KIW-L24 B151 Stock Roms
Here's All my Stock roms from the new update B151
Choose the one you like. I can't test these on L21/L22 so flash at your own risk
UPDATE: Do Not flash the Deodexed Roms on L21 / Or L22 unless you remove the cust.tar.gz from the Rom first. They include the USA Local.prop and your phone may not boot
KIW-L24-B151-Stock (Boot.img - System - System/Priv-App Only)
KIW-L24-B151-Stock.Rooted.DeOdexed (Boot.img - System - System/Priv-App - /cust - /data)
KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed (Boot.img - /Data - System - System/Priv-App - /cust) With xposed / Busybox / Quick Boot / SDfix / ES File Explorer
B151.noCust.no.swap.deodexed.Xposed.NOVA.R5.zip (Boot.img - System - System/Priv-App ) (No /data and No /cust) With xposed / Busybox / Quick Boot / SDfix / ES File Explorer / Nova - May require a factory reset and a couple of boots to get it going, if it hangs on the 2nd Honor screen simply reboot and it should load.
Clean flash is recommended - Dirty Flash may be OK
KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed will take about 10 - 15 minutes for first boot
Note: I have noticed The phone is charging faster after the update with my Quick Charge 2.0 18W Wall Charger.
Also, Messages can be answered from the popup notification
clsA said:
KIW-L24 B151 Stock Roms
Here's All the Stock roms from the new update B151
Choose the one you like. I can't test these on L21/L22 so flash at your own risk
KIW-L24-B151-Stock (Boot.img - System - System/Priv-App Only)
KIW-L24-B151-Stock.Rooted.DeOdexed (Boot.img - System - System/Priv-App - /cust - /data)
KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed (Boot.img - /Data - System - System/Priv-App - /cust) With xposed / Busybox / Quick Boot / SDfix / ES File Explorer
Clean flash is recommended - Dirty Flash may be OK
KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed will take about 10 - 15 minutes for first boot
Note: I have noticed The phone is charging faster after the update with my Quick Charge 2.0 18W Wall Charger.
Also, Messages can be answered from the popup notification
Click to expand...
Click to collapse
Downloading now...will report back later. Ty
---------- Post added at 11:56 AM ---------- Previous post was at 11:32 AM ----------
Cleaned install the DeOdexed without Xposed, the phone won't boot - stuck at hornor for the brave screen.
Twrp error: mounting system: failed to mount/dev/block/boot devive/by-name/system at/systemevice or resource busy
Please help
Caltinpla said:
Downloading now...will report back later. Ty
---------- Post added at 11:56 AM ---------- Previous post was at 11:32 AM ----------
Cleaned install the DeOdexed without Xposed, the phone won't boot - stuck at hornor for the brave screen.
Twrp error: mounting system: failed to mount/dev/block/boot devive/by-name/system at/systemevice or resource busy
Please help
Click to expand...
Click to collapse
reboot recovery and flash it again ... I tested all 3 files myself last night and this morning their all fine
Remember the DeOdexed roms boot slow the first time
clsA said:
reboot recovery and flash it again ... I tested all 3 files myself last night and this morning their all fine
Remember the DeOdexed roms boot slow the first time
Click to expand...
Click to collapse
It might be a bad download over the phone...I'll try it at home later. Ty
---------- Post added at 01:14 PM ---------- Previous post was at 01:10 PM ----------
Caltinpla said:
It might be a bad download over the phone...I'll try it at home later. Ty
Click to expand...
Click to collapse
I reflashed the stock B151 you posted yesterday and the phone booted fine
Will it be possible to have this version made it work for the l21?
ldmauro said:
Will it be possible to have this version made it work for the l21?
Click to expand...
Click to collapse
Download first one if you want stock
And other versions, you have to extract the ROM and remove cust then flash it
@clsA
Nice work again, i think adding cust in separate zip for l24 users only is better ?
And can you please check changing current with Ampere ?
Thanks
clsA said:
reboot recovery and flash it again ... I tested all 3 files myself last night and this morning their all fine
Remember the DeOdexed roms boot slow the first time
Click to expand...
Click to collapse
I finally got it booted after the second flash and it took a while to finish booting. The new B151 update seems run much smoother imo, will report later.
Thank you
AL_IRAQI said:
Download first one if you want stock
And other versions, you have to extract the ROM and remove cust then flash it
@clsA
Nice work again, i think adding cust in separate zip for l24 users only is better ?
And can you please check changing current with Ampere ?
Thanks
Click to expand...
Click to collapse
At 78% it was charging at 1020mA
Not sure what that means its the first time I used Ampere
Sent from my KIW-L24 using Tapatalk
Caltinpla said:
I finally got it booted after the second flash and it took a while to finish booting. The new B151 update seems run much smoother imo, will report later.
Thank you
Click to expand...
Click to collapse
I noticed the exact same thing.
To the dev, thank you for all your hard work! These ROMs have been excellent.
although it might not work, tried it on L-22, got the same error reported earlier in the thread even after 3 tries
I am installing this - (KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed)
Twrp error: mounting system: failed to mount/dev/block/boot devive/by-name/system at/system: Device or resource busy
- OK, I missed the reboot recovery part, I did that and the install went just fine....will report back on boot up and whether it works at all for L-22
Boooo hooo!! the phone goes into a boot loop and on the second reboot after honor logo, gets automatically into TWRP. But TWRP is stuck, no touch response and no actions can be done. I can't restore my back up either now ouch!
So folks, don't try this yet on non-L24 devices! I hope someone can help me get out of this mess of a phone now, lol, experimented and well punished!
nandakalyan said:
although it might not work, tried it on L-22, got the same error reported earlier in the thread even after 3 tries
I am installing this - (KIW-L24-B151-Stock.Rooted.DeOdexed.Xposed)
Twrp error: mounting system: failed to mount/dev/block/boot devive/by-name/system at/system: Device or resource busy
- OK, I missed the reboot recovery part, I did that and the install went just fine....will report back on boot up and whether it works at all for L-22
Boooo hooo!! the phone goes into a boot loop and on the second reboot after honor logo, gets automatically into TWRP. But TWRP is stuck, no touch response and no actions can be done. I can't restore my back up either now ouch!
So folks, don't try this yet on non-L24 devices! I hope someone can help me get out of this mess of a phone now, lol, experimented and well punished!
Click to expand...
Click to collapse
Sorry .. you'll have to reflash the stock L22 Update.App, My roms for the L24 include the /cust partition that you have to remove to use them on L21 / L22
As I don't have those phones I can't dump the /cust partition to help you
Flashing this should return you phone to working order >> http://forum.xda-developers.com/honor-5x/development/rom-r1-modaco-custom-rom-t3336458
clsA said:
Sorry .. you'll have to reflash the stock L22 Update.App, My roms for the L24 include the /cust partition that you have to remove to use them on L21 / L22
As I don't have those phones I can't dump the /cust partition to help you
Flashing this should return you phone to working order >> http://forum.xda-developers.com/honor-5x/development/rom-r1-modaco-custom-rom-t3336458
Click to expand...
