My device reboot only into bootloader and recovery - One (M8) Q&A, Help & Troubleshooting

Hi, I tried to install Android_Revolution_HD-One_M8_53.1_c8bf38 for my HTC one m8 eye device using twrp and it said installed successful but after that the phone is rebooting only into bootloader and recovery.
I don't have a recovery back up and I can't find one online for my version so what shall I do to get my phone working again?
Thank you in-advance.

Get a desire EYE compatible rom !

Mr Hofs said:
Get a desire EYE compatible rom !
Click to expand...
Click to collapse
can you please help me with a link? and my device is M8 one eye not desire, do they use the same ROM?
I tried flashing-0p6bimg-zip using this download http://forum.xda-developers.com/showpost.php?p=58457494&postcount=375 but it said large file and went into rebooting loop which didn't end till I removed the file from the sd card
Then I found somebody recommending this download RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.20.651.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418488_signed_2 and I tried it but finally I found my version is 4.35.40.1.3 and the one I was trying install is 4.20.651.10 and it said please get the correct ROM update utility and try again.

Sorry my bad, I meant M8 eye rom. Check the rom threads for a compatible one if they are there. I never used a eye and not up to date, but i think the normal M8 roms don't just work on the eye

Perhaps you can finde somthig you can use in this thread about How to root M8 Eye.

Aboemn said:
I tried flashing-0p6bimg-zip using this download http://forum.xda-developers.com/showpost.php?p=58457494&postcount=375 but it said large file and went into rebooting loop which didn't end till I removed the file from the sd card
Then I found somebody recommending this download RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.20.651.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418488_signed_2 and I tried it but finally I found my version is 4.35.40.1.3 and the one I was trying install is 4.20.651.10 and it said please get the correct ROM update utility and try again.
Click to expand...
Click to collapse
Those RUUs won't work on your device. The first is for the Euro M8 (not the EYE), and second is for Sprint M8. The RUU has to match your carrier version (CID) and model ID (MID). In fact, those RUUs are for a different hardware, and will fail to install. If they installed, they probably would brick your phone.
You need to find a 4.35.40.1.3 RUU, if it exists.

Related

[Q] Where can I find the RUU for HTC Asia WWE 1.29.707.11?

