Related
phone is hang on LOLLIPOP Logo ...
hard reset done but still the same problem
any TOT or KDZ available ???
So any thing available for this TAB ?
aamszia said:
So any thing available for this TAB ?
Click to expand...
Click to collapse
No kdz is available. Your best bet to return to stock is a nandroid backup or one of the stock based ROMs timmytim posted in the development section.
Hard Bricked my lg gpad v410 was stuck in a loop couldn't even get recovery. Caused from using the odex att 4.42 then tried updating with twrp recovery still installed. All I could get was the twrp recovery when rebooted. Next tried stock recovery, bad move, stuck in a bootloop of the lg logo. Recovery gone, reset did not work, download mode worked though.
Used the lg offline mobile tool and found uk41011a.kdz Yay unbricked. Problem is though, its an AT&T tablet with us cellular firmware. My Sim card is now unreadable since it is an att Sim.
Any ideas?
bethnesbitt hey! I really need that us cell kdz can you post it? please? lol
bethnesbitt said:
Hard Bricked my lg gpad v410 was stuck in a loop couldn't even get recovery. Caused from using the odex att 4.42 then tried updating with twrp recovery still installed. All I could get was the twrp recovery when rebooted. Next tried stock recovery, bad move, stuck in a bootloop of the lg logo. Recovery gone, reset did not work, download mode worked though.
Used the lg offline mobile tool and found uk41011a.kdz Yay unbricked. Problem is though, its an AT&T tablet with us cellular firmware. My Sim card is now unreadable since it is an att Sim.
Any ideas?
Click to expand...
Click to collapse
Need that file badly, have a 7inch uk410 paper weight... Stuck in Recovery and wont flash anything, thanks...
jr71x said:
Need that file badly, have a 7inch uk410 paper weight... Stuck in Recovery and wont flash anything, thanks...
Click to expand...
Click to collapse
Here is the AT&T version, https://drive.google.com/file/d/0B7wEkGpeHpR1SVQwZTFUdkRmbjQ/view?usp=sharing BTW this is a test version, so if you try to install cygenmod, the boot screen is buggy, also, here is the verizon version:
http://lg-phone-firmware.com/index.php?id_mod=262
Is there a way to flash a ddr?
VRZ or UK
jr71x said:
Need that file badly, have a 7inch uk410 paper weight... Stuck in Recovery and wont flash anything, thanks...
Click to expand...
Click to collapse
Was wondering if you downloaded this, and if so, where you able to get the VRZ kdz? I redid my pc thinking I would be able to redownload the UK or VRZ version but now I can't find them!!!
still no free kdz available ?
bethnesbitt said:
Hard Bricked my lg gpad v410 was stuck in a loop couldn't even get recovery. Caused from using the odex att 4.42 then tried updating with twrp recovery still installed. All I could get was the twrp recovery when rebooted. Next tried stock recovery, bad move, stuck in a bootloop of the lg logo. Recovery gone, reset did not work, download mode worked though.
Used the lg offline mobile tool and found uk41011a.kdz Yay unbricked. Problem is though, its an AT&T tablet with us cellular firmware. My Sim card is now unreadable since it is an att Sim.
Any ideas?
Click to expand...
Click to collapse
Can you root and edit the build.prop through es root explorer, and change provider from US cellular to ATT and then change the APN setting?
bethnesbitt said:
Hard Bricked my lg gpad v410 was stuck in a loop couldn't even get recovery. Caused from using the odex att 4.42 then tried updating with twrp recovery still installed. All I could get was the twrp recovery when rebooted. Next tried stock recovery, bad move, stuck in a bootloop of the lg logo. Recovery gone, reset did not work, download mode worked though.
Used the lg offline mobile tool and found uk41011a.kdz Yay unbricked. Problem is though, its an AT&T tablet with us cellular firmware. My Sim card is now unreadable since it is an att Sim.
Any ideas?
Click to expand...
Click to collapse
What tool did U use to flash the kdz file, I have the at&t v410 also but anything besides the logo will do. Does wifi work with the US cellular one?
creamdotcom said:
What tool did U use to flash the kdz file, I have the at&t v410 also but anything besides the logo will do. Does wifi work with the US cellular one?
Click to expand...
Click to collapse
I used lg flashtool 2014 to flash the uk41011a_00.kdz. That did the trick, then I was able to flash the V41007h_0.kdz after that.
