hello,
I had this message, cant find matches cost for NT code mcc/mnc[], subset[],
I found by chance the NT-code section in settings, version info. by mistake I changed it from:
"0","FFF,FFFFFFFF,FFFFFFFF,FF" to "01","FFF,FFFFFFFF,FFFFFFFF,FF"
since then I can't modify this anymore beceause when i want to enter to the settings in hidden menu, my phone just freeze and terminate settings process.
Please help me, is ther any way to reset this NT-CODE with ADB?
thanks a lot!
Can you opened with file explorer in etc>cust>cust-path-mapping.cfg ?
Is it same with what's your need ?
Solved
I just upgraded new marshmawllow ROM, I was able to change my NT CODE easily via hidden menu and correct it to match EURO-XX.
majorak said:
I just upgraded new marshmawllow ROM, I was able to change my NT CODE easily via hidden menu and correct it to match EURO-XX.
Click to expand...
Click to collapse
Could u be so kind and write for me step by step what did u do??
dboo said:
Could u be so kind and write for me step by step what did u do??
Click to expand...
Click to collapse
+1
Related
Hi,
im'm trying to modify an extendedrom file (ms_.nbf) from the new rom 1.72 with eredit2003.
It ask me for the password, this is OK.
But I get this error message every time i try to open the rom after the password.
"Error Accessing Image Files"
I can modify the country and languages information but i don't seam to be able to acces the files on the rom.
any ideas????
yann said:
Hi,
im'm trying to modify an extendedrom file (ms_.nbf) from the new rom 1.72 with eredit2003.
It ask me for the password, this is OK.
But I get this error message every time i try to open the rom after the password.
"Error Accessing Image Files"
I can modify the country and languages information but i don't seam to be able to acces the files on the rom.
any ideas????
Click to expand...
Click to collapse
Sure, choose the Image file type. Don't use automatic detection...
this is a known issue of er2003edit. you can find the answer by browsing here a little bit around. but i'am going to tell you ;-)
when opening ms_.nbf the file type is set to "WM2003 Auto-Detect ROM (*.nbf). every time you leave this and open one of the *.nbf's you will get an error accessing the files even when your password is correct. all you have to do is change the file type to "WM2003 Extended ROM (ms_.nbf)" or to any of the other two options and you will no longer get that error.
regards
peter
oops someone must have been faster than me answering ... :-o
peter_altherr said:
oops someone must have been faster than me answering ... :-o
Click to expand...
Click to collapse
Short sentences win!
hey thanks for your both answers :lol: , it works!
wrong password
when i access it i get wrong password what is the password?
i think it depends on the rom version
For the 1.72 i use this password for ms_.nbf
password= 0x20040305
otherwise search on the forum
yay
thx alot
tpdenable.exe
do you know what tpdenable.exe and tpddisable.exe does thanksd
Re: tpdenable.exe
sesso900rr said:
do you know what tpdenable.exe and tpddisable.exe does thanksd
Click to expand...
Click to collapse
Use this EXEs if you want to disable/enable touches on display when you are doing hard-reset... Look at config.txt, there should be to rows:
EXEC:\\Extended_ROM\TPdisable.exe
...
EXEC:\\Extended_ROM\TPenable.exe
dose any1 know how to do this or know where to find it
i hav a htc evo flashed to metro
What part of it (specific information), and what have you tried?
well i already hav the driver installed and everything...when i open qpst n go to
efs explorer and select my phone n put in the spc
it show the file on my phone...
the only thing is that the nvm folder has a cross on it..i think it locked
lifemusic73 said:
well i already hav the driver installed and everything...when i open qpst n go to
efs explorer and select my phone n put in the spc
it show the file on my phone...
the only thing is that the nvm folder has a cross on it..i think it locked
Click to expand...
Click to collapse
Why exactly do you need it unlocked?
Just use QXDM and request your nv items after sending MSL..
i need 2 get the $sys file....can u show me how idk how use qxdm
Auto APN Activation
hi for all friend and thanks for Dungphp's For provide this file
many friend have problem with data connection on installed build, hope this method problem data connecton solve.with corect parameter.
im after many search in web and xda-dev... find and create installer and file for Add auto apn for all Build can use.
If no active Auto APN use of this method:
1-with root explorer delete file (/system/etc/customer/apns-conf.xml or /system/etc/apns-conf.xml) (If exist)
2-connect device with usb charge only (adb previously installed please)
3-down this and extract rar file and run install.bat
4-on settings > ireless & networks >mobile network >access Point Name > press menu key and press reset to default
5-enjoy
*** if mms not worked , please delete your apn and set manually its woked 100% ***
Very well, thank you for sharing
I just PM'd Dungphp about that cause i was having problems with certain sense builds allowing me to select the correct apn but no E/H in the notification area/status bar. Thanks.
essi_baba said:
Auto APN Activation
hi for all guys and thanks for Dungphp's For provide this file
many gays have problem...
Click to expand...
