Develop Bugs

[Q] Anyone installed the Xposed framework yet?

Hi All.
Apologies if this is in the wrong forum, I am unable to post to the development board due to lack of posts.
I was wondering if anyone has installed the Xposed framework on the International HTC One M8 yet? I know this requires root, and a method for obtaining root has been laid out on this forum
http://forum.xda-developers.com/showthread.php?t=2694564
but some of the posts state that installation of Xposed when using this root method has not been possible due to the /system folder still being write protected.
It seems others have had some success in installing the Xposed framework when using this method (WeakSauce)
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=139157680
but this method does not work on international versions, only Verizon.
Basically I want to install Xposed in as simple a way as possible, with the end goal being to install the Immerse Me module so as all apps will run in immersive mode.
Any help/info would be very much appreciated.
Cheers.

I have it installed and working. You have to install it as a zip thru twrp.

In for an answer to this. I need Xposed before I can root with Weaksauce.

pettsium said:
Hi All.
Apologies if this is in the wrong forum, I am unable to post to the development board due to lack of posts.
I was wondering if anyone has installed the Xposed framework on the International HTC One M8 yet? I know this requires root, and a method for obtaining root has been laid out on this forum
http://forum.xda-developers.com/showthread.php?t=2694564
but some of the posts state that installation of Xposed when using this root method has not been possible due to the /system folder still being write protected.
It seems others have had some success in installing the Xposed framework when using this method (WeakSauce)
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=139157680
but this method does not work on international versions, only Verizon.
Basically I want to install Xposed in as simple a way as possible, with the end goal being to install the Immerse Me module so as all apps will run in immersive mode.
Any help/info would be very much appreciated.
Cheers.
Click to expand...
Click to collapse
Just installed immerse me too and it works well.

skoobee said:
I have it installed and working. You have to install it as a zip thru twrp.
Click to expand...
Click to collapse
Sorry, what do you need to install as a zip through twrp?
My understanding of the method is
1) flash twrp
2) install the root.zip through twrp.
3) install SuperSu from play store
4) install Xposed installer from play store
5) install framework through xposed app
Did you get the xposed framework installed a different way?

I'm on ATT but I had to flash the xposed installer in recovery. It wouldn't install any other way
Sent from my HTC One_M8 using Tapatalk

pettsium said:
Sorry, what do you need to install as a zip through twrp?
My understanding of the method is
1) flash twrp
2) install the root.zip through twrp.
3) install SuperSu from play store
4) install Xposed installer from play store
5) install framework through xposed app
Did you get the xposed framework installed a different way?
Click to expand...
Click to collapse
If u go into the xposed installer》framework》installation mode and choose recovery (write zip to sd card, flash manually). Then go into recovery (twrp) and install the file u just created it works fine.

skoobee said:
If u go into the xposed installer》framework》installation mode and choose recovery (write zip to sd card, flash manually). Then go into recovery (twrp) and install the file u just created it works fine.
Click to expand...
Click to collapse
Great. Worked perfectly. You were right, manual install was what was needed.
Are you finding the immersive mode stable? For me the black bar sometimes "sticks" after making it appear

pettsium said:
Great. Worked perfectly. You were right, manual install was what was needed.
Are you finding the immersive mode stable? For me the black bar sometimes "sticks" after making it appear
Click to expand...
Click to collapse
I switched immersive mode off as it made texting difficult - the bottom row would be cut off so couldnt see what I was typing.

Switch to Magisk from supersu

Need your help guys. I am running beta 27 with super su V2. 82 SR 5....i heard now magisk is supported in beta 27...how to I unroot supersu, install magisk 14.5(1456) and still pass safety net... I tried searching for a solution everywhere but couldn't find a solution to this..... Please help... :crying:

