EXTENDED STOCK MARSHMALLOW KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR STOCK MARSHMALLOW ROMS ONLY
PLEASE MAKE A BACKUP FIRST
This kernel is for STOCK MARSHMALLOW ROMS ONLY !
I started a new thread because this kernel differs a lot from the previous,This one is more simple and minimalistic.
This Kernel aims to use the best and most stable feautures of stock motorola kernel and add useful features and optimizations,The idea is to keep it simple, stable and optimized.
The features Are :
Updated to lastest Moto 6.0 & CM13 Kernel Sources
Any Kernel Installer Script
Compiled Using Google Toolchain 4.8
Reclaimed RAM from loggers
Added AUTO_SMP HOTPLUG
Added BRICKED HOTPLUG
Added MSM HOTPLUG
Added INTELLI HOTPLUG
Added State Notifier Driver
Added IntelliThermal V2
Added Updated & Optimized Ondemand Governor with touch boost
Added Smartmax Governor
Added YankActive Governor
Added Impulse Governor
Added Zzmove Governor
Added BioShock Governor
Added SIO , ZEN & VR I/O Schedulers
Added Adreno Idler
Added Dynamic Management Of Dirty Page Writebacks & Cache Presure
Added GPU OC
Added Adaptative LMK
Update ZRAM from 4.X Kernel
Enabled Power Eficcient Worqueues
Lots Of Kernel Optimizations
Permissive SElinux
Decreased Voltage Values For More Battery
Enabled Kernel NEON Mode
Added ARCH_POWER & Disable Gentle Fair Sleepers On/Off
Added Francisco Franco Sound Mod
Added MultiRom Support
Lots Of Tweaks and Optimizations
Lots Of Updates and Fixes
DOWNLOAD
EXTENDED STOCK MM KERNEL V-5
Use the app kernel adiutor to tweak the kernel !
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
About DT2W & S2W FEATURES:
Check with terminal emultator the following lines:
su
cat /proc/cmdline
If you see : mdss_dsi_mot_inx_720p_video_v0 , It should work
If you see : mdss_dsi_mot_jdi_720p_video_v0 or mdss_dsi_mot_jdi_720p_video_v1
Then it doesnt gonna work,Sorry!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU WANNA GO BACK TO STOCK KERNEL FLASH THIS
STOCK MM KERNEL
XDA:DevDB Information
EXTENDED MARSHMALLOW STOCK KERNEL, Kernel for the Moto G 2014
Contributors
attack11, Cyanogenmod Team, faux123 , myfluxi , savoca ,franciscofranco , Alberto97, luca020400, LuK1337,Hurtsky
Source Code: https://github.com/attack11/Attacked-Kernel
Kernel Special Features: STOCK MARSHMALLOW KERNEL WITH SOME EXTRA FEATURES
Version Information
Status: Stable
Current Stable Version: EXTENDED-V5
Stable Release Date: 2016-07-05
Current Beta Version: EXTENDED-V5
Created 2016-03-22
Last Updated 2016-07-05
Reserved
21-03
First Release
22-03
Second Release
Fixed Screen Rotation
30-03
Build from scratch
Added Some missing modules
Updates from CM
Some minor Fixes...
11-04
Updates From CM Sources
Added Smartmax Governor
Added YankActive Governor
Added Impulse Governor
Added Zzmove Governor
Added Dynamic Management Of Dirty Page Writebacks
Added SIO , ZEN & VR I/O Schedulers
Added Conservative GPU Governor
Updates to Simple_Ondemand GPU Governor
05-07
Test Version
Updates From CM Sources
Removed DT2W & S2W for now.
Added BRICKED HOTPLUG
Added MSM HOTPLUG
Added INTELLI HOTPLUG
Added State Notifier Driver
Added Adreno Idler
Added Dynamic Management Of Cache Presure
Added GPU OC
Added Adaptative LMK
Update ZRAM from 4.X Kernel
A LOT of changes...
Hi all this is a beta release,please MAKE A BACKUP FIRST, and give a try , ive tested and seems to work fine,but since I use cm13 as my daily driver i need that you report the bugs you find to try to solve them,Thanks!
You are god mate
Halatk7 said:
You are god mate
Click to expand...
Click to collapse
Thanks for your support! I Hope people dont get confused with this and cm13 kernel thread :silly:
@DaveImagery didnt you want one for stock? Here you go.
