So, i have 2 different vehicles that have Bluetooth calling. When i get in my car, the vehicle connects to my phone and i can make and receive calls through the car and the sound goes through the speakers. Now that my watch is connected as a calling device with the new speaker activated, my vehicles will not connect to my phone. The only i can think of around this is to disable the Bluetooth or enable airplane mode on the watch which is a real pain every time i get it my car. Anyone else have this issue and a solution?
Same here, the car will connect to the phone but will then disconnect. This keeps repeating. If I turn watch off, car connects to phone OK.
Sent from my SM-G928F using Tapatalk
Oh, that's bad! But it's somehow also logical. The phone can only be connected to one handsfree/handset device at a time. Even so the car audio is the better choice, the phone does not know this, and will just stay connected to the watch.
Have you tried to connect to the car audio by the BT menu on the smartphone? You car audio is listed under paired devices and you can connect to it manually.
Maybe it will also remember this decision.
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Just searched a bit on the internet. The problem is not new, as people with headsets and a BT car stereo experienced the same problems in the past, so maybe there is already a solution for this. I quickly searched and found a potential solution by apps, that manage the BT connection and offer prioritization, like this one claims to be capable of: https://play.google.com/store/apps/details?id=org.myklos.btautoconnect
Maybe this is also something you may investigate into.
I'm very interested on a solution, because I drive a lot of rental cars and I usually connect my phone to the car stereo (if available).
Completely disconnecting the watch is not an option for me, as one reason for buying the watch was to get quick notifications also when I'm in the car.
foo said:
Oh, that's bad! But it's somehow also logical. The phone can only be connected to one handsfree/handset device at a time. Even so the car audio is the better choice, the phone does not know this, and will just stay connected to the watch.
Have you tried to connect to the car audio by the BT menu on the smartphone? You car audio is listed under paired devices and you can connect to it manually.
Maybe it will also remember this decision.
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Just searched a bit on the internet. The problem is not new, as people with headsets and a BT car stereo experienced the same problems in the past, so maybe there is already a solution for this. I quickly searched and found a potential solution by apps, that manage the BT connection and offer prioritization, like this one claims to be capable of: https://play.google.com/store/apps/details?id=org.myklos.btautoconnect
Maybe this is also something you may investigate into.
I'm very interested on a solution, because I drive a lot of rental cars and I usually connect my phone to the car stereo (if available).
Completely disconnecting the watch is not an option for me, as one reason for buying the watch was to get quick notifications also when I'm in the car.
Click to expand...
Click to collapse
just disable in the bluetooth settings of the watch on the phone the "phone audio" and it works fine again.
Had the same problem that my car connected to my phone and played music, but the calls were still connected with my watch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah, but if you disable on the watch, you can't use the speaker that was just activated on the watch to make calls.
I actually found a program called triggers that will disconnect the watch and allow the car to connect.
same issue with bt headphones. Kinda annoying.
Motawa88 said:
same issue with bt headphones. Kinda annoying.
Click to expand...
Click to collapse
Kinda annoying? This should have never left Google like this.
Maybe this googled answer will help: http://superuser.com/questions/3979...tooth-connection-priority-for-various-devices
Scott said:
Maybe this googled answer will help: http://superuser.com/questions/3979...tooth-connection-priority-for-various-devices
Click to expand...
Click to collapse
I tried that. Doesn't help if you are already connected to the watch and get in your car.
Apple watch doesn't have this problem. Google really need to fix this.
Sent from my SM-G928F using Tapatalk
Yes, I have this problem too. I will try to play with BT priority, maybe it will help.
So I tried using triggers and it worked to activate my car bluetooth. However, the sound does not go through my car stereo. I went in and had to disable phone calling on the watch bluetooth in my phone to get my car to work correctly. It sucks to have a speaker on a watch and you can't even use it to make calls because it interferes with other devices. I think the basic fix for this is to have a widget or shortcut on the Watch to enable airplane mode when you get into your car. Right now you have to go into settings and scroll through to get to airplane mode.
All I have to do is pull down the quick settings and choose my cars Bluetooth instead of the watch and it switches just fine
yes, priority do not work.
mgorman said:
All I have to do is pull down the quick settings and choose my cars Bluetooth instead of the watch and it switches just fine
Click to expand...
Click to collapse
This works for me also. For those having the issue here is one option. Use tasker and secure settings plugin. Create a profile in tasker to monitor BT near. Choose your cars BT. Create a task that uses secure setting plugin to connect to cars Bluetooth. Once done whenever your phone sees the cars BT it will connect. Rooting is not necessary.
Sent from my Nexus 6 using Tapatalk
crawrj said:
This works for me also. For those having the issue here is one option. Use tasker and secure settings plugin. Create a profile in tasker to monitor BT near. Choose your cars BT. Create a task that uses secure setting plugin to connect to cars Bluetooth. Once done whenever your phone sees the cars BT it will connect. Rooting is not necessary.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I used tasker and triggers to get my car to connect to my phone. The problem is, as long as bluetooth is enabled for the watch, i don't get sound through my car. I have to actually disable the watch to get sound to work.
dschachm said:
I used tasker and triggers to get my car to connect to my phone. The problem is, as long as bluetooth is enabled for the watch, i don't get sound through my car. I have to actually disable the watch to get sound to work.
Click to expand...