Hey guys anyone know where I can find the RUU for HTC ASIA WWE 1.29.707.11? Please let me know asap!
Have you tried looking in ruu thread or searching Google????
Sent from my HTC One X using Tapatalk 2
OP, one kind user will upload another mirror. Visit the dev sticky section, endeavor ship Rom collection is the thread name.
Sent from my HTC One X using Tapatalk 2
me too
me too, i'm looking for this... my phone is dead... tried installing RUU with previous version like 1.26 & 1.28.. but still failed(getting error 140)
please if you have one, please do upload, and we would be very thankful...
onat_kippz said:
me too, i'm looking for this... my phone is dead... tried installing RUU with previous version like 1.26 & 1.28.. but still failed(getting error 140)
please if you have one, please do upload, and we would be very thankful...
Click to expand...
Click to collapse
Try http://hoxroms.serveftp.com
Sent from my HTC One X
RUU for HTC_Asia_WWE_1.29.707.11
eyosen said:
Try http://hoxroms.serveftp.com
Sent from my HTC One X
Click to expand...
Click to collapse
thanks for your help mate, that link is already saved on my bookmark, still no updates for RUU for HTC_Asia_WWE_1.29.707.11
>ok what i did, i update OTA my HOX from version 1.28 to this 1.29.707.11
then i installed a custom tweak for status bar, knowing that it's not compatible with new version anymore, so after installing my status bar went blank, its gone...
so i decided to try to install a custom rom, i tried HD Revolution..
I copied the ROM file, then followed steps, like flashed superswipe then flashed the rom in the recovery... the custom rom is based on a different version, so it failed to install, then since i did a superswipe, now all files including system files on my phone is gone, it's completely empty
now my phone boots only up to the HTC logo screen...
the only solution that i can think is to flash RUU of 1.29.707.11.. is there any other option on how to fix this???
onat_kippz said:
thanks for your help mate, that link is already saved on my bookmark, still no updates for RUU for HTC_Asia_WWE_1.29.707.11
>ok what i did, i update OTA my HOX from version 1.28 to this 1.29.707.11
then i installed a custom tweak for status bar, knowing that it's not compatible with new version anymore, so after installing my status bar went blank, its gone...
so i decided to try to install a custom rom, i tried HD Revolution..
I copied the ROM file, then followed steps, like flashed superswipe then flashed the rom in the recovery... the custom rom is based on a different version, so it failed to install, then since i did a superswipe, now all files including system files on my phone is gone, it's completely empty
now my phone boots only up to the HTC logo screen...
the only solution that i can think is to flash RUU of 1.29.707.11.. is there any other option on how to fix this???
Click to expand...
Click to collapse
Hello onat_kippz,
I'm facing the same problem as you too. I think I'm in a "bootloop", can't get pass the HTC one(TM) screen with the beatsaudio logo at the bottom. You are facing the same thing too?
Like you, I have tried a few versions of RUU (ASIA WWE 1.28.707.10 and ASIA SEA WWE 1.29.728.12), the first one gave me an Error 140: Bootloader version error, and the second one i got an Error 130: Model ID Error. I was previously on 1.29.707.11.
Other than waiting for the RUU version to come out, have you thought of any ideas? I tried mounting the device in recovery mode and try to push a custom rom img file over, but i couldn't mount it at all. Would have been easier if there is an external microSD card slot. Never thought highly of the feature until now...
How I got into this mess in the first place? I was just trying to remove the irritating 3-dot menu at the bottom of most apps, and trying to save some screen real estate. Much regrets...
By the way, which country is your device from? Mine is from Malaysia.
I'm downloading the 1.29.707.11 and will upload and post in this thread http://forum.xda-developers.com/showthread.php?t=1543604 in next two hours if there is no one else upload it.
@maverickfoo
you can only run the 1.29.707.11, the Asia WWE RUU
ckpv5 said:
I'm downloading the 1.29.707.11 and will upload and post in this thread http://forum.xda-developers.com/showthread.php?t=1543604 in next two hours if there is no one else upload it.
@maverickfoo
you can only run the 1.29.707.11, the Asia WWE RUU
Click to expand...
Click to collapse
Hi, hope you managed to resolve your issue. If it worked for yours, it should work for mine too. I'll monitor the thread as you mentioned.
maverickfoo said:
Hi, hope you managed to resolve your issue. If it worked for yours, it should work for mine too. I'll monitor the thread as you mentioned.
Click to expand...
Click to collapse
I have no issue, just helping XDA members for the RUU.
Uploaded : http://forum.xda-developers.com/showpost.php?p=27227882&postcount=1135
maverickfoo said:
Hi, hope you managed to resolve your issue. If it worked for yours, it should work for mine too. I'll monitor the thread as you mentioned.
Click to expand...
Click to collapse
First some ground rules:
-You have to use your region's RUU (XXX in RUU x.xx.XXX.x name)
-You cannot install previous version of RUU on your phone once you install a newer version with a newer HBOOT. It won't work.
-With most custom ROMs, since they don't upgrade HBOOT even though they use a newer base such as 401.11, you have the freedom of going to a previous RUU version.
Once you download your RUU, take a look at here (thanks to JDR0iD):
http://forum.xda-developers.com/showthread.php?t=1599748
Also, you can use this tool to make your lifes easier (thanks to hasoon2000):
http://forum.xda-developers.com/showpost.php?p=24967468&postcount=1
If you don't want to lose whatever is on your phone, I would recommend running the RUU installer and while it's waiting for your OK on your PC, go to your %temp% directory, find the latest directory created, there you will find the rom.zip. Copy that to somewhere else (like your desktop), unzip and you will see all the img files you need: boot.img recovery.img hboot.img etc. Then you can use the tool in the second link to install these image files in proper order.
Or, if you don't care whats on the phone, hit OK on the RUU window
Thanks! problem solved!
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11
good news mate...
thru hours ofsearch I found this yesterday: http://runamux.com/search/download/file/bkVjhS5R/dc607_20120610-111112-cca77c8e/20/_612.549_KB/RUU_ENDEAVOR_U_ICS_40_hTC_Asia.exe
And now i already found this here at XDA, http://hoxroms.serveftp.com/
thanks to all uploaders.... My Phone is already fix...
onat_kippz said:
good news mate...
thru hours ofsearch I found this yesterday: http://runamux.com/search/download/file/bkVjhS5R/dc607_20120610-111112-cca77c8e/20/_612.549_KB/RUU_ENDEAVOR_U_ICS_40_hTC_Asia.exe
And now i already found this here at XDA, http://hoxroms.serveftp.com/
thanks to all uploaders.... My Phone is already fix...
Click to expand...
Click to collapse
brove can u just give me the recovery img from this download link
internet is kinda slow
u can find recovery in a zip somewhere in %temp%
thanks in advance..
hasibzaman said:
brove can u just give me the recovery img from this download link
internet is kinda slow
u can find recovery in a zip somewhere in %temp%
thanks in advance..
Click to expand...
Click to collapse
This is what you want.
recovery_signed.img
onat_kippz said:
good news mate...
thru hours ofsearch I found this yesterday:]
And now i already found this here at XDA,
thanks to all uploaders.... My Phone is already fix...
Click to expand...
Click to collapse
Thank you for posting the links, I couldn't find them elsewhere.
f r e a k s h a r e.com/files/mdkbdlms/RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed.exe.html

