Root Request anzhen4_mrd7_w 4.4.4 - Upgrading, Modifying and Unlocking

Hi,
So I came across an Elite Tablet with below Spec, looking for root/twrp/cwm:
Baylake
anzhen4mrd7_w
iNtel Atom Z3735F
Kitkat

Came across a similar device, ANZHEN4_M BAYTRAIL1418C453
c1nd3r said:
Hi,
So I came across an Elite Tablet with below Spec, looking for root/twrp/cwm:
Baylake
anzhen4mrd7_w
iNtel Atom Z3735F
Kitkat
Click to expand...
Click to collapse
I can get to fastboot, but can't find any twrp to flash. Recovery is locked with a pin. It's one of those hotel tablets that lets you control the lights and order room service etc. Thought it could be fun to take it to the next step, but need some guidance.

Sorry to bring up a very old thread. I was just given one of these for free from a family member. This was a promotional device given away at a seminar. I would like to hack this to learn a bit but need a place to start.
Details from the tablet:
- IFWI VERSION: 1G-141024
- SERIAL_NUM: Baytrail 160ADA152
- DROIDBOOT VERSION: 2.0
- PRODUCT: ANZHEN4_N
It will boot into fastboot and recovery/droidboot but seems to be very restricted. I have options to upgrade via ADB, as well as loading a file from the SD card in the main settings however I assume these both need a signed file to succeed.
Google has led to some dead ends. Did find a listing of specifications from a shady looking russian site, linked here.
I would love to find the base firmware to have something to fall back on if I mess up, or even some help on how to go about pulling this myself from the device. From there I can work on root and loading custom roms. Crawl first.
Very appreciated for any future help!

have the same product and not find how root the device. Please helpme.