Click to collapse
I'm not having that problem. Might try with secure settings to see if you get a different result. If not it must be a phone or car head unit thing.
Sent from my Nexus 6 using Tapatalk
crawrj said:
This works for me also. For those having the issue here is one option. Use tasker and secure settings plugin. Create a profile in tasker to monitor BT near. Choose your cars BT. Create a task that uses secure setting plugin to connect to cars Bluetooth. Once done whenever your phone sees the cars BT it will connect. Rooting is not necessary.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
dschachm said:
I used tasker and triggers to get my car to connect to my phone. The problem is, as long as bluetooth is enabled for the watch, i don't get sound through my car. I have to actually disable the watch to get sound to work.
Click to expand...
Click to collapse
It seems that bluetooth near is actually working. I never even knew that existed. Hope it continues. Thanks
Can anyone give me a newbies guide to what you're talking about with triggers and tasker and how to configure?
I'm aware of tasker and have used it a long time ago when I used to root my Android devices, but I'm not entirely sure about the config nowadays especially for this kind of thing.
thisispete said:
Can anyone give me a newbies guide to what you're talking about with triggers and tasker and how to configure?
Click to expand...
Click to collapse
+1
Sent from my SGH-I747M using XDA Free mobile app
Related
Just got my new AT&T Galaxy Note 2 yesterday and tried it out with my BT headsets and car stereo . Only one was able to pair successfully . It was my old Motorola S9 headsets. My Senheiser headphones would not even show up as a device . My Valor car stereo would show up as a device , but wouldnt pair. I never had this problem with my iphone . Really need this feature to work with all my devices. Anybody have any solutions ?
I notice a BT issue with my Kenwood Receiver in my truck. The BT goes in and out sometimes and sometimes it just play through. Pretty weird! My Note never had these issues...
Kingdombuilder said:
I notice a BT issue with my Kenwood Receiver in my truck. The BT goes in and out sometimes and sometimes it just play through. Pretty weird! My Note never had these issues...
Click to expand...
Click to collapse
I have the same issue, this morning I was using my motorola BT headphones and my signal would go in and out. It happened more when my phone went to sleep, once i pressed the home button the connection was restored.
Im going to have to look at the condituon in which it switches off to see if I can confirm that. However when I would first get in my truck and connect it wiuld act funny. I would press play on my device and there would be no sound. Then I would press play on the receiver and sometimes it would play. Then I would turn the BT off and back on from my phone and it might work good for a stretch. I did notuce when it would act up and I try and force connect from my reciever I would get an error on the reciever.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Yall r making sure that your not trying to connect multiple devices to the same bluetooth service right?
After that, try a bluetooth paring tool
I had to get one so my bluetooth keyboard would map corectly
After that, try root, and a rom with the android bluetooth stack instead of the samsung one.
Sent from my SGH-T889 using Tapatalk 2
Mine won't pair with the Pioneer in my truck. Says automatic pairing failed. When I go to bluetooth settings in the Pioneer, then it connects. Two other Android phones work perfectly.
Try clearing the settings. Try a bluetooth antena fixer
Sent from my SGH-T889 using Tapatalk 2
Im having the same problem with an Alpine 133BT. it will work, then Ill get out of the car for a while. Ill then get back in and it will see the phone but bluetooth will not work.
This has me worried, hope it works in my car when I get my note 2 on thursday. If its the same stack that was in the Galaxy S2 Skyrocket then that worked for me.
Does it support SMS over bluetooth?
prepaidguy9081 said:
Yall r making sure that your not trying to connect multiple devices to the same bluetooth service right?
After that, try a bluetooth paring tool
I had to get one so my bluetooth keyboard would map corectly
After that, try root, and a rom with the android bluetooth stack instead of the samsung one.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Yes one device at a time with other turned off. I will keep looking into it after getting back from Vacation. Thanks
Problems here too after none with note 1. Factory 2011 subaru impreza radio with bt streaming. Every time I leave the car and restart, the wheel controls no longer work, I have to reboot the phone to fix it. Every once in a while it skips. A reset also cures that fwiw. I'd love to find a solution!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
prepaidguy9081 said:
Yall r making sure that your not trying to connect multiple devices to the same bluetooth service right?
After that, try a bluetooth paring tool
I had to get one so my bluetooth keyboard would map corectly
After that, try root, and a rom with the android bluetooth stack instead of the samsung one.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
In my truck I only have one device connected. It will connect right away but after about 15 seconds of initial playing music the bluetooth on my truck receiver cuts off then it comes back and connect again and then I have to push play again to get it to play. It is very weird. Sorry I don't flash roms, but I am rooted so that I could freeze the bloatware and bluetooth my PS3 Controller with my device. I wonder if the bluetooth version in my truck is conflicting with the updated bluetooth version on the phone. Just a thought, I'm not too keen on a lot of this stuff.
Kingdombuilder said:
In my truck I only have one device connected. It will connect right away but after about 15 seconds of initial playing music the bluetooth on my truck receiver cuts off then it comes back and connect again and then I have to push play again to get it to play. It is very weird. Sorry I don't flash roms, but I am rooted so that I could freeze the bloatware and bluetooth my PS3 Controller with my device. I wonder if the bluetooth version in my truck is conflicting with the updated bluetooth version on the phone. Just a thought, I'm not too keen on a lot of this stuff.