Click to collapse
Thanks for the tip, been trying to flash the update.app, I downloaded that from the honor India site itself....but since TWRP is not letting me do anything (can't even swipe to unlock), I am only since trying fastboot commands.
I have the cust.img file for my device, but trying to flash it in fastboot is not working...it says "Remote: Command not allowed".....am sooo screwed! I even tried flashing back stock recovery and HiSuite seems to not support this device!!
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
nandakalyan said:
Thanks for the tip, been trying to flash the update.app, I downloaded that from the honor India site itself....but since TWRP is not letting me do anything (can't even swipe to unlock), I am only since trying fastboot commands.
I have the cust.img file for my device, but trying to flash it in fastboot is not working...it says "Remote: Command not allowed".....am sooo screwed! I even tried flashing back stock recovery and HiSuite seems to not support this device!!
Click to expand...
Click to collapse
How did you get TWRP messed up ?
If you restored stock recovery the phone will flash the update.app it's self
The update.app must be in a folder on the sdcard called dload
then boot the phone with power plus volume Up and down when the screen goes black release the power key but hold volume up / down till the flash starts
and the phone should start the flash on it's own.
I can reproduce it on my phone with the above instructions
When you get the phone back up and running it would be a good idea to make a backup of your /cust partition for the future instruction on how to dump it and create your own rescue rom are here >> http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
I'm getting an odd play store error after I install 1 app I get the error (error retrieving information from server) and the only way to fix it is to reboot
Sent from my KIW-L24 using XDA-Developers mobile app
clsA said:
How did you get TWRP messed up ?
If you restored stock recovery the phone will flash the update.app it's self
The update.app must be in a folder on the sdcard called dload
then boot the phone with power plus volume Up and down when the screen goes black release the power key but hold volume up / down till the flash starts
and the phone should start the flash on it's own.
I can reproduce it on my phone with the above instructions
When you get the phone back up and running it would be a good idea to make a backup of your /cust partition for the future instruction on how to dump it and create your own rescue rom are here >> http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
I have no idea what hap to TWRP....I am not at all techie, so only generally using common sense and following instructions but awesome advice on the cust partition back up and the rom, thanks a zillion for that!:good:
voldomart13 said:
I'm getting an odd play store error after I install 1 app I get the error (error retrieving information from server) and the only way to fix it is to reboot
Sent from my KIW-L24 using XDA-Developers mobile app
Click to expand...
Click to collapse
I got the same error with play store...matter worse, I can't play any of google app such music, movie, drive,...
Anyone else???
voldomart13 said:
I'm getting an odd play store error after I install 1 app I get the error (error retrieving information from server) and the only way to fix it is to reboot
Sent from my KIW-L24 using XDA-Developers mobile app
Click to expand...
Click to collapse
Can you tell me which rom you used
Caltinpla said:
I got the same error with play store...matter worse, I can't play any of google app such music, movie, drive,...
Anyone else???
Click to expand...
Click to collapse
Which Rom ?
I'm was getting a playstore sync error and it was not syncing my contacts. I removed the account and rebooted and reinstalled the same account and it worked
clsA said:
Can you tell me which rom you used
Which Rom ?
I'm was getting a playstore sync error and it was not syncing my contacts. I removed the account and rebooted and reinstalled the same account and it worked
Click to expand...
Click to collapse
The B151-DeOdexed without Xposed...I reflashed back to stock B151 and everything works fine
Caltinpla said:
The B151-DeOdexed without Xposed...I reflashed back to stock B151 and everything works fine
Click to expand...
Click to collapse
well that helps narrow it down .. your on L24 correct ?
it may be something in the /cust messing it up. I'll try some things
clsA said:
well that helps narrow it down .. your on L24 correct ?
it may be something in the /cust messing it up. I'll try some things
Click to expand...
Click to collapse
Yes, I'm on L24 and thank you for your hard work...really appreciated!!!
Can you tell me how to split the notification and ring volume so I can adjust them individually? Ty
Related
Hi,
I made a CM14 update yesterday, but since then, my phone boots in recovery mode. I tried to reinstall TWRP, in current and previous versions, and other roms (I can flash), but nothing works; each time I reboot, TWRP appears...
Any hint ?
Thanks very Much !
gdoucou said:
Hi,
I made a CM14 update yesterday, but since then, my phone boots in recovery mode. I tried to reinstall TWRP, in current and previous versions, and other roms (I can flash), but nothing works; each time I reboot, TWRP appears...
Any hint ?
Thanks very Much !
Click to expand...
Click to collapse
Try to install my latest BETA (check my signature)
steadfasterX said:
Try to install my latest BETA (check my signature)[/QUOT
Hi, thanks for your answer. I tried, but it still reboots on TWRP... (tried to install AICP).
There's an error message when installing :
patching system image unconditionnally
E:unknown command [log]
But it keeps going on with "dectected filesystem ext4 for /dev/boot [...]
Then it reboots in recovery...
Click to expand...
Click to collapse
gdoucou said:
steadfasterX said:
Try to install my latest BETA (check my signature)[/QUOT
Hi, thanks for your answer. I tried, but it still reboots on TWRP... (tried to install AICP).
There's an error message when installing :
patching system image unconditionnally
E:unknown command [log]
But it keeps going on with "dectected filesystem ext4 for /dev/boot [...]
Then it reboots in recovery...
Click to expand...
Click to collapse
Please try build 186
Click to expand...
Click to collapse
dont work for me same Probleme
TooThPicK said:
dont work for me same Probleme
Click to expand...
Click to collapse
Try my latest beta and if that is not working build 186
And which nightly causes that problem?
i think its not the recovery i test the cyanogen and this dont work
test installing stock but dont work
testet both not working
no Rom is working evrytime its boot to recovery
TooThPicK said:
i think its not the recovery i test the cyanogen and this dont work
test installing stock but dont work
testet both not working
no Rom is working evrytime its boot to recovery
Click to expand...
Click to collapse
Which cm version? tell exact build date.
Try to reflash stock kdz
Is there a way to Flash kdz from fastboot or recovery lgup dont find my device
ok i find the download mode now lgup find my device i downloading 20g and test
The issue is due to change in Google code not being compatible with TWRP.
I had the same issue, I flashed stock ROM with LGUP and then flashed CM14.1 after that.
Once your back up and running you can't use the in built updater, you have to download the update, manuay reboot to recovery and then flash.
Lgup dont find my device i only have recovery and fastbood
ceanth said:
The issue is due to change in Google code not being compatible with TWRP.
I had the same issue, I flashed stock ROM with LGUP and then flashed CM14.1 after that.
Once your back up and running you can't use the in built updater, you have to download the update, manuay reboot to recovery and then flash.
Click to expand...
Click to collapse
The change in Google code was the reason for one of the beta series I made. I was able to fix that in twrp even when this is no twrp issue. The internal updater worked fine afterwards when using any build after 15 of dec while using my latest beta.
