Related
I recently installed miui from official website for lg e975. My phone is lg f180 so they both are same.
It was working fine till this morning it asked for update. I allowed. It retarted and now it starts shows google logo. Then goes to recovery.
I flashed my original backup rom. Then even flashed miui rom. Nothing changes. I wiped cache. Data dalvik a lot of times.
It just starts shows google logo. Goes to recovery. Please help
Im sorry if this thread doeant belong here. Mods please move
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
awais3344 said:
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
Click to expand...
Click to collapse
Flash stock zip kernel from artmod thread.
the problem is. I can't upload any files to mobile phone. if i connect to pc, it turns on, goes to recovery, so I click on mount storage, and other mount option, nothing happens. My computer detects phone as F180L with a exclamation mark.
If i go to download mode, and then try to flash any KDZ file from all the f180 KDzs. It gives me errors.
LG Support Tool on entering serial number and model name says "check out serial number and model"
ADB never detects my phone. So I can't upload anything.
No option to upload files via SD Card.
ok, so I have no clue what happened :crying: phone was in download mode. I did nothing, but only installed LG Support Tool USB driver, while the mobile connected.
Then I installed Microsoft .net framework 4.0. And my phone is now qhs_usbdload. it's officially bricked now. I have no clue what happened. This is all that happened before I restarted and selected "reboot to bootloader" and its dead. So there's nothing left to do but throw it out
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
1. Why is this in Development section?
2. You can't mount internal SD as USB storage. Use adb push or adb sideload instead, that will help you to get the files onto your phone.
awais3344 said:
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
Click to expand...
Click to collapse
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
artit said:
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
Click to expand...
Click to collapse
My phone is acting weird. Sometime it would start. Sometime the red light would blink. Sometimes the red light wouldn't blink at all. Then sometimes, it starts. And then it doesn't.
I have no clue what is going on with it.
But it went to download mode many times again, it would go to fastboot, bootloader, recovery etc. Then sometimes it will not respond to any buttons at all! I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
awais3344 said:
I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
Click to expand...
Click to collapse
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Regarding the charging problems, I had that once. I was able to startup the phone by simply using a 2A charger instead of the LG's 1.2A.
When I had this issue it was charging while in recovery. Please look at this post and flash your kdz.
http://forum.xda-developers.com/showthread.php?p=54934779. This one helped me http://forum.xda-developers.com/showthread.php?p=53728658
Sent from my LG-E975 using XDA Free mobile app
kt-Froggy said:
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Click to expand...
Click to collapse
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
awais3344 said:
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
Click to expand...
Click to collapse
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
huy_gm said:
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
Click to expand...
Click to collapse
Hi, regarding that. I was able to sideload exitrecovery.zip file. It goes to 100% then nothing happens. Nothing happened on phone screen as well.
And can you send me link to that stock zip kitkat? i have a miui.zip and few other roms that I have not tried. thanks
Edit: also what should I do about adb, am i doing correct?
Becuase in adb devices, my device is displayed with deviceID sideload
And i have only pasted adb folder, with a dll and a zip file, there is nothing else, do I need to install SDK?
I tried lg flash tool 2014 again, and it flashed, I swear yesterday I tried to flash it, and after clicking on it, it never showed me country and language selection menu, so it would sit there and do nothing. now I don't know how but it did it :laugh:
thank you so much you'all
Before posting I tried looking through every thread after I searched for this but it seems that there was always TWRP to fall back on.
Here's my problem thus far. Rooted my G Pad on Lollipop successfully. Followed this guide after rooting, to install TWRP recovery.
http://forum.xda-developers.com/lg-g-pad-83/general/vk810-altev-complete-root-recovery-t3108260
Followed the first step to downgrade the aboot to 4.2.2, then restarted the tablet like an idiot as I glanced at the wrong browser tab with a different tutorial open. I did NOT follow the second portion of the tutorial to get TWRP even installed and I'm sitting here with the Secure Booting Error in the top left corner. Cannot access download mode, factory reset, normal reboot or safe boot without getting that error. Any help here at all or is this the first time I'm SOL with a device.
UPDATE!
Managed to actually get it into download mode after 20+ tries of just rebooting and trying. Will update if I can successfully reflash with LG Flash Tool or not.