Click to collapse
bwuahahahahhhhaaaaa!
essi_baba said:
Auto APN Activation
hi for all guys and thanks for Dungphp's For provide this file
many gays have problem with data connection on installed build, hope this
Click to expand...
Click to collapse
dohclude said:
bwuahahahahhhhaaaaa!
Click to expand...
Click to collapse
Come on We all know he meant "guys" lol...
anyways awesome work OP keep up the work. XD
essi_baba said:
many gays have problem
Click to expand...
Click to collapse
hmmmm
edit comment
im sorry for type wrong word .
first post edited.
essi_baba said:
Auto APN Activation
hi for all friend and thanks for Dungphp's For provide this file
many friend have problem with data connection on installed build, hope this method problem data connecton solve.with corect parameter.
im after many search in web and xda-dev... find and create installer and file for Add auto apn for all Build can use.
If no active Auto APN use of this method:
1-with root explorer delete file (/system/etc/customer/apns-conf.xml or /system/etc/apns-conf.xml)
2-connect device with usb charge only (adb previously installed please)
3-down this and extract rar file and run install.bat
4-enjoy
Click to expand...
Click to collapse
u change it to friend now yea...hehehe
NWY, tried this but its not working for me,
can't find folder (sytem/etc/customer)..
so just skip it n proced with install.bat,check setting still no apn,
found out,apns-conf.xml was push to (system/etc/apns-conf.xml),then i delete system/etc/apns-conf.xml n reinstall it again,but still nothing on apn..
something wrong with i did??
install
oroo708 said:
u change it to friend now yea...hehehe
NWY, tried this but its not working for me,
can't find folder (sytem/etc/customer)..
so just skip it n proced with install.bat,check setting still no apn,
found out,apns-conf.xml was push to (system/etc/apns-conf.xml),then i delete system/etc/apns-conf.xml n reinstall it again,but still nothing on apn..
something wrong with i did??
Click to expand...
Click to collapse
If you only do :
1-with root explorer delete file (/system/etc/customer/apns-conf.xml or /system/etc/apns-conf.xml) (If exist)
2-connect device with usb charge only (adb previously installed please)
3-down this and extract rar file and run install.bat
4-on settings > wireless & networks >mobile network >access Point Name > press menu key and press reset to default
5-enjoy
essi_baba said:
If you only do :
4-on settings > ireless & networks >mobile network >access Point Name > press menu key and press reset to default
5-enjoy
Click to expand...
Click to collapse
done it but still nothing..
is it my rom or what??i'm using NDT ginger..
Works for me. Thankx.
One more thing. If you actually have root explorer, there is no need to use adb commands. Just replace the apns-conf.xml file in /system/etc/ and reset permissions as rw-r-r and reboot device.
Once rebooted, go to APN and press menu, then press Reset APN to default. Worked for me.
Hi !
Worked for me on Samsung Galaxy S GT-I9000 ICS ( TiramiSlim ROM ).
But Failed on Samsung Galaxy SII GT-I9100 MIUI ICS CM9 ( cMIUI ROM ).
Nowadays, thanks for this hudge list !!! )
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
I've installed the folders and tried to change the value for increase volume in audio/headset mode (increasing the value 124 to 160) but i don't notice any different
Evedammo said:
I've installed the folders and tried to change the value for increase volume in audio/headset mode (increasing the value 124 to 160) but i don't notice any different
Click to expand...
Click to collapse
Yes you right, just tested on the last firmware and no changes in volume level. On my previous tests I'm sure it worked but on what firmware version and as said before when worked my rom was heavily modified. Maybe it need something more to work, I will try to find why.
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
felixkruemel said:
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
Click to expand...
Click to collapse
Hi,
This thread was created on december 2016, you have to downgrade your phone to a Marshmallow firmware older than that.
I don't remember if it works on later M firmware but I'm sure that will not works on Nougat.
rrvuhpg said:
Hi,
This thread was created on december 2016, you have to downgrade your phone to a Marshmallow firmware older than that.
I don't remember if it works on later M firmware but I'm sure that will not works on Nougat.
Click to expand...
Click to collapse
Thanks for the answer despite the old thread.
Is there no way to access it in the Nougat firmware? What a bullsh*t Sony did with that then.
To downgrade the phone I would need to get the MM Firmware from anywhere. Do you have any link for it? Would reformatting and flashing it through TWRP be enough to get it to boot?
felixkruemel said:
Thanks for the answer despite the old thread.
Is there no way to access it in the Nougat firmware? What a bullsh*t Sony did with that then.
To downgrade the phone I would need to get the MM Firmware from anywhere. Do you have any link for it? Would reformatting and flashing it through TWRP be enough to get it to boot?
Click to expand...
Click to collapse
There is probably a way to acces it with Nougat but you have to find updated MTK apps.
To downgrade you have to download the firmware with Xperifirm inclued in Flashtool. Be careful with Flashtool, read/watch guides on how to flash firmware to avoid hard brick.
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
I'm sorry, I can't find where the file 'App' inside any of my 3 'System' folders are, can you please help?
felixkruemel said:
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
Click to expand...