Wifi works, will not read your simcard.
bethnesbitt said:
I used lg flashtool 2014 to flash the uk41011a_00.kdz. That did the trick, then I was able to flash the V41007h_0.kdz after that.
Wifi works, will not read your simcard.
Click to expand...
Click to collapse
Please post links I'm stuck
files needed
creamdotcom said:
Please post links I'm stuck
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC645L232Z4A0G8E682K22/UK41011a_00.kdz
bethnesbitt said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC645L232Z4A0G8E682K22/UK41011a_00.kdz
Click to expand...
Click to collapse
Thanks Thank U and thanks again, I have been searching.
So once I flash the demo I use the same method to flash over the demo by reentering download mode?
Have U been able to update and what are U currently running?
Download
Mine is bricked hard so right now its a paperweight. If you use the UK might be able to work unlocking the bootloader. Just turn off tab, hold, either just vol up or vol down, cant remember exactly then hook to PC. In fastboot do OEM unlock.
If using att then the v41007h will work with your att sim. If its a vzw tab, then get the vzw stock kdz. If its a att tab the vzw doesn't work right, wouldn't waste the effort. I tried and it asked for a PW with the vk kdz flash.
bethnesbitt said:
Mine is bricked hard so right now its a paperweight. If you use the UK might be able to work unlocking the bootloader. Just turn off tab, hold, either just vol up or vol down, cant remember exactly then hook to PC. In fastboot do OEM unlock.
If using att then the v41007h will work with your att sim. If its a vzw tab, then get the vzw stock kdz. If its a att tab the vzw doesn't work right, wouldn't waste the effort. I tried and it asked for a PW with the vk kdz flash.
Click to expand...
Click to collapse
To get fastboot I take it I have to be rooted?
Looking into that now, I bought this tablet with 5.0 rooted with Kngroot and when I ran Super Su that's what bricked Me to here.
This US Cellular from isn't bad can I use their network now?(not a fan of AT&T)
I thought I saw a post that had the actual AT&T kdz however if U say I can unlock the bootloader on here I will stay. Or did U mean sim unlock?
jterr347 said:
Can you root and edit the build.prop through es root explorer, and change provider from US cellular to ATT and then change the APN setting?
Click to expand...
Click to collapse
Did U try this method? I'm still using the US Cellular firmware with My at&t G Pad 7lte with at&t sim over wifi.
creamdotcom said:
Did U try this method? I'm still using the US Cellular firmware with My at&t G Pad 7lte with at&t sim over wifi.
Click to expand...
Click to collapse
I did not, no one responded so I wasn't sure, I used the walkthrough on re partition and I run CyanogenMod 12.1
jterr347 said:
I did not, no one responded so I wasn't sure, I used the walkthrough on re partition and I run CyanogenMod 12.1
Click to expand...
Click to collapse
Well back to square one, waiting for a at&t kdz that updates
creamdotcom said:
Well back to square one, waiting for a at&t kdz that updates
Click to expand...
Click to collapse
Same issue here. Trying to go back to stock and no luck. I did the debug kdz after the stock rom I tried did an OTA update and got stuck in TWRP. Installed the same stock ROM, flashed stock recovery, and unrooted. Still every time I try the OTA, it tells me I am suspected of rooting. At least it doesn't get stuck in TWRP anymore. There has to be some kind of efuse in this tablet. If not, I still have no idea what I need to get rid of to do the OTA update and get Lollipop.
My situation is different from everyone's so i figured i'd share this with you all. I accidently turned off OEM Unlocker/USB Debugging in developer options and when i start my phone i'm completely locked out I CAN get into download mode but CANT flash anything at because the bootloader is locked. So im just writing this to let all you (Sprint Galaxy S6 G920P owners) not to do this unless u want a really expensive high end paperweight.... i can't flash anything because the bootloader is locked...... :crying::crying::crying:
Your not able to odin the OE7 tar?
Sent from my SM-G920P using XDA Free mobile app
wvebert said:
Your not able to odin the OE7 tar?
No in fact like i said my situation is different in a sense i'm locked out of the binary via the OEM switch being off im assuming....And the FRP will not let me modify ANYTHING lol crazy right...
btw can u please PM the proper locations of all the stock 5.11 firmware aka The BL, AP,CP & CSC stock files if they exist lol and all the full stock firmware. BTW anyone interested in this situation i attached pix of my screen after flashing Stock OE7
tar via Odin 3.10.6
Click to expand...