You should be able to flash it no problem since you're in Download mode. FYI, although it doesn't work all the time, someone in my ROM thread found a way to flash aboot (for instance, to flash the Lollipop aboot so you could get back into the ROM) from Fastboot mode. That is, they found a way that sometimes works to get into Fastboot mode.
Also, there's a chance you could perform the required steps to get TWRP installed via ADB with the tablet in Download mode. Not sure, though, since I haven't tried it.
I can certainly experiment, now that I've realized I can fall back on download mode if things go wrong. Flashed the Lollipop KDZ with no problem in download mode so at least the tablet is up and running to take another crack at. Thanks a ton for actually having those KDZ's so readily available being linked in your signature.
Sayt123 said:
I can certainly experiment, now that I've realized I can fall back on download mode if things go wrong. Flashed the Lollipop KDZ with no problem in download mode so at least the tablet is up and running to take another crack at. Thanks a ton for actually having those KDZ's so readily available being linked in your signature.
Click to expand...
Click to collapse
Cool, you're welcome mate!
roirraW "edor" ehT said:
Cool, you're welcome mate!
Click to expand...
Click to collapse
Ended up just downgrading to 4.2.2, using towelroot, and loki_flash\twrp. Enjoying CM12 now. Will probably update the original post with instructions in case someone makes the same mistake as me for some reason.
I'm Having the Same Issue
I cannot get download mode to work. Just the Lg symbol, and secure booting error in top left.
I charged it overnight, plugged into a wall, with it off.
Held both vol keys while off, and plugged into cpu using the original/undamaged cable. Tried a different cable that also works, and tried plugging it into the computer both ways (OFF and plugged in the computer first, then the tab, and vice versa.)
Was there any other trick you had getting into DL mode???
Any help is appreciated.
UPDATE: So i left the tablet plugged in, and just kept rebooting it, and held just power and vol up, and now, in a barely visible screen, it says download mode, but my computer thinks there's nothing connected. With 2 different cables, and 2 different flash tools saying this, even with correct drivers installed.
segadennisis76 said:
I cannot get download mode to work. Just the Lg symbol, and secure booting error in top left.
I charged it overnight, plugged into a wall, with it off.
Held both vol keys while off, and plugged into cpu using the original/undamaged cable. Tried a different cable that also works, and tried plugging it into the computer both ways (OFF and plugged in the computer first, then the tab, and vice versa.)
Was there any other trick you had getting into DL mode???
Any help is appreciated.
UPDATE: So i left the tablet plugged in, and just kept rebooting it, and held just power and vol up, and now, in a barely visible screen, it says download mode, but my computer thinks there's nothing connected. With 2 different cables, and 2 different flash tools saying this, even with correct drivers installed.
Click to expand...
Click to collapse
Hi, glad you at least found out the right button combo for Download mode. Can you be specific about the drivers you installed? Were they "LG_VZW_United_WHQL_v2.22.0.exe"?
Try rebooting after installing the drivers, with the tablet unplugged from the PC. After the reboot is finished, put the tablet in download mode and plug it into the PC. It can take up to 10 minutes to load the drivers once you plug it in. Use a USB 2.0 port preferably. Of the two cables you tried did you use the original cable? That's preferred, also.
You can look in Device Manager in Windows and see if the driver is still loading for the Android device listed under the "Modem" section. If after 10 minutes it still hasn't loaded the driver, try a different USB port. Lastly, if you need to, try a different PC. I know it's possible you don't have easy access to a different one, but sometimes that's the solution.
I decided to downgrade my LG G3 D851 from Lollipop 5.0.1 to the stock firmware.
I followed all of the steps of to downgrade my LG G3 D851 to the tee.
Towards to end, you have to restart your phone at the blue screen, this is what I did by taking out my battery when the big red "3" came up. It looked like it worked fine in the video right? But, to my luck, it just created a boot loop that I cannot get out of.
The reasons that I cannot get out of this boot loop are:
1. Because the LG G3 is so messed up, my computer will only recognize it as an unknown device even with the drivers installed.
2. The only way as far as I can see right now to fix it would be to follow the steps of the SAME video that caused this.
Any solutions guys?
Sorry if I am being vague, I'm kind of new around these parts and to rooting. If you need any answers I can surely provide.
Thanks!
