Request help! Stuck on Logo - Galaxy Tab 3 Q&A, Help & Troubleshooting

Hi,
my device: Galaxy Tab 3 10.1 p5200
I wanted to flash CyanogenMod 12.1. First I have used Odin to install TWRP (I can still get into custom recovery).
After that, I wiped the Dalvik Cache, System and Cache but now the device only show the Samsung logo. I have tried to use adb sideload to flash the rom. In the cmd window I get the following error when I use " adb devices" or adb sideload xxx.zip":
adb server is out of date. killing...
ADB server didn't ACK
*failed to start daemon*
error: unkown host service
I don't have any files on the devices to flash. I still have to copy the rom and so on onto the device.
What Can I do to flash the custom rom and get my device worling again?

I have installed a stock rom with Odin. Now I have another problem. When I connect the device with the pc the device is stucked in a boot loop. It goes on and off.
After disconnecting from a charging cable the device dies immedietly.
Edit: I can't get into the Odin mode to use Odin again

Now I get into the download. THe problem was the device was low on battery and I had to use a charger with 3-4A output.

After tryying over 6 stock roms I have one that worls now.

Related

[Q] Stuck in recovery with Fastboot and ADB failure

Hi,
First of all I'd like to say I tried to look this up in the forum but since my problem is kind of a combination of several problems, I failed to find a proper solution.
I have a rooted galaxy nexus running 4.3 deodexed. I downloaded a Mod to flash in CWM Recovery. Did a flash and factory reset and as I tried to flash it, it gave an error and aborted the installation and since then I can't get the phone out of bootloader. I can enter recovery mod from there however, I can't boot the phone.
Unfortunately I don't have a stock rom or any other zip/img/tar etc file on my sdcard.
When I plug my phone on bootloader I get the error message FASTBOOT fail command
I downloaded adb drivers but when I try to use adb push command I get an error message saying "ADB is not a recognized as an internal or external command etc." I'm doing this on the folder where extracted adb files.
I used to skipnote nexus toolkit. But even though I can get it to recognize my phone on either fastboot or adb mode, I fail to flash / push or install anything on my phone. If I try ADB, it waits forever on waiting for ADB phase. If I use fastboot however, it gives an error message and aborts the operation.
Downloaded & installed kies on the computer. I tried ODIN to push files but I failed at that too. Seems like Odin doesn't recognize the device.
As a result, I can't use my phone right now. I'm open for any suggestions for installing a stock rom and unrooting or rooting and installing a custom rom.
Thank you all very much in advance,
solved
I used another laptop with a fresh skipnote nexus toolkit and everything worked just fine.
shakrooph said:
Hi,
First of all I'd like to say I tried to look this up in the forum but since my problem is kind of a combination of several problems, I failed to find a proper solution.
I have a rooted galaxy nexus running 4.3 deodexed. I downloaded a Mod to flash in CWM Recovery. Did a flash and factory reset and as I tried to flash it, it gave an error and aborted the installation and since then I can't get the phone out of bootloader. I can enter recovery mod from there however, I can't boot the phone.
Unfortunately I don't have a stock rom or any other zip/img/tar etc file on my sdcard.
When I plug my phone on bootloader I get the error message FASTBOOT fail command
I downloaded adb drivers but when I try to use adb push command I get an error message saying "ADB is not a recognized as an internal or external command etc." I'm doing this on the folder where extracted adb files.
I used to skipnote nexus toolkit. But even though I can get it to recognize my phone on either fastboot or adb mode, I fail to flash / push or install anything on my phone. If I try ADB, it waits forever on waiting for ADB phase. If I use fastboot however, it gives an error message and aborts the operation.
Downloaded & installed kies on the computer. I tried ODIN to push files but I failed at that too. Seems like Odin doesn't recognize the device.
As a result, I can't use my phone right now. I'm open for any suggestions for installing a stock rom and unrooting or rooting and installing a custom rom.
Thank you all very much in advance,
Click to expand...
Click to collapse