Related

[Q] Who provides a professional service to upgrade my Kaiser

Hey all,
I own an unlocked ATT Tilt 1 (Kaiser 8925). It is currently running windows mobile which is extremely slow. I have read all over the internet that you can put the Android 2.2 OS on this phone and have seen youtube videos on this topic also.
Ideally I need to be able to buy apps from the android marketplace.
Since I'm not a phone hacker I'd like to find a professional cel phone service company that can do this for me.
I searched extensively on Google and can't seem to find one. So who can do this and what is the normal charge for something like this.
Just trying make my old phone useful in wifi mode.
Any advice would be great.
Regards Henry
I don't think there is a company that provides such a service especially if we take in to account that kaiser/tilt is a 3 year old device and the android port is not official. There are plenty of topics in the forum describing how to replace winmo with Android. You don't have to be a hacker to run Android on your phone. Just read the stickies and you wil be able to flash ityourself in no time
There are phone dealers out there (in the USA anyway), that will do this for a fee on the Kaiser, but trust me, with what has gone into the development of this, almost anyone can do it. Save yourself the money and try it yourself. The worst I've heard about is a mis-flashed phone needing some master reset.
The question is who?
I live here in the Orlando area and have called a number of cel phone companies.
I was treated like King Gidorah Three Headed Space Monster. They didn't have a clue this could be done.
Henrykjr said:
I live here in the Orlando area and have called a number of cel phone companies.
I was treated like King Gidorah Three Headed Space Monster. They didn't have a clue this could be done.
Click to expand...
Click to collapse
Listen HenrykJR there are about dozens of android builds on this forum + many different versions of two kernels, not all of those will work correctly for you. You might experience different issues with one setup but the other will work correctly for you. So even if there was a company that could flash it for you, you might end up with an unstable device. Also how could a company gain knowledge on flashing android builds to a phone that was originally shipped with windows mobile??? You seem to be looking for Nessy....in woods.
Your best bet now is to find someone in the forums to help you flash your device....maybe even use skype to show you how to do it. It really isn't that hard.
Hehe, i don´t think you´ll find a Company that will do it for you. Maybe you find some guys that do it for Money (me to ). But if you spend a little time with reading through this forum you could do it yourself and save the money.
Preparing:
1.) You need a SD card (mandatory for android on Kaiser). And you need a Google Mail Account for syncing your contacts etc. and access the android market.
2.) You have to "unlock" your Phone (with HSPL/HardSPL). Only after that you are able to flash things (Cusom WinMo ROMs, Radio, Android) to your Kaiser. So read through this guide and follow step 1-4.
3.) Now you have an unlocked phone an you should be able to flash everything. And the first thing you flash should be the latest "radio". The "radio" for Kaiser is similar to the BIOS for your PC. Like the subsystem and responsible for GSM chipset etc... So look & read in this Radio-Thread, download the latest Radio (it is 1.71.09.01) an follow the guide "Flashing Radio from microSD"
4.) Now your Phone is up-to-date and ready for flashing Android (or WinMo custom roms). YOU NEVER HAVE TO DO THE STEPS 1-3 AGAIN! Your Phone is now completely prepared!
Flashing Android:
For Android on Kaiser you always need 2 Parts. The Kernel (this part initialize the hardware so its similar to "driver" on PC) and the Built (the Android OS itself). But Both should work together so you´ll may find in some kernel suggestions in Built-threads because not ever kernel work with every built. For your beginning i whould suggest you some things:
First the kernel:
DZO is the most popular (the father of android on Kaiser) Kernel-Developer for Kaiser. So go to his repository and download "voguimg-240x320-2.6.32-froyo-09-10-10_23.nbh". Because Vouge and kaiser have almost the same hardware we all could use this kernel. But everyone have to modify this kernel to make phone related optimizations. You can do thy by hand (not recommended for you) or with a tool called "Atools". This tool is writthen in "Python" so mac and linux user could use it too. But you need to install Python. But that is all described in the Atools thread. Read through it and follow the guide.
Modifing Kernel:
We will only modify the madatory things. Not more at the moment...
So run Atools, klick on the "folder" Button and load the "voguimg-240x320-2.6.32-froyo-09-10-10_23.nbh".
Device: "Kaiser" should be checked
Resolution: 240x320 should be checked (native resolution of Kaiser display). Everything else will give blurry optic.
Version: "Froyo" should be checked, because we will flash a Froyo built (thats android 2.2). If you want to flash an older built like a Donut one (1.6) you have to modify & flash your kernel again.
Panel Type: Try "auto" or "1" first. But if you have a fuzzy screen or artifacts you have to try out which paneltype fits best for your device. HTC has built in 3 different displays in the Kaiser and the only way to find out which one is builtin is trial & error.
Keymap: Depends on which hardware keyboard layout you have. Here in Germeny i have to use "qwertz".
We leave the other options as they are an klick on the "Disk" button to save our modificated kernel now. it save it as "KAISIMG.nbh".
Now we need the Built:
I suggest "Fat Free Froyo" at the moment. Fast, stable, an looks good. So go to this thread and download "ODEX DOWNLOAD RLS5 ALL LANG-ODEX" on the bottom of the post.
then unzip/unrar this file...
Flashing your first Android:
1.) You should have a fat32 formatted SD card
2.) put the Kernel (the modified KAISIMG.nbh) to the root of SD card
3.) Create a folder named "andboot" on SD card
4.) Put the unzipped file (androidinstall.tar or .tgz) in the folder "andboot"
5.) Remove SIMcard and any cables from phone and put the SD card in your phone. Battery should be 50% carged or more...
6.) go to bootloader-mode (press and hold camera button and powerbutton). the KAISIMG should be loaded and it will show you "press powerbutton to update" or something similar. Do that... Now a progressbar will appear. When it is at 100% wait a few seconds an then pull the battery. Wait 10 seconds an insert it again. Voila! You flashed your first android kernel!
7.) Now we have to install android itself. So Power on the phone. In the moment when you see small white text on black background you have to press and hold the d-pad button. This one in the middle. Now you get in the install menu.
8.) Leave the options "System on nand" and "DATA on nand" as it is. Navigate to "install system" an press dpad. It ask "format system" and "format data". Both "YES". after this procedure you enter the menu again. navigate to "quit".
9.) Yeah! The first Bootup of Android! The first bootup takes longer as the following ones because now the system prepares for bootup and do a lot of optimisations. Even if you enter the lockscreen you should give it 10 minutes time to finish this optimization process in backround.
10.) Finish! You have flashed your first android completely! Now you can play around and make your settings. Remember: You have to sign in to your google account befor you can access the market or syncronize your contacts etc.!
Sounds more complicated as it is. Try it!
And if you´ll dig in deeper in this stuff you have to read here! Especially the Stickies/Refs/Tutorials! We´ve all done that!
have fun!
Henrykjr said:
Hey all,
I own an unlocked ATT Tilt 1 (Kaiser 8925). It is currently running windows mobile which is extremely slow. I have read all over the internet that you can put the Android 2.2 OS on this phone and have seen youtube videos on this topic also.
Ideally I need to be able to buy apps from the android marketplace.
Since I'm not a phone hacker I'd like to find a professional cel phone service company that can do this for me.
I searched extensively on Google and can't seem to find one. So who can do this and what is the normal charge for something like this.
Just trying make my old phone useful in wifi mode.
Any advice would be great.
Regards Henry
Click to expand...
Click to collapse
Brother, You can do it yourself, I can assure you. Regarding any ambiguity, you can contact me through PM. (I can guide you complete on voice over skype / msn). Its a TIDEOUS job but EASY to do since there is no MEANS OF BRICKING your kaiser (unless you flash something else than what u have do to install android).
I am here to help you in this community. And you can do this thing yourself.
Your device is At&t Tilt. The bad thing about installing android is getting a RIGHT kernel that suits your LCD type and enables wifi in the android build u install. (maybe in 1st try, maybe takes almost 10 tries like it happened for me)