Okay see if you can cancan get ti download mode. Take out your battery, put it back in, then hold volume up and plug in the USB. You should see a firmware update screen. Once there use lg flash tool to flash back to stock via kdz or tot.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Okay see if you can cancan get ti download mode. Take out your battery, put it back in, then hold volume up and plug in the USB. You should see a firmware update screen. Once there use lg flash tool to flash back to stock via kdz or tot.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Hey! The reason that the boot loop was created in the first was BECAUSE I tried to flash back to stock. Also, even if I did try to do this, the PC would not recognize the device and would register it as an "unknown device" even if I have LG G3 drivers.
Do you mind sending a screen shot of what you see in the computer? Does your phone still go to download mode anyway?
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Do you mind sending a screen shot of what you see in the computer? Does your phone still go to download mode anyway?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Here is a screenshot: h t t p://i.imgur.com/5SUI9rR.png
The phone is perfectly able to go into download mode
May I know what version of windows you are running?
xmayhemreturnsx said:
May I know what version of windows you are running?
Click to expand...
Click to collapse
Windows 10
justinvan777 said:
Windows 10
Click to expand...
Click to collapse
Do you have access to a computer with windows 7 or possibly 8. From what I know WIndows 10 is not supported by lg drivers yet. This could have resulted in your brick, however you can try to uninstall the drivers and re install them.
should try running the lg suite on your win 10 machine in compatibility mode for an older windows
LG gpad 8.3 vk810 . After installing a tweak for gaming graphics I stupidly bricked my tablet. Im new to rooting and android in general. The device gets stuck at LG symbol. I've tried clearing cache, and factory reset through holding the power and volume down. From what I've seen the next step would be to get it into download mode and use a LG utility, but I cant get it into download mode, also I imagine I need the right firmware once I do, Im very confused and just want to be able to use my tablet again. Thanks in advance.
Hi, did you look at my stickied guide for the VK810 in the General section?
Until you manage to get it into Download mode, there's nothing else to try. Perhaps some of the info I have in that thread will help you get that far.
roirraW "edor" ehT said:
Hi, did you look at my stickied guide for the VK810 in the General section?
Until you manage to get it into Download mode, there's nothing else to try. Perhaps some of the info I have in that thread will help you get that far.
Click to expand...
Click to collapse
Sorry, I can't seem to find it. As you can see I joined the forum yesterday.
iflow43 said:
Sorry, I can't seem to find it. As you can see I joined the forum yesterday.
Click to expand...
Click to collapse
In the General section, there's four "stickied" threads at the top. The thread I'm referring to has the title "[VK810.4G] [altev] most reliable way to root and install a custom recovery " and I also link to in my signature below.
I did look at it, I couldn't really find help there, truthfully I don't know what's going on even more than before haha. I cant get into download mode even by holding volume up and down then plugging in the usb, it just goes to the charging screen. Hell I wouldn't even mind no longer having root, I just wanted to be able to make use of my tablet while I'm still on contract till November. But thank you for the help. I believe I'm going to be using it as a paper weight until I can cancle that line through Verizon.
iflow43 said:
I did look at it, I couldn't really find help there, truthfully I don't know what's going on even more than before haha. I cant get into download mode even by holding volume up and down then plugging in the usb, it just goes to the charging screen. Hell I wouldn't even mind no longer having root, I just wanted to be able to make use of my tablet while I'm still on contract till November. But thank you for the help. I believe I'm going to be using it as a paper weight until I can cancle that line through Verizon.
Click to expand...
Click to collapse
On the VK810, you don't hold both Volume buttons to get into Download mode. With the tablet off, you hold the Up Volume button only while plugging it into a PC's USB 2.0 port with the original cable. Keep holding the Up Volume button for a few moments and you should see the extremely dim "Download mode" logo in the center of the screen. Sometimes it's barely noticeable.
You already had the drivers installed, right? Then reboot the PC after installing the drivers.
The first time you plug the device in Download mode to a new USB 2.0 port, or can take up to 10 minutes for the PC to load the driver. You'll see the tablet listed in Window's Device Manager in the Modem section.
Pretty sure my guide I mentioned also tells the way to get into Download mode.
roirraW "edor" ehT said:
On the VK810, you don't hold both Volume buttons to get into Download mode. With the tablet off, you hold the Up Volume button only while plugging it into a PC's USB 2.0 port with the original cable. Keep holding the Up Volume button for a few moments and you should see the extremely dim "Download mode" logo in the center of the screen. Sometimes it's barely noticeable.
You already had the drivers installed, right? Then reboot the PC after installing the drivers.
