Teamviewer Host - Nexus 7 (2013) Q&A

Anyone have any luck using Teamviewer Host? When I install the app and login into my account, it appears to be connected to the Teamviewer servers and says its ready for connections. But on the Teamviewer remote console, it shows the N7 online, it just doesn't allow me to actually begin a session like it does with my other devices.
Anyone have any luck with this?
Running rooted stock 5.1.1 with Timur Kernel for fixed installation (in-car). I don't believe the Kernel is affecting the connection, I don't think it interferes with much besides power and sleep. I think it might be a Teamviewer issue with Asus devices, but want to know if anyone has any work-arounds or hints on making it work.

Nope, doesn't work for me either with Bad Boyz Nexus 7 Stock Rooted 6.0.1 Marshmallow.
Appears to connect like you say but the Remote Control tab says "Initializing Display Parameters" before it gives up after a few minutes.
Shame, it's a really handy tool.

Xaph0d said:
Nope, doesn't work for me either with Bad Boyz Nexus 7 Stock Rooted 6.0.1 Marshmallow.
Appears to connect like you say but the Remote Control tab says "Initializing Display Parameters" before it gives up after a few minutes.
Shame, it's a really handy tool.
Click to expand...
Click to collapse
Same for me. Running Nexus 5 rooted stock. Could be a root issue? Lots of negative comments from XDA (mostly rooted im guessing). Interestingly it asks me for root access when I try to connect.

Did you guys figure this out? I'm having the same issue on my Nexus 5 (rooted)

Related

[Q] ARLiberator/AllShare Cast and my S3...

I rooted my S3 so I could use ARLiberator with the AppRadio2. I am using the AllShare Cast dongle with the AppRadio to make it all work wirelessly. After I rooted my phone, the AllShare Cast option in my settings was gone. So, (keep in mind I'm a noob) when I got the notice my phone was due for an Over the Air update, I did it. Good news, it didn't brick my phone and I got AllShare Cast back. Bad news, it took my root away.
So, I need to know where I can find a 100% stock image that just injects root that I can do via Odin. The only reason I have to root right now is to get this working with AppRadio. In the future I may get more crazy with other ROMs, but right now I just want this to work.
Can someone point me to a safe tar file that is the root for a stock image on the AT&T SGS-i747 that is the most current?
Thanks.
AND, if there's anything else I need to know, please inform away! The root I did last time didn't add to my counter, so I'm kinda hoping that any new root I do won't either. If it does, I guess that is okay as long as the triangle app I've read about can fix it.
Again, thanks for any and all input. I'm learning as fast as I can.
shawn10ski said:
I rooted my S3 so I could use ARLiberator with the AppRadio2. I am using the AllShare Cast dongle with the AppRadio to make it all work wirelessly. After I rooted my phone, the AllShare Cast option in my settings was gone. So, (keep in mind I'm a noob) when I got the notice my phone was due for an Over the Air update, I did it. Good news, it didn't brick my phone and I got AllShare Cast back. Bad news, it took my root away.
So, I need to know where I can find a 100% stock image that just injects root that I can do via Odin. The only reason I have to root right now is to get this working with AppRadio. In the future I may get more crazy with other ROMs, but right now I just want this to work.
Can someone point me to a safe tar file that is the root for a stock image on the AT&T SGS-i747 that is the most current?
Thanks.
AND, if there's anything else I need to know, please inform away! The root I did last time didn't add to my counter, so I'm kinda hoping that any new root I do won't either. If it does, I guess that is okay as long as the triangle app I've read about can fix it.
Again, thanks for any and all input. I'm learning as fast as I can.
Click to expand...
Click to collapse
Take a look here, look for the stock image with root injected into it. I am also using Allshare Cast with Arliberator - how is it working out for you? I have some issues where my subwoofer will turn off sometimes, but if I press the menu button on the Appradio to launch voice commands, then click back, the subwoofer will turn on. Weird...
I've been eyeballing this setup. Do either of you have Tasker? I'm wondering if it can be setup so that I don't even have to take my phone out of my pocket. Do you have to manually press a button on the Allshare dongle every time you get in the car or will it connect automatically after the initial setup?
Thanks,
Bodie
As long as arliberator is running on the phone, it should connect automatically. MOST of the time. I've changed to the wired setup using the Samsung mhl adapter. I never got the sound quality to be good using the all share cast dongle. Since I really wanted to run Pandora,sirius xm and other music apps from my phone,this was really a bust for me. I also went through the counterfeit dongle issues. I bought one on Amazon and got all the snow issues I've read other people had. I went to Samsung's website and bought it directly through them, and I've had no problems since. I've been running it a week with that setup and have had no issues. It just works like it should. I had connection issues with all share cast With it stopping at random. I'm very hopeful that all my trial and error is over.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Chromecast Tethering