MP MAN MP 720 original firmware found

hey guys, new to this, just got a MP720, not much firmware about for this one, not must of anything really,
I did however find this site with links to the to original firmware from MPMAN,
using google translate haha, it seems the two flavours of chipset for this taplet,
Hynix NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Hynix.rar
Micron NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Micron.rar
Flash Tool:
https://dl.dropbox.com/u/29403117/upgrade tool and Introduction.rar
that said i have not tested these FW's and cant vouch for the safety of using them,
I'm not a developer but hopefully they could be usefull for making a cyanogenmod for it (fingers crossed haha) or some one who has bricked there tap,
source:
https://slo-tech.com/forum/t528078
I have downloaded these files so if the link becomes dead please let me know and i will send them
Firmware Testers Needed
Is theres anyone with a bricked MP720 to test these FW's? id like to upgrade my 2.2 tablet, but only if these FW's are known to work.
TESTERS NEEDED
thanks in advance
Tested firmware, working fine, so it is all good for anyone with a bricked mp720/MID7020
would this be usefull for making a custom rom?
Since last december, my tablet was bricked!!!
Wordked for me !!!
Thanks !!!!
Since no question has been asked here, moved to General section.
hail to the king baby!
works well! thank you!
when i tri to instal the firmware i have this errors
ERR_FWDN_DRV_IOCTRL_DEV_INITIALIZE
CFwdnPORT:evice_Init:FWDN RESPONSE PARAMETER FAILURE
Please HELP.
Hello, need help with mpman mp720, followed instsruction from "upgrade firmware introduction" but the firmware utility does not detect my tablet's nand memory even after i turn off device and start by pressing volume up and power button,when i do this the brand logo disapaear and screen is black only with lcd backlite on, the table is in the device manager recognized as Android device and android composite adb interface.
The tablet don't start and remains blocked at word "android".
Any suggestion is welcome.
ancient998844 said:
Hello, need help with mpman mp720, followed instsruction from "upgrade firmware introduction" but the firmware utility does not detect my tablet's nand memory even after i turn off device and start by pressing volume up and power button,when i do this the brand logo disapaear and screen is black only with lcd backlite on, the table is in the device manager recognized as Android device and android composite adb interface.
The tablet don't start and remains blocked at word "android".
Any suggestion is welcome.
Click to expand...
Click to collapse
Try whit this FWDN v7_2.09 if not work try another version of FWDN ,you must see this in FWDN Low format whole memory before download
I have manage with volume "-" and power
mine was hynix and has been flashed succesfuly
thanks