uutsav said:
Need your help guys. I am running beta 27 with super su V2. 82 SR 5....i heard now magisk is supported in beta 27...how to I unroot supersu, install magisk 14.5(1456) and still pass safety net... I tried searching for a solution everywhere but couldn't find a solution to this..... Please help... :crying:
Click to expand...
Click to collapse
It's fairly simple. You will need unsu zip (from SuperSu official thread) and the Magisk zip downloaded where you can easily find it.
Boot to recovery
** create a Backup **
Flash unsu
(Assuming no errors) Flash Magisk
Again assuming no errors, reboot system
In your list of apps you should have a new"Magisk Manager" app and your "SuperSu" should be gone.
Thats it really. Took me a whole of 10 minutes, of which 7 minutes were backup [emoji6]

tropicanapure said:
It's fairly simple. You will need unsu zip (from SuperSu official thread) and the Magisk zip downloaded where you can easily find it.
Boot to recovery
** create a Backup **
Flash unsu
(Assuming no errors) Flash Magisk
Again assuming no errors, reboot system
In your list of apps you should have a new"Magisk Manager" app and your "SuperSu" should be gone.
Thats it really. Took me a whole of 10 minutes, of which 7 minutes were backup [emoji6]
Click to expand...
Click to collapse
And you passed safety net

uutsav said:
And you passed safety net
Click to expand...
Click to collapse
Yes! That was my main motivation for switching. That and SuperSu no longer being run by chainfire Trust me Magisk does a far better job than Super Su.
Also worth looking at this URL
https://android.gadgethacks.com/how-to/magisk-101-switch-from-supersu-magisk-pass-safetynet-0177578/
Forgot to mention you will need to uninstall xposed (can be reinstalled after). I don't use xposed.

tropicanapure said:
Yes! That was my main motivation for switching. That and SuperSu no longer being run by chainfire Trust me Magisk does a far better job than Super Su.
Also worth looking at this URL
https://android.gadgethacks.com/how-to/magisk-101-switch-from-supersu-magisk-pass-safetynet-0177578/
Forgot to mention you will need to uninstall xposed (can be reinstalled after). I don't use xposed.
Click to expand...
Click to collapse
I tried flashing unsu and it asked me to flash the stock boot image in TWRP.... Any ideas mate..
I am sorry to keep bugging.... But I am lost

Look for boot.img in the ROM zip and flash it.

I was just about to say that myself. See
https://forum.xda-developers.com/showpost.php?p=63615067
Like the previous post said, you need a pristine boot.img and your ROM zip is the ideal place to find it.

Dirty flash your Beta27 again and it should be clean, THEN reboot and then install Magisk

Now i flashed beta 28, flashed recovery and flashed magisk again... While I was able to flash it... But getting safety net error....
My life is finished...

If you were able to install magisk then you should take this to the official magisk support thread. You are more like to get a better variety of suggestions there.
Just saying.

[Solved]Xposed Framework

Does anyone managed to install XposedFramework?
All my efforts ends in bootloop

Work fine for me. Version 88.2
API 25.

patgou.007 said:
Work fine for me. Version 88.2
API 25.
Click to expand...
Click to collapse
How did you install? using magisk?
Please give me an exact totorial.

Install via twrp. Like it explain in xposed thread.

patgou.007 said:
Install via twrp. Like it explain in xposed thread.
Click to expand...
Click to collapse
my device is XT1794 (Dual Sim)
rooted using magisk.
Installation of right framework using twrp, installing xposed installer, unabel to recognize istalled framework!
Installing via installer apk ends in bootloop.
it`s your turn, please

I dont know. Sorry

1. Download Xposed Framework installer via Magisk and install
2. Move Xposed Framework installer from root/data/app to root/system/app and give all permissions, reboot device
3. use installer to install framework via recovery , reboot starts. Dont`t panic reboot will take more than five minutes
4. you`re done

Magisk on Android p?

Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?

marvi0 said:
Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?
Click to expand...
Click to collapse
Yes, it works for me and I installed couple of modules as well...

Great thanks will try again.