[Q] Bricked after OTA update failed

Hi I've been searching for days and have always been able to find answers but this one has got me.
My gf has a HTC Desire HD, pretty sure it's Vodafone since she works there. Tried to do a normal update a while ago and it never started since, just sits on the HTC logo. I can boot into fastboot hboot recovery and all that but I'm stuck as to what to do from here.
I have found a couple of WWE RUU's but the error out with a CID error, I've also found a Vodafone backup someone took from clockwork but this phone only has stock recovery and I don't know how to flash clockwork without being able to boot the phone.
Hoping someone might have an easy answer, please let me know if I need to provide more details.
Thanks.
If its rooted just place a rom on the sd and flash it with full wipe. You are not suppose to accept OTA updates if the phone is rooted if Im not mistaken. If not rooted then go to HTC websight and get the official RUU and install, instructions should be on websight.
http://www.htc.com/europe/help/htc-desire-hd/#download
primussw said:
Hi I've been searching for days and have always been able to find answers but this one has got me.
My gf has a HTC Desire HD, pretty sure it's Vodafone since she works there. Tried to do a normal update a while ago and it never started since, just sits on the HTC logo. I can boot into fastboot hboot recovery and all that but I'm stuck as to what to do from here.
I have found a couple of WWE RUU's but the error out with a CID error, I've also found a Vodafone backup someone took from clockwork but this phone only has stock recovery and I don't know how to flash clockwork without being able to boot the phone.
Hoping someone might have an easy answer, please let me know if I need to provide more details.
Thanks.
Click to expand...
Click to collapse
Get me the CID and Iwill provide u with a ruu that works...VODAFONE from where? not all ruu's are available, but at least we can find one that makes your phone back to work...:good:
Unfortuanately it isn't rooted, I probably would've had more luck by now if it was.
I can't see the CID on the bootloader is there a command on fastboot or something to find this? I've been searching but can't find anything.
Sorry I thought of that afterwards, it's Vodafone Australia.
Thanks for the replies guys!
I just tried that European RUU thought I didn't have anything to loose but it came back with ERROR 132 Signature Error.
The Australian HTC site doesn't have a RUU to download that I can see.
primussw said:
I just tried that European RUU thought I didn't have anything to loose but it came back with ERROR 132 Signature Error.
The Australian HTC site doesn't have a RUU to download that I can see.
Click to expand...
Click to collapse
Read up here and see if this can help you or not.
http://forum.xda-developers.com/showthread.php?t=905003
and
http://forum.xda-developers.com/showthread.php?t=857537
Also the other option is to go to the Ace Hack Kit forum IRC Chat room and speak to those guys there. They are Abolutely GREAT with any issues and they might be able to solve your issue. I would try them first. IRC chat towards the bottom of first main post.
http://forum.xda-developers.com/showthread.php?t=1259821
Good Luck
primussw said:
Unfortuanately it isn't rooted, I probably would've had more luck by now if it was.
I can't see the CID on the bootloader is there a command on fastboot or something to find this? I've been searching but can't find anything.
Sorry I thought of that afterwards, it's Vodafone Australia.
Thanks for the replies guys!
Click to expand...
Click to collapse
yep, do the following: boot in hboot and choose fastboot. Then plug the phone (check that you see fastboot usb in red)
Open cmd as admin or a terminal as root and then, type fastboot getvar all. Get the INFOcidnum and paste it here. With that I will try to find a ruu that works. But stop trying flashing other things...you might mess the device.
Hi
Thanks again for the help. The cidnum: VODAP021
Hope this helps, I haven't checked out those other links yet though.
primussw said:
Hi
Thanks again for the help. The cidnum: VODAP021
Hope this helps, I haven't checked out those other links yet though.
Click to expand...
Click to collapse
Ok, I will look for a RUU (to see if I can get one that works, and will send it over a PM)...:laugh:
No post it here in case someone else has the same problem so he too can get the file.
Sent from my Desire HD using xda premium
Solution!!
Ok firstly sorry it's taken me ages to post this but I finally came up with a solution to this problem using a few different guides and instructions on these forums.
So the problem was I had a Vodafone AU branded HTC Desire HD that had no root and a locked bootloader that was stuck in a bootloop after a failed official update. The main problem is that there is NO stock recovery ROM ANYWHERE for a Vodafone AU HTC Desire HD, trust me I looked and I am not new to looking for stuff like this. glevitan provided me with a WW ROM that I managed to get working with a bit of work, there are also many WW ROM's around that you should also be able to use. I'll try to explain as best I can as to how I got it to work (going from memory) so if anyone else has a similar problem they may be able to use this information.
1. Firstly find a suitable WW ROM to flash, it needs to be a PD98IMG.zip image to copy to an SD card. There is a Vodafone AU dump on this forum but that will not work if you are completely stock standard. I think you can get this zip from the RUU or maybe ask glevitan if he wouldn't mind helping in providing this again. I didn't want to link to his file but there are others around.
2. Create a goldcard. If you turn your SD card into a goldcard it will allow any ROM to be flashed, normally it would only accept the Vodafone AU one but by doing this it will accept the WW one. To do this I used a second phone to create the card.
I used the Ultimate multi tool which can be found here: http://forum.xda-developers.com/showthread.php?t=1180639
You may have to do a bit of reading on getting it to work, from memory you have to put in a number to a website to generate a file, I think I ended up using a different website, there's a few options in getting this done, google is your friend for this
3. Once the goldcard is created copy the PD98IMG.zip to the root directory and put it back into the phone.
4. Turn on the phone and boot to hboot by holding vol up (I think) on power on. The phone should automatically check for a suitable PD98IMG.zip file and as long as the goldcard process worked and you have a suitable ROM on the root directory it should flash it fine.
This is basically what I did and it successfully booted after a lot of looking around. I hope this helps people in the future with similar problems. If you need to ask any questions about this process as I haven't provided every single detail please feel free to contact me and I will do my best to help you out.
Thanks again to glevitan for helping and providing a suitable ROM to flash.