Hey guys so I tether once and a while when needed with my verizon gnex which works just fine with multiple devices like my laptop and nexus 7. I figured this was a piece of cake easy thing for my chromecast as well, but it appears I was wrong. I am currently on the kevdliu 4.3 rom which continues to allow my tethering ability but for some reason my chromecast cannot seem to work with it. Even if I do manage to connect to it which is rare, I cannot then access it from another device*nexus 7*. The cast button doesnt appear and when I then run the chromecast app it states that my chromecast isnt connected and tries to go through the connection process again.
So I know you are all about to say things like "maybe it wont work on the phone" or "this should go in the chromecast threads section" which for the second I almost did, but the interesting thing is my coworker with his galaxy s4 tethered just fine between my tablet and chromecast. He has tmobile and uses the official free one through them as he isnt rooted.
any suggestions?
edit, I am now seeing something interesting. It seems that although both my laptop and tablet appear to be connected to the tethering, if I started using my laptop first then the moment I picked up my tablet it then disconnects me from the internet on my laptop.
Have you figured anything out?
I currently am in the same situation too. I don't have a home wifi yet and use tethering for most of the things I do online.
I can't get anything to work whether trying to set it up from the phone or laptop.

[Q] Screen mirroring disconnects after vpn connected

Hi, I owned a tab pro 10.1, not rooted, screen mirroring (with my Samsung TV) works fine until I connect to vpn. Does anyone know why it happens and how to resolve this? I need the vpn to connect to netflix. Appreciate any help in advance. Thanks!
Same here!
rachelng said:
Hi, I owned a tab pro 10.1, not rooted, screen mirroring (with my Samsung TV) works fine until I connect to vpn. Does anyone know why it happens and how to resolve this? I need the vpn to connect to netflix. Appreciate any help in advance. Thanks!
Click to expand...
Click to collapse
I have got this problem too. I have a Samsung notes 3, stock rom and would love to use vpn and screen mirroring for the exact same reason. As a matter of fact, this issue affects anything that uses wifi direct. VPN and wifi direct do not work together, they seem incompatible after the update to 4.4.2 kitkat. This seems a serious bug that has been very seldom discussed. Is it possible our devices have something unusual?
Vpn screen mirroring allshare cast miracast wifi direct are all terms associated with this issue.
Hi did you guys solved the problem. I too met with this issue after upgrading to kitkat. Am using note 8. Need some help from experts. Would like to watch uk programs on tv thru screen mirroring.
Is there any confirmed Android version this used to work. It's so important to me, I think I would even downgrade.
Of course it would be a lot better if there was a general solution to this problem. It seems that all trafic even the screen mirroring itself gets routed to the new address.
mysteray said:
Is there any confirmed Android version this used to work. It's so important to me, I think I would even downgrade.
Of course it would be a lot better if there was a general solution to this problem. It seems that all trafic even the screen mirroring itself gets routed to the new address.
Click to expand...
Click to collapse
I had same problem when my s4 updated to 4.4.2 so I think 4.4.1 should work. Any ideas where I can find that version and change it on my phone as I used to use vpn and allshare cast together all the time?
VPN is point to point tunneling. Therefore, it is proper to close off all other IPC channels. It is functioning property.
Sent from my SM-T320 using XDA Premium 4 mobile app
SpringerRider said:
VPN is point to point tunneling. Therefore, it is proper to close off all other IPC channels. It is functioning property.
Sent from my SM-T320 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I second that. First of all, it used to work just fine according to a couple of forum members.
Furthermore VPN is a VIRTUAL private network, making you appear, you had another IP adress to the outside world. In your local network, everything else should work.
---------- Post added at 11:46 AM ---------- Previous post was at 11:30 AM ----------
divingsfun said:
I had same problem when my s4 updated to 4.4.2 so I think 4.4.1 should work. Any ideas where I can find that version and change it on my phone as I used to use vpn and allshare cast together all the time?
Click to expand...
Click to collapse
h**p://www.samfirmware.com/
Any update on this guys? A pain in the t*ts. Its effecting my s4 & s5 both 4.4.2 rooted. A rooted s3 on a lower FW works ok but i don't want to have to keep the s3 just for that. As others posted only fails after you connect to a VPN and I need it for the same reason as others i.e. different regions of netflix.
screen mirroring
Hello, any update regarding this issue?, any ideas if this is gonna be fixed on the 5.0 lollipop update? one last question is there an aosp rom out there for the 12.2 or note 8.0 or S5 that supports screen mirroring that i can try to fix this issue, to have vpn and screen mirroring on at the same time? thank you and sorry for my poor English.
Screen Mirroring + VPN isn't working since KitKat (was working fine with Jelly Bean) for all Samsung devices (as far as I know).
There is no solution for sure as downgrade (wasn't able to do so on Galaxy Note 10.1 2014) was reported as not fixing the issue (as issue seems to be in the Kernel).
VPN with Lollipop seems quite uncertain (add new feature to select which App should use VPN or not, but lot of complaints of people about VPN simply not working).
I'm crossing fingers and I hope someone will have good news soon.
So i had this problem until i downloaded the boxpn app and miracast shortcut app. You have to have an account with boxpn but it's only 38 for 12 months. So i turn on my Samsung tv, i have a galaxy s6. Open the miracast app then turn on the vpn and it works fine. Screen mirroring and vpn
I like to stream but I can not stream and use vpn when I use screen mirroring on my phone I have a Samsung Galaxy grand is there a solution
I have tried this effort using box VPN and Miracast at the same time. It didn't worked and disconnect from WiFi.
There is only one solution for this problem you can use USB cable screenmirroring and from this if you connect with vpn it will not disconnect for reference you can checkout youtube that how to use screen mirroring using USB . Hence problem solved enjoy
Just exclude Android System from your VPN connection if your VPN app the functionality of excluding selected apps.
I had this problem for years and just suddenly came up with this idea.