Click to expand...
Click to collapse
Rom is the only way I know to change the stack.
You dont flash? Well to each his own I guess. Me I like updates n bloatware removal, custum kernels, and the carrier out of my business.
Your problem sounds like its your radio not your phone. That goes for the quoted person here.
For everyone. If your radio worked with another fone but not this one. Prolly the bluetooth stack. Prolly that ur bluetooth in ur radio is old.
This is why I do not support or buy radios with bluetooth built in
Search ebay "bluetooth 3.5mm receiver" the lil usb powered dongal with a headphone plug is what I use. Works like a charm
Sent from my SGH-T889 using Tapatalk 2
prepaidguy9081 said:
Rom is the only way I know to change the stack.
You dont flash? Well to each his own I guess. Me I like updates n bloatware removal, custum kernels, and the carrier out of my business.
Your problem sounds like its your radio not your phone. That goes for the quoted person here.
For everyone. If your radio worked with another fone but not this one. Prolly the bluetooth stack. Prolly that ur bluetooth in ur radio is old.
This is why I do not support or buy radios with bluetooth built in
Search ebay "bluetooth 3.5mm receiver" the lil usb powered dongal with a headphone plug is what I use. Works like a charm
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Well I took a leap and flashed a rom HERE - Multi Window Control. AT&T Note 2 dod not come with MWC. Ifound when I flashed this rom there was no difference. I bet the issue is the out dated Radio as you said. It is probably 4 to 5 years old with a bluetooth dongle that plugs into it. Maybe this Kenwood receiver will allow me to use another aftermarket BT dongle. It would be worth the research.
Here is my reciever so you will have a better understanding.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For whatever reason it would not let me insert the image in the post above. But you can see here the BT dongle. Without this the BT will not work. Maybe it is not brand specific. I will check into it and see what happens.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Since starting this thread , I have run into problems by getting myself into a boot loop . After 3 days of reading every post to get my phone up and running again on stock firmware, I found only 1 solution that worked for me . Happy as can be , O thought would try out the BT on my car stereo again , and low and behold it worked . SO , if your saying the BT in your behicle is old , that may be true , but there are other tweaks that you should be able to make on your device to get it to work . My car stereo is a Valor , which was a cheap 2 din touch screen with BT /usb/sdcard . all the fixins for under $300 . I guess you get what you pay for . Good luck .
Buckeyeken said:
Since starting this thread , I have run into problems by getting myself into a boot loop . After 3 days of reading every post to get my phone up and running again on stock firmware, I found only 1 solution that worked for me . Happy as can be , O thought would try out the BT on my car stereo again , and low and behold it worked . SO , if your saying the BT in your behicle is old , that may be true , but there are other tweaks that you should be able to make on your device to get it to work . My car stereo is a Valor , which was a cheap 2 din touch screen with BT /usb/sdcard . all the fixins for under $300 . I guess you get what you pay for . Good luck .
Click to expand...
Click to collapse
What kind of tweaks bro? I did notice that today when I initiate the music from my receiver instead of my phone it did not cut off, strange!
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
I can say only that after I had the boot load problem and installed the other tar files I found here , it started working for me . Cant say that was what did it , but you never know . I hate those BT dongles . Bought one for my New HP Pavilion and it didnt work at all .
I have my AT&T Note II non-rooted and it pairs fine with my JayBird Freedom Sprint Headset and my 2009 Mercedes truck. No issues so far all features work as expected.
Buckeyeken said:
I can say only that after I had the boot load problem and installed the other tar files I found here , it started working for me . Cant say that was what did it , but you never know . I hate those BT dongles . Bought one for my New HP Pavilion and it didnt work at all .
Click to expand...
Click to collapse
What .tar files are you talking about? Someone might need help and explaining what tar files you used would be helpful!
Quick question whether there is an app, mod, or even build.prop edit that would allow my Note II to automatically try to connect to my car's single din Kenwood KDC‑BT952HD. Only thing the head unit tries to do when connected is re-download contacts, but it turns on as soon as my car turns on and it'd be a lot faster if my Note automatically attempted to connect to the head unit instead of the bluetooth popup with listed devices, which I don't even have considering I'm running Whompasaurus V2.9. so if there's any way I could even get the pop up that'd be great too!
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
I'm new to tasker and I'm not sure how to enable the auto-connect through tasker.
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
maybe I'm missing something here, so may suggestion by be complete off.
Maybe leaving BT tunred on your GN2 before you get in your car. Or turned it on before you get in the car. I'm assuming the ROM you're using has a BT toggle. The thinking is that your headunit will try to automatically connect to any paired BT devices. If so, the GN2 should automatically connect when the deck does it's search.
This works for me when I try connecting to Jawborn Big Jambox or Jawbone Era or other BT devices I have paired on my GN2. It may be worth nothing I'm on a deoxidized stock rom. But I this also worked when I ran AOSP roms on my Evo 4G such as CM.
If the headunit does not do a pair device search and connect when it turns on, then I would definitely try suggest above. I have no clue, and that's better than nothing.
no autoconnect on GN2
Once you had a BT connection with your car and leave it at the gas station e.g. it won't reconnect when you're back!
Sad, but since then I tried the mighty Tasker and similar apps, but was happy with the app called "Bluetooth Auto Connect".