[Q] Why is my HTC One x (PROTOTYPE) stuck on ICS?

Why is my HTC One x (PROTOTYPE) stuck on ICS?
Hey guys, This is my first post ever on XDA so please forgive me if I sound like an idiot
I got hold of a HTC One x which was already had an unlocked bootloader, rooted and had CWM recovery installed. I was told that I have a prototype version of the one x. Anyway that is not issue. when I got the phone it was running android version 4.0.4 HTC Sense version 4.1 and I checked software update. The 3.14.401.27 OTA update was available so I proceeded with the update and after the reboot I found my phone stuck in a bootloop and the only way for me to sort it out was by restoring my nand back up from CWM. I really wanted the new Sense 5 UI and android jelly bean so I downloaded:
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Rad io_5.1204.162.29_release_292865_signed.exe
My CID was HTC__621 thats why I downloaded that ruu but after flashing it not was I only stuck in a bootloop but also when I entered recovery mode it was just a blank black screen with the back lights on. I even flashed different versions of CWM recovery and TWRP which gave me the same black screen so I flashed the stock recovery.img which also gave me the same black screen. I thought me maybe a different Ruu would resolve this issue so I used 'JBFWTOOL21' to change my CID to '11111111' this allowed me to flash:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radi o_5.1204.162.29_release_298897_signed.exe
&
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed.exe
After trying both these ruu's I still found my device stuck in a bootloop. Next I downloaded 'Endeavoru_CustomRUU' this contained a 'rom.zip' which I belive was a jelly bean rom and said it would update my image version to '3.14.401.31' after flashing this ruu, my phone booted up past the 'HTC Quietly Brilliant' screen but into a black screen but I could hear the boot sound and knew it booted up but it still gave me a black screen. barre in mind this was the only rom that booted up and didn't get stuck in a bootloop but the downside was I had no picture on the screen it was literally pitch black with the backlight on when it went past the 'HTC Quietly Brilliant' boot screen. I didn't even see the one x boot animation. I could only hear the boot up sound and once it was booted up the notification LED would flash I was receiving network settings from my operator. That was about it. I booted into recovery to see wether that worked but unfortunatelly it was also still giving me a black screen. The only thing I could boot into without a problem was 'power button + volume down' which booted into bootloader in which I chose 'fastboot' to flash all these roms.
At this point I thought my device was soft bricked so I gave it to my friends father who happened to really good with his IT skills. He managed to change my device's CID from 'HTC__621' to 'HTC__001' after doing so he downloaded this ruu and flashed it:
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radi o_2.1204.135.20_release_274900_signed.exe
This ruu turned out to work perfectly fine with my device. Everything functioned once again, the device was able to boot into recovery and boot normally without a hassle. I also discovered that this was the rom that I received my phone with which put me back to the start on android 4.0.4
I was really annoyed with the fact that I was stuck on ICS so I flashed the MaximusHD 21.1.0 rom and its boot.img which put me into a bootloop again. I also tried other custom roms such as Revolution and SD secxces which all put my phone in a bootloop even though I flashed their boot.img kernels. I knew that I required a hboot 1.33.0000 or above in order to flash jb roms so I used 'JBFWTOOL21' once again before flashing these custom roms to update my hboot from 1.12.0000 to 1.33.0000. so all these bootloops still occourd after doing all this and I just had to return back to ICS. barre in mind I only tried flashing JB roms as I want sense 5 so I don't know if a custom ics rom would work on my device as I havent tried it yet but I know for a full fact that none of the jb roms work on my device.
For those who are wondering here, I uploaded some pictures of my device just check the attachments. It has all the information you may want to know about my device (HTC One X PROTOTYPE).
I really hope someone can help me update to jelly bean and get sense 5 as I am frustrated from failing and being stuck in bootloops
If you read all of this I honestly appreciate it and I Thank you for it, I hope you can help me!
all you need to do is flash the stock recovery from this post>>>>>http://forum.xda-developers.com/showthread.php?t=1975140
I did that
nogotaclue said:
all you need to do is flash the stock recovery from this post>>>>>http://forum.xda-developers.com/showthread.php?t=1975140
Click to expand...
Click to collapse
Thank you for your input, but I already done that which resulted no success for me. The only way for me to overcome these black screens was by flashing:
