Related
I tried to update my ginger running phone to ICS. The phone had official rom, it was untouched.
After official update vie Kies will not boot. It gets stuck at at&t boot animation.
Its possible to boot to download mode, so I played a bit with odin. I tried to root it and instal cwm to by possible to flash it.
Odin wrote success all the time, but nothing changed at my phone. I cant even boot to cwm.
Please help
dudanko said:
I tried to update my ginger running phone to ICS. The phone had official rom, it was untouched.
After official update vie Kies will not boot. It gets stuck at at&t boot animation.
Its possible to boot to download mode, so I played a bit with odin. I tried to root it and instal cwm to by possible to flash it.
Odin wrote success all the time, but nothing changed at my phone. I cant even boot to cwm.
Please help
Click to expand...
Click to collapse
maybe anyone could reupload you a version of this oneclick update - the link in the thread seems to be down
http://forum.xda-developers.com/showthread.php?t=1831561&highlight=oneclick
Roeni said:
maybe anyone could reupload you a version of this oneclick update - the link in the thread seems to be down
http://forum.xda-developers.com/showthread.php?t=1831561&highlight=oneclick
Click to expand...
Click to collapse
It would be nice, but I cant even start cwm
dudanko said:
It would be nice, but I cant even start cwm
Click to expand...
Click to collapse
I tried root according to this :
http://forum.xda-developers.com/showthread.php?t=1378082
and cwm with this:
http://forum.xda-developers.com/showthread.php?t=2007198
Odin wrote success after all operations
When I press both volume keys and power, nothing happens.
This is NOT DEV related...
Thread reported
From the moderator
Odin back to stock from download mode........ use the already rooted image if it's still around then go from there........
thread moved
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
muiacir said:
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
Click to expand...
Click to collapse
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
The recovery and root works, you must unchecked the auto reboot by odin, after flashing boot manuly with the 3 combo keys into the revovery andflash the xxxroot.zip.
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
gr8nole said:
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Click to expand...
Click to collapse
Brian D said:
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Click to expand...
Click to collapse
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
muiacir said:
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
Click to expand...
Click to collapse
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Brian D said:
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Click to expand...
Click to collapse
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
muiacir said:
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
Click to expand...
Click to collapse
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
gr8nole said:
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
Click to expand...
Click to collapse
My fault ..... i mean volume up but still stock recovery
muiacir said:
My fault ..... i mean volume up but still stock recovery
Click to expand...
Click to collapse
I'm not sure wath you are doing wrong.
Here are a link to a vid from Tomsgt , " How to install TWRP and root", when you are following the step you can root you Tab.
http://m.youtube.com/watch?feature=youtu.be&v=BDShwBHRjUE
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
BigNoobee said:
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
Click to expand...
Click to collapse
Odin is used in download mode. Are you trying to use it in recovery mode?
Larry2999 said:
Odin is used in download mode. Are you trying to use it in recovery mode?
Click to expand...
Click to collapse
Trying to root the phone. Doesn't the phone need to be in recovery mode to root it?
BigNoobee said:
Trying to root the phone. Doesn't the phone need to be in recovery mode to root it?
Click to expand...
Click to collapse
Depending on your phone model and what method you are trying to use to root, you may need to flash SuperSU via recovery. This process does not, however, start in recovery. It starts with flashing custom recovery via Odin and then manually booting to recovery to flash the SuperSU zip. To flash a custom recovery via Odin, you would need to boot into download mode. There are other methods, of course, to root that do not require either download or recovery modes. What's the model of your phone and what firmware version are you on?
Have you tried flashing a pre-rooted ROM? You have an i747 or i747m?
Larry2999 said:
Depending on your phone model and what method you are trying to use to root, you may need to flash SuperSU via recovery. This process does not, however, start in recovery. It starts with flashing custom recovery via Odin and then manually booting to recovery to flash the SuperSU zip. To flash a custom recovery via Odin, you would need to boot into download mode. There are other methods, of course, to root that do not require either download or recovery modes. What's the model of your phone and what firmware version are you on?
Click to expand...
Click to collapse
The phone is a SGH-I747M ver. 4.3
I tried rooting based on a number of videos as to easily follow the process.
audit13 said:
Have you tried flashing a pre-rooted ROM? You have an i747 or i747m?
Click to expand...
Click to collapse
I have a i747m, The situation is that odin only opens the com port when the phone is in operating mode.
BigNoobee said:
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
Click to expand...
Click to collapse
I should have stated my goal. My goal is to put kitkat on my phone. After talking to my provider (petro mobility) on the Rogers network no upgrades are going to be provided and at the very least I need an s4 or better s5 to run kitkat. Also this information I was given is NOT official but only the opinion of an employee"s personal opinion, having worked for the company for some time. The phone is not supported in any way by petro mobility but is only running on the Rogers network. If any upgrades are made it will be by Rogers. Rogers will not say anything because I am not a Rogers customer.
