hye everyone..my friend phone got this problem a few days ago..her note 2 stuck in bootloop..i can enter the recovery mode.and this RED ALERT shown up..see the picture below..can someone help me? Sorry for my bad english
Factory Reset
Hello and thank you for using Q&A,
please press Wipe Data/Factory Reset and Wipe Cache. After that, your phone should boot.
Kind regards
Trafalgar Square
I already wipe data a few times..still bootloop.cannot pass samsung logo..what about the RED LINES...is aomething going wrong with that phone??
UPDATE
flash stock firmware via odin and it fail..
Two times download the firmware..
Please someone help me..
Sent from my GT-I9100 using xda premium
Bro get the latest twrp and flash it via Odin. Open twrp recovery and go to advance wipe. From there format all the partitions. Reboot recovery, mount the partitions and format them once again. Reboot the phone in bootloader mode and flash the stock firmware.
vishal1286 said:
Bro get the latest twrp and flash it via Odin. Open twrp recovery and go to advance wipe. From there format all the partitions. Reboot recovery, mount the partitions and format them once again. Reboot the phone in bootloader mode and flash the stock firmware.
Click to expand...
Click to collapse
Thanx bro..i'll try this evening..but this is first time im using twrp..the last step im little bit confused..flash the stock firmware via odin?
paranoidisc said:
Thanx bro..i'll try this evening..but this is first time im using twrp..the last step im little bit confused..flash the stock firmware via odin?
Click to expand...
Click to collapse
After u hv formatted the partitions namely system, cache, dalvik cache, data, etc. Flash the stock firmware u have used earlier using Odin. F u hv the pit file for the phone use it to repartition bt be very careful.
As it looks there are no partitions, so there's nothing to flush/format/mount.
You will have to use a correct PIT file to recreate the partitions.
However, this means that your EFS is gone too. I hope you have a good backup of that!
After the PIT, you can flash TWRP and ROM as you like
Bright.Light said:
As it looks there are no partitions, so there's nothing to flush/format/mount.
You will have to use a correct PIT file to recreate the partitions.
However, this means that your EFS is gone too. I hope you have a good backup of that!
After the PIT, you can flash TWRP and ROM as you like
Click to expand...
Click to collapse
OMG...the phone totally stock firmware.never try to rooted before.it suddenly blackout.try to switch on back.stuck in bootloop..
I dont have any idea how to repartition or the PIT file...I must read a lot about the PIT file..
Thank U sir .....
Sent from my GT-I9100 using xda premium
paranoidisc said:
OMG...the phone totally stock firmware.never try to rooted before.it suddenly blackout.try to switch on back.stuck in bootloop..
I dont have any idea how to repartition or the PIT file...I must read a lot about the PIT file..
Thank U sir .....
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Bro its better u giv it 2 a service center else i can giv u the pit file n u can flash it along with the stock firmware
Pit File:
https://onedrive.live.com/embed?cid...=A8C496F804111624!786&authkey=AHz_esPC-3bZdkk
Sent from my GT-N7100 using Tapatalk
It looks like another SDS
vishal1286 said:
Bro its better u giv it 2 a service center else i can giv u the pit file n u can flash it along with the stock firmware
Pit File:
https://onedrive.live.com/embed?cid...=A8C496F804111624!786&authkey=AHz_esPC-3bZdkk
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Thank u bro..if u dont mind can u give me a link how to flash a pit file..i want to give a try
yaro666 said:
It looks like another SDS
Click to expand...
Click to collapse
After i googling..you tube it confirmed SDS ... the solution must change the emmc chip...
paranoidisc said:
After i googling..you tube it confirmed SDS ... the solution must change the emmc chip...
Click to expand...
Click to collapse
Whis version of android was installed as sds was patched in later version of jelly bean and kitkat
vishal1286 said:
Whis version of android was installed as sds was patched in later version of jelly bean and kitkat
Click to expand...
Click to collapse
For my country Malaysia..firmware XXUFNI4 4.4.2..i think it already patched that syndrome. ..how much emmc cost at ur country?
paranoidisc said:
For my country Malaysia..firmware XXUFNI4 4.4.2..i think it already patched that syndrome. ..how much emmc cost at ur country?
Click to expand...
