Hey All,
I have searched the forum for this but i dont seem to get the same issue. And i dont want to make things worse, so i post it here. Hope you guys and galls are able to help.
So what happend. I wanted to flash back my G3 d855 16Gb Eur model.
Something allong the way went wrong, and i dont know what. All i know is that when i came back my phone was turned of. And my pc gave a failed message.
Now i cannot get in to download mode anymore. It gives me the LG boot logo and that is it.
When i want to enter download mode i get the download mode logo, with in the top left corner a verification error.
It goes quite fast so i cannot get the exact message. Can anyone point me in the direction of a fix. Ore is it indeed really dead?
Hello and thank you for using Q/A,
if you can't enter the download-mode, your mobile is dead. You may flashed a wrong firmware and the bootloader was overwritten with a wrong device.
Can you enter into Recovery?
Kind regards
Trafalgar Square
Nope, the phone reacts when i connect it to the pc. I get the android bootlogo. And when i power up with volume -, the i get the factory reset options but it dont work.
would the wiretrick help me out ?
Darkje said:
Nope, the phone reacts when i connect it to the pc. I get the android bootlogo. And when i power up with volume -, the i get the factory reset options but it dont work.
Click to expand...
Click to collapse
Can you reboot your phone into recovery mode (If it is already rooted and custom recovery installed).
I also faced a problem like that. In my problem when i reboot into download mode it took me to fastboot mode with 4 to 5 commands on left upper edge. If you can boot into that "fastboot" mode then tell me so i can help you better.
If you can't see anything like above then tell me that too i will try best to help you get out of this problem>>
No I don't get those options.
I get some kind of miss match error
exact error is:
boot verification failed
cause mismatch_sig_len
Hey All,
Just want to let you know, that i have been struggeling with my phone for two weeks. Offcourse not 24/7. But it is back alive. I managed to do the wiretrick and i was able to load up the Qualcom 9008 driver. After a long struggle i even managed to get the phone reconized by board diag. From that on it was easy to flash back all partitions. And download/firmware update mode was back. After this all i was able to flash the KDZ file.
I then lost my IMEI, but i backed up my EFS and all other importend files in the beginning. After rooting and flasing my EFS all was back to normal.
So ... i quess the d855 is indeed unbrickable
Solution
Darkje said:
Hey All,
I have searched the forum for this but i dont seem to get the same issue. And i dont want to make things worse, so i post it here. Hope you guys and galls are able to help.
So what happend. I wanted to flash back my G3 d855 16Gb Eur model.
Something allong the way went wrong, and i dont know what. All i know is that when i came back my phone was turned of. And my pc gave a failed message.
Now i cannot get in to download mode anymore. It gives me the LG boot logo and that is it.
When i want to enter download mode i get the download mode logo, with in the top left corner a verification error.
It goes quite fast so i cannot get the exact message. Can anyone point me in the direction of a fix. Ore is it indeed really dead?
Click to expand...
Click to collapse
It's not english, it is portuguese Brazil, but it works.
youtu.be/watch?v=gHAA5e2FQbU&index=1&list=LLtlXyuPzN6skeex-P2apfrQ
hi, I had this also but I can go to recovery mode but....
dksoni411 said:
Can you reboot your phone into recovery mode (If it is already rooted and custom recovery installed).
I also faced a problem like that. In my problem when i reboot into download mode it took me to fastboot mode with 4 to 5 commands on left upper edge. If you can boot into that "fastboot" mode then tell me so i can help you better.
If you can't see anything like above then tell me that too i will try best to help you get out of this problem>>
Click to expand...
Click to collapse
hi, I had this also but I can go to recovery mode but not download mode.. can you help me? thanks in advance
Related
So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:
a bit more info plz
alemale said:
So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:
Click to expand...
Click to collapse
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue
rishr4 said:
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue
Click to expand...
Click to collapse
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.
alemale said:
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.
Click to expand...
Click to collapse
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
2. There is a possibility that you could "brick" or bootloop your phone. There are two types of brick: soft (recoverable) and hard (non-recoverable). With a soft brick, the phone will not boot or keeps rebooting ("bootloop"), but it can be started in bootloader mode which allows repair of the ROM. With a hard brick, the phone won't even boot into bootloader after holding the power button for 10 seconds and the phone must be returned to HTC for service.
Click to expand...
Click to collapse
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the
PROCEDURE 1
Click to expand...
Click to collapse
then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.
rishr4 said:
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.
Click to expand...