The first time you plug the device in Download mode to a new USB 2.0 port, or can take up to 10 minutes for the PC to load the driver. You'll see the tablet listed in Window's Device Manager in the Modem section.
Pretty sure my guide I mentioned also tells the way to get into Download mode.
Click to expand...
Click to collapse
I flashed 4.2.2 from you, installed twrp now im at the step of installing the 36b update downloaded from you with twrp, will i lose twrp when i do this? only reason i want to update is so i can chromecast my screen
iflow43 said:
I flashed 4.2.2 from you, installed twrp now im at the step of installing the 36b update downloaded from you with twrp, will i lose twrp when i do this? only reason i want to update is so i can chromecast my screen
Click to expand...
Click to collapse
No sir, as my instructions give in both the threads for my ROM and my guide for the easiest way to root and put TWRP on the VK810, you'll still have TWRP. The only caveat is that every time you want to switch from being able to boot the 36B ROM, you'll have to temporarily re-downgrade your bootloader (aboot.img) to 4.2.2 *again*, just so you can get into TWRP. Then when you're done in TWRP, you have to flash the 36B bootloader zip that I provide otherwise the ROM won't boot. You'll continue to still be able to get into TWRP if you forget, until you remember to flash the 36B bootloader zip.
I am not new to rooting and unlocking Androids. My LG G3's UI would randomly freeze where I had to reboot the device to have it working again. Today I decided to flash the vanilla unicorn rom in recovery. I downloaded the rom and copied it over to the phone but the copy process kept getting stuck at some point, that I always had to cancel it.
So I decided to wipe cache and data to just reinstall the official d855 CM13 rom I had earlier on the device's storage, the wipe got stuck for at least 20 mins. I got impatient and removed the battery trying to reboot into recovery, but I was stunned and stuck on the LG Splash screen logo, I kept trying to reboot into recovery but couldn't get past the LG splash screen.
I then decided to try rebooting into fastboot, I was able to boot into fastboot the normal way without any issues but every attempt at getting TWRP just wasn't yielding anything useful. The closest I've gotten to seeing TWRP since then was with the fastboot command
Code:
fastboot boot recovery.img
which reboots showing the TWRP splash screen image without actually showing TWRP, but I've noticed I can access adb while the screen is stuck on the TWRP splash screen image.
I can't do any sideload of the zips on my computer because TWRP just stays there stuck on the splash screen so I can't enable sideloading. I have spent hours with this and it has taken too much of my time, attempts at
Code:
fastboot flash recovery recovery.img
just returns with an error in cmd with FAILED (remote: flash write failure).
I can't figure out what to do anymore, I'm left with a phone that can't boot into the rom and recovery, only the fastboot and download mode works. I just need the phone to let me boot into recovery so I can flash the files I need to and have my phone back to its earlier state.
I'll really appreciate everyone's support, thanks!
geek-x said:
I am not new to rooting and unlocking Androids. My LG G3's UI would randomly freeze where I had to reboot the device to have it working again. Today I decided to flash the vanilla unicorn rom in recovery. I downloaded the rom and copied it over to the phone but the copy process kept getting stuck at some point, that I always had to cancel it.
So I decided to wipe cache and data to just reinstall the official d855 CM13 rom I had earlier on the device's storage, the wipe got stuck for at least 20 mins. I got impatient and removed the battery trying to reboot into recovery, but I was stunned and stuck on the LG Splash screen logo, I kept trying to reboot into recovery but couldn't get past the LG splash screen.
I then decided to try rebooting into fastboot, I was able to boot into fastboot the normal way without any issues but every attempt at getting TWRP just wasn't yielding anything useful. The closest I've gotten to seeing TWRP since then was with the fastboot command which reboots showing the TWRP splash screen image without actually showing TWRP, but I've noticed I can access adb while the screen is stuck on the TWRP splash screen image.
I can't do any sideload of the zips on my computer because TWRP just stays there stuck on the splash screen so I can't enable sideloading. I have spent hours with this and it has taken too much of my time, attempts at just returns with an error in cmd with FAILED (remote: flash write failure).
I can't figure out what to do anymore, I'm left with a phone that can't boot into the rom and recovery, only the fastboot and download mode works. I just need the phone to let me boot into recovery so I can flash the files I need to and have my phone back to its earlier state.
I'll really appreciate everyone's support, thanks!
Click to expand...