Click to collapse
Did you find the system folder where an 'app' file is meant to be in and then placed them in there? If so then type in the code that was given in the original thread and the menu will appear
QUESTION: how did you find the 'system' folder where the 'app' folder is? Please help
For those who are still waiting for a fix for the update error and don't want to undergo the recovery process, I found a different solution, which doesn't need a recovery operation on the phone.
I tested it with success on my 1020 and another 925 which were stuck in the CU build .297.
Keep in mind that the parameters that I will use are specific to these phone models, so if you have a different one you need to find the parameters specific to your phone model.
This is an heuristic procedure, tested on a limited number of phones, so use it at your risk, keeping in mind that you could have problems or need to recover your phone loosing all your data, so do a proper backup before.
Let's start.
The problem appears because, during update phase, the oeminput.xml file becomes corrupted: as far as I know it happens only on some x20 models, and not for all the users.
Now we're going to rebuild it...
Go to the following link
https://msdn.microsoft.com/en-us/library/windows/hardware/dn756630(v=vs.85).aspx
Copy the content of example file oeminput.xml: i.e. copy the content of the framed zone after the phrase "The following example shows the contents of a sample ProductionOEMInput.xml file"
Paste in a .txt file which you'll rename and change extension so that it becomes oeminput.xml. Save it with notepad.
Now modify the file
at the node <SOC>{PROCESSOR_NAME}</SOC> modify {PROCESSOR_NAME} fake parameter in order to have the processor name of your phone: for the 920/925/1020 use QC8960
at the node <Resolution>480x800</Resolution> instead of 480x800 use the resolution of your phone: for the 920/925/1020 use 768x1280
in all the nodes related to language <Language>en-US</Language> use the language of your phone: I used for example it-IT because I have the phone in Italian language.
Save the file.
Now if you still don't have interop tools installed (but I think you should have if you arrived to CU with an x20 phone model) install it.
Launch interop tools and then click this device and enable full file system access. Reboot your phone, connect it to a pc with cable: you'll see more directories than usual, because you also unlocked system dirs: be careful not to delete or modify any dir apart from what you find in this guide or you'll risk to damage your phone. If you want to find your usual dirs (docs photos...etc), go to phone\Data\Users\Public. I advise you that after the procedure I couldn't deactivate full file system access, because it continues re-activating in interop tools, maybe there is a way: but you can live with this, because you can find the usual dirs in the path that I specified...
Now go to phone\windows\imageupdate, make a backup on pc of the current oeminput.xml and overwrite it with the new one.
At this point in the phone go to settings, update and then search for updates: you should find Fall Creators Update...
Good Luck!
p.s. I didn't extensively search on the forum if a similar guide has been already posted, in the case sorry for the duplication.
Thanks to Antonio who has actively participated in the realization of this guide
sigfrid696 said:
https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx
Click to expand...
Click to collapse
The link is wrong
Thank you!
I modified it, now it should be ok!
friend can you share the oeminput.xml file that you used?
NeoTriXz said:
friend can you share the oeminput.xml file that you used?
Click to expand...
Click to collapse
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
sigfrid696 said:
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
Click to expand...
Click to collapse
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
NeoTriXz said:
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
Click to expand...
Click to collapse
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
sigfrid696 said:
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
Click to expand...
Click to collapse
thank you friend, for your time, but I already solved it, well I had to perform a hard reset,
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
i could not able to copy paste it it shows you don't have permission
how i get permission
---------- Post added at 06:42 AM ---------- Previous post was at 06:22 AM ----------
it gives me this error
Yash Agarwal windows said:
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
Click to expand...
Click to collapse
I think you should use for 520
<SOC>QC8227</SOC>
<Resolution>480x800</Resolution>
If you receive an error when you try to overwrite oeminput.xml, it means that your phone has not been unlocked for full filesystem access. Please refer to the guide in order to enable full filesystem access
thanks
it worked for me
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
this error is get due to incorrect processor no or incorrect screen resolution
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
You can examine your oeminput.xml file and check if it is somehow not well-formed.
If that is the case you can use
<SOC>QC8926</SOC>
<Resolution>720x1280</Resolution>
Thanks for the reply guys.
I couldn't wait longer, so went with an reset. It updated fine after that.
Later came to know it was some server issue
how do you replace the xml file? it says copying but refuses to actually replace the file.
rancorx2 said:
how do you replace the xml file? it says copying but refuses to actually replace the file.
Click to expand...
Click to collapse
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Yash Agarwal windows said:
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Click to expand...
Click to collapse
how is complete unlock ??????????
I use interop tools
bloody_earth said:
how is complete unlock ??????????
I use interop tools
Click to expand...
Click to collapse
The error overwriting oeminput.xml happens when you haven't obtained full filesystem access.
In order to obtain full filesystem access:
Open Interop Tools, then this device, then Interop Unlock.
Check Full Filesysytem Access and restart your device.
Refer to this thread to download correct version of Interop Tools
https://forum.xda-developers.com/windows-10-mobile/tutorial-restore-glance-windows-10-t3540571
Let me know if you can solve the problem this way.