate,
Wanting to use AUDAX Rom using this... did you need to flash the 928G modem files as well or just the bootloader?
Thanks
itstongy said:
Hey mate,
Wanting to use AUDAX Rom using this... did you need to flash the 928G modem files as well or just the bootloader?
Thanks
Click to expand...
Click to collapse
Hey, i flashed the modem, hidden, bootloader and cm from this rom G928GUBU2BPD2_G928GUUB2BPD2_G928GUBU2BPD2.
It works great.
So have you uploaded just the bootloader here? Do you have the modem files?
Im in New Zealand with a G928I DVU2AOK2, Would this work?
If it would work how does one install it? ( I know how to use odin just need the ROM link and what to do with your bootloader files)
Thanks
finesir said:
Im in New Zealand with a G928I DVU2AOK2, Would this work?
If it would work how does one install it? ( I know how to use odin just need the ROM link and what to do with your bootloader files)
Thanks
Click to expand...
Click to collapse
I flashed mine to Marshmallow earlier today using Audax Rom,
This is the process I followed:
1- Put Rom in your device
2- Enable Developers options in your phone
Go to Settings / About Device / Software Info and tap on Build Number 10 times to enable Developers Options.
Then Go to Settings / Developers Options and Make enable "USB Debugging" and "OEM Unlock".
3- Make a backup of you internal SDcard and your data.
4- Power off your device
5- Reboot into Download Mode
(Press and Hold Volume Down + Home + Power button)
6- Open Odin 3.10.7
7- Put BOOTLOADER in BL
8- Put TWRP RECOVERY in AP (I had to specifically use this TWRP as the current one wasn't working for me https://www.androidfilehost.com/?w=files&flid=52574)
9- Connect device to PC and it added in Odin
10- Go in options tab and uncheck autoreboot (check only F. Reset Time).
11- Click on Start to Flash the files
12- Once it's completed and you see "PASS" in a green box, disconnect device and long press Volume Down + Power
13- Once screen turns off, immediately press Volume Up + Power + Home to reboot to recovery manually.
14- Once in Recovery, install Audax Rom and in Aroma installer select WIPE DATA.
15- When device reboot seems like a Bootloop but is normal. Than start Samsung bootanimation. Complete reboot ends after 7/8 minutes.
i´ve flashed this firmware complete G928GUBU2BPD2_G928GUUB2BPD2_G928GUBU2BPD2 and it works for me on my G928I! Only problem is LTE with O2 for me.
i think the best is install firmware. And then install recovery and kernel for other roms.

[HELP] SM-T111 no longer working after rooting and ROM installation

Hello All,
I downloaded the files below and installed on my SM-T111 Tab:
1) T110.TWRP.2.7.0.1.tar.md5 flashed via Odin
2) UPDATE-SuperSU-v2.01.zip Installed via Custom Recovery in #1
3) JASBR.v1.0.zip Installed via Custom Recovery #1
Now, I have only access to both download and recovery modes .. I can no longer launch the OS, and use the tab normally. Need help to re-gain access to my tab once more ..
sikas said:
Hello All,
I downloaded the files below and installed on my SM-T111 Tab:
1) T110.TWRP.2.7.0.1.tar.md5 flashed via Odin
2) UPDATE-SuperSU-v2.01.zip Installed via Custom Recovery in #1
3) JASBR.v1.0.zip Installed via Custom Recovery #1
Now, I have only access to both download and recovery modes .. I can no longer launch the OS, and use the tab normally. Need help to re-gain access to my tab once more ..
Click to expand...
Click to collapse
I may be wrong, but Jasbr is for the T-210...unless Gr8nole made a ROM for the T-111 and named it the same. You just need to find a ROM for your device and install it through TWRP. Or download stock firmware from sammobile.com and flash back to stock, reflash TWRP, and then try a different ROM.
RealWelder said:
I may be wrong, but Jasbr is for the T-210...unless Gr8nole made a ROM for the T-111 and named it the same. You just need to find a ROM for your device and install it through TWRP. Or download stock firmware from sammobile.com and flash back to stock, reflash TWRP, and then try a different ROM.
Click to expand...
Click to collapse
I realized that I downloaded the wrong ROM! Silly me .. I'm now downloading Dr.Ketan's ROM .. Hopefully I gain access to my device once more ..
sikas said:
I realized that I downloaded the wrong ROM! Silly me .. I'm now downloading Dr.Ketan's ROM .. Hopefully I gain access to my device once more ..
Click to expand...
Click to collapse
Did you get it working again?
RealWelder said:
Did you get it working again?
Click to expand...
Click to collapse
Weird thing .. Installed Dr.Ketan's ROM, yet, it booted as if I didn't do anything!! All my files are there, the stock OS is still there .. No root detected on the device .. So the only thing changed is the Custom Recovery
proper installation ??
Hooe u r wiping cache, dalvik, system bfore flashing.
In short ru following proper guide

Categories

Resources