That's why I ask several times what cm build they used (both do not answered this yet).
This is important so I can reproduce the issue and may can release a new twrp workaround if possible.
.
TooThPicK said:
Lgup dont find my device i only have recovery and fastbood
Click to expand...
Click to collapse
Not sure dude, best to post in the dedicated TWRP or cm14.1 thread.
its fixt thank you for your help the trick is turn off the g4 hold the + button and plugin the cabel now the device comes to downloadmode and now lgup is working
---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------
steadfasterX said:
That's why I ask several times what cm build they used (both do not answered this yet).
This is important so I can reproduce the issue and may can release a new twrp workaround if possible.
.
Click to expand...
Click to collapse
on my is the nigtly from 23.12
I got the same problem booting permanently in TWRP.
Flashing the build (02.12.) I had before also doesn't work.
Some kind of tips here?
xXfreshXx said:
I got the same problem booting permanently in TWRP.
Flashing the build (02.12.) I had before also doesn't work.
Some kind of tips here?
Click to expand...
Click to collapse
Install my latest beta. I know that this do not solve the problem but then after flashing it try to boot into system. This will fail. Then pull the recovery log and provide it on http://paste.omnirom.org
If you don't know how to get that log it is easy. Check my FAQ #4 A.
http://forum.xda-developers.com/showpost.php?p=68249027&postcount=3
.
steadfasterX said:
Install my latest beta. I know that this do not solve the problem but then after flashing it try to boot into system. This will fail. Then pull the recovery log and provide it on http://paste.omnirom.org
.
Click to expand...
Click to collapse
Thanks for your reply
https://paste.omnirom.org/view/6e5948df
xXfreshXx said:
Thanks for your reply
https://paste.omnirom.org/view/6e5948df
Click to expand...
Click to collapse
Hm . This is really after a boot into system??...
Ok as I cannot see relevant data pls do the same again but with build 186 now. Provide the log again. The reason is that this build handles the bootloader commands in an other way and I may see then what I wanna see.
Thx
.
Hm . This is really after a boot into system??...
Ok as I cannot see relevant data pls do the same again but with build 186 now. Provide the log again. The reason is that this build handles the bootloader commands in an other way and I may see then what I wanna see.
Thx
.
Click to expand...
Click to collapse
Here you are.
https://paste.omnirom.org/view/594df4ce
xXfreshXx said:
Here you are.
https://paste.omnirom.org/view/594df4ce
Click to expand...
Click to collapse
Hm the reason for that reboot lays somewhere else...
Please tell me exactly what you had done to produce that loop:
Which exact version of cm installed before upgrading?
Upgraded with internal cm updater or by flashing new zip in twrp?
The above would help me to reproduce the issue.
Besides the short questions above it would be great if you could test 2 things for me and if not skip to 3 (if you're in hurry):
1. The hw key combo test
2. The force twrp test
3. Last resort LG up
1. The hw key combo test
Flash the latest beta twrp and reboot into this twrp
Create a full backup if not already done so!!!
Power off the device and pull out the battery
Use the hardware key combo to get into factory reset screen (press vol down + power and keep them pressed. plugin battery. Wait until you see the LG logo and then release only the power button for 1 sec then press it again and keep both pressed until you see the factory reset screen)
Follow through this process and twrp will showing up without resetting anything
Grab the recovery log and paste it again
Then try to reboot to system
2. The force twrp test
If the first method hasn't worked it would be great to see the log anyways but then try the the following:
Boot into twrp (doesn't matter how for this test)
Flash again the latest twrp beta with twrp itself (choose img button at the bottom) and now when getting asked flash it to BOOT partition! Yes this is no problem or causes any damages. Just do it.
Then choose reboot into system and twrp will popup again (but now it starts from boot partition)
Now install the cm version of your choice or any other rom
Do NOT reboot yet
before rebooting grab the recovery log again and paste it again
3. LG up
If the above does not work and as I believe you need your device back soon the best bet would be do a full backup with the latest twrp beta version. Then use LG up to flash stock kdz again to get a working device.
.
Hello
Can some send me a TWRP backup of their Mate SE? I only need the boot image. Please just the boot partition. I don't have a good internet where I am at right now and I bricked. Thanks!
Sandman-007 said:
Hello
Can some send me a TWRP backup of their Mate SE? I only need the boot image. Please just the boot partition. I don't have a good internet where I am at right now and I bricked. Thanks!
Click to expand...
Click to collapse
Unlocked for a whole , what, 3 hours , and you brick already.
Sorry had to do that.
I don't have mate , but 7x the roms are supposedly basically the same. At least the 7x custom roms work on se.
I have boot image uploaded , along with the the rest of the partitions , as separate files. On Android file host. You can. Try to use that.
As far as mate back up I have found one, but it is whole backup.
https://androidfilehost.com/?w=files&flid=261152
mrmazak said:
Unlocked for a whole , what, 3 hours , and you brick already.
Sorry had to do that.
I don't have mate , but 7x the roms are supposedly basically the same. At least the 7x custom roms work on se.
I have boot image uploaded , along with the the rest of the partitions , as separate files. On Android file host. You can. Try to use that.
As far as mate back up I have found one, but it is whole backup.
https://androidfilehost.com/?w=files&flid=261152
Click to expand...
Click to collapse
LOL what can I say, I took one for the team!
Thanks, I actually found a boot.img for a 7x that I fastboot flashed but it didn't help. I am downloading a Full TWRP backup for the Mate SE that I found but my internet at my GFs is real slow so gonna take a couple hours. I'll update.
What Roms for 7x work on SE? Maybe I will just flash one of those? My phone wasn't on Oreo so I don't imagine an Oreo ROM working,
Oh and I bricked by flashing Magisk and no-verify 4.1. I knew I shouldve stayed away from Magisk and just flashed SuperSU
Sandman-007 said:
LOL what can I say, I took one for the team!
Thanks, I actually found a boot.img for a 7x that I fastboot flashed but it didn't help. I am downloading a Full TWRP backup for the Mate SE that I found but my internet at my GFs is real slow so gonna take a couple hours. I'll update.
What Roms for 7x work on SE? Maybe I will just flash one of those? My phone wasn't on Oreo so I don't imagine an Oreo ROM working,
Oh and I bricked by flashing Magisk and no-verify 4.1. I knew I shouldve stayed away from Magisk and just flashed SuperSU
Click to expand...
Click to collapse
I have it downloaded already and have put the images up as files.
***updating this in 5 minutes with link***
mrmazak said:
I have it downloaded already and have put the images up as files.
***updating this in 5 minutes with link***
Click to expand...
Click to collapse
Ok Thanks. So which Rom were u referring too because I only see one and it's Oreo based.
Sandman-007 said:
Ok Thanks. So which Rom were u referring too because I only see one and it's Oreo based.
Click to expand...
