After installing the kernel and RR FlareM 15.6 My phone has become a brick.
Phone vibrate , if turned on , but the screen does not light . I postponed it.
Then the fun - every two or three minutes , he just let perezagruzhaetsya.Tochnee vibration occurs , and the screen did not light up. I tried to go to fastubut through volume buttons and locking - nothing.
I tried to connect to the power supply - LED indicating about charging or notifications do not light up .
Connected to a PC - PC on the second device found , but then again it is disconnected . This process is repeated .
I tried to flash through fastboot xFSTK-
Forums FW sewn once all comes to the OS partition , which contains droidboot, the process stops with an error
"Timeout to detect the device, make sure to charge up your phone before flash"
Disassemble , I measured the voltage of 3.84V , normal .
Please help me!
Sorry for my english , I'm from Russia , I write to you with the help of Google Translator
Related
Hey Guys ,
am new in the forum but i am so confused for 2 weeks ago as my xperia ION was bricked after installing a wrong rom
- no response from Power button or Power Button plus Vol+/Vol- buttons
-when connected to wall charger only red constant led ( no changes )
-i left the phone for couple days and after connecting to wall charged , a red led again and then sony logo appeared for couple of mins then constant red led again
i have tried all troubleshooting in this thread
http://forum.xda-developers.com/showthread.php?t=1849170
-note : one of my attempts of rubber band trick , a green light appeared but flash was unsuccessful coz device has been disconnected although i kept the phone connected
-i left the battery drained for more than 24 hrs
-charged the battery for more than 24 hrs again
-tried to flash *.tft rom many times with rubber band trick and wizout it ,,, but still red led consant
-i decided to try to disconnect the ribbon cable from motherboard .. and i did for 3 mins and then connected again , that suppose the mobile was reset and it is ready to be flashed , but after connecting to USB and holding vol down , still nothing , only red led
- now i am trying connect and disconnect ribbon cable , flashing once i connect it to motherboard and sometimes trying to charge again
-tried SONY pc companion and choose repair my phone and have downloaded all drivers even on PC Companion and Flashtool
-6 days of trying and nothing till now read all threads about xperia bricking and all steps done
Am really so frustrated and dont know what to do , is it dead ?
i ask for ur help to solve this problem and i hope i will find any solution !
At first I have no idea if this works, but switch of your phone. Then press the volume up button at the same time as you connect It to the pc. Then the blue light should appear. Then open a terminal and wipe your complete phone. Then download the original version from Android (I mean the one you saw as you got it for the first time) and the try to install this one.
I use Ubuntu. I really hope this helps you. But I am not sure if it will work. For more damage I am not responsible
Good luck
i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device
Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.
smogf said:
Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.
Click to expand...
Click to collapse
it seems like we stuck here
Yup.
Is there any windows/linux software for SONY devices like KDZ for LG phones? Which have an emergency flash option and, etc.???
/EDIT
So... I have read a little and I think (wchich I supposed before witout reading) boot is "dead".
I think it will be possibly to flash new boot with s1boot, but. I cannot find service manual for lt26i. Can anyone have it? Or can say where is the Test Point in this device?
makaom said:
i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device
Click to expand...
Click to collapse
Same situation, really need help from someone because its my only android phone right now.
Hello
3 days ago I did root my Z1 compact, everything was ok, I did backup TA etc.
I didn't unlock bootloader, just root by downgrading kernel and then restoring last.
Phone worked for 3 days, without any problems and then turned off while browsing web.
It seems like batery is drained but it's not. I tried charging it but doesn't help.
When connected to pc, pressing power on and vol -, newest flashtool shows:
08/021/2015 00:21:54 - INFO - Device connected with USB debugging off
08/021/2015 00:21:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
Windows Device menager detect device as:
USB Input Device HID
Flashtool shows:
08/031/2015 00:31:50 - INFO - List of connected devices (Device Id) :
08/031/2015 00:31:50 - INFO - - HID\VID_0FCE&PID_D19A\7&2ED8680C&0&0000 Driver installed : true
08/031/2015 00:31:50 - INFO - - USB\VID_0FCE&PID_D19A\6&6C1D71&0&3 Driver installed : true
08/031/2015 00:31:50 - INFO - List of ADB devices :
08/031/2015 00:31:50 - INFO - - none
08/031/2015 00:31:50 - INFO - List of fastboot devices :
08/031/2015 00:31:50 - INFO - - none
Any chance of unbrick ?
Just flash stock rom in flashtool. I think if this work.
It's was not detected propertly in flashtool and doesn't boot.
RESOLVED PROBLEM:
After 2 days of fail unbricking phone (via flashtool, pc companion and all other stuff) I decided to send phone on warranty, while I been packaging everythin I did push power button and phone start like it should. After boot battery was 56%.
Anyone can explain me what happend ?
I had feeling like rooting and mods caused data corruption and broke bootloader. I was wrong !
Maybe downgrading kernel to older version caused some battery calibration problems ?