Spreadtrum i9502 rom

Dear Friends,
I have been reading some of your post and see you have experience in SPREADTRUM. I'm looking SPREADTRUM I9502 ROM is information that has the battery back but do not get it. This phone entered me into a bootloop after trying to install a Custom ClorkRecovery because as you know not get supported for this phone to make a perfect backup and then give an option that says Fix Permission. I managed to get a similar boot the phone but remains in the main screen graphics and do not let me touch the mobile but the phone is no longer in bootloop, I guess it's the problem of the graphic display controllers. This I do with the PAC is ResearchDownload and SC6820. S9002_JHM_E09_HVGA_SMART6820_V03.03B14_RELEASE. I can get into adb mode, we do including the root, ie I have permisios super user, everything from the PC. Good thing this firmware automatically enters debug mode (thank God) and I can do all those things. I can get on the phone and see all their directories.
Another good news is that I have another phone like I did a backup and a shell called mkbackup.sh supported all the partitions but I can not make BACKUP of the famous FDL1 and FDL2. Attached is a JPG with the files I have on the back. You can get these files from my other phone just for backup or try to port the ROM operating celurar to this one? or would be easier to copy the files that have to do with the display settings, but I really have read many forums ROM porting and also work with CYGWIN KITCHEN but I have not accomplished anything. Well I'm no expert on the subject. Can you help me.
THIS IS THE FULL INFORMATION OF CELLULAR see that achievement from THE FACTORY TEST MENU.
MocorDroid2.3. 5 test-keys Platform Version: Mocor_880XG _MODEM_W12 .43_P1_Debug.Project Version: sc6820_ modem.BASE Version: DM_BASE_12A_W12.43.HW Version : sc6820_modem.11-02-2012 17:53:08
Regards

[REVIEW] Teclast X89 Baytrail Tablet Dual OS (Windows & Android)