You can define the simple trigger, when display on....
So whenever I get back into the car, I hit either the menu or start button, that's it. Without unlocking you are back connected.
The only other annoying thing that you might be able to fix with Tasker is, that right after the A2DP establishes the connection the player starts playing the last song, which I obviously don't want most of the time.
Also Play Pause Next etc over BT doesn't work too well on android.
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That's interesting, I always wonder what exactly secure settings does, but this example helps.
Sent from my SPH-L900 using xda premium
1FstYOTA said:
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Tasker worked for me
Skripka said:
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
[email protected] said:
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
Click to expand...
Click to collapse
Bluetooth autoconnect's main feature works for my xperia pro (turn on bluetooth, connect to your selected devices in automatic)
Bluetooth autoconnect's tasker plugin is not working for me. I can use it, sort off, but it does nothing. Like, "Press the button, but there was no reply!"
Well that is odd. I have a Pioneer unit and my phone connects to it as soon as it detects it in range. Even if I turn off BT and then power it on, the phone automatically connects to the head unit without any intervention on my part. Sounds like an issue with your stereo.
No stereo issue. On some of the touch wiz based roms bluetooth DOES NOT auto connect. On most (if not all) aosp roms bluetooth DOES auto connect. Currently on ma7 stock with root and it auto connects. When I was on whomp, jellybombed, and labrats
Sent from my SPH-L900 using Tapatalk 4 Beta
Bluetooth Connection
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
devilshady said:
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
Click to expand...
Click to collapse
not sure of your rom, but both TW and CM allow you to set whether each connection is Media or Phone. put your headset to phone and your car to media only. when you answer the phone the headset should take over.
Lord Sekhmet said:
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
Click to expand...
Click to collapse
Could you share how you did this? I am completely confused by the interface.
I am wanting the same setup but also for music player and Pandora
I haven't found an example to follow that even comes close.
---------- Post added at 09:54 AM ---------- Previous post was at 09:43 AM ----------
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That helps,
I was going task / setting / Bluetooth
Still not sure how to set the trigger however.
[EDIT]
The first few minutes of that video answered my questions.
Sorry, I partied late last night and still kinda loopy.
Sent from my Jedi MasterX Note 2
Hi everyone,
So I bought my HTC 10 a month ago.
Yesterday I took one of my cars, which I haven't driven for a long time, and tried to pair my phone with the car kit. For the record, I have a Parrot Mki9200 installed, since the car's kit did not have BT.
Now the weird part:
- I search the device - OK
- I pair the devices - everything still OK
-after that, it is supposed to instantly connect with the unit and then download my contacts. Long story short, it cannot connect, no matter what. I tried many times but all that happens is I keep waiting until I get an error from the phone " unable to connect" and then something like "make sure that your devices are one, etc".
I could really use some help on this. I even made a factory reset on the Bluetooth unit just to eliminate any conflicts. I called the authorized service in my country and they told me it should be a problem with the phone.
The weird thing is that my M8 connects flawlessly (on Android 6.0), so does a Huawei P9 lite on Marshmallow, so do all the other devices.
Any help?? The last thing I want is to make a factory reset on the phone and make no difference whatsoever.
Is there any way to reset the BT settings on the phone without factory reset? Any other way to fix it or even find the cause?
FYI, on 1.90 firmware currently, no root.
Any help will be highly appreciated, since I cannot imagine what else I can do with a new phone and no option to connect it in my car.
Thanks in advance,
Cheers,
Thanos
Sent from my HTC 10 using Tapatalk
Nobody???
This is what I am getting btw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC 10 using Tapatalk
I had the same problem with pairing the device with my sony srs-x5 bt speaker.Got no luck,tried cleaning dat and cache,didn't help;and did a factory reset.Taht fixed it.This happened to me once on stock rom,now I am on custom without any connection problems.
Did you pair it without problem but was not able to connect??
Thnx
Sent from my HTC 10 using Tapatalk
thanito said:
Did you pair it without problem but was not able to connect??
Thnx
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Yes,it was paired but not connected.I got the same error message.
ordeniz said:
Yes,it was paired but not connected.I got the same error message.
Click to expand...
Click to collapse
A few hours ago I finally found the culprit of the problem, just to let anyone know if they have the same issue.
When you are requested to enter the pairing PIN, a bit below there is an option to allow the BT unit to download the contacts, which is selected by default as always.
All phones never have a problem with that.
Anyhow, this time I deselected this option and guess what, it instantly connected!
Afterwards I selected again this option in settings and now everything works like a charm, it connects instantly every time and the contacts are properly synced.
Best regards,
T.
Sent from my HTC 10 using Tapatalk
Hi thanito,
Thanks for the hint ! I had the same problem, your comment was very helpful, I could connect my phone. Although phone works fine and contact are correctly synced, I'm not able to connect the device in Media Audio mode.
The Bluetooth in the car shows "Audio connected". In the device I see only Phone Audio and Contact Sharing. I unpaired and paired it again unsuccessfully.
Do you have an idea how to correct the problem?
Thanks for your help
Fred
Do you have the same car kit unit? Did you try to enter the settings of the paired device and select media audio?
Sent from my HTC 10 using Tapatalk
thanito said:
Do you have the same car kit unit? Did you try to enter the settings of the paired device and select media audio?