Click to collapse
No idea bro.I got tired of the issues of my phone so sold it and bought a LeEco Le1s
vishal1286 said:
No idea bro.I got tired of the issues of my phone so sold it and bought a LeEco Le1s
Click to expand...
Click to collapse
Bro I did the same...
Sent from my Le X507 using Tapatalk
Related
any one help me ............... after install stock firmware in device ........... after reboot
some error and can't start my device only reboot/samsung boot animation............
error is:
Multi-CSC update
multi csc update failed ......
can't mount crc/system........(quick massage )
E: cache mount ...................
i try to flash 15 time but all time same error ...........
___________________________________________________
i used some firmware to flash ...but this time some error
Flash stock pda+modem+csc
Sent from my GT-S5360 using XDA
Chucrute said:
Flash stock pda+modem+csc
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
yes i'm flash 3 file but some error......
Sent from my GT-S6102 using xda premium
error is
Applying Multi-CSC
E: failed to mount /efs (invalid argument)
E: check_selective_file:Can´t mout /efs
E:can't copy ..*log can't mount chace
Wipe data and cache. Make sure you flash the latest version. And also that you have the complete downloaded file.
Raol Emostar said:
Wipe data and cache. Make sure you flash the latest version. And also that you have the complete downloaded file.
Click to expand...
Click to collapse
old ver working but new firmware not wirking.......
Sent from my GT-S6102 using xda premium
manoranjan2050 said:
old ver working but new firmware not wirking.......
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
Try the DDLE1 from doky73 thread..
Sent from my GT-S5360 using xda premium
manoranjan2050 said:
old ver working but new firmware not wirking.......
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
Which firmware doesn't work? Report it to Doky. Flash an older version and update your phone OTA. Settings>About Phone>Software Update>Update.
try redownloading the file, maybe it got corrupt while you downloaded it
the firmware you downloaded is corrupt!
i have experienced this before, just redownload the FW and flash again
Advise: Even if you flashed a million times, if you flashed a corrupt file, it will never be fixed
ronnieryan said:
the firmware you downloaded is corrupt!
i have experienced this before, just redownload the FW and flash again
Advise: Even if you flashed a million times, if you flashed a corrupt file, it will never be fixed
Click to expand...
Click to collapse
may be u r right friend........thanks friend
2 time this firmware worked for me........but now what hapend .......
I redownload it friend........
BTW i converted 3 file using dock73 tools .......... what in wipe package or nowipe package.......
Sent from my GT-S6102 using xda premium
thanks..............
ronnieryan said:
the firmware you downloaded is corrupt!
i have experienced this before, just redownload the FW and flash again
Advise: Even if you flashed a million times, if you flashed a corrupt file, it will never be fixed
Click to expand...
Click to collapse
Thanks friend u r 1000000000000 % right.....
my firmware corrupted .......
i'm new convert using doky73 tools....
now worked fine ....
many many thanks friend........
ronnieryan said:
the firmware you downloaded is corrupt!
i have experienced this before, just redownload the FW and flash again
Advise: Even if you flashed a million times, if you flashed a corrupt file, it will never be fixed
Click to expand...
Click to collapse
Perhaps OP has low bandwidth and somewhere along the download process it was interrupted and end up getting corrupted file.
+1 for a million times!
manoranjan2050 said:
Applying Multi-CSC
E: failed to mount /efs (invalid argument)
E: check_selective_file:Can´t mout /efs
E:can't copy ..*log can't mount chace
Click to expand...
Click to collapse
what is the solution if this error appears I am not able to use my Galaxy S2??
mukesh jassal said:
what is the solution if this error appears I am not able to use my Galaxy S2??
Click to expand...
Click to collapse
read the whole thread..
Sent from my Android System using Busybox Command.
My work
========================
- AndroBot SGY tweaks
- Nandroid md5 Fixer
- Ext4 to RFS Converter
- (CWM) kernel.tar Installer
- (CWM) Firmware Installer
Yup monoranjan slow internet is a problem in odosha¡¡
Please press thanx if I am useful to you
Dont Cry!