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
This makes my device fully functional again but it just leaves me locked on ICS because when do the OTA updates, Flash JB ruu's or even flash custom JB roms I just get stuck on bootloops. I don't seem to get one JB version of android working on my device. Thats why I'm here seeking for help from geniuses like yourself. At the moment my device is back on android 4.0.4 but thats about it. It works perfectly fine on this version but I just can't update no matter what way I try I end up in a bootloop
so you have a stock recovery now? and receive ota notifications?
Yes
nogotaclue said:
so you have a stock recovery now? and receive ota notifications?
Click to expand...
Click to collapse
Yes I do and if I proceed with the update it will install without any problems but once it reboots it will be stuck in a bootloop. I ended up returning back to ICS and ignoring the update prompts when get told to update my software.
here you can see the update notification I recieve:
sN_iPower said:
Yes I do and if I proceed with the update it will install without any problems but once it reboots it will be stuck in a bootloop. I ended up returning back to ICS and ignoring the update prompts when get told to update my software.
here you can see the update notification I recieve:
Click to expand...
Click to collapse
you could try installing the update and if it bootloops go into the bootloader, vol down and power, and do a factory reset from there
alright
nogotaclue said:
you could try installing the update and if it bootloops go into the bootloader, vol down and power, and do a factory reset from there
Click to expand...
Click to collapse
alright im going to try that now, I will get back to you once I done it
nogotaclue said:
you could try installing the update and if it bootloops go into the bootloader, vol down and power, and do a factory reset from there
Click to expand...
Click to collapse
I just tried everything you told me, and I still ended up in a boot loop now I have to flash
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
to return back to ICS
sN_iPower said:
I just tried everything you told me, and I still ended up in a boot loop now I have to flash
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
to return back to ICS
Click to expand...
Click to collapse
I'm curious why you first chose an asian ruu for your first attempt and then got the european ruu. there is another ruu available but I need you to answer the above first.
I have to go to work now so I won't be able to answer you, there is another ruu available for version number, it's the 18th one down the list, release 974956 http://www.androidruu.com/?developer=Endeavor
sN_iPower said:
Thank you for your input, but I already done that which resulted no success for me. The only way for me to overcome these black screens was by flashing:
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed.exe
This makes my device fully functional again but it just leaves me locked on ICS because when do the OTA updates, Flash JB ruu's or even flash custom JB roms I just get stuck on bootloops. I don't seem to get one JB version of android working on my device. Thats why I'm here seeking for help from geniuses like yourself. At the moment my device is back on android 4.0.4 but thats about it. It works perfectly fine on this version but I just can't update no matter what way I try I end up in a bootloop
Click to expand...
Click to collapse
Lock you are S-OFF try fastboot writecid HTC__032 i think is something like this and see what will happend after applay update. Or try manualy update with this RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe after changeing the CID
The other way is manualy update your hboot to high version! Download from here firmware .zip for region 401 hboot1.31 and see what will happend
nogotaclue said:
I'm curious why you first chose an asian ruu for your first attempt and then got the european ruu. there is another ruu available but I need you to answer the above first.
I have to go to work now so I won't be able to answer you, there is another ruu available for version number, it's the 18th one down the list, release 974956 http://www.androidruu.com/?developer=Endeavor
Click to expand...
Click to collapse
I flashed the asian ruu first because my CID used to be HTC__621 which requires TW ruu's (I tried the JB one) also on the back of my device it says made in Taiwan. But after flashing the rom it didn't work and put me in a bootloop so I changed my CID to 11111111 and flashed the European ruu ( I tried the JB one) which also didn't work and ended up putting me in a bootloop. It was my friends father who then changed my CID to HTC__001 and flashed the European ICS ruu which worked flawlessly. Do think I should flash the ruu you recommended? because its a ICS ruu and I'm trying to get to JB. Anyway I really thank you for trying to help me, you are the only one who replied to me