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi, yes is the same car kit. It went suddenly wrong, I didn't change any settings. I tried to unpair and pair it many times.
When I'm pairing the device I can't select media audio. I'm only asked if I agreed to sync the contacts.
Something strange: when I get a call whatsapp, Soma or Google Duo, I can hear it trough the car Bluetooth for few second then it cuts.
I don't see how to add the Media Audio to a paired device.
Moreover, I don't have Media Audi problem when I connect the HTC10 to the MINI Bose Bluetooth. It works perfectly
Car kit works properly with my Samsung S6 Edge: Phone Audio, Audio Media & Contact sync.
FredMD11 said:
Hi, yes is the same car kit. It went suddenly wrong, I didn't change any settings. I tried to unpair and pair it many times.
When I'm pairing the device I can't select media audio. I'm only asked if I agreed to sync the contacts.
Something strange: when I get a call whatsapp, Soma or Google Duo, I can hear it trough the car Bluetooth for few second then it cuts.
I don't see how to add the Media Audio to a paired device.
Moreover, I don't have Media Audi problem when I connect the HTC10 to the MINI Bose Bluetooth. It works perfectly
Car kit works properly with my Samsung S6 Edge: Phone Audio, Audio Media & Contact sync.
Click to expand...
Click to collapse
Check the photo attachments to see the option in settings ?
Sent from my HTC 10 using Tapatalk
thanito said:
Check the photo attachments to see the option in settings
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi,
See my picture: Audi... = Car Kit, MINI Bose = Music Bluetooth player.
In the options for the paired Audi, I don't have Media Audio and can't select this option. few weeks ago it was ok and suddenly, the Media Audio option disappeared. I can't set it again.
FredMD11 said:
Hi,
See my picture: Audi... = Car Kit, MINI Bose = Music Bluetooth player.
In the options for the paired Audi, I don't have Media Audio and can't select this option. few weeks ago it was ok and suddenly, the Media Audio option disappeared. I can't set it again.
View attachment 3866658
Click to expand...
Click to collapse
I see..
Did you try unpairing/deleting stored device from both devices?
Usually in factory car kits you get the option to delete the paired device from the memory.
When done, try to find again the phone from the car kit or the car kit from the phone, uncheck the option for the contacts, then recheck it and hope that you are asked to allow media audio access, contact access, etc. I remember that I am prompted for these every time I pair the phone with a new BT device
Sent from my HTC 10 using Tapatalk
thanito said:
I see..
Did you try unpairing/deleting stored device from both devices?
Usually in factory car kits you get the option to delete the paired device from the memory.
When done, try to find again the phone from the car kit or the car kit from the phone, uncheck the option for the contacts, then recheck it and hope that you are asked to allow media audio access, contact access, etc. I remember that I am prompted for these every time I pair the phone with a new BT device
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi, I tried all options, pairing/unpairing/deleting devices, etc... no way.
I finally decided to reset (factory) my phone HTC10...
Now it works fine, Phone Audio, Media Audio & Contacts Sync options are visible and connected successfully...
Many thanks for your support
Still in process, this may not work for every remote, especially those will lost pairing after reboot, and I found some remote will disconnect after a few hours and need pairing again, dunno this is bug of shield or anything else
Tested on Sheid TV 16gb 2017, firmware 5.01 (developer)
1. side load this app to your shield: "nRF Connect for Mobile", or any BLE scanner/connect app
2.a scan the remote and press connect
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.b when connected, shield tv will ask for pairing
2.c paired and connected but it still not work
3.a adb pull /data/misc/bluedroid
3.b you will see a list of paired device in bt_config.conf, include the 3rd party remote but it will lack most info
Code:
[XX:XX:XX:XX:XX:XX]
Name = 小米蓝牙遥控器
DevClass = 1344
DevType = 2
AddrType = 0
Timestamp = 1486758640
LE_KEY_PENC = a27d02fb2083ba5847f1e4734XXXXXXXXXXXXXXX
LE_KEY_PID = 1731754feb64c60edcd09XXXXXXXXXXXXXXXXXX
LE_KEY_PCSRK = 00000000db21e99ab6XXXXXXXXXXXXXXXXXX
LE_KEY_LENC = ef8ac21724e8fc31837XXXXXXXXXXXXXXXXXX
LE_KEY_LCSRK = 00000000842e019dd2caXXXXXXXXXXXXXXXXXXX
LE_KEY_LID =
Service = 00001812-0000-1000-8000-00805f9b34fb
HidReport = 4d2a0101222e4d2a020122324d2a030122364d2a0002223a4d2ae00322454d2ae10322484d2ae203224b4d2ae303224e4d2ae40322514d2ae50322544d2ae60322574d2ae703225a4d2ae803225d4d2ae90322604d2aea0322634d2aeb032266
HidAttrMask = 0
HidSubClass = 0
HidAppId = 255
HidVendorId = 10007
HidProductId = 12800
HidVersion = 273
HidCountryCode = 0
HidSSRMaxLatency = 0
HidSSRMinTimeout = 0
HidDescriptor = 05010906a1018502050719e029e71500250175019508810295017508810195057501050819012905910295017503910195067508152825fe0507192829fe8100c0
[XX:XX:XX:XX:XX:XX]
Name = 小米蓝牙遥控器
DevClass = 7936
DevType = 2
AddrType = 0
Timestamp = 1486758704
LE_KEY_PENC = fe426d85f40053734a9eXXXXXXXXXXXXXXXXXXXXXXXXX
LE_KEY_LID =
Service = 00001812-0000-1000-8000-00805f9b34fb
3.c
now fill in the miss part, mainly the "Service", and HID part which you can omit some of them, and never change those key nor add any missing key. For service most of them will be "00001812-0000-1000-8000-00805f9b34fb "
It is suggest to copy these info from another device, I copy them from my HTC 10
beware of the order of those line, wrong order may will refuse to work
suggest to use some text editor support unix format (LF for new line) such as pspad
4. after modify push back to shield tv, reboot (I didn't try if turning on/off bt will work or not)
5. refer to this post for key mapping https://forum.xda-developers.com/shield-tv/general/change-3rd-party-remote-key-layout-root-t3548871
for china version of xiaomi box bt remote, 1st version bt remote which use CR2032 will need repairing after reboot and also will disconnect after about 1 day, but it can pair by shield tv, it will say cannot pair for 1st try, just don't touch the remote and let shield pair it again, it will pair mostly in 2~3 try
2nd version of this bt remote without voice (just $4 usd) , which us 2xaaa battery can be pair using the above method, sheild tv cannot search for it, it will not disconnect after shield tv reboot/power off, I am still testing it, hope it will not disconnect after a few hours of using.