[Q] Stuck at boot, ADB not working

I was looking to do a full wipe from TWRP and wanted to wipe data as well. Knowing that that would erase everything from the internal storage and not having an SD card available to me now I decided to wipe everything and then transfer the new ROM with adb commands.
Before wiping, I wanted to make sure that adb was working first. So I downloaded the Android SDK and booted to TWRP. Went to Advanced--->ADB Sideload and started the command prompt on my PC. From the folder were adb.exe was I typed "adb usb" and got error:device not found.
I don't know why but after 30 minutes trying to fix that I pressed the "Fix permissions" option in TWRP and now my phone is stuck at the boot logo every time I try to turn it on. I also noticed in Device Manager on my PC that every time I connect the phone to the PC that there is a yellow exclamation mark next to the phone which suggests that I don't have the needed drivers. However I tried to install versions 3.10 and the newest 3.12 and the exclamation mark is still there.
So my question is how do I reach the phone with ADB and transfer the flashable ROM zipfile so I can get the phone past the boot logo?
Well I'll answer myself if anybody has the same problem in the future. It was obviously the USB driver's fault and since none of the LG's drivers worked, I used Google's USB drivers and was able to adb sideload the ROM zip and now it's booting into the OS.
So always check your drivers people! In case LG's don't work, then use Google's!

How to transfer a zip on my sdcard without adbsideload

I everyone,
I need your help, I tried to install a new rom (AICP : this one) , and somehow forgot to do a backup.
When I boot I only get the swirling logo, never get to fully load.
The phone is not bricked, I can still access the bootloader / fastboot and my recovery, so I could simply flash another rom... but I can't figure how to get the zip file on the /sdcard.
I can't use adb sideload or push, I have HTC sync and android sdk installed, I have no problem to use fastboot commands, so I guess I don't have any driver problem, but adb devices never shows my phone (Tried while off, booted on bootloader, on fastboot, and on recovery, never shows up when I try adb devices)
On windows I get a driver error when plugging my phone while in recovery, but I don't find how to install it.
So... is there a way to mount the /sdcard/ as an external drive in windows or ubuntu ? Or do you have a workaround for adb ?
Thanks a lot !
Vincent

Help! TWRP "cant mount .*" boot loop

Hi all.
After OTA upgrade to android 6 of unlocked unrooted nexus 7 2013 WiFi i decided to unlock and install twrp.
I used adb and fastboot to flash version 2.8.7.
It went smooth but after reboot to recovery, twrp shell returns "can't mount *" for all partitions. And the device is bootlooping into this state (unless I boot into bootloader).
The worst part is that my pc wont recognise the tablet when connected. Adb devices returns an empty list. So i cant even flash stock recovery or do anything uing adb/fastboot.
HELP!!!!
[solved] falshed factory image manually using fastboot
It seems fastboot recognized the device while adb/pc couldn't.
I downloaded Android 6 factory image from google and flashed-all that.
Just updating in case some other noob who doesn't fully understand adb/fastboot relations.

[D855]CMR+CM14 fail to boot (SOLVED)

Hello everyone I'm new here.
I got my D855 upgraded to CM14 couple of days ago using TWRP and it was a little buggy, so I decided to stick with the nightly update. And I also noticed that they just released CMR so I flashed my recovery from TWRP to CMR, hoping to get better compatibility. But I was wrong, during my latest upgrading, also my first time using CMR, after the installation process completed, it just stucked there. After half an hour waiting I decided to pull the battery out, which opened pandora's box, the system just wouldn't load, stucked on the CM face page forever.
Then I tried lots of stuff, none of which worked:
go to recovery and use usb to transfer TWRP image to /sdcard then flash it back to TWRP, so that I could flash the rom again cuz previously didn't have any issue with TWRP - failed because CMR had no function for usb connection
adb push TWRP image to /sdcard then flash it - failed because somehow usb debugging is disabled
adb sideload to flash TWRP - failed because usb debugging is disabled
fastboot flash TWRP recovery - failed, CMR does allow me to reboot to bootloader but when I connected and typed "fastboot devices" in terminal, nothing showed up
Any ideas? Thanks in advance!
Nov 21: Problem solved by flashing factory rom using LG flash tool, defly a brick saver

Categories

Resources