Look at this image it shows you that my device was made in Taiwan
Thant said:
Lock you are S-OFF try fastboot writecid HTC__032 i think is something like this and see what will happend after applay update. Or try manualy update with this RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe after changeing the CID
The other way is manualy update your hboot to high version! Download from here firmware .zip for region 401 hboot1.31 and see what will happend
Click to expand...
Click to collapse
sN_iPower said:
I flashed the asian ruu first because my CID used to be HTC__621 which requires TW ruu's (I tried the JB one) also on the back of my device it says made in Taiwan. But after flashing the rom it didn't work and put me in a bootloop so I changed my CID to 11111111 and flashed the European ruu ( I tried the JB one) which also didn't work and ended up putting me in a bootloop. It was my friends father who then changed my CID to HTC__001 and flashed the European ICS ruu which worked flawlessly. Do think I should flash the ruu you recommended? because its a ICS ruu and I'm trying to get to JB. Anyway I really thank you for trying to help me, you are the only one who replied to me
Look at this image it shows you that my device was made in Taiwan
Click to expand...
Click to collapse
Actually @Thant replied also, try what he suggests at the bottom of his post to update your hboot, it's a different one to the one you tried, then try a higher ruu
I am wondering why everyone, OP and those attempting to assist, are assuming that what is apparently a prototype model of the One X would even be compatible with the updates.
If it is a prototype, regardless of how it identifies itself, it may have differences that simply prevent ANY of these software versions from operating.
I think that is one possibility the OP may have to be prepared for.
Tigerlight said:
I am wondering why everyone, OP and those attempting to assist, are assuming that what is apparently a prototype model of the One X would even be compatible with the updates.
If it is a prototype, regardless of how it identifies itself, it may have differences that simply prevent ANY of these software versions from operating.
I think that is one possibility the OP may have to be prepared for.
Click to expand...
Click to collapse
Maybe you are right he must to prepear and know the chance to broke his OneX is big because is prototype.
Tigerlight said:
I am wondering why everyone, OP and those attempting to assist, are assuming that what is apparently a prototype model of the One X would even be compatible with the updates.
If it is a prototype, regardless of how it identifies itself, it may have differences that simply prevent ANY of these software versions from operating.
I think that is one possibility the OP may have to be prepared for.
Click to expand...
Click to collapse
That had crossed my mind actually, but he is receiving ota notifications and the results he posted from "getvar all" indicate everything is as it should be, same model number even.
I have come across an early prototype before and the only 2 differences were the casing and slightly larger headphone jack socket. AFAIK the hardware was the same. Unfortunately, the one I saw wasn't working so I don't know what version of android it had
nogotaclue said:
I'm curious why you first chose an asian ruu for your first attempt and then got the european ruu. there is another ruu available but I need you to answer the above first.
I have to go to work now so I won't be able to answer you, there is another ruu available for version number, it's the 18th one down the list, release 974956 androidruu/?developer=Endeavor
Click to expand...
Click to collapse
Just to ask further: i dont see ruu for 4.19.707.3 (cid htc_044) on the site androidruu? I'm looking for it but yet to find, except for odexed/deodexed stock rom.
Sent from my HTC One X using xda app-developers app
xb2 said:
Just to ask further: i dont see ruu for 4.19.707.3 (cid htc_044) on the site androidruu? I'm looking for it but yet to find, except for odexed/deodexed stock rom.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
No more RUU only stock rom or nandroid. You never find that RUU because HTC never release this RUU.
Thant said:
No more RUU only stock rom or nandroid. You never find that RUU because HTC never release this RUU.
Click to expand...
Click to collapse
Ah, I see. Manual flashing stock rom is still ok anyway.
Thanks for the info, Thant
Sent from my HTC One X using xda app-developers app
Welcome... this had been discussed...
http://forum.xda-developers.com/showthread.php?t=2232063
I have Htc one x Prototype only ics no custom recovery no jb
hi, i have a htc one x protoype(engineer model) i have tried many times to install custom recovery and jb ruu but result is always same. bootloop and black screen. is someone can help. i know only xda members can help. so plz