To flash a Kit Kat ROM, you need to have a custom recovery installed on your phone.
You can load Philz Touch via Odin.You can flash the latest tar Philz d2lte from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Boot into download mode, put the Philz tar file in the PDA section of Odin, check nothing except auto reboot and F.Reset Time.
Boot into recovery mode and you will see that Phil has replaced the stock recovery.
You can copy a custom rom to your external micro SD card and flash it.
If you just want a rooted stock ROM, look here: http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=34317218
Warning: doing all of these things can soft or hard brick your phone. Make sure you read and understand everything before proceeding. The method I described worked my i747m with 4.1.2 and another i747m with 4.3. I cannot guarantee it will work for you.
audit13 said:
To flash a Kit Kat ROM, you need to have a custom recovery installed on your phone.
You can load Philz Touch via Odin.You can flash the latest tar Philz d2lte from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Boot into download mode, put the Philz tar file in the PDA section of Odin, check nothing except auto reboot and F.Reset Time.
Boot into recovery mode and you will see that Phil has replaced the stock recovery.
You can copy a custom rom to your external micro SD card and flash it.
If you just want a rooted stock ROM, look here: http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=34317218
Warning: doing all of these things can soft or hard brick your phone. Make sure you read and understand everything before proceeding. The method I described worked my i747m with 4.1.2 and another i747m with 4.3. I cannot guarantee it will work for you.
Click to expand...
Click to collapse
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
BigNoobee said:
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
Click to expand...
Click to collapse
Now you have custom recovery, you can flash a Kit-Kat based custom ROM. There is, of course, a difference between a Kit-Kat based custom ROM and official Kit-Kat 4.4. We have information and I'm sure they are reliable enough, that Kit-Kat 4.4 will be rolled out for Samsung GS III and all its variants including the i747U/M. The expectation has, however, been on for some time and no one really knows when and if. If you are using a custom ROM, you will not be able to get OTA updates for official firmware if the official version is rolled out but manual updates will still be possible, thanks to the development community.
BigNoobee said:
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
Click to expand...
Click to collapse
I don't personally use ROM Manager as I find it redundant. Now that you have Philz which can flash pretty much any KK ROM, you can just stick with using Philz to flash.
I like the Validus ROM on the i747m. I find it works well and has great battery life and performance.
BTW, you do not need to root in order to flash a custom ROM.
I RECENTLY UPDATED MY LG G3 TO LOLLIPOP 5.0 AND I CANT OPEN SUPER SU, I TRIED DOING ABOUT 5 DIFFERENT THINGS TO UNROOT MY PHONE... WHEN I DO THE PROCESS WHERE I PLUG USB INTO COMPUTER AND HOLD THE VOLUME DOWN WHILE PLUGGING IT IN, THE PHONE WONT DOWNLOAD IT STAYS AT 0%. .. THE LG FLASH TOOL I CANT DOWNLOAD. IT KEEPS BRINGING UP ERRORS.. I TRIED DOWNLOADING FROM 3 DIFFERENT PLACES... I JUST WANT TO GET BACK TO MY STOCK PHONE....
After trying all of that to remove the issue when launching SuperSU "There is no SU BINARY installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device!", it still isn't resolved.
Any help?
THANK YOU IN ADVANCE..
nmc_Dane said:
I RECENTLY UPDATED MY LG G3 TO LOLLIPOP 5.0 AND I CANT OPEN SUPER SU, I TRIED DOING ABOUT 5 DIFFERENT THINGS TO UNROOT MY PHONE... WHEN I DO THE PROCESS WHERE I PLUG USB INTO COMPUTER AND HOLD THE VOLUME DOWN WHILE PLUGGING IT IN, THE PHONE WONT DOWNLOAD IT STAYS AT 0%. .. THE LG FLASH TOOL I CANT DOWNLOAD. IT KEEPS BRINGING UP ERRORS.. I TRIED DOWNLOADING FROM 3 DIFFERENT PLACES... I JUST WANT TO GET BACK TO MY STOCK PHONE....
After trying all of that to remove the issue when launching SuperSU "There is no SU BINARY installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device!", it still isn't resolved.
Any help?
THANK YOU IN ADVANCE..
Click to expand...
Click to collapse
Well there is a lot of ways to restore back to stock just follow this thread. Best method is the KDZ or flash a restore zip via TWRP
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Flash SuperSU via twrp
vel0city said:
Well there is a lot of ways to restore back to stock just follow this thread. Best method is the KDZ or flash a restore zip via TWRP
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Click to expand...
