Htc one m8 problems getting identifier token - One (M8) Q&A, Help & Troubleshooting

My phone disconnects after putting it to fastboot mode, and can not be found by computer, so after writing "fastboot oem get_identifier_token" all I get is <waiting for device>. It's noticible while in adb. What should I do next?

Related

Mac OS X Fastboot Mode <Waiting for Device>

Hi, I am trying to Re-Lock my Galaxy Nexus GSM version, I've downloaded the SDK files (adb-mac and fastboot-mac) and all the image files and I am trying to execute the following commands:
adb reboot bootloader
fastboot flash bootloader bootloader-toro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-toro-i515.ek02.img
fastboot reboot-bootloader
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
fastboot reboot-bootloader
fastboot -w update image-mysid-icl53f.zip
fastboot reboot-bootloader
fastboot oem lock
With the phone in normal mode I connect the USB cable to the computer, start Terminal windows and run the first command, "./adb-mac reboot bootloader" and the phone will boot into the "Fastboot Mode", then I try to execute "./fastboot-mac devices" to make sure the phone is connected and properly detected and I get nothing.
If I try to execute "./fastboot-mac flash bootloader bootloader-toro-primekk15.img" I get the message <waiting for device> and it will stay there forever.
Do you know what might be the problem ?, is there other method to do this ?, go back to Stock ROM and Re-Lock the device ?, thanks
You must also install the Samsung usb drivers. I have no idea how to do this in mac. A simple search will help you tho.

[Q] "fastboot -i 0x1949 getvar product" stuck on waiting for device

I have a Kindle Fire 2nd edition that I want to put CM on. Part of the instructions is to run this in fastboot mode: fastboot -i 0x1949 getvar product
So I ran it in the command prompt, and it says "waiting for device". I then shut down the KF and plugged it in to the computer. The display shows it being in Fastboot mode, but the command prompt is still saying "waiting for device". It's supposed to display the product type.
When I go to the Device Manager, under Other Devices, it says 'Otter2-Prod-04'.
What am I doing wrong?
You didn't install the drivers. Install them.

[Q] Fastboot mode not working/Unable to unloack bootloader.

Plz help me out guyz.
I have HTC Desire 816G dual sim with MTK6582 chipset. The problem I'm facing is that when I connect my phone in ON state to my PC and run the command "adb devices" it shows my device, but when I get into fastboot mode and connect my phone to pc and run the same command my device is not shown, and also when I enter the command "fastboot oem get_identifier_token" (as I am trying to unlock my bootloader) it says
FAILED: (remote : unknown command)
Finisher. time taken 0.005s
Don't know what's the problem.
Someone please help me .
I'll be very gratefull.

writing 'recovery'... FAILED (remote:partition 'recovery' not support flash)

Hi Techies,
i am no coder but i have a decent knowledge about android, i need help in something i couldnt find anywhere, here is my situation...
I own a HTC Desire 616h
My phone keeps on restarting with HTC logo flashing every few seconds
my phone is stable only in Fastboot mode
i tried SP flash tool but it doest do anything in fastboot(i think SP Tool doestn work in fastboot mode)
i tried Fastboot tool it shows my device in fastboot mode, i was able to unloack the bootloader with “fastboot oem unlock” command
however, when i try anything else like getting the code with "fastboot oem get_identifier_token" for HTCDev or any other command it shows only three dots ...
i dont understand anything at this point to what to do
my phone shows My HTC in device manger in fastboot mode
what can i do? can anybody help

HTC desire 816 get_identifier_token error

I just wanted to flash my htc desire 816 with the custom recovery twrp.to do that I tried to unlock the bootloader.i just enterd the fastboot mode and gave the command in cmd "fastboot oem get_identifier_token".But it keeps showing "error remote unknown command".The only things fastboot is responding when using the command "fastboot devices".For every other commands it's showing the above mentioned error.pls help me to resolve this.

Categories

Resources