Just a quick noob question. Can I flash this over other custom kernels or do I have to reflash the rom and then flash this? Thanks
Rex Skeletos said:
Just a quick noob question. Can I flash this over other custom kernels or do I have to reflash the rom and then flash this? Thanks
Click to expand...
Click to collapse
This kernel is for stock 6.0 rom ONLY, and this is the only kernel avalible right now for stock 6.0 too, what other custom kernels are you talking about?
Rex Skeletos said:
Just a quick noob question. Can I flash this over other custom kernels or do I have to reflash the rom and then flash this? Thanks
Click to expand...
Click to collapse
Actually this kernel is for stock moto ROM. If you are using any custom ROM like CM or others you cannot flash this. Instead you can flash EXTENDED kernel meant for cm/aosp ROMs. That is also provided by Attack 11...
attack11 said:
Compiled Using Google Toolchaing 4.9
Click to expand...
Click to collapse
A little typo.
Thank you for the kernel. It seems like it comes pre-tweaked. That's awesome!
Trying it with Radium Redefined 3 test 3
How do I get DT2W working? I turn it on, but it doesn't seem to work :/
Halatk7 said:
@DaveImagery didnt you want one for stock? Here you go.
Click to expand...
Click to collapse
Yes, and thank you for the heads up!
---------- Post added at 05:54 AM ---------- Previous post was at 05:52 AM ----------
Many thanks attack11! Can't wait to try
Screen rotation doesn't seem to work for me. Weird.
NotFatMan said:
Screen rotation doesn't seem to work for me. Weird.
Click to expand...
Click to collapse
same here
Sent from my XT1068 using Tapatalk
NotFatMan said:
A little typo.
Thank you for the kernel. It seems like it comes pre-tweaked. That's awesome!
Trying it with Radium Redefined 3 test 3
How do I get DT2W working? I turn it on, but it doesn't seem to work :/
Click to expand...
Click to collapse
Hi Maybe your device touchscreen doesnt support it,Check with terminal emultator the following lines:
su
cat /proc/cmdline
If you see : mdss_dsi_mot_inx_720p_video_v0 , It should work
If you see : mdss_dsi_mot_jdi_720p_video_v0 or mdss_dsi_mot_jdi_720p_video_v1
Then it doesnt gonna work,Sorry , I will add this to the OP
NotFatMan said:
Screen rotation doesn't seem to work for me. Weird.
Click to expand...
Click to collapse
Ajju^ said:
same here
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
Yes notice that,I will upload a new build today trying to fix it, If you experiment more bugs please report ! :good:
finally it comes. Good work.
i'd like to try it, but where can I find the stock marshmallow kernel when I need it?
Or do I have stock rom completely re-flash?
please add an overclock option, thanks!
Wolfskin01 said:
finally it comes. Good work.
i'd like to try it, but where can I find the stock marshmallow kernel when I need it?
Or do I have stock rom completely re-flash?
please add an overclock option, thanks!
Click to expand...
Click to collapse
Hi I recomend you to backup system and boot.img partitions with TWRP ,Since the installation of this kernel changes boot.img and system files , and give a try keep in mind that this is a BETA release, I will try to make a flashable .zip to uninstall this kernel and install stock kernel and modules just in case you wanna go back :good:
About Overclock, Sorry but no , Ive tried and its just placebo effect ...
Okay, too bad. but thanks that you tested it.
attack11 said:
About Overclock, Sorry but no , Ive tried and its just placebo effect ...
Click to expand...
Click to collapse
I guess that answers my question. Was curious to see any before and after Antutu scores.
That's fine, I'm excited just to be getting DT2W/S2W.
Many thanks attack11!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you attack11 for this Kernel! I'll try the new Version asap with radium redifined 6.0 test 3[emoji106]
Gesendet von meinem Moto G 2014 mit Tapatalk
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: This kernel is for Moto G 2014 only(TITAN). Don't flash it on other devices
Custom Features:
- Updated to latest CM12.1 Sources
- Bumped to 3.4.109
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- ARM v7 Optimizations
- Replaced Qcom's hotplug binary with msm_mpdecision (aka bricked hotplug, better battery life + performance)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- DoubleTap2Wake & Sweep2Wake
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Adreno Idler Algorithm
- State Notifier Driver by Neobuddy89
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You need ROM's default kernel before flashing this. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.Pls reboot after tweaking the kernel.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
DOWNLOADS:
AndroidFileHost
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor or Synapse
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store
Credits : (In no specific order,pls pm me if i missed someone)
faux123
Cl3Kener
savoca
Anas Karbila
pinkflozd
YoshiShaPow
DC07
luca020400
And more
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2014
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: R1
Beta Release Date: 2015-04-24
Created 2015-04-24
Last Updated 2015-09-30
Mine!