Wow I thought I was the only one. Modules not showing up here either and I've tried reinstalling in a bunch of different ways.

marvi0 said:
Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?
Click to expand...
Click to collapse
marvi0 said:
Great thanks will try again.
Click to expand...
Click to collapse
gigatex said:
Wow I thought I was the only one. Modules not showing up here either and I've tried reinstalling in a bunch of different ways.
Click to expand...
Click to collapse
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:

Badger50 said:
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:
Click to expand...
Click to collapse
For me I noticed I have to reboot when I install each and every module. On my oneplus-5t I could install a bunch and then reboot once but on the pixel presumably due to the new firmware, you have to reboot after each module is installed and this definitely helped me.

Badger50 said:
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:
Click to expand...
Click to collapse
I don't think its a module specific compatibility issue. Every single module I try to install seems to install fine but just doesn't show up in the list of modules. I've tried a lot of different ones.

gigatex said:
I don't think its a module specific compatibility issue. Every single module I try to install seems to install fine but just doesn't show up in the list of modules. I've tried a lot of different ones.
Click to expand...
Click to collapse
Interesting. That's kinda weird because I've seen many users running them on the DP's. Does clearing magisk manager app cache/data help at all? And I'm sure you've granted storage permissions as well.

Badger50 said:
Interesting. That's kinda weird because I've seen many users running them on the DP's. Does clearing magisk manager app cache/data help at all? And I'm sure you've granted storage permissions as well.
Click to expand...
Click to collapse
Yep, tried that and also installing through manually patching boot image, flashing through TWRP and installing through direct installation through magisk manager. Sometimes the installation fails and on reboot it'll say it's installed but safetynet will fail. Even when it installs fine modules never work though. Module downloading is all fine, during installation it goes ahead just fine as well but the modules just don't show up in the list after installation/reboot.

gigatex said:
Yep, tried that and also installing through manually patching boot image, flashing through TWRP and installing through direct installation through magisk manager. Sometimes the installation fails and on reboot it'll say it's installed but safetynet will fail. Even when it installs fine modules never work though. Module downloading is all fine, during installation it goes ahead just fine as well but the modules just don't show up in the list after installation/reboot.
Click to expand...
Click to collapse
Don't know what to tell you my friend. Grab some install logs and head over to the magisk forums for some additional help is all I can suggest. I wish you luck :good:

I'm trying to figure out where i went wrong, because the last time i tried ROOTing PDP3, i couldnt boot and i am yet to see and PDP3 Patched_Boot.img or TWRP Recovery...
I did the following:
-Fastboot Flash-ALL PDP3
-Boot and set-up device PIN
-Boot into Fastboot
-Fastboot boot TWRP3212.img
-Use TWRP Installer to install Custom Recovery on device
-Reboot Recovery
-Flash Magisk v16.4
-REBOOT SYSTEM
-I think i ended up Looping @ G

Installing Viper4Android

After days of trying numerous different ways I've finally managed to get Viper to work my Oneplus 7T Pro
You will need to have a modded recovery with adb enabled:-
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
First I removed the any previous Viper module in Magisk and rebooted.
I then uninstalled the Viper App and rebooted again.
So I then had a clean starting point.
I installed The SELinux Switch app from XDA to set SELinux mode to Permissive:-
https://forum.xda-developers.com/and...witch-t3656502
I turned off Google Play Protect.
I then installed the version 2.7.1.0 module in Magisk.
Installed driver and it rebooted.
Stuck at Fastboot screen.
Reboot to Recovery
I then did the following in adb to delete the post-fs-data.sh file which is the file that stops the phone booting.
1) adb shell
2)cd to /data/adb/modules/ViPER4AndroidFX
3)rm post-fs-data.sh
4)exit
reboot to Fastboot and then Start
Then it just worked.
Hopefully this method will work for others.

Sounds cool. Congratulations

Wrong thread!

Legend!!!