Click to collapse
I'm reading through the Mate thread again to see which ones. I think it was the manual Oreo update that worked, but have not found that claim yet.
here is link to folder, still uploading files , but boot is ready
https://www.androidfilehost.com/?w=files&flid=266003
mrmazak said:
I'm reading through the Mate thread again to see which ones. I think it was the manual Oreo update that worked, but have not found that claim yet.
here is link to folder, still uploading files , but boot is ready
https://www.androidfilehost.com/?w=files&flid=266003
Click to expand...
Click to collapse
Thanks downloading now. I do believe it was the manual Oreo. It works for the L31
Sandman-007 said:
Thanks downloading now. I do believe it was the manual Oreo. It works for the L31
Click to expand...
Click to collapse
found the post i remeber reading.
https://forum.xda-developers.com/showpost.php?p=76286950&postcount=159
mrmazak said:
I'm reading through the Mate thread again to see which ones. I think it was the manual Oreo update that worked, but have not found that claim yet.
here is link to folder, still uploading files , but boot is ready
https://www.androidfilehost.com/?w=files&flid=266003
Click to expand...
Click to collapse
Thank You! That worked! My phone boots. That funny because I tried 2 other boot.img for the 7x but they didn't work. Thanks!
Edit: Welp Spoke too soon. I boot but get a black screen once I hit home screen. Trying a Factory reset. I did one earlier but ehhh...
Sandman-007 said:
Thank You! That worked! My phone boots. That funny because I tried 2 other boot.img for the 7x but they didn't work. Thanks!
Edit: Welp Spoke too soon. I boot but get a black screen once I hit home screen.
Click to expand...
Click to collapse
that last boot is from mate backup.
try to go inside , to dark room to see if screen is really blank or just turned down real low.
the brightness on these seem to be able to go way too low.
mrmazak said:
that last boot is from mate backup.
try to go inside , to dark room to see if screen is really blank or just turned down real low.
the brightness on these seem to be able to go way too low.
Click to expand...
Click to collapse
I can see the nav bar and the power menu options. Launcher just wont start. I think I need to flash system image
Sandman-007 said:
I can see the nav bar and the power menu options. Launcher just wont start. I think I need to flash system image
Click to expand...
Click to collapse
well, lets review what you did , and maybe figure out what is "broke" maybe less drastic than system flash is needed.
mrmazak said:
well, lets review what you did , and maybe figure out what is "broke" maybe less drastic than system flash is needed.
Click to expand...
Click to collapse
Ok. SO after I unlocked my bootloader I flashes TWRP 3.1.1-0. I can't find 3.1.1-1 for the 7x even tho that is the one ppl say to use since it supports decrypt.
Then I flashed the latest Magisk and no-verity 4.1. When my system didn't boot I tried n-verity 6.0 then 5.1 as I thought I was using the wrong version but it didn't help.
I did try flashing the uninstaller for Magisk but it fails to flash. Can't find /Vender it says. Honestly I should've just flashed SuperSU.
Sandman-007 said:
Ok. SO after I unlocked my bootloader I flashes TWRP 3.1.1-0. I can't find 3.1.1-1 for the 7x even tho that is the one ppl say to use since it supports decrypt.
Then I flashed the latest Magisk and no-verity 4.1. When my system didn't boot I tried n-verity 6.0 then 5.1 as I thought I was using the wrong version but it didn't help.
I did try flashing the uninstaller for Magisk but it fails to flash. Can't find /Vender it says. Honestly I should've just flashed SuperSU.
Click to expand...
Click to collapse
Maybe need to flash vendor partition.
Still uploading that file. Is at 33%Done
It is 822 mb
Version I am putting up is from the b130 backup
Check back in file host folder in about 15-20 minutes. Or continue with the original full backup download. Done
mrmazak said:
Maybe need to flash vendor partition.
Still uploading that file. Is at 33%Done
It is 822 mb
Version I am putting up is from the b130 backup
Check back in file host folder in about 15-20 minutes. Or continue with the original full backup download. Done
Click to expand...
Click to collapse
Thank you. It'll be a few hours but I will get back to you!
mrmazak said:
Maybe need to flash vendor partition.
Still uploading that file. Is at 33%Done
It is 822 mb
Version I am putting up is from the b130 backup
Check back in file host folder in about 15-20 minutes. Or continue with the original full backup download. Done
Click to expand...
Click to collapse
Well I tried flashing Boot, System and Vender and I still have the blank screen. I even wiped system and Data then reflashed. I suspect the system.img is different for Mate SE and I am flashing 7x System.img
Sandman-007 said:
Well I tried flashing Boot, System and Vender and I still have the blank screen. I even wiped system and Data then reflashed. I suspect the system.img is different for Mate SE and I am flashing 7x System.img
Click to expand...
Click to collapse
The folder I shared is the mate se backup.
mrmazak said:
The folder I shared is the mate se backup.
Click to expand...
Click to collapse
Any suggestions then because I flashed all the files after a full wipe and I still get a Black Screen with nav bar showing and power options showing but no launcher
Sandman-007 said:
I can see the nav bar and the power menu options. Launcher just wont start. I think I need to flash system image
Click to expand...
Click to collapse
i bricked mine within a day, same reason: magisk + no-verify. Can't say for sure why, I installed magisk ok, no-verify had zip error, but installed anyway, then I wiped caches. result = no boot. Maybe I shouldn't have wiped?
I was able to recover using someone else's backup imgs and part of the process here:
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
I used fastboot to flash the system and boot imgs and used twrp to flash the vendor img. I think that was the trick, just using fastboot to flash the vendor resulted in the black screen with nav controls only.
drunkle said:
i bricked mine within a day, same reason: magisk + no-verify. Can't say for sure why, I installed magisk ok, no-verify had zip error, but installed anyway, then I wiped caches. result = no boot. Maybe I shouldn't have wiped?
I was able to recover using someone else's backup imgs and part of the process here:
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
I used fastboot to flash the system and boot imgs and used twrp to flash the vendor img. I think that was the trick, just using fastboot to flash the vendor resulted in the black screen with nav controls only.
Click to expand...
Click to collapse
OK I tried that. Selected the vender partition in TWRP and flashed vender img on top. Still black screen.
I have a USA variant, just got the Oreo / EMUI 8.0 update. Everything is stock.
I got my bootloader unlock code from Honor support (via the Google forms the USA Support tweeted out).
All guides for unlocking the bootloader and rooting are for Nugat (7.0).
I am wondering a few things.
1) Has anyone unlocked/rooted Oreo? What steps did you take? What TWRP version are you using (a link is preferable, if you have one)? Did you use the multi-tool, or directly with adb?
2) What root solution did you use? I prefer SU over magisk (for the ability to use xposed), but I heard SU isn't working, only magisk? What version did you use?
3) What backup system do you use when your phone will wipe everything for unlocking the bootloader? Is the Huawei stock "Backup" app that it comes with any good? Any better ones to use?
Basically there's no walkthrough for rooting with the current setup. It'd be awesome if someone wrote one that was basically:
- Backup using W method (backup app, or alternative).