One More!!
Good to see this awesome kernel on our Titan!!
Anas Karbila said:
Good to see this awesome kernel on our Titan!!
Click to expand...
Click to collapse
Oh lol Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Brilliant! Gonna flash it right away!!!
Can this be used on Stock based roms ?
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
Impulse or yankactive
zakee94 said:
Can this be used on Stock based roms ?
Click to expand...
Click to collapse
NO
Will it work on Stock based 5.0.2? More specific TP? Thanks
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
seriously where you too lazy to read 1 post above yours -_-
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
No it won't work. It's for CM12 and AOSP roms only
zakee94 said:
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
Click to expand...
Click to collapse
Already updated the OP.
I'm sorry ... ten minutes ago... I'm working and I didn't realize to refresh page. My bad.
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
I recommend smartmax governor for that
smitharro said:
View attachment 3279459
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Click to expand...
Click to collapse
All set up now! I really was on the lookout for a kernel like this! Hope it is as stable as it promises to be.
Sent from my XT1068 using Tapatalk.
im testing this right now with reccommended settings, post my benchmark scores later
scores 18608
If you guys have other settings to reach the full potential of the hardware with great battery life please post :angel:
Works Fine and fast....
CPU underclocking is THE BEST
I have a doubt : Under the Hotplug[CPU] Should the MPDecision be Enabled for the kernel addon MSM MPDecision Hotplug to work? ALSO should i Disable faux's Intelliplug?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Llama Sweet For AOSP
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
I just started Developement (since early 2015) i have a lot to learn but i want to share that i already learn. The main goal of this kernel is performance and battery life as well as user friendliness.
Rules
1. if you have any issue do some research before posting
2. I want Respect, No troll and limited off-topic
Let's talk about that big baby
FEATURES
-Built with ubertc 6.0 linaro toolchain
- Based on Boeffla Works
- Powersuspend
- Modified MPdecision and Intelliplug from faux
- Intellithermal
- Intelliactive and IntelliMM from Faux
- FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
- More governor
- Sound Control
- Frandom
- USB Fast Charge (ON/OFF Toggle)
- New LZ4 Compressor
- Dynamic FSync
- Kcal driver
- Simple GPU Algorithm
- Kexec Hardboot
- Working dt2w
- What you ask !
For kernel tuning i recommand you to flash UKM and use Synapse on google play store
INSTRUCTION
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip corresponding to your variant
* Reboot
Download
LP Download
Thanks
I would like to thanks every developer that help me RenderBroken, REV3NT3CH, Lord Boeffla , Dorimanx, Neobuddy89, Savoca, Faux123, and Many More!
And of course every user that enjoy this kernel and every donators
XDA:DevDB Information
[KERNEL][5.1][CAF] Llama Sweet kernel , ROM for the LG G2
Contributors
genesixxbf3
Source Code: https://github.com/LlamaOpenSourceProject/msm8974_caf_G2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CAF
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2015-05-31
Last Updated 2015-06-13
Reserved
Personal setting (soon as i know how to do i'll make them as default) :
CPU MAX FREQ 1497 MHz
CPU MULTICORE POWER SAVING aggressive
CPU GOV Nightmare
ENABLE Intellithermal (IMPORTANT)
CPU VOLT -20
IO Read-Ahead size 2048 KB and Scheduler ZEN
GPU GOV simple_ondemand
Sound +3 for Headset boost and +2 for Speaker boost
POWER SUSPEND kernel mode
FAST CHARGE enable
WIFI SCAN interval 150 sec
Reserved
Credit for the logo to @electrikjesus
Habemus Llama Kernel!
Any reason behind using the max at 1497 ?
dharani1234 said:
Any reason behind using the max at 1497 ?
Click to expand...
Click to collapse
for more battery life
genesixxbf3 said:
for more battery life
Click to expand...
