Stuck at HTC logo screen - Desire 816 Q&A, Help & Troubleshooting

Well, there was a tiny update that came up after I had downloaded Loloipop update long time ago.. It was something about security, so I couldn't care less since it is not a big deal, today my friends told me about Marshmello update and said I had to download this tiny update, so I get the Marshemllo update... I went back to stock recovery, downloaded and installed that update succesfully, then my mobile rebooted and stuck on black blank screen, I kept restarting my mobile by holding power button + volume up, but still I get same screen.. Can you help me with that? I did the steps you asked so you know about my mobile information..
C:\Users\Ahmed\Desktop\HTC\fastboot>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.13.3230.27.0303
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.34.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: a5_dug
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C70000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.022s
C:\Users\Ahmed\Desktop\HTC\fastboot>

Can someone help?

Just to confirm, is your phone stuck on HTC boot logo or it's a black screen?
Try holding power and volume up, when it restarts let go of the volume up and hold volume down to try to boot into the bootloader

KabbozZ said:
Can someone help?
Click to expand...
Click to collapse
Also please erase your serial number and your IMEI's for security purposes. Your security specifically. You can leave the rest though.

Gibz97 said:
Just to confirm, is your phone stuck on HTC boot logo or it's a black screen?
Try holding power and volume up, when it restarts let go of the volume up and hold volume down to try to boot into the bootloader
Click to expand...
Click to collapse
Well, when I shutdown my device and open it back, it gets stuck on HTC logo screen, then I hold power button+Volume up button, it restarts, goes to htc logo screen then a black blank screen appears..
I can get normally to bootloader by holding volume down after it restarts and I did factory reset through bootloader, but it didn't help still..
So basically, I have normal access to the bootloader normally..

If the screen stays black after holding power + volume up, there's something wrong with your recovery. This usually results in a blank black screen with backlight still on.
To get your phone booting again, you'll need to download a different recovery image.

KabbozZ said:
Well, there was a tiny update that came up after I had downloaded Loloipop update long time ago.. It was something about security, so I couldn't care less since it is not a big deal, today my friends told me about Marshmello update and said I had to download this tiny update, so I get the Marshemllo update... I went back to stock recovery, downloaded and installed that update succesfully, then my mobile rebooted and stuck on black blank screen, I kept restarting my mobile by holding power button + volume up, but still I get same screen.. Can you help me with that? I did the steps you asked so you know about my mobile information..
C:\Users\Ahmed\Desktop\HTC\fastboot>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.13.3230.27.0303
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.34.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: a5_dug
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C70000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.022s
C:\Users\Ahmed\Desktop\HTC\fastboot>
Click to expand...
Click to collapse
Hey mate, have you had the problem solved?! If so please do care to share it with us.
Thanks in advance