Click to collapse
I just had the same problem. I ended up re-flashing the stock OF7 tarball in Odin.
OF7 tallball
What is "OF7 tallball".
Where can i find that.
My phone is: G920T.
what is that, i want to know too
I am having the same Issue with the G920T, did anyone find a solution for it?
Having tbe same exact problem as the OP. Everthing I flash through ODIN fails. Even flashing stock 5.1.1 OF7 fails. I believe it's because I was on OGA so I have to wait until the tarball for that comes out I guess.
I had this problem yesterday. The way I fixed it was to flash the F8 bootloader, and then I could get the unroot rom to load.
Maybe a fluke, but that is what I did to fix mine.
Now I am unable to unlock it. I tried ChainFire CF-Auto-root and TWRP - both give the custom recovery is blocked. Any help on this is appreciated.
Thanks.
BigBirdie said:
I had this problem yesterday. The way I fixed it was to flash the F8 bootloader, and then I could get the unroot rom to load.
Maybe a fluke, but that is what I did to fix mine.
Now I am unable to unlock it. I tried ChainFire CF-Auto-root and TWRP - both give the custom recovery is blocked. Any help on this is appreciated.
Thanks.
Click to expand...
Click to collapse
when you got the custom binary block did you just plug it in and odin and flash it or did you managed to get it in download mode ?
was it just plugging it the same way it was showing the block .. thanks
I had same issue as first post. so I odin to the stock 5.1.1 firmware. Now when I reboot and it asks to verify my gmail account I set up when I got device. I did that but it takes my info then pops back up with the verify screen I know I'm entering the correct info because I try a wrong pw and it says check pw. Has anyone else had it basically got back to verify gmail account ? also if you look in google at linked devices it shows tha last activity of you signing in? I hope I don't have a $600 paperweight!
Looking for help
XXX01 said:
My situation is different from everyone's so i figured i'd share this with you all. I accidently turned off OEM Unlocker/USB Debugging in developer options and when i start my phone i'm completely locked out I CAN get into download mode but CANT flash anything at because the bootloader is locked. So im just writing this to let all you (Sprint Galaxy S6 G920P owners) not to do this unless u want a really expensive high end paperweight.... i can't flash anything because the bootloader is locked...... :crying::crying::crying:
Click to expand...
Click to collapse
----------
I have the same exact problem with my Sprint S6.
I have tried all possible stock Firmwares :
G920PVPU1AOCF
G920PVPU1AOE2
G920PVPU2BOF7
G920PVPU2BOH1
None of them workes. any idea, please keep update.
I got this same exact problem yesterday on my SM-G920P as well. Been up all night trying to figure it out, has anyone found a solution to this?
Just got mine working again Apparently the original firmware I had on my phone was "G920PVPU3BOI1" so I just downloaded and flashed that in Odin and it flashed without the "Custom Binary Blocked by FRP Lock" error I kept on usually getting. So for anybody with this problem, if you are unsure which firmware you originally had on your phone before the brick, just try to flash all the possible ones via Odin until one works
How to find proper firmware while bricked.
sebasvinti said:
Just got mine working again Apparently the original firmware I had on my phone was "G920PVPU3BOI1" so I just downloaded and flashed that in Odin and it flashed without the "Custom Binary Blocked by FRP Lock" error I kept on usually getting. So for anybody with this problem, if you are unsure which firmware you originally had on your phone before the brick, just try to flash all the possible ones via Odin until one works
Click to expand...
Click to collapse
You can just go into recovery mode and the proper version is put on the top of the screen.
---------- Post added at 08:59 PM ---------- Previous post was at 08:49 PM ----------
ameenz77 said:
I am having the same Issue with the G920T, did anyone find a solution for it?
Click to expand...
Click to collapse
I have the same issue too, have you tried to flash it with the stock firmware? If not then there may be another solution...
i am having the same problem .
on my samsung galaxy SM J500H/DS
it says *CUSTOM BINARY BLOCK BY FRP*
the problem was I disable developing option
where you can see the OEM and USB DEBUGGING. what can I do.?
i just got the g920p from sprint and i rootd it the turned off oem and im having the same problem I can get to download mode and recovery mode I just dont know what to do. Ive tryed a few different firmware and nun of them have worked. Any suggestions? Thanks
I just downloaded the newest update of line and installed it through odin and it booted up and asked me for my gmail and it worked just fine and it's still factory unlocked
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere
also
please pm me if u fixed yours
Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now
Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?