Click to collapse
K .. that's what I thought .. but I feel that browsing slows down when you set it to that low. I use 1958 MHz
Thanks for the quick response .
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Understand, thank you for your answer and your kernel.
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
make sure they are CAF (ok for bliss and remix )
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Great logs and information.
Thank you for your work, just asking if it works with thishttp://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
Yes it should work with http://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
D803 will not be until there is source code Lollipop for him?
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
---------- Post added at 05:53 PM ---------- Previous post was at 05:47 PM ----------
energizer5680 said:
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
Click to expand...
Click to collapse
Caf means that the kernel is on lollipop source, lollipop modem bootstack and so.
As far as I know blisspop 3.3 is not caf cause it's on jb boot stack
vitök said:
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
Click to expand...
Click to collapse
yes it's compatible
you can use both
Great kernel, only a single bug in synapse using the posted UKM:
Under Misc, the default power suspend mode is set to User Mode. Below it is a bar named "Power Suspend State". Changing its value to anything but 0 causes com.af.synapse.utils.RunCommandFailedException: echo: write error: Invalid argument
Using RR5.1.1 CAF on a d802.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES :
Compiled with Hyper Toolchain 4.9 @frap129
Based on LA.BF.1.1.3_rb1.13 kernel source
Upstream to Linux 3.4.112
AutoSMP & MSM Hotplug
yankdemand, yankactive, intellidemand, intelliactive, intellimm, smartmax, smartmax_eps, alucard, zzmoove governors
bfq, sio, sioplus, zen, vr, fiops I/O Schedulers
MSM Thermal by @show-p1984
GPU OC to 590 MHz & UC to 100 MHz
Adreno Idler 1.1 by @arter97 & Simple GPU Algorithm by @faux123
Faux Sound 3.6 @faux123
KCAL support by @savoca
USB Force Fast Charge
Adaptive LMK
ZRAM Tweaks (510 mb)
DT2W by @thewisenerd
Dynamic Fsync
Neon Accelerated XOR Implementation
Enabled all TCP Congestion Control
AnyKernel 2 kernel script support
DOWNLOAD LINK :
PhanTom-v7.zip
PhanTom-v7-MM.zip
PhanTom-v7-MIUI.zip
Old Build CM
Old Build MIUI
PHANTOM CHANGELOG :
Changelog can be found here
HOW TO INSTALL :
Boot Into Recovery
Flash Stock Kernel/Boot.img (If coming from other Custom Kernel)
Flash Kernel
Wipe Cache and Dalvik (optional)
Reboot to System.
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum, @onano & @Luffy.d - for the latest stable kernel source
@neobuddy89 @RolanDroid @hurtsky @franciscofranco @faux123
@savoca @Alucard24 @myfluxi @Cl3Kener
thanx to all for sources
Huge Thanks to my tester for testing kernel :
@Anonymous_1S
@mohdmujahidansari526
@domino2115
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R7
Stable Release Date: 2016-06-14
Created 2015-11-21
Last Updated 2016-07-04
To Enable D2W
Native D2W :
There are three ways by which i enable/disable Native D2W
1. By using Terminal Emulator
2. By using Root Explorer
3. By editing dt2w file in init.d or by Kernel Adiutor
Terminal Emulator :
to enable
echo 1 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
to disable
echo 0 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
Root Explorer
Go to sys/bus/i2c/drivers/ft5x06_i2c/5-0038
Open " d2w_switch" file as text editor
then just changed : 1 to enable and 0 to disable
Beta Version
PhanTom-v8-beta4.zip
PhanTom-v8-MIUI-beta4.zip
Old beta versions are here
After flashing the kernel, let the device first cool down and then start using it normally.
I am on cm11 so going to try
Tried bro working best at that time give you some report after using a long time.?
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
emojhoken said:
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
Click to expand...
Click to collapse
What problem did you face?
Did you wipe cache & dalvik.
Fix the gdrive link. It's set private.
Jayanttyagi said:
Fix the gdrive link. It's set private.
Click to expand...
Click to collapse
New link is uploading wait for the release.
With more tuneup in kernel.