Related

[Q] HTC Desire hangs at bootscreen after RUU flash

Hi Guys,
Hope someone can help me with following issue. I have an HTC Desire on which I have flashed a new ROM. The RUU update went well (device was in fastboot mode), and after it was finished the device rebooted, but hanged at the HTC Logo. Below is a copy of my Getvar comond in fastboot ans this is the ROM I used:
ruu_proto_u_ics_40a_htc_asia_wwe_1.14.707.1_radio_10.18.40.05u_1.09.45.201_release_284720_signed
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.93.0001
(bootloader) version-baseband: 5.09.05.30_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: 2.13.707.1
(bootloader) serialno: SH0CBPL06561
(bootloader) imei: 355302049853618
(bootloader) product: bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-365c78d6
(bootloader) hbootpreupdate: 11
all: Done!
finished. total time: 0.016s
C:\Users\Alienanihilator\Desktop\Roms\HTC Roms\HTC One X\HTC_fastboot_files>
Any help is apreciated!
Greetz
@Rno
Edit: nevermind, see below...
DrSmartphone said:
Hi Guys,
Hope someone can help me with following issue. I have an HTC Desire on which I have flashed a new ROM. The RUU update went well (device was in fastboot mode), and after it was finished the device rebooted, but hanged at the HTC Logo. Below is a copy of my Getvar comond in fastboot ans this is the ROM I used:
ruu_proto_u_ics_40a_htc_asia_wwe_1.14.707.1_radio_10.18.40.05u_1.09.45.201_release_284720_signed
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.73.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.707.3
(bootloader) serialno: MB249W133151
(bootloader) imei: 353426057946840
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: low
(bootloader) battery-voltage: 3432mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Any help is apreciated!
Greetz
@Rno
Click to expand...
Click to collapse
Going by your bootloader info, you posted in wrong thread. "Endeavoru" Im sure is the One X/S??
correct bootloader info
jmcclue said:
Going by your bootloader info, you posted in wrong thread. "Endeavoru" Im sure is the One X/S??
Click to expand...
Click to collapse
This is the correct one:
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.93.0001
(bootloader) version-baseband: 5.09.05.30_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: 2.13.707.1
(bootloader) serialno: SH0CBPL06561
(bootloader) imei: 355302049853618
(bootloader) product: bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-365c78d6
(bootloader) hbootpreupdate: 11
all: Done!
finished. total time: 0.016s
If you are sure that the phone is indeed an htc desire, give this ruu a try: http://www.htcdev.com/process/legal_download/152
model
Quite sure as its written under the battery Desire A8181, thanks for the tip going to try that one, lets see:fingers-crossed:
rom updated
Rom update went well, but, still stuck at the HTC logo:crying:
update
Update: now i am at the "quitly brilliant" logo, but stuck there for another few minutes. See what happens, can it take this long for a first time boot after RUU install? Taking now over 10 minutes.
DrSmartphone said:
Update: now i am at the "quitly brilliant" logo, but stuck there for another few minutes. See what happens, can it take this long for a first time boot after RUU install? Taking now over 10 minutes.
Click to expand...
Click to collapse
Give it a few more minutes. If its still stuck try this (I'm not joking):
Remove the battery and put the phone in the freezer for ten minutes. After the ten minutes have passed, take the phone out of the freezer and reinsert the battery. Immediately after, turn it on and see if it boots.
Sent using xda-developers app
Before I put it in the freezer i got so far as attached pics. But it was frozen, couldnt swipe to unlock. After I tried the "fridge" method. still it hangs up. Maybe its time to declare this little puppy dead.... Spend already 3 days on its revivial hehe.
updated pics
DrSmartphone said:
Before I put it in the freezer i got so far as attached pics. But it was frozen, couldnt swipe to unlock. After I tried the "fridge" method. still it hangs up. Maybe its time to declare this little puppy dead.... Spend already 3 days on its revivial hehe.
Click to expand...
Click to collapse
https://www.dropbox.com/s/6cm3mez8rsci6b0/CAM00075.jpg
https://www.dropbox.com/s/ekiwtcyq9p0ebm1/CAM00074.jpg

[Q] Phone can't boot for 5+ minutes everytime flashing ROM

Currently running:
Android Revolution HD 21.1
Firmware: 3.28.401.7
Recovery. TWRP 2.8.1.0
Bootloader unlocked
S-OFF
Super CID
Hi guys I need some help as I feel like I'm at risk of bricking my phone everytime I flash a ROM. Just got my M8 recently and everytime I flash a ROM, it is very difficult to turn the phone back on after flashing. This has happened for both ARHD 21.0 and 21.1 for me, they are the only ROM'S I have tried since having this phone. But after the ROM finishes flashing and I select "finish now", the phone shows a split second of the TWRP lock screen and then turns off. From there it is very difficult to turn on the phone no matter what I try. I have tried holding power button for more than 30 seconds, holding power button+down, and power button+up and still no luck. However when I plug the charger in, the red charging light turns on but nothing comes up on screen still. I have to constantly attempt to hold/press the power button for over 5 minutes for the phone to turn on, and once it's turned on its fine to turn back on even when I restart/turn it off. This has happened EVERY time I flash a ROM and I need help as I really feel like I bricked my phone every time.
Does anyone know how to fix this problem? Thank you.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
oblivianz said:
Currently running:
Android Revolution HD 21.1
Firmware: 3.28.401.7
Recovery. TWRP 2.8.1.0
Bootloader unlocked
S-OFF
Super CID
Hi guys I need some help as I feel like I'm at risk of bricking my phone everytime I flash a ROM. Just got my M8 recently and everytime I flash a ROM, it is very difficult to turn the phone back on after flashing. This has happened for both ARHD 21.0 and 21.1 for me, they are the only ROM'S I have tried since having this phone. But after the ROM finishes flashing and I select "finish now", the phone shows a split second of the TWRP lock screen and then turns off. From there it is very difficult to turn on the phone no matter what I try. I have tried holding power button for more than 30 seconds, holding power button+down, and power button+up and still no luck. However when I plug the charger in, the red charging light turns on but nothing comes up on screen still. I have to constantly attempt to hold/press the power button for over 5 minutes for the phone to turn on, and once it's turned on its fine to turn back on even when I restart/turn it off. This has happened EVERY time I flash a ROM and I need help as I really feel like I bricked my phone every time.
Does anyone know how to fix this problem? Thank you.
Click to expand...
Click to collapse
Can you check TWRP and disable screen timeout? Then reflash Rom and see if that fixes the problem
What are hboot and radio number? Either from hboot screen, or adb getvar all.
stathis95194 said:
Can you check TWRP and disable screen timeout? Then reflash Rom and see if that fixes the problem
Click to expand...
Click to collapse
Ok, I'm going to try that and let you know when ARHD 22.0 is released because I try to avoid flashing ROM's as much as possible now. Not a nice feeling when it happens..
redpoint73 said:
What are hboot and radio number? Either from hboot screen, or adb getvar all.
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
oblivianz said:
Ok, I'm going to try that and let you know when ARHD 22.0 is released because I try to avoid flashing ROM's as much as possible now. Not a nice feeling when it happens..
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Please edit your post and remove imei and serialno. Posting them in public forums is a big no no
Please delete your IMEI and serial number from the above post. I only asked for hboot and radio number, but forget that folks here are sometimes over-achievers!
Moderator Information,
IMEI and Serial number have been removed. Please do not post this online. It is personal information.
Many thanks,
Stephen
Sorry about that guys, I didn't know. Thank you for removing.
oblivianz said:
Currently running:
Android Revolution HD 21.1
Firmware: 3.28.401.7
Recovery. TWRP 2.8.1.0
Bootloader unlocked
S-OFF
Super CID
Hi guys I need some help as I feel like I'm at risk of bricking my phone everytime I flash a ROM. Just got my M8 recently and everytime I flash a ROM, it is very difficult to turn the phone back on after flashing. This has happened for both ARHD 21.0 and 21.1 for me, they are the only ROM'S I have tried since having this phone. But after the ROM finishes flashing and I select "finish now", the phone shows a split second of the TWRP lock screen and then turns off. From there it is very difficult to turn on the phone no matter what I try. I have tried holding power button for more than 30 seconds, holding power button+down, and power button+up and still no luck.
Click to expand...
Click to collapse
Try turning off the screen timeout in twrp. That's a common problem with roms that use the aroma installer
Edit: sorry, I overlooked someone else who had the same answer