- Unlock bootloader using X method (adb/multi-tool/whatever).
- Root using Y method (TWRP version, SU or magisk, and version numbers)
- Do Z activity (anything else to flash after? xposed? etc.?)
Any thoughts appreciated.
arebelspy said:
I have a USA variant, just got the Oreo / EMUI 8.0 update. Everything is stock.
I got my bootloader unlock code from Honor support (via the Google forms the USA Support tweeted out).
All guides for unlocking the bootloader and rooting are for Nugat (7.0).
I am wondering a few things.
1) Has anyone unlocked/rooted Oreo? What steps did you take? What TWRP version are you using (a link is preferable, if you have one)? Did you use the multi-tool, or directly with adb?
2) What root solution did you use? I prefer SU over magisk (for the ability to use xposed), but I heard SU isn't working, only magisk? What version did you use?
3) What backup system do you use when your phone will wipe everything for unlocking the bootloader? Is the Huawei stock "Backup" app that it comes with any good? Any better ones to use?
Basically there's no walkthrough for rooting with the current setup. It'd be awesome if someone wrote one that was basically:
- Backup using W method (backup app, or alternative).
- Unlock bootloader using X method (adb/multi-tool/whatever).
- Root using Y method (TWRP version, SU or magisk, and version numbers)
- Do Z activity (anything else to flash after? xposed? etc.?)
Any thoughts appreciated.
Click to expand...
Click to collapse
Already covered in this thread.
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
mrmazak said:
Already covered in this thread.
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
Click to expand...
Click to collapse
That didn't even cover a fraction of the questions I posted. It *maybe* gave the relevant TWRP build, though even that is in question, as one of the most recent posts was "I couldn't get any of the TWRP versions listed in this thread to work fully. " and suggesting something else.
I'm curious if anyone has actually rooted stock 8.0 and what process they used.
arebelspy said:
That didn't even cover a fraction of the questions I posted. It *maybe* gave the relevant TWRP build, though even that is in question, as one of the most recent posts was "I couldn't get any of the TWRP versions listed in this thread to work fully. " and suggesting something else.
I'm curious if anyone has actually rooted stock 8.0 and what process they used.
Click to expand...
Click to collapse
It also said backup partitions when in twrp image mount, and flash magisk 16 for root.
I'm about to try this same exact thing the twrp Oreo thread is a little confusing.
K easy part done bootloader unlocked
Update: installed twrp. Did a few backups. Flashed magisk. Rooted now restoring apps in titanium backup. Adaway finally and going to clean up system. ? Safety net passes. Just a little confused on how to restore if I end up in a boot loop. I'm trying to backup still in twrp. But can't backup data and I don't see boot.img to backup. So yeah I'm scared.
arebelspy said:
That didn't even cover a fraction of the questions I posted. It *maybe* gave the relevant TWRP build, though even that is in question, as one of the most recent posts was "I couldn't get any of the TWRP versions listed in this thread to work fully. " and suggesting something else.
I'm curious if anyone has actually rooted stock 8.0 and what process they used.
Click to expand...
Click to collapse
I had posted that. Use this TWRP. Flash Magisk 16 through TWRP. Enjoy root.
---------- Post added at 11:45 PM ---------- Previous post was at 11:41 PM ----------
allrockedout said:
K easy part done bootloader unlocked
Update: installed twrp. Did a few backups. Flashed magisk. Rooted now restoring apps in titanium backup. Adaway finally and going to clean up system. Safety net passes. Just a little confused on how to restore if I end up in a boot loop. I'm trying to backup still in twrp. But can't backup data and I don't see boot.img to backup. So yeah I'm scared.
Click to expand...
Click to collapse
Flashing kernel.img and system.img from the Oreo update.zip should completely fix a bootloop/brick. I had messed around and bootlooped one of mine, and had to extract those .img files to flash them through fastboot to restore my phone. It will erase the system though so a backup of data through Titanium Backup should be safe.
ryang872 said:
I had posted that. Use this TWRP. Flash Magisk 16 through TWRP. Enjoy root.
---------- Post added at 11:45 PM ---------- Previous post was at 11:41 PM ----------
Flashing kernel.img and system.img from the Oreo update.zip should completely fix a bootloop/brick. I had messed around and bootlooped one of mine, and had to extract those .img files to flash them through fastboot to restore my phone. It will erase the system though so a backup of data through Titanium Backup should be safe.
Click to expand...
Click to collapse
Where can I get system.img and kernel.img can you share it. I'm barely able to reboot keeps rebooting and booting into safe mode. Takes me like 10 minutes to boot to system. can barely get into twrp
allrockedout said:
Where can I get system.img and kernel.img can you share it. I'm barely able to reboot keeps rebooting and booting into safe mode. Takes me like 10 minutes to boot to system. can barely get into twrp
Click to expand...
Click to collapse
Gonna upload them now. I'll edit this post when they're finished. Did you have root before updating to Oreo?
ryang872 said:
Gonna upload them now. I'll edit this post when they're finished. Did you have root before updating to Oreo?
Click to expand...
Click to collapse
No I waited for Oreo before I rooted. I just rebooted again and booted back to system fine. I made a bunch of backups in twrp. But there useless if you don't have booted.img system and data.
allrockedout said:
No I waited for Oreo before I rooted. I just rebooted again and booted back to system fine. I made a bunch of backups in twrp. But there useless if you don't have booted.img system and data.
Click to expand...
Click to collapse
there is no "boot.img" on oreo.
the traditional boot.img has been split into 2 partitions. kernel.img and ramdisk.img.
mrmazak said:
there is no "boot.img" on oreo.
the traditional boot.img has been split into 2 partitions. kernel.img and ramdisk.img.
Click to expand...
Click to collapse
So we need kernel.img ramdisk.img which is boot. Than we need system and data. How do you flash the kernel and ramdisk when in twrp? I'm guessing ramdisk we select recovery ramdisk...and kernel? I got system and data backed up
Flashing kernel.img through "fastboot flash boot kernel.img" absolutely solved my bootloop/brick problem. I am completely new to Huawei phones so if I'm wrong please don't let me spread misinformation.
---------- Post added at 12:43 AM ---------- Previous post was at 12:41 AM ----------
allrockedout said:
So we need kernel.img ramdisk.img which is boot. Than we need system and data. How do you flash the kernel and ramdisk when in twrp? I'm guessing ramdisk we select recovery ramdisk...and kernel? I got system and data backed up
Click to expand...
Click to collapse
You'd need to flash kernel as boot through fastboot(fastboot flash boot kernel.img). TWRP would be ramdisk (fastboot flash recovery_ramdisk *****.img). System and Data backed up through TWRP can be restored through TWRP. At least those worked for me in restoring a bootloop/brick.
---------- Post added at 01:00 AM ---------- Previous post was at 12:43 AM ----------
allrockedout said:
Where can I get system.img and kernel.img can you share it. I'm barely able to reboot keeps rebooting and booting into safe mode. Takes me like 10 minutes to boot to system. can barely get into twrp
Click to expand...