Good work
---------- Post added at 07:06 AM ---------- Previous post was at 06:49 AM ----------
hemantbeast said:
PhanTom Kernel
A Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
PHANTOM CHANGE LOG:
R1
Latest armani-kk sources
Build with UBERTC 4.9.4 20151101
Alucard Hotplug
{Tried other hotplug, but need more fixes till then Alucard is best }
Added alucard, yankactive & bioshock governor
USB Fast Charging
CPU OC to 1.7GHz
GPU OC to 590MHz & UC 100MHz
KCAL support
Faux Sound 3.2
Kexec [Multi Rom Support]
Added more TCP Congestion
IMP Note: I have test the kernel in CM12.1 & CM13.0 ROM, working fine for me & not tested in CM11. So please test by yourself and report if it is working or not. :fingers-crossed:
DOWNLOAD LINK:
PhanTom_Armani_21112015.zip
Mirror
HOW TO INSTALL:
Boot into TWRP Recovery
Flash the Kernel zip file
Wipe Cache
Wipe Dalvik Cache
Reboot to System
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum & @Luffy.d - for the latest stable kernel source
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Stable Release Date: 2015-11-21
Created 2015-11-21
Last Updated 2015-11-21
Click to expand...
Click to collapse
Please make a support for mi stock rom
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
New Kernel link upload with more tuneup.
- Added Bricked Hotplug and Abyssplugv2 governor.
shrikant716 said:
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
Click to expand...
Click to collapse
I think it is ROM problem. Since it is in Alpha build.
is there a new build? dev host link not available
agriculture said:
Please make a support for mi stock rom
Click to expand...
Click to collapse
Will work on it soon!!
Fallen_Knight said:
is there a new build? dev host link not available
Click to expand...
Click to collapse
Yes, there's a new build with updated the old one. Dev-host link is working. Check it again.
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Fallen_Knight said:
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Click to expand...
Click to collapse
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
hemantbeast said:
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
Click to expand...
Click to collapse
Can u add double tap to wake and double tap to sleep in this kernel.
khurshid_258 said:
Can u add double tap to wake and double tap to sleep in this kernel.
Click to expand...
Click to collapse
Will add it on next build, if it is stable..
hemantbeast said:
Will add it on next build, if it is stable..
Click to expand...
Click to collapse
please make two seperate version of doubletaptowake option. Because it is the buggiest thing on this earth to strike balance in this world. Well most of the times devs remain busy in striking balance between pocket mode, tap to wake..... Just for sake of simplicity make two versions. It will be best.
[KERNEL][4.4.2] 🌟STOCK🌟 v.3.7 UBERT gcc 7.0.0 [email protected] CPU Underclock KCAL2
Kernel is for Stock Rom v.4.4.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device is GT-I9301i
WARNING:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Because:
They returned to KitKat, too many bugs in lollipop and gave
that there was a decent kernel and me have changed...
Thanks to network sources.
Features:
Toolchain arm-eabi-gcc (GCC) 4.9.x-sabermod 20150828 (prerelease)
Add KCAL - Advanced color control for Qualcomm MDSS 8226
Full -O3 build (# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set)
CONFIG_KERNEL_MODE_NEON
CONFIG_CRYPTO_SHA1_ARM_NEON
CONFIG_CRYPTO_SHA256_ARM
CONFIG_CRYPTO_SHA512_ARM_NEON
CONFIG_CRYPTO_AES_ARM_BS
CONFIG_XOR_BLOCKS
CONFIG_FRANDOM
CONFIG_CRYPTO_ABLK_HELPER
CONFIG_HAS_MACH_MEMUTILS
CONFIG_FORCE_FAST_CHARGE
CONFIG_PROC_DEVICETREE
CONFIG_INTELLI_PLUG
CONFIG_POWERSUSPEND
CONFIG_LAZYPLUG
CONFIG_ALLOW_CPU_ALIGNMENT