Click to collapse
Hello i need help trying to unroot the phone, i have previously done this but, i am not able go into download mode i get a "fastboot mode started" and it does not let me go back to install the stock ROM and return it
jayperez92 said:
Hello i need help trying to unroot the phone, i have previously done this but, i am not able go into download mode i get a "fastboot mode started" and it does not let me go back to install the stock ROM and return it
Click to expand...
Click to collapse
Make Sure the LG Usb drivers are installed. Then The phone must be off. After that hold the Volume Up button, plug in the usb cable to the computer while holding the volume up button. Let go only when you see the screen get to the download mode. Only then can you use the LG Flash tool for KDZ
vel0city said:
Make Sure the LG Usb drivers are installed. Then The phone must be off. After that hold the Volume Up button, plug in the usb cable to the computer while holding the volume up button. Let go only when you see the screen get to the download mode. Only then can you use the LG Flash tool for KDZ
Click to expand...
Click to collapse
That is exactly what I did when I plug in my phone it shows the download mode icons in the middle for about 0.3 sec and goes straight to the "fastboot mode started" with the whole screen black. it does it very fast it doesn't go to the downloading firmware part
jayperez92 said:
That is exactly what I did when I plug in my phone it shows the download mode icons in the middle for about 0.3 sec and goes straight to the "fastboot mode started" with the whole screen black. it does it very fast it doesn't go to the downloading firmware part
Click to expand...
Click to collapse
If download mode doesn't work you need to push these files fastboot with adb commands. Go to THEPagel's thread with all the stock zips and extract those out and push each and every individual files via fastboot. Remember you need fastboot and adb installed on your computer before proceeding. If you are new to fastboot and adb then suggest searching for a tutorial on that before even attempting this.
jayperez92 said:
That is exactly what I did when I plug in my phone it shows the download mode icons in the middle for about 0.3 sec and goes straight to the "fastboot mode started" with the whole screen black. it does it very fast it doesn't go to the downloading firmware part
Click to expand...
Click to collapse
why don't you just flash a stock 5.0 lollipop rom that isn't rooted. Don't flash su and then you'll have a stock rom without root and twrp.
Still_living714 said:
why don't you just flash a stock 5.0 lollipop rom that isn't rooted. Don't flash su and then you'll have a stock rom without root and twrp.
Click to expand...
Click to collapse
How am i going to flash a new stock ROM without using TWRP if I can't get to the download mode?
jayperez92 said:
How am i going to flash a new stock ROM without using TWRP if I can't get to the download mode?
Click to expand...
Click to collapse
since you're rooted download flashify and install twrp like that.
Still_living714 said:
since you're rooted download flashify and install twrp like that.
Click to expand...
Click to collapse
My intention is to have a stock ROM without TWRP so I can return it. Do you think that would work?
jayperez92 said:
My intention is to have a stock ROM without TWRP so I can return it. Do you think that would work?
Click to expand...
Click to collapse
like I said in my other post. Download a stock 5.0 lollipop rom. After your done flashing don't flash twrp. It's going to ask you that you're not rooted and if you will like to root. Press no then reboot. There you go back to stock without twrp and root.
ThePagel has an untouched stock rom
Thanks alot man I will try that later today thanks
thanks a lot man I will try that thanks again
jayperez92 said:
thanks a lot man I will try that thanks again
Click to expand...
Click to collapse
No problem ?were you able to return back to stock?
My girlfriend didn't want to return it, she was like forget it last LG i get to hard to everything root, unroot.
vel0city said:
If download mode doesn't work you need to push these files fastboot with adb commands. Go to THEPagel's thread with all the stock zips and extract those out and push each and every individual files via fastboot. Remember you need fastboot and adb installed on your computer before proceeding. If you are new to fastboot and adb then suggest searching for a tutorial on that before even attempting this.
Click to expand...
Click to collapse
Sorry I know it has been a while since this post, but this friday I need to return the phone I dont know where to find the fastboot process do you where can I find it.
---------- Post added at 08:14 AM ---------- Previous post was at 08:07 AM ----------
[600] Fast mode started
[690] -reset-
[690] -portcharge-
[760] fastboot: processing commands
any help will be much appreciate it
I just rooted my S6 Edge plus. I then tried installing Xposed framework through TWRP. Afterwards, it would boot to a black screen for like 5 minutes, and then jump to the Sprint LTE screen. It just stays there, and applying a factory reset did not work. Please tell me I didn't completely brick my device!
I think
if you have access to download mode you need to download and flash the stock firmware for your device build
TheUnknownChaser said:
I think
if you have access to download mode you need to download and flash the stock firmware for your device build
Click to expand...
Click to collapse
Downloaded and about to try flashing it now! Fingers crossed!
TheUnknownChaser said:
I think
if you have access to download mode you need to download and flash the stock firmware for your device build
Click to expand...
Click to collapse
You are the man!!!!! It worked!!!!