Click to collapse
Does your computer recongnise your phone. If it does you (probably) can use LG up tool to flash kdz file
dusan17 said:
Does your computer recongnise your phone. If it does you (probably) can use LG up tool to flash kdz file
Click to expand...
Click to collapse
I have tried using the flash tool, but I can't get into Download mode to use the LG Flash tool to get back to stock. All I get is fastboot.
There was a tutorial about using two wires on the emmc, but I haven't been able to get the Qualcomm HD_USB 9008 to show up in Device manager.
Sent from my ONE A2005 using Tapatalk
geek-x said:
I have tried using the flash tool, but I can't get into Download mode to use the LG Flash tool to get back to stock. All I get is fastboot.
There was a tutorial about using two wires on the emmc, but I haven't been able to get the Qualcomm HD_USB 9008 to show up in Device manager.
Click to expand...
Click to collapse
I have the same case with my old LG L90. I spent a lot of time trying to get it back to life without success . I have read another post similar to this but the wire thing worked. I really don't know then.
dusan17 said:
I have the same case with my old LG L90. I spent a lot of time trying to get it back to life without success . I have read another post similar to this but the wire thing worked. I really don't know then.
Click to expand...
Click to collapse
What kind of wire did you use in getting it to work?
And how were you able to get windows to show the QLoader usb com port. ?
geek-x said:
What kind of wire did you use in getting it to work?
And how were you able to get windows to show the QLoader usb com port. ?
Click to expand...
Click to collapse
I didn't want to mess around with motherboard so i gave phone to my uncle because he is better than me in that stuff. But sadly we didn't bring it back to life.
dusan17 said:
I didn't want to mess around with motherboard so i gave phone to my uncle because he is better than me in that stuff. But sadly we didn't bring it back to life.
Click to expand...
Click to collapse
Damn.
geek-x said:
Damn.
Click to expand...
Click to collapse
I saw people unbrick devices that way we propably did somenthing wrong. For the wires i would use copper wires.
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Jahanzaibawan said:
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Click to expand...
Click to collapse
I can't get the Qualcomm drivers to show up in Device Manager, even after installing the Qualcomm drivers and I have enabled test mode and all that. My com ports don't show anything Qualcomm at all.
Jahanzaibawan said:
Do you have Qualcomm drivers installed in pc?
I have unbricked many mobile using this pin shortening trick.it's simple.just make sure you are shortening the right pins.
Click to expand...
Click to collapse
Does it also matter that I am using a USB 3.0 port? My laptop has no 2.0 ports.
This might be helpful http://forum.xda-developers.com/spr...fix-hard-brick-recovery-guide-t3132359/page59
dusan17 said:
This might be helpful http://forum.xda-developers.com/spr...fix-hard-brick-recovery-guide-t3132359/page59
Click to expand...
Click to collapse
Thanks for that post. I'll give it a try again tonight, I just need the Qualcomm 9008 drivers to come up.
Cause I noticed every time attach the wire to the board, windows recognizes the phone with an error "USB device not recognized" and in device manager a yellow warning mark next to one of the USB device icons.
Sent from my ONE A2005 using Tapatalk
geek-x said:
Thanks for that post. I'll give it a try again tonight, I just need the Qualcomm 9008 drivers to come up.
Cause I noticed every time attach the wire to the board, windows recognizes the phone with an error "USB device not recognized" and in device manager a yellow warning mark next to one of the USB device icons.
Click to expand...
Click to collapse
I that case right click chose update drivers and chose drivers manualy. Something like that should help you get device recognized
dusan17 said:
I that case right click chose update drivers and chose drivers manualy. Something like that should help you get device recognized
Click to expand...
Click to collapse
What directory will I choose to install the drivers from, the Qualcomm installation directory doesn't seem to contain the actual driver files.
geek-x said:
What directory will I choose to install the drivers from, the Qualcomm installation directory doesn't seem to contain the actual driver files.
Click to expand...
Click to collapse
Uf, i don't know it should be listed.
geek-x said:
Does it also matter that I am using a USB 3.0 port? My laptop has no 2.0 ports.
Click to expand...
Click to collapse
Yup.mostly 3.0 doesn't work.80% 3.0 cause the problem.
Jahanzaibawan said:
Yup.mostly 3.0 doesn't work.80% 3.0 cause the problem.
Click to expand...
Click to collapse
I'll try to get a USB 2.0 laptop to try this on. I just hope it works this time.