CONFIG_SOUND_CONTROL_HAX_3_GPL
CONFIG_INTELLI_THERMAL_V2
CONFIG_IKCONFIG_PROC
CONFIG_UID_CPUTIME
CONFIG_ALSA_TO_H2W
CONFIG_HOB_SHARED_RAM
CONFIG_DROPBOX
CONFIG_USR_RESET_WARNING
CONFIG_IOSCHED_FIOPS
CONFIG_IOSCHED_SIO
CONFIG_IOSCHED_BFQ
CONFIG_IOSCHED_SIOPLUS
CONFIG_IOSCHED_TRIPNDROID
CONFIG_IOSCHED_ZEN
CONFIG_IOSCHED_VR
Compress kernel in XZ ( minor size )
Add ADRENO_IDLER work with MSM_ADRENO_TZ
Add GPU governors SIMPLE_ONDEMAND
CPU_BOOST
Add many governors for CPU
My band I9301IXXUANF2 I9301iXCUAOJ1
and Rom 4.4.2 KOT49H I9301IXXUANL1UPDATES v2.1:
Kernel Version 2.1
Fix date clock reset ( update RTC driver )
update INTELLI_PLUG V4.0 Faux123 <[email protected]>
update SOUND_CONTROL V3.6 Faux123 <[email protected]>
update ip4 and ip6 sources
Added Screenshots jpeg
update "radio-iris" "Qualcomm FM Radio Transceiver" "Driver for Qualcomm FM Radio Transceiver "
UPDATES v2.2:
Kernel Version 2.2
add overclock to 1593 Mhz
update driver video
UPDATES v2.3:
Kernel Version 2.3
Fix Adreno Idler and add PowerSuspend
Add Conservative GPU governor
Add CYAN CPU governor
Use Android device as USB keyboard/mouse (USB Keyboard APK)
add PowerSuspend to WLAN
codel: use Newton method instead of sqrt() and divides
Update iosched
ext4: Add support for FIDTRIM, a best-effort ioctl for deep discard trim
mach-msm: disable kernel-side mpdecision
int_sqrt: Improve 3x faster integer sqrt.
update driver video
Cortex-A7 optimizations
UPDATES v2.4:
Kernel Version 2.4
Change all Governors CPU Mike20017 says So... Most dont work correctly.
Add DYNAMIC_FSYNC dynamic file sync control
Add DriveDroid DriveDroid thread
Remove Conservative GPU governor
Implement lcd_notify
UPDATES v2.5:
Kernel Version 2.5
Insert Fix-WiFi FirmWare in Kernel zip
Update ZZMOOVE CPU governor
Remove SLIM CPU governor
Implement WQ_POWER_EFFICIENT_DEFAULT
Implement QUICK_WAKEUP
Fix POWERSUSPEND in wifi wlan and touchscreen
Fix other....
UPDATES v3.0:
Kernel Version 3.0
Change fastcharge driver
Change Toolchain Dorimanx-LG-G2-D802-Kernel
Change to KCAL V2 mdss_mdp_kcal_ctrl.c
UPDATES v3.1:
Kernel Version 3.1
Power Suspend settable.
UPDATES v3.3:
Kernel Version 3.3
Rewrite all CPU Governor
Governor ZZMOOVE fix profile
Add MSM_HOTPLUG
Update Powersuspend v1.7
Classic Toolchain arm-cortex_a7-linux-gnueabihf-linaro_4.9.4-2015.06
Initram KERNEL in GZIP
Fix reset on insert usb charge
More Stable
UPDATES v3.5:
Kernel Version 3.4
Fix Charge Offline
[email protected]
CPU Underclock
KCAL2
AddGovernor conservative_sm
Kernel v.3.5
build Linaro gcc 5.2.1
update zRam max 4 device (compression lz4)
UPDATES v3.7:
New v3.7 (experimental)
kernel_CM11.0_s3ve3g_v3.7-u700
Add Zcache swap (the first kernel in the world)
New Toolchain...
UBERT gcc version 7.0.0 20160421 (experimental) GRAPHITE
Add CRYPTO LZ4 (forgot)
Add Async Fsync from HTC Kernels
Update Dynamic file sync control
Optimize more FULL -03
v.3.7 UBERT gcc version 7.0.0 20160421 (experimental) GRAPHITE
Download: kernel_CM11.0_s3ve3g_v3.7-u700_zram.zip
Download: kernel_CM11.0_s3ve3g_v3.7-u700_zswap.zip
Download: kernel_CM11.0_s3ve3g_v3.7-u700_zcache.zip
v.3.5 Linaro gcc 5.2.1 Fix Charge Offline [email protected] CPU Underclock KCAL2
Download: kernel_CM11.0_June-2016_s3ve3g_v3.5_zram.zip
Download: kernel_CM11.0_June-2016_s3ve3g_v3.5-zswap.zip
If wifi not work flash this in recovery mode:
WiFi Fix : WiFi.Fix.GT-I9301I.Stock4.4.2.zip Now is in Kernel zip
If wifi disconnect flash new WiFi Fix in recovery mode
WiFi Fix : WiFi-fix Galaxy S3 Neo 4.4.2.zip
I use Kernel Adiutor for Setup Kernel
Apk : Kernel Adiutor 0.9.9.3
Copy zip to SDcard and flash in recovery:
Thank you very much I'm planning to use cm 11
And now a new kernel came
I was about to flash cm11 too haha this is awesome I will test it and give feedback
Thank you, I am testing it.