Model id scrambled, backlight off, can't flash anything.

Hello, you glorious bastards
Trying to revive customer's One X, CID 032 after the original system started to crash and factory reset didn't help.
After tons of failed RUU, rom and recovery flashes (only cwm 5.8.4.0 worked because of the touch-problem) I was able to flash Revolution JB Deodexed 4.18.401.3 through recovery.
For the first time ever it went past "quietly brilliant" logo and booted to a certain point where it even showed a force-close error. I was happy with that At least it's something.
This is where things took the turn for the worst:
> Bootloop
> Remembered to flash boot.img :angel:
> boot.img flash crashed/freezed!!! (either because it got LOCKED after flashing rom or the battery was on the edge of the acceptable %, i'm not sure)
> rebooted to fastboot, SCREEN FLICKERED once (showing black-white stripes) and the backlight was dead after that and still is.
> tried unlocking again with the Unlock_code.bin but unlock token check failed
> checked "getvar all" and saw this (model id used to be PJ46100) :
Code:
C:\AndSDK\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.2
(bootloader) serialno: [B]123456789012[/B] <<<------------------
(bootloader) imei: xxxxxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: ▲©”į▼"kĻ├I╗↑ <<<----------------------
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3770mV
(bootloader) devpower: 28
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.861s
Now i can't flash anything because it's locked and model id is jibberish (also serial).
Can't read any info on screen because backlight is off or broken (can only enter fastboot by pushing buttons by memory)
I might have forgotten some details because I was tired and had been working on it non-stop for 6 hours.
You guys have any ideas?
Could the hardware itself be faulty? Because nothing has gone the way it should.
Can a failed flash cause blacklight faliure?
P.S. My first post in many years and have to say... not even million thanks-buttons wouldn't show how amazing you developers all are. Keep it up.
texic said:
Hello, you glorious bastards
Trying to revive customer's One X, CID 032 after the original system started to crash and factory reset didn't help.
After tons of failed RUU, rom and recovery flashes (only cwm 5.8.4.0 worked because of the touch-problem) I was able to flash Revolution JB Deodexed 4.18.401.3 through recovery.
For the first time ever it went past "quietly brilliant" logo and booted to a certain point where it even showed a force-close error. I was happy with that At least it's something.
This is where things took the turn for the worst:
> Bootloop
> Remembered to flash boot.img :angel:
> boot.img flash crashed/freezed!!! (either because it got LOCKED after flashing rom or the battery was on the edge of the acceptable %, i'm not sure)
> rebooted to fastboot, SCREEN FLICKERED once (showing black-white stripes) and the backlight was dead after that and still is.
> tried unlocking again with the Unlock_code.bin but unlock token check failed
> checked "getvar all" and saw this (model id used to be PJ46100) :
Code:
C:\AndSDK\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.2
(bootloader) serialno: [B]123456789012[/B] <<<------------------
(bootloader) imei: xxxxxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: ▲©”į▼"kĻ├I╗↑ <<<----------------------
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3770mV
(bootloader) devpower: 28
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.861s
Now i can't flash anything because it's locked and model id is jibberish (also serial).
Can't read any info on screen because backlight is off or broken (can only enter fastboot by pushing buttons by memory)
I might have forgotten some details because I was tired and had been working on it non-stop for 6 hours.
You guys have any ideas?
Could the hardware itself be faulty? Because nothing has gone the way it should.
Can a failed flash cause blacklight faliure?
P.S. My first post in many years and have to say... not even million thanks-buttons wouldn't show how amazing you developers all are. Keep it up.
Click to expand...
Click to collapse
This look like Black screen of dead
Thant said:
This look like Black screen of dead
Click to expand...
Click to collapse
I don't think so. The symptoms are totally different.
When it still had factory installed system it just started crashing and rebooting. The display, backlight and all the touchy functions worked perfectly.
Now the display itself works, I can see the boot logo and fastboot menu under certain angle and light condition (it's just hard to see the text because it's so small)
Only the backlight has "died"... along with the model ID.
Any other ideas?