Click to collapse
system.img kernel.img
EDIT: This is for L34 update.zip. I'm going out on a limb by assuming that all honor 7x/mate se versions are the same minus the modem_***.img files. USE AT YOUR OWN RISK.
allrockedout said:
So we need kernel.img ramdisk.img which is boot. Than we need system and data. How do you flash the kernel and ramdisk when in twrp? I'm guessing ramdisk we select recovery ramdisk...and kernel? I got system and data backed up
Click to expand...
Click to collapse
Each partition is it's own. Kernel is kernel, ramdisk is ramdisk, etc.
Recovery_ramdisk is recovery_ramdisk
I preferred to make each partition backup as images. Using adb shell and DD commands.
I know it is not in this thread. But in the "(nougat) twrp complete" thread.
This is linked in I believe post two. Where it describes making backup useing DD.
But the partitions are different in oroe, so need to use different codes as in that thread.
I just posted almost same thing yesterday with the links.
Use this guide to make back up. But substitute the partition layout from the following link
Oreo layout
I might be putting together a script that does the backup form you . And put it into a zip file that you run as a twrp install.
I like that idea. Now I said it out load, yeah I like it
I made first draft of my dd back up install.
It makes new directory on external card "twrp_backup" then makes dd copies of all 56 partitions. It takes a while to complete. , but gives you all the partitions, as they are. I added echo lines to the script to give you stautus of the backup, but the output is not shown on trwp install window. And it appears to be doing all the lines of the script at same time, not one at a time. So even if the echo commands printed output , it would be all at once.
well hold off on that statement of "it works" 30 minutes plus and still running.
No errors in current log, Adb shell ls (backup directory) shows all partitions. But mtp only showing 42 out of 56.
It appears to be hanging somewhere.
Will update when I find it.
update..
It worked. All 56 partitions backed up. took over an hour. then I realized I had internal storage full of junk. Userdate backup took 23GB.
as long as your data is not so full, should be better time.
maybe someone else can help edit it to be better script.
completed recovery log attached. Truncated to remove screen timeout (sleep and wake messages)
mrmazak said:
I made first draft of my dd back up install.
It makes new directory on external card "twrp_backup" then makes dd copies of all 56 partitions. It takes a while to complete. , but gives you all the partitions, as they are. I added echo lines to the script to give you stautus of the backup, but the output is not shown on trwp install window. And it appears to be doing all the lines of the script at same time, not one at a time. So even if the echo commands printed output , it would be all at once.
well hold off on that statement of "it works" 30 minutes plus and still running.
No errors in current log, Adb shell ls (backup directory) shows all partitions. But mtp only showing 42 out of 56.
It appears to be hanging somewhere.
Will update when I find it.
maybe someone else can help edit it to be better script.
Click to expand...
Click to collapse
To return to stock recovery and factory reset what do I restore? Do I need to wipe anything?
allrockedout said:
To return to stock recovery and factory reset what do I restore? Do I need to wipe anything?
Click to expand...
Click to collapse
none of those would be stock recovery. Because in order to have made that backup, you would have been on twrp. So the backup would be also twrp.
need to get the stock oreo recovery from extracting the recovery_ramdisk from update.app. update.app is in the update.zip of your oreo update. The main zip , not the "public" or "hw" one.
once you have the image. select install menu in twrp. change to install image. And install to "recovery ramdisk" also can be done with fastboot.
mrmazak said:
none of those would be stock recovery. Because in order to have made that backup, you would have been on twrp. So the backup would be also twrp.
need to get the stock oreo recovery from extracting the recovery_ramdisk from update.app. update.app is in the update.zip of your oreo update. The main zip , not the "public" or "hw" one.
once you have the image. select install menu in twrp. change to install image. And install to "recovery ramdisk" also can be done with fastboot.
Click to expand...
Click to collapse
K im downloading the update.zip now from firmware finder. I want to do another clean install magisk is force closing now. I'm using the p10 lite twrp.
---------- Post added at 10:13 AM ---------- Previous post was at 09:39 AM ----------
mrmazak said:
none of those would be stock recovery. Because in order to have made that backup, you would have been on twrp. So the backup would be also twrp.
need to get the stock oreo recovery from extracting the recovery_ramdisk from update.app. update.app is in the update.zip of your oreo update. The main zip , not the "public" or "hw" one.
once you have the image. select install menu in twrp. change to install image. And install to "recovery ramdisk" also can be done with fastboot.
Click to expand...
Click to collapse
im having trouble extracting update.app i cant open it on my pc.
---------- Post added at 10:24 AM ---------- Previous post was at 10:13 AM ----------
allrockedout said:
K im downloading the update.zip now from firmware finder. I want to do another clean install magisk is force closing now. I'm using the p10 lite twrp.
---------- Post added at 10:13 AM ---------- Previous post was at 09:39 AM ----------
im having trouble extracting update.app i cant open it on my pc.
Click to expand...
Click to collapse
im downloading huawei update extractor
K I'm going to extract this
Here is stock recovery ramdisk for Honor 7x USA Oreo. https://drive.google.com/file/d/1IylCAhGs304boVkSXnSRrQQ1B5ozHwcX/view?usp=drivesdk
I haven't tested it yet. Going to flash in twrp. Hopefully boot back into stock recovery and factory reset.
I also extracted kernel.img.
I successfully flashed kernel and ramdisk recovery. I rebooted back into stock recovery. Going to try factory reset now.
?
Wouldnt boot up.
Flashed kernel.img through twrp didnt work had to flash through adb and it seems to be booting now.
HELL YEAH!! ok booted up to system now.
LG V30 T-Mobile H932 20r ROM
For U.S. T-mobile H932 ONLY. Do NOT install this on any other V30/V30+/V30S except U.S. T-mobile H932. You will brick your phone.
DISCLAIMER : I do not hold responsiblity for any of the following but not limited to : Bricks due to not reading, nuclear war, cat dying. I will not be held responsible for any damage of any kind due to the result of this zip. It is held under your own risk. This does not mean that i wont help in any way shape or form to recover from anything that may happen at the result of flashing this zip. PLEASE FLASH RESPONSIBLY! PS. This zip has NOT been tested by me!
This Rom is 100% Stock. Most recent TWRP should first be installed. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ. It contains almost the complete 20r firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM once booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
Features
Stock build made from official KDZ
Stock Build.prop
Unrooted
system.img modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Added DTS build prop
Added all lockscreen weather animations build prop
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
When you need Root, Latest Magisk [Download]
H93220r.zip [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 20r firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occure, maybe you need to do a factory reset to start fresh*
Flash the 20r zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)
Rom Version
Android Version: 8.0 Oreo
Android security patch level: 2019-1-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...
#RESERVED
Please to anyone who had issues with the zip.....
We have a fix!
Flash this zip
https://www.androidfilehost.com/?fid=1395089523397908552
Then flash a rom from your SD CARD
ONLY FLASH THIS OF YOU HAD A BRICK FROM 20R!!