Tmall bt voice remote same as xiaomi 1st version bt remote, and the power button is IR, voice will not work
Edit
Sorry, rereading your post, i see were not discussing the same issue, my apologies
Edit2
Although you may have giving me some places i could look into, like the config file locations, reviewing them before pairing, after pairing, and after loss of pairing, so thanks for that
Im having this similar issue on marshmellow full android
Im having no problems with seing and pairing devices, but the shield forgets the pairing when i turn off, then turn on the bluetooth, making me have to repair again, which when you have so many devices to pair becomes a pain.
Ive not tested extensively, but the pairing seems to stick, at least in the first instance of turning bluetooth on and off, as long as the bluetooth device was connected when i turn off the bluetooth
I can test this a bit more, like pair more then one device(ive only been pairing/testing one device at a time), keep one device connected, turn off the bluetooth, and see if the shield remembers all the pairings, or just the one that was still connected, when i turned off the bluetooth
I do hope a solution becomes available, as i rely quite extensively on the shields bluetooth
Researching up on it, seems theres a little issue with marshmallow and bluetoth but not this exact problem, so im stumped, this post, and another on zulus marshmellow thread are the only places ive seen mention of this particular pairing problem, the forgetting your pairings issue
http://www.videomap.it/forum/viewto...d=01cc9900293e5b3a59e3dba77a43f876&start=1000
Lukecastle
'hi zulu,
I was wondering why everytime I turn on the shield from a shutdown. I'd always have to pair my bluetooth devices. For some reason it doesnt remember the already paired devices. Thanks'
Tried to signup to that site to add to lukecastles post, but it wont let me, im a spambot apparently
banderos101 said:
I was wondering why everytime I turn on the shield from a shutdown. I'd always have to pair my bluetooth devices. For some reason it doesnt remember the already paired devices. Thanks'
Tried to signup to that site to add to lukecastles post, but it wont let me, im a spambot apparently
Click to expand...
Click to collapse
Your problem actually the same as some of my bt device and I don't have a solution, it may be a mix of the bt device firmware problem and the Shield bt, every time it happen I saw a GATT disconnect then device refuse to connect again. What I know is some of my device is fixed after a firmware update(the bt device).
Edit:
Saw some similar bug on nexus, may be they are related, need time to keep digging
DummyPLUG said:
Your problem actually the same as some of my bt device and I don't have a solution, it may be a mix of the bt device firmware problem and the Shield bt, every time it happen I saw a GATT disconnect then device refuse to connect again. What I know is some of my device is fixed after a firmware update(the bt device).
Edit:
Saw some similar bug on nexus, may be they are related, need time to keep digging
Click to expand...
Click to collapse
Dont know if this will be any help in your search, but theres a floating/popup/overlay logcat on the playstore called 'logcat extreme' that might be usefull, maybe give you some clues you may understand better then me.
I tend to pause the log, clear it, then unpause right before an action, in this case
1. Turning on bluetooth(with nothing paired) (pause, then save log)
2. Clear log, unpause, pair device, pause, save log
3. Clear log, unpause, turn off bluetooth, pause, save log
4. Clear log, unpause, turn on bluetooth(testing the pairing), pause, save log
Ill probably go over this again more thoroughly if more information comes out that helps me look out for something specific, perhaps this "GATT disconnect " that you speak off
The fact that this issue is happening on the nexus, as you say, seems to indicate that this is an issue with android itself, so im hoping, once xposed comes out for nouget, that this issue will be resolved when i update, which will be fun, seing as my adb/fastboot is not working........hoping flashfire app will do the job in this case, aswell as, hopefully, fix the adb/fastboot, but i digress
Edit
I have a very strong feeling that im gonna turn my device into a door stop when i eventually test/hope/hail mary with flashfire, a new shield purchase may be in my future just hope their still selling the 2015 model when/if i do
banderos101 said:
Dont know if this will be any help in your search, but theres a floating/popup/overlay logcat on the playstore called 'logcat extreme' that might be usefull, maybe give you some clues you may understand better then me.