Hi all!
i wrote reviews for two devices that are very interesting on checking together.
iPega 9023 rev2 -> Telescopic bluetooth controller for smartphones/phablets/tablets and standalone usage.
Teclast X89
There is a summary of the Teclast X89 Device. (sorry, but i can´t post complete article here, due the limitations of the characters by message on this forum)
_______________________________________________________________________________
[REVIEW] Teclast X89 Baytrail Tablet Dual OS (Windows & Android)
​
Acknowledgments
To Geekbuyingstore for send me a sample of their product Teclast X89 to test it and write this review.
Note about this review
This article is the first part of the main review of the device. Currently i get bricked the device when trying to update/install a clean windows version, and i can´t keep testing for now, until i found the way to recover it
When i get the device unbricked (if i get this), i will post a second part with steps for recovery, firmware update, tips and tricks for this device.
This article is based on general usage of the device, and for windows get many videos of games running directly on the device itself, for showing what you can expect of this.
For technical info and benchmarking on windows, when i get this device operative again, i will update this article with these sections.
Apologize if the article is not enough informative as you can expect. I'll do my best to bring a second part with more info about this device.
Product showcase(Checking of the external view of the package)
First of all, i never mention about packaging of the store that sent to me their articles, because usually i don´t consider interesting to mention, but this time i will do an exception because i get so pleased about this point.
For this review, Geekbuying sent to me two devices (but i wrote in different articles) that correspond to a suggested (by me) combo for use together:
Tablet Teclast X89
iPega 9023 controller
Both of them come in the same package, but fully protected, first with the typical plastic with bubbles, covering all the content:
​
Then, there is a bag with protective system for avoiding shocking of the devices.
​
The package arrives without any kind of problems, with the original packaging of the devices in perfect condition.
I wanted to remark this because is not usual that stores give this attention on the devices they send.
Now, back to the device itself. the packaging of it is simple, but all main texts are in chinese.
​
In the front we found the name of the product (Teclast tPad), and the Intel logo, that give to us a main clue about what is inside.
​
Back part is the description of the product in chinese
Note that there is no info about the specific model of the tablet (Teclast X89)
Inside we found the basic distribution of the package
​
Product information
​
According with the manufacturer, or searching info on web pages, we can found many sources of information about the device and sometimes these information may be not consistent (may be different from one web page to other), and this may cause some confusion for anybody that wants to get info about this product.
On this section i will post the info i get from the manufacturer (or is not possible, the web page that i consider more reliable), listing only the relevant points for a tech analysis of the product, and omit these points that don´t get any relevant info about the device (as many time we found on many pages, things such video capabilities, mail capabilities, etc, that really are software based features that we can install on the device, and not a real feature of the device itself)
I did not found the official specs on Teclast webpage. There is the specs of the previous version (X89HD), but not for this specific device (Teclast X89, or Teclast X89 Retina Display)
Operating System: Android 4.4 & Windows 8.1 OS (Dual Boot)
Model: Teclast X89 Dual OS
Announced: 2014-07
Color: White
Shell Material: Plastic
Display
Size: 7.9 Inch
Resolution: 2048*1536
Display Technology: IPS Retina capacitive touch screen
CPU&GPU
CPU Manufacturer: Intel
CPU Model: Bay Trail-T Z3735F
CPU Core: Quad Core
CPU Speed: 1.83GHz
RAM&ROM
RAM Type: DDR3L
RAM: 2GB
Hard Drive Type: eMMC
Hard Drive Capacity: 32GB
Extend Card: T-FLASH(Support 32G MAX)
Other Functions
Camera
Front: 2.0MP
Back: 5.0MP (Autofocus)
HDMI: Up to 1080p
3G: Supporting external 3G modem
Bluetooth: 4.0
GPS: NO
G-Sensor: Four way
Power
Battery Type: Li-ion battery, 5000mAh
Battery / Run Time(up to)
Wifi On: 4 hours
Wifi Off: 8 hours
Power Device Type: AC Adapter, AC 100-240V
Charging Voltage: DC 5V, 2A
Communications
Wireless ConnectionWIFI
Wireless Protocol802.11 b/g/n
Dimensions200 ×138 ×7.4mm
Net Weight512g
Connectors Ports
1 x Micro USB Port
1 x Earphone jack
1 x Micro HDMI port
1 x Micro SD Card slot
​
Hope you found interesting and useful.
_______________________________________________________________________________
Zalu2!
Not booting to windows after root
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
djshorty said:
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
Click to expand...
Click to collapse
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Deen0X said:
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Click to expand...
Click to collapse
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
djshorty said:
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
Click to expand...
Click to collapse
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
mooncake5874 said:
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
Click to expand...
Click to collapse
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
djshorty said:
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
Click to expand...
Click to collapse
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment VManager.apk
GOOD LUCK!
mooncake5874 said:
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment 3193597
GOOD LUCK!
Click to expand...
Click to collapse
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
djshorty said:
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
Click to expand...
Click to collapse
Maybe you can use google translation
mooncake5874 said:
Maybe you can use google translation
Click to expand...
Click to collapse
I use google translate, but it is awful, i downlod tutorial pdf file, and translated, but i am afraid that i can make mistake because translation is awful.