:laugh: You are like me dude! I was just trying to install the custom rom that I just customized and when I was flashing it my phone got stuck and got bricked! So I cried a few days and then 1 final day I got to know about flashing firmware through Odin on XDA! CSC Update Fail is quite common these days! Google your problem
help me m stuck
TheDeadEnd said:
:laugh: You are like me dude! I was just trying to install the custom rom that I just customized and when I was flashing it my phone got stuck and got bricked! So I cried a few days and then 1 final day I got to know about flashing firmware through Odin on XDA! CSC Update Fail is quite common these days! Google your problem
Click to expand...
Click to collapse
flashed galaxy y duos as i wanted stock rom.
xda developers pages helped me to flash through CWM recovery
i made recovery before flashing
but now when i BOOT
m watching
samsung galaxy y duos screen
which never ends for whole day
unable to go in recovery menu
unable to get phone loaded
just into that screen :'(
help me
vishalgaur789 said:
flashed galaxy y duos as i wanted stock rom.
xda developers pages helped me to flash through CWM recovery
i made recovery before flashing
but now when i BOOT
m watching
samsung galaxy y duos screen
which never ends for whole day
unable to go in recovery menu
unable to get phone loaded
just into that screen :'(
help me
Click to expand...
Click to collapse
I answered your question dude.
Do not repost
If you are unable to find the thread here it is http://forum.xda-developers.com/showthread.php?t=1465800
Read the second post for all the instructions. Do not repost same things again.
A Hero Can Be Anyone.
help me
manoranjan2050 said:
may be u r right friend........thanks friend
2 time this firmware worked for me........but now what hapend .......
I redownload it friend........
BTW i converted 3 file using dock73 tools .......... what in wipe package or nowipe package.......
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
flashed galaxy y duos as i wanted stock rom.
xda developers pages helped me to flash through CWM recovery
i made recovery before flashing
but now when i BOOT
m watching
samsung galaxy y duos screen
which never ends for whole day
unable to go in recovery menu
unable to get phone loaded
just into that screen :'(
help me
flashing firmware through Odin
is also stuck on downloading screen plzzzz rply sm1 plzzzz
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
jeedjaad said:
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
Click to expand...
Click to collapse
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
gee2012 said:
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
Click to expand...
Click to collapse
Nope,didnt fix it.Still gt-n7100 missing.Strange
edit :we may have the solution today
as i9000 looking the issue
gee2012 said:
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
Click to expand...
Click to collapse
I did it but still have problem, thank you
jeedjaad said:
I did it but still have problem, thank you
Click to expand...
Click to collapse
Read my post.The one above yours.It has to do with the param.bin you flashed with the rom.
Sent from the Beast
afilopou said:
Read my post.The one above yours.It has to do with the param.bin you flashed with the rom.
Sent from the Beast
Click to expand...
Click to collapse
What do you mean? I must to find param. bin from where?
Thank you
jeedjaad said:
What do you mean? I must to find param. bin from where?
Thank you
Click to expand...
Click to collapse
Waiting for the "correct" param.bin file from the developer "as i9000" to make it odin flashable.I'll tell him to post the .tar file here and of course he takes the credits
afilopou said:
Waiting for the "correct" param.bin file from the developer "as i9000" to make it odin flashable.I'll tell him to post the .tar file here and of course he takes the credits
Click to expand...
Click to collapse
Waiting from now
jeedjaad said:
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
Click to expand...
Click to collapse
Splash screen picture is in sboot.bin,use odin to flash.
:laugh:
Chenglu said:
Splash screen picture is in sboot.bin,use odin to flash.
:laugh:
Click to expand...
Click to collapse
And where can i find the sboot.bin? And obviously must extracted from a "correct" phone?
afilopou said:
And where can i find the sboot.bin? And obviously must extracted from a "correct" phone?
Click to expand...
Click to collapse
Some ota package include sboot.bin,I don't remember which package.
Chenglu said:
Some ota package include sboot.bin,I don't remember which package.
Click to expand...
Click to collapse
Ok i am lucky:laugh: This OTA contains sboot.bin http://www.hotfile.com/dl/171832975/c3ae1fa/GT-N7100_N7100XXALIA-OTA-N7100XXALI8_XEF_110010085.zip.html
It is for XEF (France) ...