[Q] HBOOT Downgrade to 3.18.0.0000

Hi There
After latest HTC OTA-Update was hboot updated to 3.19.0.0000.
I unlocked bootloader again and flashed cwm-recovery, after reboot WiFi didn't work, all Wigdets deleted and many more.
Then i tried to flash ruu from here, but all i get is the Mesage that hboot on my device is to new.
With hboot 3.18.0.0000 i could flash this ruu without problems.
Now my Questions :
Is there a way to downgrade hboot to 3.18.0.0000
If yes, could someone upload this version (or tell me how to extract from ruu)
Thanks and Greetings
...and Goldcard Method didn't work
May I please get the link for your RUU so that we can try and find the fix for your issue ? More details on the phone model and system update version will be helpful to understand the issues.
Sent from my HTC D816w using XDA Free mobile app
sorry and ok - here are more Informations :
The OTA-update from HTC i flashed is : OTA_A5_UL_K44_DESIRE_SENSE60_HTC_Europe_1.50.401.1-1.33.401.1_release_385376.zip
The RUU i tried for repairing my device is the .zip from that thread : http://forum.xda-developers.com/showthread.php?t=2763591
my device ist HTC Desire 816 (single SIM / Europe)
hope that helps
Greetings
I would first rest the phone twice from the settings, menu rather than from the recovery. Doing this way might erase your internal sd card. So backup and then reset to factory settings twice before filling in the details after first reset. This should fix your issue off the update has been successfully installed.
My phone is a dual SIM version and there appears to be no single SIM version RUUs available apart from the one you showed me. However there appears to be a backup floating around in the xda forum did the single SIM version.
The other possibility if the first one doesn't work is to install the kingsense 1.0 or 2.0 custom Rom that has the 3.18.0.0 radio and then flash the single SIM RUU. The custom Rom when installed on single SIM throw sms and GPS problems but that shouldn't effect you as you are going to install European RUU on top of it.
Let me please know how it goes if you wish to experiment. In anyways, don't forget to backup the current Rom before you experiment as that would be your savior when in trouble.
Sent from my HTC D816w using XDA Free mobile app
re
Thanks, but nothing helped.
I tried all you told.
Tested to flash after format /system /data & /cache.
The reason is hboot (bootloader), ruu doesn't flash, when hboot is newer than in ruu.
Other idea ?
Greetings
But when you flash kinghunkis Rom, your hboot version must change to 3.18..... For sure though. Then the RUU should work.
However, no one is successful so far in installing that RUU from what I gathered from the very minimal comments in that thread. It could be the issue with that RUU file as well. Otherwise try Chinese Unicom version RUU s for dual SIM and then try the European one that you may be after. I really can't experiment and let you know as I don't have the single SIM mobile. Sorry.
Sent from my HTC D816w using XDA Free mobile app
re
can't flash kinghunkis rom - it stucks in aroma after showing system requirements (possible reason - my hboot)
found a hboot for my device here : https://github.com/kmdm/ruuveal/issues
because flashing this is very dangerous - but i think i'll try out soon
when this hboot is not correct the required for my device or if damaged - it will destroy my device unrepairable
will tell you, when i have news
thanks and greetings
edit :
vbrsekhar said:
Otherwise try Chinese Unicom version RUU s for dual SIM
Click to expand...
Click to collapse
can you give me a link - i only found cwm-backups
sexmaschine said:
can't flash kinghunkis rom - it stucks in aroma after showing system requirements (possible reason - my hboot)
found a hboot for my device here : https://github.com/kmdm/ruuveal/issues
because flashing this is very dangerous - but i think i'll try out soon
when this hboot is not correct the required for my device or if damaged - it will destroy my device unrepairable
will tell you, when i have news
thanks and greetings
edit :
can you give me a link - i only found cwm-backups
Click to expand...
Click to collapse
Here are the links
http://translate.google.co.nz/trans...rev=/search?q=0p9cimg&espv=2&biw=1366&bih=600
http://translate.google.co.nz/trans...rev=/search?q=0p9cimg&espv=2&biw=1366&bih=600
There are many chinese websites that are currently offering RUU's. Just use google translate to understand what they are for?
Hit thanks if I helped you.
re
thanks for your links
i tried both ruu's but couldn't flash
possible reason could be the cid (goldcard-method didn't work)
all attempts to flash only hboot didn't work (not allowed or signature verification failed)
it seems, that i have to wait for a new ruu
greetings
Sorry to know that nothing is working for you? Anyways, how about the new RUU provided jacktackle in the general section ? Did you try it?
Sent from my HTC Desire 816 dual sim using XDA Free mobile app
vbrsekhar said:
how about the new RUU provided jacktackle
Click to expand...
Click to collapse
thanks but i didn't find a new ruu
the link to this ruu is from may
if i'm wrong give me link please
greetings
sexmaschine said:
thanks but i didn't find a new ruu
the link to this ruu is from may
if i'm wrong give me link please
greetings
Click to expand...
Click to collapse
Nope, here is the new link. http://forum.xda-developers.com/desire-816/general/desire-816n-middle-east-t2839093. I am currently on that rom and it will install the hboot, bootloaders and OS and openDSPs again. So hopefully this should work on your piece.
vbrsekhar said:
Nope, here is the new link. http://forum.xda-developers.com/desire-816/general/desire-816n-middle-east-t2839093
Click to expand...
Click to collapse
thanks - but the link in this thread is to the ruu uploaded by aki0306 (i tried yet)
greetings
downgrade boot
Hi
I want to downgrdae my Hboot to below 3.19 versions ,any suggestion please im having HTC desire 816 DWG version,fimrware downgrade H boot downgrade
Regards
Vinay
sexmaschine said:
thanks - but the link in this thread is to the ruu uploaded by aki0306 (i tried yet)
greetings
Click to expand...
Click to collapse
wondering if there is any solution to downgrade the hboot. Thanks!!