Zip is live! Enjoy!
your zip name is wrong.. should be h93220r* ( it doesnt matter but i was confused at first)
also, i flashed it and nothing happened. my system is still the same as i was before (20p)
and in the script, i think it says 'model=VS996' or something. since it just words, it may not matter.
but maybe you used the wrong script for h932
In any case, the zip did nothing for me. flashing only took about 10 secs in total, and flashing system barely took a second.
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
JohnFawkes said:
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
Click to expand...
Click to collapse
Did you remove the file?
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Did you remove the file?
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
Ahh ok, thought I was missing something.
Sent from my LG-H932 using XDA Labs
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
looking forward to the fix.
I figured people might want these files.
Root-System-Media
Uploading new zip now! figured out all issues
JohnFawkes said:
Uploading new zip now! figured out all issues
Click to expand...
Click to collapse
Awesome thank you!
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Awesome thank you!
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
no problem. should be live in about 15 minutes
zip is live!
Awesome. Woke up this morning to the system update notification. Glad there are still T-Mobile users around here that works to get this stuff out. Downloading now. Will report back after I flash it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:19 AM ----------
BROKEN1981 said:
I figured people might want these files.
Root-System-Media
Click to expand...
Click to collapse
Are these new in this update?
JohnFawkes said:
zip is live!
Click to expand...
Click to collapse
At the end of the flash it looks like it flashed fine but then it tells me it failed to mount everything. When I go to reboot into the system it tells me there is no OS. I was just going to flash the 20p zip I had but then it restarted and now I can't get into TWRP again. Now it just restarts into fastboot mode
UPDATE: I was able to get back into TWRP by going through the factory reset option (Volume down + Power, etc.) I'm now flashing the 20p zip I have.
UPDATE 2: Didn't work. Got into a bootloop. Restoring an old Lineage backup I have. Should have made a backup of my current state before flashing but I wasn't thinking
UPDATE 3: That didn't work either. Everything I flash it tells me failed to mount '/persist-lg' and just boot loops. I guess the next thing to do is try and use LGUP to restore
Same here as above. Doesnt mount system persist cache.
sunmybun said:
Same here as above. Doesnt mount system persist cache.
Click to expand...
Click to collapse
Flashing anything else doesn't fix it either. My phone is chillin' in recovery mode until I can figure it out
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
JohnFawkes said:
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
Click to expand...
Click to collapse
Thanks. Searching around, I see there have been people having issues like this before with other devices. Something to do with the persist.img. Did the last zip include one? Also, I hope whatever it is can be fixed with a new zip. I don't know why restoring a backup or flashing an old full stock zip wouldn't fix anything.
This is basically what I'm getting
http://en.miui.com/thread-467490-1-1.html
Hey Guys,
I present you the Custom Rom for T830 :good: Clean, Fast, Smooth and will be updated in regular basis.
And as we say always "VOTE" and if you Vote Not working please take the time to explain. Thank you
Now V2.3
Credits:
Thank you to @sevsman that create this beautiful ROM, Incredible job making it so fast. I am only the tester and I am glad to be able to share with you all.
Thank you to @Mentalmuso for his great kernel Weta latest TF5
Thank you to @topjohnwu for Magisk
Thank you to the creator of the Encryption Disabler @ianmacd
As usual I am not responsible for any damage cause to your tablet flashing this ROM:angel:
Some advice for newbies:
DRIVERS
There is no way to use PC with USB cable and flash with ODIN if you have not intaled the Samsung Drivers, search for these with your PC browser
OEM UNLOCKING
Go to settings/ About tablet/ Software information/ press build number 7 times to activate DEV mod
Go bac to setting down Developer Options that now apear
Tick Unlock OEM Your tablet will reboot and wipe everything so backup
Redo all setup Finish it even update if needed
FORCE REBOOT
Press and hold 3 keys Power/ Vol+/ Vol-
RECOVERY MODE
Power off tablet
Press and hold Power/ Vol+
DOWNLOAD MODE
For me the only thing that works is is at the same time force reboot when tablet off and connect usb cable to computer.
FLASHING ANYTHING WITH ODIN
ROM:
Place AP in AP
CSC_CSC_xxxxx in CSC
Place BL in BL
TWRP
Untick reboot in second tab
Place TWRP in AP
CHECK IF YOU NEED TO FORMAT DATA IN RECOVERY MODE
Boot in recovery mode
Select install
Select Storage on the bottom
If internal is 0mb you need to format data before doing anything that will allow you to wipe or zip anything but will cleann all you have on the tablet so Backup before
ROM FEATURES
Stock TF5
Rooted with Magisk latest and Weta Kernel latest
Heavy Debloat, most of the stuff you can install with Playstore is gone + some unneeded Samsung and Google stuff. No Knox, No Bixby, no Kids stuff, No digital wellbeing, No Microsoft stuff. It could definitely be cleaner; well that's for next version with maybe some more tweaking on Google and Samsung to reinforce privacy and improve battery life. Give us your ideas.
For now you still get Samsung Account, Samsung Store, Samsung DEX, Samsung Notes, Google Account, Google Playstore and Google
If you want to debloat more install Debloater module in Magisk and run it from Termius (Playstore) Example I got rid of Samsung Video Player, My Files, and hide Phone and Message as I don't use these and my App screen has no more than 11 apps before installing what I need.
Also for some interesting tweaking follow this thread and get rid of all: https://forum.xda-developers.com/galaxy-tab-s4/how-to/tweak-tab-s4-debloat-root-plugins-t4088699 still work pretty good except XPosed (Too bad!), Proca and few others but to disable big brothers It works fine. This is a great thread by @doggydog2
How To Flash this Rom:
OEM SHOULD BE UNLOCKED. THERE IS NO WAY TO TO THE FOLLOWING WITHOUT THIS STEP.
You need TWRP Installed. You can use flashify if you are already rooted to flash the new TWRP. If you don't know how refer to this thread from Mentalmuso: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Reboot in Recovery
Factory reset, Wipe all but SD, Format Data (Very Important) (YOU WILL BE LOSING ALL YOUR DATAS SO BACKUP WHAT YOU NEED)
Flash the Zip file
Flash Encryption Disabler for now https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 Thread from Metalmuso, look in Android 10 forlder
Reboot
Finish setup
Update Google Apps
Update Samsung Apps
Launch Magisk and press OK , device will reboot
Enjoy!
If you need to pass ctsProfile to true, flash "[MODULE] MagiskHide Props Config - SafetyNet, prop edits" from here: https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228/post83146179 Downlaod magisk module,open termiux SU, Launch props select "2 Basic Autentification"
That doesnt fix Netflix in L1 even hidding Magisk. We wiill not implement that in the next update.
If you have issues with Bluetooth pairing not sticking after reboot go to Magisk, download module Bluetooth Library patcher 1.9 and install itin magisk, that will solve the issue.