Is it easy for you to make a pc odin flashable file? please?
afilopou said:
Ok i am lucky:laugh: This OTA contains sboot.bin http://www.hotfile.com/dl/171832975/c3ae1fa/GT-N7100_N7100XXALIA-OTA-N7100XXALI8_XEF_110010085.zip.html
It is for XEF (France) ...
Is it easy for you to make a pc odin flashable file?
Click to expand...
Click to collapse
Downloading....
Md5: De52f4a17beee792db2c46f2b87e6d85
sha1: 24fa696a4ac81b97eb0206ac41709bdce8f4d247
crc32: E99875c3
Chenglu said:
Md5: De52f4a17beee792db2c46f2b87e6d85
sha1: 24fa696a4ac81b97eb0206ac41709bdce8f4d247
crc32: E99875c3
Click to expand...
Click to collapse
in pc odin to bootloader slot or to pda slot?
afilopou said:
in pc odin to bootloader slot or to pda slot?
Click to expand...
Click to collapse
bootloader or pda.
Chenglu said:
bootloader or pda.
Click to expand...
Click to collapse
Once again you did it....I hate you :laugh::laugh::laugh::laugh::laugh::laugh:
You are a scholar and gentleman
Also my big thanks to as i9000 these 2 days
Thank you guys
thank you community
afilopou said:
Once again you did it....I hate you :laugh::laugh::laugh::laugh::laugh::laugh:
You are a scholar and gentleman
Also my big thanks to as i9000 these 2 days
Thank you guys
thank you community
Click to expand...
Click to collapse
:good:
Ohhhh, thank you so much to Chenglu and afilopou.
So I follow this or not.
Flash stock rom before then flash bootloader.tar, is it right?And put this file in bootloader , yer or not?
Again, can you tell me what I did wrong so had the problem?
I want to know because I don't want it happen again.
Last time I used pc odin v3.07 Flash stock root odex LJ1 , everythings pass and reset but when phone reboot I saw splash screen changed.
jeedjaad said:
Ohhhh, thank you so much to Chenglu and afilopou.
So I follow this or not.
Flash stock rom before then flash bootloader.tar, is it right?And put this file in bootloader , yer or not?
Again, can you tell me what I did wrong so had the problem?
I want to know because I don't want it happen again.
Last time I used pc odin v3.07 Flash stock root odex LJ1 , everythings pass and reset but when phone reboot I saw splash screen changed.
Click to expand...
Click to collapse
Thanks to Chenglu.My part is that i chase him up
Even with the rom you are using now just put your phone in download mode and flash with pc odin the bootloader.tar
I put it in bootloader slot but you can put it in pda slot as well.
You did nothing wrong.Looks that the stock root rom we flashed had "wrong" sboot.bin
Sent from the Beast
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Rihis said:
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Click to expand...
Click to collapse
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Allready tried
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Dude i allready tried that 3 times ;(
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
One more thing
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Would it matter if i had disabled usb debug before the brick happened ?
Rihis said:
Would it matter if i had disabled usb debug before the brick happened ?
Click to expand...
Click to collapse
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Don't have TWRP or CWM
shine911 said:
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Can you tell me how?
forgottnxd said:
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Please can you tell me how to enable temp cwm ? i am a complete noob and really want to get my phone back.
Rihis said:
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Click to expand...
Click to collapse
You can copy cwm (the zip file) to the external card and rom cook try flash rom cook via cwm.
Sent from my GT-I8160 using xda premium
Give it to Samsung.
loof13 said:
Give it to Samsung.
Click to expand...
Click to collapse
Easy and simple way!
Sent from my GT-I8160 using xda premium
Seriously?
shine911 said:
Easy and simple way!
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Rihis said:
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Click to expand...
Click to collapse
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
I dont thing it will work dude
loof13 said:
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
Click to expand...
Click to collapse
The problem is, I am in Latvia and i dont think people here would'nt check the counter. Do you know any cwm flashable rom that could finally let me have my phone back ??
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Any rom ?
Rikxzdjz said:
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Click to expand...
Click to collapse
But what do i flash in cwm ? I dont think you can flash a .md5 in recovery
Md5 ? CWM backup files ? Yes u can ...