[SOLVED][help][modified][sense home unfortunately stopped]

Hello, Greetings XDA members
I have HTC M8x, unlocked bootloader, S-ON,rooted, stock rom, software status was official.
the phone and keys were in the same pocket and i guess volume up + power button might have been pressedd while the phone was in pocket.
the phone vibrated and restarted and was stuck on HTC screen with the famous red warning saying this build is for developement purpose..............and took 1 minute to boot, when the phone booted a screen came saying "ANDROID IS STARTING, OPTIMIZING APPS"
normally when this screen comes the total apps to optimize are 176 , but this time it was only 43, finally the phone booted completely. Now all i have is lockscreen and notification bar i cannot use the phone as it pop comes on a blank screen saying
1-"Sense home stopped unfortunately do you want to send this report to HTC"
2- .the process.com.google.gapps has stopped
3-exchange service stopped
i booted the phone into bootlader the software status has changed to modified.
i had made a nandroid after rooting the phone but the backup being of 7 gb i shifted it to SDcard.
i booted the phone to TWRP recovery to restore the backup but TWRP is unable to find it, it shows nothing when i select sdcard at recover option in twrp( i think its in sdcard so)
and now my phone takes lot of time to reboot. as everytime i restart my phone it gets stuck a while at htc screen with red warning message.
i cannot transfer the backup to twrp internal storage as i do not get the pop to select file transfer when i connect my phone to my laptop
i do have a RUU of my phone matching my region. I will have to relock my phone to flash the ruu
can i unlock it back i do have the unlock.bin file.
what shall i do.
PS: any way to remove the red warning i just dont want to wait so long for my phone to boot
below is my phones getvar all
version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.709.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT53LWM01208
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
HTC backup solved the problem.
it restored the apps and later downloaded sense home playstore

stuck at bootloop and recovery shuts off

Hi all,
My HTC One M8 is rooted with TWRP. I was having issues with it, so I decided to wipe it to see if that would help . However, it's now stuck in a bootloop, and when i try to get to recovery it turns off, or get a computer to recognize it.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.531.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA44NWM02554
(bootloader) imei: 352628060928852
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
ayouuuuub said:
Hi all,
My HTC One M8 is rooted with TWRP. I was having issues with it, so I decided to wipe it to see if that would help . However, it's now stuck in a bootloop, and when i try to get to recovery it turns off, or get a computer to recognize it.
Click to expand...
Click to collapse
What problems were you having exactly (before you wiped)?
What partitions did you wipe?
The phone is not turning on, it boot for a 2-3 sec that the logo shows up then it turned off, i've tried Volume UP+Volume Down+power method , Volume UP+power,but that's not working,also i tried factory reset ,then flashed RUU, the phone turned on for few minutes, while i was plugging it then it turned off and back to the previous problem. I think it's a battery problem but i don't know cuz it showed that is charged +90% and still not turning on.
It does look like battery issue. And I believe you wiped the OS so it can't boot when connected to charger.
Had same experience on my M7, only can switch on when plugged to charger (I didn't wipe anything so OS was still there and able to boot).
ckpv5 said:
It does look like battery issue. And I believe you wiped the OS so it can't boot when connected to charger.
Had same experience on my M7, only can switch on when plugged to charger (I didn't wipe anything so OS was still there and able to boot).
Click to expand...
Click to collapse
I installed a RUU from HTC's website and it took a few minutes to turn off and not switching on again

Categories

Resources