If someone who knows chinese and english can translate it right it will be good.
Or someone can confirm that tutorial for x98 3g is the same as this only the files are different, that is also good think to do.
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Deen0X said:
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Click to expand...
Click to collapse
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Hibernat does not work
Hello X89 owners,
i also have the newest dual boot retina display version and i am really impressed by the tablet. All works fine and great performance. Only one thing does not work that worked fine for all my other windows tablets i use before. I am not a big fan of connected standby because it still drains battery, so i use "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the devices (because default button is not visible).
Unfortunately it does not work with the teclast x89. If i run "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" hibernate command it shuts down the tablet but after reboot it does not restore the hibernate state, it simply boots up normally. I also checked event log having error:
error: Windows failed to resume from hibernate with error status 0xC000000D.
I also tried recreating hiberfil.sys and checking disc consistence. But nothing helped. So can you try this on your devices? I simply want to know if its a general Teclast X89 problem...
Thx and br
Arangato
Hi Arangato.
I'm doing some testings with MeegoPad T01 (similar baytrail than Teclast), and as you i can´t get this thing to hibernate by command line
messing with the device, in some moment i get an effective hibernate state, but i'm not sure how i get.
in some testings, after unplug the power and connect again, the device boot windows (quick than normal) from scratch, and show me the application i get running previous the sleep (burnout paradise)
i will keep doing tests, but i really don´t know how to replicate for now. This messages really is for confirme that there is some way to do a sleep on this device, but of course, is not the standard way.
i'm thinking now... may be when i sleep the device, i think i keep the power button pressed to shutdown... for long time, after this unplug power source, wait few seconds and plug again. (something like this i did, i think)
keep testing...
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
aitnog said:
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
Click to expand...
Click to collapse
i tried but did not enabled.
yeah, may be on timing is the same, but there is a good difference. With Hibernating, when you get back, get all the tasks you're doing in the same status (games, work, etc). i really prefer hibernate than complete turn off for this reason.
but thanks anyway.
i recovered the tablet and doing some testings (but for now i´m centered on other devices i must release reviews).
meanwhile, i published the guide for flashing and recover the device, translating the original in chinese, and adding some other stuff that may be useful.
http://manguiro.blogspot.com/2015/03/guide-teclast-x89-installation-guide.html
Note: if your device cannot recover (like mine) with normal steps, or there is some message about corrupt partition table, invalid disk, etc, you must do some manual steps (the flashing tool can´t handle this)
i will put my steps on other article (really, i need to publish another reviews first), but basically i opened the flashing xml file, and check that there are some commented lines that, if you uncomment, the flashing tool will omit anyway, then you must do these steps manually, from fastboot command.
with this, i be able to 100% recover the device. Now i get android and windows working without problems.
hope you found useful.
Touch has stopped working! In windows.
djshorty said:
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Click to expand...
Click to collapse
Hey my touch stopped working in windows too.
Anyone have any idea how to fix it? I have only had this for 1 hour and now it is useless for what I got it for...
I need to find out how to restore the touch capabilities to windows. I tried refreshing, it happened after I went to android for the first time.
I've got the Atom Z3736 Win 8.1 version of this but does anyone know if it's possible to install dual boot because this version uses the Z3735?
Because just about all the forums for this device are in Chinese and using Google translate is a nightmare to even find the right people to ask.
com.android.systemui keeps crashing when charging level at 100%
Hello,
recently I get my Teclast X89 tablet, but unfortunately it appeares to have a problem. When the battery charging level comes to 100% (at 99% everything is OK) tablet becomes totally unusable. When the screen is switched off it cannot be waken up and when I use the tablet a window pops up telling that "Process com.android.systemui has stopped", like here:
imgur.com/hjWI1lP
After restart everything is OK, but it really grinds my gears. Maybe someone know how to fix this problem?
Please halp!
Bogusz
Hello Deen0X, thanks for your reply and explanation. Now i know it seems to be a general problem. If you have a tablet like this connected standby is activated and with this hibernate is also enabled by default (you should find a hiberfil.sys file in C root, its used for fast boot option) so you normally can hibernate with the command i mentioned before: "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" this works fine for my other acer win 8.1 tablet (OOTB system) directly after install. But not for the Teclast x89. Of course having a normal boot and restore from hibernate is pretty same time, also fast boot does not have that big impact. I like hibernate because it "freezes" actual system status without draining battery after that.. i often have several browser windows opened, some other metro apps and i like to resume to that state and not to have a clean boot.
@Deen0X: could you check your event log? Is there also the message that device could not restore from hibernation?
So keep me updated, or maybe anybody else can try the "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the teclast x89 dual boot. It will not harm the device. I have the experience if hibernation is disabled and you run this command it simply locks the screen..
Thx and br
Arangato