-Create a new file "clockworkmod"
-Move ur CWM Backup files to Clockworkmod folder
-Open CWM
-Restore
Search Before POSTING
http://forum.xda-developers.com/showthread.php?t=2000417 Q and A Thread !
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
Rihis said:
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Click to expand...
Click to collapse
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Master-ZizO said:
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Click to expand...
Click to collapse
Thanks dude!!! (Can any mod close this thread???)
Hi All
My note 2 died :'(
i was flashing Phoenix Rom and my device died
after that he doesn't want to open anything, what i only can open "download mode"
i tried to flash stock firmware using odin, i get error that no partitions :'(
i searched and downloaded .pit file and tried re-partition also using odin, i get error re-partition operation failed :'(
What 2 do :'(
help please
reserved
Try flashing PhilzTouch recovery thru ODIN in download mode and from there wipe everything possible (extract external SD card first) and then flash any ROM you would like. Good luck, monitoring thread.
Mudahuda said:
Try flashing PhilzTouch recovery thru ODIN in download mode and from there wipe everything possible (extract external SD card first) and then flash any ROM you would like. Good luck, monitoring thread.
Click to expand...
Click to collapse
still need a .pit file
the message i get after doing what u told me to do :'(
"There is no PIT partition."
da_omen said:
still need a .pit file
the message i get after doing what u told me to do :'(
"There is no PIT partition."
Click to expand...
Click to collapse
What do you see in download mode? It tells you the phone model? Searching for a PIT file...
Found something: http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 "DOWNLOAD_N7100XXDLJ2_OXA_FACTORY" Has a PIT file in case PIT is damaged.
Mudahuda said:
Try flashing PhilzTouch recovery thru ODIN in download mode and from there wipe everything possible (extract external SD card first) and then flash any ROM you would like. Good luck, monitoring thread.
Click to expand...
Click to collapse
Mudahuda said:
What do you see in download mode? It tells you the phone model? Searching for a PIT file...
Found something: http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 "DOWNLOAD_N7100XXDLJ2_OXA_FACTORY" Has a PIT file in case PIT is damaged.
Click to expand...
Click to collapse
Thanks but it looks like all links are hotfile.com and it was banned
Wow, sorry I didn't check. You could ask the dev to reupload only the PIT file for you. Meanwhile I will try to find another one. Guys at sammobile should have one.
Here, hope this helps: https://www.dropbox.com/s/58casphsbe9p28e/N7100_Mx-MDM_t03g.rar
Good luck
Sent from my GT-N7100 using xda app-developers app
Mudahuda said:
Wow, sorry I didn't check. You could ask the dev to reupload only the PIT file for you. Meanwhile I will try to find another one. Guys at sammobile should have one.
Here, hope this helps: https://www.dropbox.com/s/58casphsbe9p28e/N7100_Mx-MDM_t03g.rar
Good luck
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
thanks will try
da_omen said:
thanks will try
Click to expand...
Click to collapse
what is the password o the file
Please guyz someone help me.... my phone (gt s6812) got stuck in boot loop after installing a custom kernel (this one http://forum.xda-developers.com/showthread.php?t=2760281)
also when i try to flash stock firmware which i have downloaded from sammobile i got md5 hash error .. can someone tell me what should i do???
Try to factory reset. Well you cant flash stock rom using cwm. Ask this question from dev of the kernal
Sent from my GT-I9001 using Tapatalk 2
zaidrpm said:
Try to factory reset. Well you cant flash stock rom using cwm. Ask this question from dev of the kernal
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
well I have tried flashing it via odin.Also factory reset do not work . tried to wipe cache and davlik even...
when the kernel is not tested and not working correct,please don't install without nandroid backup -_-
faizauthar12 said:
when the kernel is not tested and not working correct,please don't install without nandroid backup -_-
Click to expand...
Click to collapse
what should i do now ?? well i have a backup made via cwm but its .tar and would it work??
svapre said:
well i have a backup made via cwm but its .tar and would it work??
Click to expand...
Click to collapse
yes, it will work, just put that backup in ur sd card and from CWM do restore, and ur phone will boot
Thanks guys it helped me thankyou very much...:laugh::good:
hey..
svapre said:
Please guyz someone help me.... my phone (gt s6812) got stuck
i gave a solution about this issue already...
Click to expand...
Click to collapse