The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.
I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore
need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?
Hola, alguien lo consiguió hacer..???
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/
m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse
ayuda
ATT ZE500CL/Z00D rom
WHATS THIS?
This is my port of CF-AUTOROOT for the Samsung Galaxy TAB E.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE or a TWRP backup in case of problems. This will trip the knox counter.
Flash with ODIN 3.10.7 in the AP slot.
Load the respective file below into the AP slot and hit start.
cfautoroot_sm-t377p.tar
cfautoroot_sm-t560nu.tar
NOTE: ON SOME 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
STOCK TWRP IMAGE FOR SM-T377P
This is a link to the stock system, boot, modem image for the T377P in case anyone needs it. Needs to be restored with twrp.
Thanks to @shawn1976 for providing this.
https://www.dropbox.com/s/skuwsbzm2zigd83/sm-T377PVPU1AOJ5-boot-system-modem-only.zip?dl=0
Credits: Chainfire and my testers - Phrozen99 and nates730
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
FRP lock
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Jasn7766 said:
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Click to expand...
Click to collapse
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
ashyx said:
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
Click to expand...
Click to collapse
That was my plan ...however they do not support this model number yet so its not available to be reflashed. I checked sammobile as well figuring I could download firmware and use Odin to reflash and same situation.
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Okay....will try and find that one.
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Badob said:
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Click to expand...
Click to collapse
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
Click to expand...
Click to collapse
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Badob said:
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Click to expand...
Click to collapse
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
ashyx said:
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
Click to expand...
Click to collapse
Thanks For the help!
Where do I get TWRP for Tab E T560, and how do I install it?
Thank you.
Edit: Found the answer.
ashyx said:
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Click to expand...
Click to collapse
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
Click to expand...
Click to collapse
Stevenwsmith said:
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
Click to expand...
Click to collapse
Surprised recovery doesn't work, considering the 2 devices are identical specs.
Try installing Twrp, you'll probably find that works OK.
Jasn7766 said:
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
Click to expand...
Click to collapse
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
JohnICon said:
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
Click to expand...
Click to collapse
What's the issue?
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
JohnICon said:
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
Click to expand...
Click to collapse
You realise you can't flash a custom rom with odin?
Also when you flash the stock t377r4 firmware what part fails?
The aboot fails every time I try to flash it
Ok so i was just rooting when my phone decides to die during so commands in adb. :crying:
Now i cant turn on the phone or boot into fastboot or bootloader. everytime i plug it in the charging light just flashes. Also my computer recognises the device as qualcomm hs-usb qdloader 9008 . ive read around the internet and ive found two methods. blank flash and qfil. issue is those tutorials were made for the moto g5 plus. I have searched around the internet and im beginnign to lose hope now. Can someone tell me how to fix this or give me the right blankflash version.
much appreciated
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Kim Il said:
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Click to expand...
Click to collapse
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
rajibahmed said:
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
Click to expand...
Click to collapse
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
TheFixItMan said:
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
Click to expand...
Click to collapse
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
rajibahmed said:
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
Click to expand...
Click to collapse
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
TheFixItMan said:
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
Click to expand...
Click to collapse
I dunno y either. Luckily I had insurance on it so now I got a new device
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
rajibahmed said:
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
Click to expand...
Click to collapse
How did u fix
infixremix said:
How did u fix
Click to expand...
Click to collapse
I had insurance so I just replaced the whole device
rajibahmed said:
I had insurance so I just replaced the whole device
Click to expand...
Click to collapse
Wtf insurance covers it ?
infixremix said:
Wtf insurance covers it ?
Click to expand...
Click to collapse
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
rajibahmed said:
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
Click to expand...
Click to collapse
Motorola warranty takes hardbricked dvices with locked bootlloadder?
CypherPotato said:
Motorola warranty takes hardbricked dvices with locked bootlloadder?
Click to expand...
Click to collapse
How the hell did u hradbrick ur device without an unlocked bootloader. And idk I think that after you start tampering with the os and system it kills ur warranty. You'll have to chat with someone at Motorola