---------- Post added at 04:22 PM ---------- Previous post was at 03:47 PM ----------
German_Malik said:
Thank you, I am testing it.
Click to expand...
Click to collapse
Not working, stucks on the Samsung Screen...
Exceptional. Thank you!!!
German_Malik said:
Thank you, I am testing it.
---------- Post added at 04:22 PM ---------- Previous post was at 03:47 PM ----------
Not working, stucks on the Samsung Screen...
Click to expand...
Click to collapse
What version of rom uses?
My version band is I9301IXXUANF2
Rom 4.4.2 KOT49H I9301IXXUANL1
I will test the kelmel later
Renix63 said:
What version of rom uses?
My version band is I9301IXXUANF2
Rom 4.4.2 KOT49H I9301IXXUANL1
Click to expand...
Click to collapse
The newest version by rox (CM 11). I am using the i301l Neo.
German_Malik said:
The newest version by rox (CM 11). I am using the i301l Neo.
Click to expand...
Click to collapse
Ok this kernel is for stock rom... sorry...
Renix63 said:
Ok this kernel is for stock rom... sorry...
Click to expand...
Click to collapse
Why CM11 in the title?
German_Malik said:
Why CM11 in the title?
Click to expand...
Click to collapse
My error :silly:
Renix63 said:
My error :silly:
Click to expand...
Click to collapse
Okay, and thank you for you awesome work.
German_Malik said:
Okay, and thank you for you awesome work.
Click to expand...
Click to collapse
Thank at you. Use the Stock Rom because NFC works.
@Renix63 I installed your kernel and the phone flies, it is fast and fluid, in a nutshell is perfect !!!!!
I can not use certain features, I installed kernel Adiutor and on the 'menu (various controls / mode sospendione energy)
I find four items
autosleep
user space
lCD panel
hibrid
what are they?
many thanks for this kernel.
edit:
I noticed bugs, restarting the phone to me is dated in 1970 and it marks until 01: 00, even if I remove this option now and restarting automatic changes back, the second being the most important one I put the phone on charge and even if the battery icon is undercharge and turns on the red LED charging the phone I remained at 36%, so do not know if the phone actually post office but the percentage of power do not update or no charge at all.
My wifi is not working on neostockx and stockmod roms. What rom are u using renix?
pablonik79 said:
@Renix63 I installed your kernel and the phone flies, it is fast and fluid, in a nutshell is perfect !!!!!
I can not use certain features, I installed kernel Adiutor and on the 'menu (various controls / mode sospendione energy)
I find four items
autosleep
user space
lCD panel
hibrid
what are they?
many thanks for this kernel.
edit:
I noticed bugs, restarting the phone to me is dated in 1970 and it marks until 01: 00, even if I remove this option now and restarting automatic changes back, the second being the most important one I put the phone on charge and even if the battery icon is undercharge and turns on the red LED charging the phone I remained at 36%, so do not know if the phone actually post office but the percentage of power do not update or no charge at all.
Click to expand...
Click to collapse
Hoops bug in RTC...
I hope to fix it
And charge battery...:crying:
Fix RTC driver
prepare to post new kernel...
Mike20017 said:
My wifi is not working on neostockx and stockmod roms. What rom are u using renix?
Click to expand...
Click to collapse
I do not remember is a mix of roms
Version 2.1
Fix date clock reset ( update RTC driver )
update INTELLI_PLUG V4.0 Faux123 <[email protected]>
update SOUND_CONTROL V3.6 Faux123 <[email protected]>
update ip4 and ip6 sources
I used the neostockx rom with this kernel but my wifi is not working.
Mike20017 said:
I used the neostockx rom with this kernel but my wifi is not working.
Click to expand...
Click to collapse
Strange... my wi-fi is working and connected fine.
No idea for this
Added Screenshots jpeg