Changes v2.3:
Fix /data not mounted
Fix Bluetooth not keeping devices BT after reboot
Downloads:
T830 v2.3
https://drive.google.com/file/d/10TPT-c9o_DNKZDUvshO2OQer6urVUwmc/view?usp=sharing
T835 v2.3
https://drive.google.com/file/d/1eqQkG-IgxIfK2FbItPqzu_Ujk4NHc0eR/view?usp=sharing
We need comments on T835 install please
For T835, I have 2 report that Iris detection is not working, that's need confirmation. It works perfectly for T830
Now with this ROM you don't need Odin after installing TWRP
Game add https://forum.xda-developers.com/attachment.php?attachmentid=5079465&d=1597424859
Please comment if you test it
Thanks
enotar
Beer Fund : https://www.paypal.me/ion513
Thanks looks interesting. Will this be available for the SM-T835? if so i will definitely like to try it out
A huge thanks to @ianmacd for the disabler because without it we'd all be in the can :good:
Here's v1 for the T835 and @enotar will update the first post later today.
https://drive.google.com/file/d/1A8YHmPy7zSEY8sOz8qE3Achl1qTmu3hA/view?usp=drivesdk
Sweet! Nice to see our Tabs have not been forgotten about. Look forward to giving this a try!
Google Drive folder T830 and link to T830 rom shared to all.
@enotar This is extremely exciting as I didn't think there'd be support like this for the Tab S4! I just have a question before I attempt this: Do I need to already be on Android 10 before flashing this rom or am I able to flash it from Android 9? I'm asking because I have the WETA Kernal + TWRP + Magisk installed, but on Android 9 (T830). Because of this, I'm not able to use system update to update to Android 10. If not, is there another way to flash this rom?
SavXL said:
@enotar This is extremely exciting as I didn't think there'd be support like this for the Tab S4! I just have a question before I attempt this: Do I need to already be on Android 10 before flashing this rom or am I able to flash it from Android 9? I'm asking because I have the WETA Kernal + TWRP + Magisk installed, but on Android 9 (T830). Because of this, I'm not able to use system update to update to Android 10. If not, is there another way to flash this rom?
Click to expand...
Click to collapse
ive used same combination, and upgrade method looks like this: flash frresh twrp 3406 img right from twrp, wipe everything from recovery, and flash this rom.
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
found 1 bug:
if you use iris unlock, there are glitches instead of eyes reflections
shoonari said:
ive used same combination, and upgrade method looks like this: flash frresh twrp 3406 img right from twrp, wipe everything from recovery, and flash this rom.
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
found 1 bug:
if you use iris unlock, there are glitches instead of eyes reflections
Click to expand...
Click to collapse
Can you explain more detailed as I have no issue here with Iris
And yes Android 10 is not needed just TWRP and BTW you need to come with something, 8, 9 or 10 to install TWRP
I will repeat myself do not wipe SD dont cross the box, you'll be very sad.
Sent from my SM-T830 using Tapatalk
enotar said:
Can you explain more detailed as I have no issue here with Iris
And yes Android 10 is not needed just TWRP and BTW you need to come with something, 8, 9 or 10 to install TWRP
I will repeat myself do not wipe SD dont cross the box, you'll be very sad.
Sent from my SM-T830 using Tapatalk
Click to expand...
Click to collapse
May I ask what BTW is?
This is how it looks for me(see attached file)
Moreover, i can't use intelligent scan, cause it says "can't open camera"
I thought this is because backup i used(who knows), but with second clean install everything is still the same
wings516 said:
May I ask what BTW is?
Click to expand...
Click to collapse
BTW = By the way.
---------- Post added at 05:17 PM ---------- Previous post was at 04:55 PM ----------
enotar said:
Hey Guys,
I present you the Custom Rom for T830 :good: Clean, Fast, Smooth and will be updated in regular basis.
Please comment if you test it
Thanks
enotar
Click to expand...
Click to collapse
Installation went so smoothly. Thank you for this excellent rendition of a debloated Stock ROM. I had a debloated version on my old Tab S2 tablet. So far so good. :good::good::good::good::good:
shoonari said:
This is how it looks for me(see attached file)
Moreover, i can't use intelligent scan, cause it says "can't open camera"
I thought this is because backup i used(who knows), but with second clean install everything is still the same
Click to expand...
Click to collapse
Strange, not getting that. Anyway I will review.
If this is not too much can you completly clean flash following OP please
Thank you
wings516 said:
May I ask what BTW is?
Click to expand...
Click to collapse
BTW means "by the way", it's not a file, lol. (Also I didn't see that someone mentioned this before me, sorry)
I keep getting "Failed to mount '/data' when I go to install... hmm... does anyone have any idea?
Currently running TWRP 3.4.0.4 and Android 9.0.1
Do I need to use a lower version of twrp?
I reboot, and I just get the bootloop now.
wings516 said:
I keep getting "Failed to mount '/data' when I go to install... hmm... does anyone have any idea?
Currently running TWRP 3.4.0.4 and Android 9.0.1
Do I need to use a lesser twrp?
Click to expand...
Click to collapse
You need to use TWRP 3.4.0-6 not -4 and this thread Post 2 step by step: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Follow OP
Thank you
enotar said:
You need to use TWRP 3.4.0-6 not -4 and this thread Post 2 step by step: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Follow OP
Thank you
Click to expand...
Click to collapse
Hmm ok, I upgraded to 3.4.0-6 and still the same error and bootloop. I flashed the image and not through ODIN to install it to recovery.
I will go through and install the WETA kernel and encryption disabler.
wings516 said:
Hmm ok, I upgraded to 3.4.0-6 and still the same error and bootloop. I flashed the image and not through ODIN to install it to recovery.
I will go through and install the WETA kernel and encryption disabler.
Click to expand...
Click to collapse
Just followthe steps and it will work.
enotar said:
Just followthe steps and it will work.
Click to expand...
Click to collapse
Followed exactly, but every operation I try to do be it wipe or install, I get "Failed to mount '/data' (Invalid argument)
I'm assuming there is a corruption in my /data and I need to reformat. I'll report back after.
wings516 said:
Followed exactly, but every operation I try to do be it wipe or install, I get "Failed to mount '/data' (Invalid argument)
I'm assuming there is a corruption in my /data and I need to reformat.
Click to expand...
Click to collapse
Well formating data is one of the steps of the thread to install TWRP
enotar said:
Strange, not getting that. Anyway I will review.
If this is not too much can you completly clean flash following OP please
Thank you
Click to expand...
Click to collapse
Unfortunately, that doesn't help: (
What i did:
Downloaded once again
Full wipes, thru menu and twrp
Totally clean install, even no accounts added
And still same issue...btw, 1st boot takes 17 minutes! It's it normal?
---------- Post added at 12:26 PM ---------- Previous post was at 12:08 PM ----------
Forgot to add: iris scan is working asis and unlocks a tablet, issue is that i see glitches in popup window (instead of eyes), and not working intelligent scan