Stuck on HtC boot window stating "This build is for development only"

I recently got unlocked HTC one m9 from one friend and i thought its international version. When i boot it to bootloader mode it shows "Unlocked" and "S-Off". I installed TWRP recovery and tried to root phone to flash viper rom but now phone goes into bootloop with red text "This build is for development purposes only…”.
I am not sure what is going wrong and how do i get my phone back working. I appreciate if someone guide to get my phone working and root phone for custom rom.
Thank you in advance.
Please help, I am stuck here, tried googling to find some information but it didn't worked.
no nandroid backup?? either that or just flash Att RUU. You can find the RUU on htc.com with all the details and instructions needed. Youll be fully stock and after that just flash twrp and whatever you want
Roobwz said:
no nandroid backup?? either that or just flash Att RUU. You can find the RUU on htc.com with all the details and instructions needed. Youll be fully stock and after that just flash twrp and whatever you want
Click to expand...
Click to collapse
Thanks Roobwz.
I am downloading "RUU_HIMA_UL_M60_SENSE70_ATT_MR_Cingular_US_3.38.502.12.exe" file from HTC portal. Is it unlocked version or compatible with my unlocked phone. I am asking this because i dont want to brick my phone.
maddy_in65 said:
Thanks Roobwz.
I am downloading "RUU_HIMA_UL_M60_SENSE70_ATT_MR_Cingular_US_3.38.502.12.exe" file from HTC portal. Is it unlocked version or compatible with my unlocked phone. I am asking this because i dont want to brick my phone.
Click to expand...
Click to collapse
My bad man.. I think that you're firmware is the developer edition one. The firmware number must match the one you're flashing. (3.35.617.xx = 3.35.617.xx)
Either that or just change cid and mid and flash whatever you want. Check out the guides in the general section. They usually explain this better than I do
Skickat från min HTC One M9 via Tapatalk

Categories

Resources