I been charging phone for 15 hours and no success.
hEllo I got same problem but with different way , i hope somebody can help me, this is very bad for me, screen off and i cant go to recovery, can someone please tell me how to flash from flashtool without get error, because i see that with flashtool you can only flash if debug is active, and i cannot active !! because no screen ....help please
I've got the exact same problem.
Rooted 2 days ago.
While at work my battery went empty, so i charged it for about 2 hours when i got home. Red charge LED was on while charging. When pressing powerbutton nothing happened at all. Pulled it from the charger, pressed powerbutton agian and got no reaction what so ever. Pressed red "off" button and got 3 vibrations, then nothing. Now the charge LED doesent light up when plugged to wall charger. Cant enter fastboot og flashmode.
Very open to suggestions at this moment.
paua__ said:
I've got the exact same problem.
Rooted 2 days ago.
While at work my battery went empty, so i charged it for about 2 hours when i got home. Red charge LED was on while charging. When pressing powerbutton nothing happened at all. Pulled it from the charger, pressed powerbutton agian and got no reaction what so ever. Pressed red "off" button and got 3 vibrations, then nothing. Now the charge LED doesent light up when plugged to wall charger. Cant enter fastboot og flashmode.
Very open to suggestions at this moment.
Click to expand...
Click to collapse
Press Vol+ and Powerbutton for a few seconds (it is like taking the battery out of the device). The phone should vibrate three times.
Then try to restart it.
moonryder said:
Press Vol+ and Powerbutton for a few seconds (it is like taking the battery out of the device). The phone should vibrate three times.
Then try to restart it.
Click to expand...
Click to collapse
Tried all different button combos, then let it sit in the charger while i booted up my good old Samsung S1. After a total time of 4 hours plugged in the Z1c suddenly gave life and bootet indicated 1% battery and charging. Very strange considering the red LED was indicating a charge the two hours before it went in to "coma".
Sometimes it seems like these devices have moods and feelings, haha.
Bottom line: My device is now working and charging. Backing everything up now so i dont have to panic if it should occur again.
Hi, i couldnt find anything on google and youtube, so im here to ask you.
Every bricked situation has a USB Logo on screen or Android logo with ERROR message, BUT i have nothing on the screen. Just opening vibration and it keeps vibrate over and over again in 5-10 min. I dissambled my phone and disconnect battery from mainboard and re-connect it. It just keep vibrate when i re-connect it and it begins a loop. No led when charging, no adb connection (device not found error). Like i said, it keeps vibrate after 5-10 min last vibration. The time it vibrates again, adb finds my device but then it just lost connection.
HOW IT HAPPENED?
1. I was using official android 5 rom with root, I didnt get android 6 update
2. I tried to flash it via Recovery mode but it just didnt get in Recovery mode and it shows an ERROR message on screen. So i googled it and found a few solutions like wipe cache
3. I get in Recovery mode and tried to wipe cache again, but it stuck like 10 min so i forced close my phone. AAND no system i have.. It just didnt opening, ASUS logo with loading circle..
4. I flashed TWRP via ADB
5. so i tried to flash android 6 zip file via TWRP
6. it stucked, i waited over 10-20 min and i forced it to close(it stucked in "Splash screen installing", i though it must last like 1 min or 2 min maybe, its not the system its just opening animation)
7. NOW I HAVE A BRICKED PHONE WITH NO LED NO SCREEN JUST OPENING VIBRATION, cannot connect to adb, cannot get in recovery mode, nothing
Please give me some advices, im ready to try everything that can return my phone back.
English is not my native language, sorry for the huge grammer mistakes. I'm in a hurry and cant think about how can i make a sentence with perfect grammar.
up
This is the best guide : unbrick
Same PRoblem
if u get the solution please send it to me too at [email protected]
please update the links... i can't download the files i need.... thank you in advance...
This happened to me also . In my case i leaved my phone on charge (it was on low battery ) its keeps vibrating in 30 sec - 1 min interval , After some hours of this it finally booted to recovery (but i then rebooted bootloader then safe thing happens . Again after some hours it booted to recovery ) ,then i flashed stock ROM ,it failed but bootloader was back.
Hit Thanks if i helped.
Well, this happened with me, I needed open My phone and unplud batery cable and plug again. Easy to do.
same situation
I am facing the same issue at the moment.If you did fix it ,please reply with the solution or mail it to me at [email protected]
Thanks in advance
Hi,
My phone : ZE550ML
When I tried to update the TWRP recovery I installed .img file then everything collapsed.
My phone was only booting in bootloader, even if I chose normal boot.
I tried to install another .img file and since my phone doesn't want to do anything. No asus logo, no usb logo, no color nothing.
When I press power button nothing happen however how long I press even with volume button.
I charged it for a day long then I tried like a lot of times this procedure : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 .
(Surprisingly when I connect my phone to my computer sometimes the xfstk software recognize it)
But I always get : FW+OS download did not complete because of limit reconnecting to device attempt number reached.
Does someone have any idea ?