Wouldn't it be easier to just make a viper zip without postfs data?

f41lbl0g said:
Wouldn't it be easier to just make a viper zip without postfs data?
Click to expand...
Click to collapse
I don't know how to do that.
That would be a question for the people who write Viper.

f41lbl0g said:
Wouldn't it be easier to just make a viper zip without postfs data?
Click to expand...
Click to collapse
We don't have the source of the module, and you can't just take the installed module folder and zip it to a module so I don't think it's possible.
Might be wrong though.
Sent from my OnePlus7TPro using XDA Labs

thanks mate. worked for me too. finally
Edit: it is not processing on Bluetooth devices

Here try this zip I modified, it should work fine on the OP7T and OP7T Pro if this fix does indeed work. Shouldn't need any custom recovery or adb. Can someone report if my modified file works? If it doesn't just use the custom recovery with adb to remove the module.
Note: Selinux will need to be changed to permissive before installing the module using this:
https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
All credits to:
- @ahrion
- @zhuhang
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt

f41lbl0g said:
Here try this zip I modified, it should work fine on the OP7T and OP7T Pro if this fix does indeed work. Shouldn't need any custom recovery or adb. Can someone report if my modified file works? If it doesn't just use the custom recovery with adb to remove the module.
Note: Selinux will need to be changed to permissive before installing the module using this:
https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
All credits to:
- @ahrion
- @zhuhang
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
Click to expand...
Click to collapse
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
Did you make selinux permissive?

f41lbl0g said:
Did you make selinux permissive?
Click to expand...
Click to collapse
Yes i turned the selinux permissive from the beginning. I haven't mentioned that because I forgot it by mistake

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
I had the same. I had to install and delete the .sh twice until it worked. And it works fine.

Alexisd1 said:
You will have to make this steps to make it work.These steps are from the original thread and for my situation the module It didnt worked properly.
I have flashed your zip with magisk manager,I havent rebooted,I have installed the drivers from Viper and then I rebooted. I got stucked in fastboot. I had to make rm post-fs-data.sh to force the phone get fixed from the loop.Then I have opened Viper and then asked me again to install the drivers.Then I got stucked again and I had to put the same command through adb shell rm post-fs-data.sh. After that It did worked but I dont know why its not working with your module.
Click to expand...
Click to collapse
c0caine_train said:
I had the same. I had to install and delete the .sh twice until it worked. And it works fine.
Click to expand...
Click to collapse
At this point just flash the zip from the original post, don't use my zip. I'll test it out more once my phone arrives.

Do you need to keep selinux permissive to continue to use Viper due to deletion of the .sh? Or can one toggle it back post this process?

Wow, this Viper4android seems to be a pain for our phones. I already tried it approximately 5 times and having to use the MSM tool to be able to boot up again from scratch I'm coming from a different flagship and I never had a problem rooting and installing apps like Viper4android before. I don't know if it would be too much to ask. that once someone has found a proven successful method to please share. I don't want to seem lazy I've been searching all over and so far the methods are not definite and very frustrating. Ive had my phone for a week still adjusting. Anyway any help would be appreciated and please no offensive comments. Thanks

slapman said:
Wow, this Viper4android seems to be a pain for our phones. I already tried it approximately 5 times and having to use the MSM tool to be able to boot up again from scratch I'm coming from a different flagship and I never had a problem rooting and installing apps like Viper4android before. I don't know if it would be too much to ask. that once someone has found a proven successful method to please share. I don't want to seem lazy I've been searching all over and so far the methods are not definite and very frustrating. Ive had my phone for a week still adjusting. Anyway any help would be appreciated and please no offensive comments. Thanks
Click to expand...
Click to collapse
Yeah, read the first post...
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
Yeah, read the first post...
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Yes, I did read the post but I just don't want to mess up the phone again. Maybe Ill try again when my mind is fresh had to many mishaps but thanks.

slapman said:
Yes, I did read the post but I just don't want to mess up the phone again. Maybe Ill try again when my mind is fresh had to many mishaps but thanks.
Click to expand...
Click to collapse
Which version do you have? EU or international?
This recovery works fine in EU version, if there's is anything that messes up it's likely a module, which can easily be removed with the modded recovery.
Sent from my OnePlus7TPro using XDA Labs

When I try to cd to /data/adb/modules/ViPER4AndroidFX I get cd: bad substitution
I'm on OOS 10.0.4 (international ver.) with modified recovery for ADB.