I tend to pause the log, clear it, then unpause right before an action, in this case
1. Turning on bluetooth(with nothing paired) (pause, then save log)
2. Clear log, unpause, pair device, pause, save log
3. Clear log, unpause, turn off bluetooth, pause, save log
4. Clear log, unpause, turn on bluetooth(testing the pairing), pause, save log
Ill probably go over this again more thoroughly if more information comes out that helps me look out for something specific, perhaps this "GATT disconnect " that you speak off
The fact that this issue is happening on the nexus, as you say, seems to indicate that this is an issue with android itself, so im hoping, once xposed comes out for nouget, that this issue will be resolved when i update, which will be fun, seing as my adb/fastboot is not working........hoping flashfire app will do the job in this case, aswell as, hopefully, fix the adb/fastboot, but i digress
Edit
I have a very strong feeling that im gonna turn my device into a door stop when i eventually test/hope/hail mary with flashfire, a new shield purchase may be in my future just hope their still selling the 2015 model when/if i do
Click to expand...
Click to collapse
Thanks for the app, really helpful. Beside logcat you can also take a look of HCI bluetooth snoop.
a little bit off topic:
When try to stop the shield being discoverable I found that even it stop being discoverable by default bt_addr it will become discoverable by a different bt_addr if you scan for it long enough (about 1~3mins), and there are at least two different bt_addr.
you can try yourself by change the scan mode in bt_config.conf, there also an app call bluetooth settings (by4a.bluetoothsettings) can do that for you, just need to restart after install that app or the setting may not stick
Notes
I tested with another device, bluetooth mouse(which i believed to have a higher bluetooth version then the bluetooth keyboard version i was testing previously), ive been making an assumption, that under bluetooths settings "paired devices", if it comes up empty, then the pairing/s was/were forgotten, but clicking on the bluetooth mouse buttons, to auto connect, brought up a "enter pin popup"(shows up everytime i connect, so its not "fixed"), which connects ok after entering pin, so the pairing was still there, just not showing up in bluetooth settings
So at least i know its not deleted of the system
Search goes on
Edit
Bluetooth keyboard still cant auto connect(needs repairing), unlike the bluetooth mouse(which needs the pin entered every auto connect, which was not previous behaviour)
Although mouse works, the bluetooth "paired devices" sections is still empty, untill i press buttons on the mouse to auto connect
Hopefully someone finds this usefull, i sure hope im not jacking your thread dummyplug
banderos101 said:
Notes
I tested with another device, bluetooth mouse(which i believed to have a higher bluetooth version then the bluetooth keyboard version i was testing previously), ive been making an assumption, that under bluetooths settings "paired devices", if it comes up empty, then the pairing/s was/were forgotten, but clicking on the bluetooth mouse buttons, to auto connect, brought up a "enter pin popup"(shows up everytime i connect, so its not "fixed"), which connects ok after entering pin, so the pairing was still there, just not showing up in bluetooth settings
So at least i know its not deleted of the system
Search goes on
Edit
Bluetooth keyboard still cant auto connect(needs repairing), unlike the bluetooth mouse(which needs the pin entered every auto connect, which was not previous behaviour)
Although mouse works, the bluetooth "paired devices" sections is still empty, untill i press buttons on the mouse to auto connect
Hopefully someone finds this usefull, i sure hope im not jacking your thread dummyplug
Click to expand...
Click to collapse
Enter pin is actually an old pairing method before bt auto pairing. Anyway seems the bluetooth is quite buggy on shield, let hope it will be better for future firmware.
DummyPLUG said:
Enter pin is actually an old pairing method before bt auto pairing. Anyway seems the bluetooth is quite buggy on shield, let hope it will be better for future firmware.
Click to expand...
Click to collapse
Yeah, thats what im counting on when i have the opportunity to upgrade to nouget, hopefully the stock OTA download/OTA flash method works and fixes bluetooth and all my other various issues.
Also, for informations sake, i dont remember that particular bluetooth mouse of mine needing to enter a pin before i started having bluetooth issues, come to think of it, i realise the the initial pairing of my mouse auto pairs still, only after every auto connect does the pin show up
Ive encountered the blutooth/pin code popup many'ya times in the past and, well, quite recently i guess, i had assumed, that it was based on the bluetooth device you were pairing that dictated whether a popup pin would occur, and not so much android, different bluetooth peripherals having different bluetooth versions, some having or not having support for any particular bluetooth authorisation method introduced in higher/lower bluetooth standards.
Maybe part of the problem for me specifically is that my shield is not able to identify/communicate correctly with my devices
Its like you said, buggy ......and weird.......heres to hoping the ota fixes it
So does this remote - http://www.gearbest.com/smart-home-controls/pp_257680.html stay paired after reboot using this method?
GalaxyWhy said:
So does this remote - http://www.gearbest.com/smart-home-controls/pp_257680.html stay paired after reboot using this method?
Click to expand...