Solved: Joying - Mirrorlink Stopped Working After Flash

Hey guys, I have searched high and low for a solution to this problem but have come up empty so far. I just got a joying head unit and everything, including the easy connected app, seemed to work without issue. I decided well since I had the headunit running next to my pc that I would flash Malaysk's custom rom before installing it. After that, I reinstalled the app from various sources including the oem app but none of them seem to allow me to connect my same exact devices anymore.
Why is this important for me? I had planned on controlling a tablet in the back seat for my son who is still to young to put on show without trouble. Essentially, this would allow me to never have to reach back there to help him out.
I have read, from joying, that it would no longer work after flashing new firmware but that seemed to not be the case from some things I had read here (please correct me if I am wrong on that). Tried different cables and ports but no luck. I did read that a license might need to be carried over but not sure what that entails as I can find ZERO info on this easy connected app/problem. I hope that this is a very simple fix and that I did not jump the gun again for the chance to flash a new device (its addicting and I blame XDA for my problems...).
I did try and find some other apps that might allow me to do the same thing. RemoDroid seemed promising but didn't function. Most other ones are meant for controlling from a pc or browser and just weren't useful for the task at hand. I am open to solid suggestions. I use all Android devices and avoid the Apple juice. Any insight you guys can offer will help a tired Dad out. Thanks!
Edit: Solved-ish
The easy connect app seems to function now intermittently. Not sure there was a specific thing that I did to fix it. Seems to work when I launch easy connect app right after booting up and nothing else. Messing with other apps seems to cause a problem for my devices. Also, switching between my devices(phone and tablet) may also have been causing a problem, not sure yet. I suppose I'll just keep trying to make it work reliably until I break it again.
On the previous version of the easy connect app, you were able to disable Drive Mode from launching. Not so on the newer version with Android WiFi. If anyone has a solution to that I would appreciate it as the Drive Mode app is useless for my needs.
Note 4 - USB - works great. I have yet to try over wifi
Note 10.1 N8013(lollipop rom) - USB/Wifi - works great (disable smooth mode, remote device screen cannot be turned on with easy connect "Home" button)
http://forum.xda-developers.com/and...1024x600-rk3188-joying-try-uploading-t3262030
I tried several different apk's but they all have similar results and end with a connection failure.
I haven't yet tried going back to stock firmware so that might be worth trying. I installed the headunit in my car so I'm not as willing to keep flashin it as I have to park down the street from my house.
So not sure what magic I used but I was able to get it working for a moment and then it stopped again. USB and Wifi android mirroring were working so I know my current firmware/setup is functional!! Once I got it working I started configuring some other apps and when I went to run it again it wasn't connecting. I guess I'll just keep messing with it until I can figure out what got it working again.
With the newer version of the easy connected app, I can no longer disable launching of drive mode on connect. Is there a way to disable that option with the 1.4 version?
Hi.
Is it possible mirror in wifi with android?
Can you explain the way?
Inviato dal mio SM-G920F utilizzando Tapatalk

Can't connect my Note 8 to my Samsung TV

Hi, can anyone help me. Before I put the CM 12 on my Note 8 I could connect it to my TV via Screen mirroring easily.
Now I have the possibility in the settings, but it cant find the TV.
As before both are in the same WIFI network.
I can do this with my Sony unrooted device as i could do it before.
Does someone have the right .apk or an Idea how to fix it.
I like to have just the display of the tablet on my TV nothing else.
The Samsung app from the playstore doesnt work.
Thanks Chris
wulmdiver said:
Hi, can anyone help me. Before I put the CM 12 on my Note 8 I could connect it to my TV via Screen mirroring easily.
Now I have the possibility in the settings, but it cant find the TV.
As before both are in the same WIFI network.
I can do this with my Sony unrooted device as i could do it before.
Does someone have the right .apk or an Idea how to fix it.
I like to have just the display of the tablet on my TV nothing else.
The Samsung app from the playstore doesnt work.
Thanks Chris
Click to expand...
Click to collapse
I thought CM all variants do not miracast. I think you are forced into using chrome cast, which is a pain in the bahookie.
I am using V8 SE and Boeffla kernal, it is the only firmware that miracasts as good as stock, that does what I need and then some with additional system files. It is almost as good as the tablet I have in my sig. Meaning Jelly Bean was a breeze to mod and setup to my needs... Kit Kat ha been a bear, and wont even attempt LP and Marshmellow.

Categories

Resources