New BestBuy Insignia 10 inch tablet NS-P10A8100 - Review and Info

For a project, I needed a low cost 32GB tablet and noticed that Best Buy was about to introduce a new version of their 10 inch tablet. It is now available and I am creating this post to attempt to gather useful information into a single thread as I doubt this tablet will merit it's own forum.
What is possible so far...
1. Bootloader Unlock
Root Status
I tried Kingroot v3.5 and it was not able to root the tablet.
Links:
Specifications: https://www.insigniaproducts.com/pdp/NS-P10A8100/5855801
Manufacturer and Model: Lightcomm Technology Co., Ltd. MID1023MA http://www.light-comm.com/en/productinfo-176-193-75.html
Brief Review:
The tablet is pretty much what you would expect for a low cost tablet. The build quality is pretty good (it doesn't give much when you twist it, everything fits well) and the screen is better than I had expected. They had the old model on display and this is a pretty good improvement over the previous model. I may do a more complete review but just want to share some observations...
Camera - Low megapixel but fairly snappy response with autofocus.
Crapware - Very little - File Manager, FM Radio, and Sound Recorder - All else is standard android/Google apps
Storage - About 23 GB available (reports firmware is 9.19GB)
Speakers - Adequate but not very good
OS - Android 7.0 - May 5, 2017 Security Patch - No updates currently available
No problems getting ADB and Fastboot acess but will report more after I have time to work with it.
Saved for future use...
Bootloader Unlock
It is possible to unlock the bootloader. NOTE: This may void your warranty and the unlocking process triggers a factory reset. ALSO NOTE: Like many other devices, the tablet will display a warning at every boot that the device is no longer secure.
STEPS:
1. Enable ADB via Developer Options in Settings
2. Enable OEM Unlocking in Developer Options in Settings
3. Via ADB, reboot into bootloader mode
4. Ensure you are able to access the tablet via Fastboot
5. 'fastboot oem unlock' - Follow the prompts
6. Your device will reset (as it explains) and will be bootloader unlocked
Bootloader lock
It may be possible to relock the bootloader. When I gave it the command "fastboot oem lock", I got a message on the tablet asking me to confirm. However, it indicated that I *might* need to put the original software back on. At this point, I wasn't willing to try without a recovery option.
Hi. I just purchased the new flex 11 from BB myself. It appears to have the exact same processor, chip, and GPU as another tablet I have used before. The Lenovo Tab3 8. The only difference I can see is the emmc size (Lenovo 16Gb & Insignia 32Gb respectively) and the screen sizes. The processor is the same however limited to 1Ghz on the Lenovo whereas I believe the 1.3Ghz is the base CPU speed (I think the European version of the Lenovo came with a 1.3Ghz speed). So out of curiosity would the finished Lenovo's TWRP recovery work on the Insignia? Just a thought. Also, in case of brick could you use the Lenovo's firmware to flash it (after modding the scatter file of course). I'm just a noob to development but have no problem getting my hands dirty (I have 2 Lenovo's both broken but modified heavily)
I'm stuck in this in this problem, I can do the Bootloader Unlock but no furder. Is there any update for this device?
Is there a way to know if or when it will be possible to root this tablet?
Hidden Developer Mode
While browsing the net today I came across an article about unlocking the OEM so having a NS-P10A8100 I decided to give it a try and it worked.
Go to your about tablet setting, Model number and tap on it 7 times, a message will come up saying You are one step away from being a developer, this came up 2 times but after I did it the third time and checked my settings the new hidden Developer mode was in my settings and inside was a button, OEM unlocking.
I haven't tried anything else yet as I am new to all this but maybe this will help to get a Root Strategy for this model of tablet.
So it's there a way to fix this piece of sh!!! Cause it's so anointing that you can't even look at it with a ugly face cause it will start to stall.. I'm new on all this stuff so if there is away to fix it or making a little better please put all the steps to do it... Thank you so much!
flash file for this device?

Categories

Resources