Click to collapse
I use the older one which don't have voice and take 2*aaa battery, beware the firmware may different, I had 4 of them and out of 2 behave a little bit different but still stay pair after reboot and don't affect usage
I have this exact remote and It has never even worked for me, does not make a beeping sound and pressing home + back any ideas why this remote wouldnt turn on at all?
hxxp://xxx.ebay.com/itm/HOT-Original-Xiaomi-Mi-remote-control-Apply-to-xiaomi-TV-and-Mi-tv-box-Pro-Cool/311829970277?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41375%26meid%3D2cd664f8927e4787a3a56bf779251134%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D222539565729
As I know only the old one will beep, and it should be "home + menu"
my 1st xiaomi remote which using cr2032 will not work very well with shield, may be mine got a outdate firmware
Hi XDA Gurus,
Recently purchased a Dasaita MTCE PX5 unit running Oreo 8.0. Upgraded to the latest MCU and software package straight away.
I just have a few issues and some advice that I was hoping to get from you guys.
Issues that I have..
1. Radio app or easy connection auto launches when I boot up my head unit - Is there anyway I can disable this.. searched and found a thread that mentions downloading startup manager and disabling it from there.
2. When both my OBDLink MX device and iPhone is paired to my headunit via Bluetooth, sound crackles and sometimes my OBD monitoring apps have intermittent disconnection to my OBD. Is this a common issue when 2 devices are paired.
3. Dashcommand app needs to be closed via task killer along with torque before it connects and works properly. Could this also be related to an app like torque auto starting in the background..
Need your recommendations..
1. Should I root my device via kingoroot? What’s the advantages.
2. Should I install Malaysk rom, what are the advantages. If my issues above can be resolved without custom rom I probably don’t need to buy if installing malaysk rom is beneficial then I will go for it.
3. How do I get more control over my device, I feel the settings are too basic for advanced functions.
Appreciate any feedback you guys can give me because I really like my carwebguru interface that I created and if 2 Bluetooth devices paired doesn’t play nice together then I’m happy using the CarPlay dongle that I should be receiving soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
KidCastro said:
Hi XDA Gurus,
Recently purchased a Dasaita MTCE PX5 unit running Oreo 8.0. Upgraded to the latest MCU and software package straight away.
I just have a few issues and some advice that I was hoping to get from you guys.
Issues that I have..
1. Radio app or easy connection auto launches when I boot up my head unit - Is there anyway I can disable this.. searched and found a thread that mentions downloading startup manager and disabling it from there.
2. When both my OBDLink MX device and iPhone is paired to my headunit via Bluetooth, sound crackles and sometimes my OBD monitoring apps have intermittent disconnection to my OBD. Is this a common issue when 2 devices are paired.
3. Dashcommand app needs to be closed via task killer along with torque before it connects and works properly. Could this also be related to an app like torque auto starting in the background..
Need your recommendations..
1. Should I root my device via kingoroot? What’s the advantages.
2. Should I install Malaysk rom, what are the advantages. If my issues above can be resolved without custom rom I probably don’t need to buy if installing malaysk rom is beneficial then I will go for it.
3. How do I get more control over my device, I feel the settings are too basic for advanced functions.
Appreciate any feedback you guys can give me because I really like my carwebguru interface that I created and if 2 Bluetooth devices paired doesn’t play nice together then I’m happy using the CarPlay dongle that I should be receiving soon.
Thanks
Click to expand...
Click to collapse
Don't run Dash command and Torque at the same time. This may be causing your Bluetooth problem with the crackling noise. So choose one or the other. I prefer Torque over any other OBD software.
As for the unit running easy connection at startup, once it's started go into the option menu on easy connection and disable the option for auto start.
I'm using a PX5 unit on 8.1 without said problems.
Hope this helps fella.
Sent from my LYA-L29 using Tapatalk
Tbizzness said:
Don't run Dash command and Torque at the same time. This may be causing your Bluetooth problem with the crackling noise. So choose one or the other. I prefer Torque over any other OBD software.
As for the unit running easy connection at startup, once it's started go into the option menu on easy connection and disable the option for auto start.
I'm using a PX5 unit on 8.1 without said problems.
Hope this helps fella.
Sent from my LYA-L29 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply... I’m running them independently, never at the same time... that causes issues for me too.
When I run torque + phone at the same time I get crackling.
Easy connection doesn’t have an option within the app settings to stop it running at startup. Do you mean within App Info in android settings?
Sent from my iPhone using Tapatalk
KidCastro said:
Thanks for the reply... I’m running them independently, never at the same time... that causes issues for me too.
When I run torque + phone at the same time I get crackling.
Easy connection doesn’t have an option within the app settings to stop it running at startup. Do you mean within App Info in android settings?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi
It's in the app itself. I will double check later on mine and post exactly what to do. But being it's only 6.10am and -5 degrees it's too cold to be looking now [emoji3587][emoji3587]
Sent from my LYA-L29 using Tapatalk
Sorry for you, the Dasaita , has audio problems caused by hardware (sound crackles) a lot of us have the same problem (looks like it has a shielding problem on the hardware)
*Wifi had (hiss sounds when downloading from the internet), I solved It changing the horrible wifi antenna.
*Some other has sound crackles when the unit is reading from the usb devices (usb dongles, cameras and other things).
*Some other has blank sound when they are calling from the bluetooth.
*Some other has blank sound and static when playing music.
Till now Dasaitia does nothing to resolve this problems. Almost all PX5 units from diferent brands has the same problem.
Do not try to root, it will kill your device (Dasaitia says that this thing is not rooteable)
Inside the option menu you can turn off the autostart.