Click to collapse
I tried to unlock the bootloader but it wanted 2.3.5 so i tried to install the new version. now it can't do anything. Well this didn't broke my heart because the phone is pretty worthless . now i have to buy new phone sooner than i planned but still all help is still accepted.
Hi, exactly the same for me : I bought the phone 2 years ago and immediately unbranded it with a goldcard, but never tried to unlock it because it was my wife's and I didn't want to risk anything.
Now she got a new phone, I wanted to play a little with the Wildfire S ^^.
In order to unlock the phone on htcdev I had to update it from 2.13.401.2 to 2.13.401.3, with RUU because can't update with OTA (different CID), with goldcard inside.
After the RUU finished, it says "congratulations everything went well", but actually the phone does not boot, stocked in a loop "quick flash / turns off", can't access bootloader, no USB detection for ADB.
Can't send it to HTC because the 2 years warranty is expired, how ironic ! :laugh:
So... if anyone does know or see any trick that could help to boot anything on this "seems to be hard-bricked" kid... huge thanks to you
Hello Im Terry
Well this is far from my first root and flashing roms to phones....
i recently got a lg g2 sprint device 4.2.2, and of course i came here to root it, now the root was simple went through fine using a method i found here on the site... after this i wanted to put a different rom on it... well i installed twrp recovery, then i was trying to boot up into recovery, it wouldnt work at all whatsoever, wether i tried turning the phone off and holding the power and volume down button, releasing when screen turns on for a second then pushing them both again... this would just load the normal sprint screen, so i would try through the twrp program to reboot into recovery and the exact same thing happened.....so i googled it and i found this method to "supposably" fix it...
teamw.in /project/twrp2/197 <----- sorry about the space there but the forum wouldnt let me post the link and i cant describe what i did to cause my problem if i cant post this link.
i used the method here with the file for sprint phones.
now after doing this i tried to reboot into recovery mode using the power and volume down method, still nothing, so then i tried through the twrp program, well what happens is a screen comes up, which when ive searched this its only people that cant get past this screen and there phone is soft bricked.... [470] fastboot mode started and on the line under that it says [520] udc_start()
this is a black screen and it stays there.... now i found a file here that a guy put on the phone to help get wifi working, which i can be happy with the phone if i cant figure out how to put a rom on the phone if i can atleast be able to tether my phone since that is one of the main reasons i root, well when i tried to flash this file using the twrp program with the phone on it rebooted to the black screen with fastboot and udc_start
so basically i cant get into recovery mode at all, and i havent been able to this entire time, i could never even get to the initial sprint option to erase all settings holding those 2 buttons down.
now obviously i want to fix this, i want to figure out how to get into recovery mode. and i just got this phone from sprint 2 days ago so it already has the sprint spark update, im not sure if that what might be causing all of this if its incompatible with sprint spark or not... i know the 1 rom i looked into said it was incompatible with it, but i didnt see anything with the others....
so after figuring out how to get into recovery mode and fix my recovery mode can someone please tell me which of the roms that are currently out for my phone are compatible with sprint spark if any. thanks so much and i hope somebody can help me. have a great day and take care
well just a quick update, i uninstalled and reinstalled twrp now this is what i get when trying to boot into recovery from the app
[470] fast mode started
520 udc_start()
690 - reset -
700 -port change-
890 STALL GET_DESCRIPTOR 128 6 1006 0 18
60710 fastboot: processing commands
Trippinshrumes said:
Hello Im Terry
Well this is far from my first root and flashing roms to phones....
i recently got a lg g2 sprint device 4.2.2, and of course i came here to root it, now the root was simple went through fine using a method i found here on the site... after this i wanted to put a different rom on it... well i installed twrp recovery, then i was trying to boot up into recovery, it wouldnt work at all whatsoever, wether i tried turning the phone off and holding the power and volume down button, releasing when screen turns on for a second then pushing them both again... this would just load the normal sprint screen, so i would try through the twrp program to reboot into recovery and the exact same thing happened.....so i googled it and i found this method to "supposably" fix it...
teamw.in /project/twrp2/197 <----- sorry about the space there but the forum wouldnt let me post the link and i cant describe what i did to cause my problem if i cant post this link.
i used the method here with the file for sprint phones.
now after doing this i tried to reboot into recovery mode using the power and volume down method, still nothing, so then i tried through the twrp program, well what happens is a screen comes up, which when ive searched this its only people that cant get past this screen and there phone is soft bricked.... [470] fastboot mode started and on the line under that it says [520] udc_start()
this is a black screen and it stays there.... now i found a file here that a guy put on the phone to help get wifi working, which i can be happy with the phone if i cant figure out how to put a rom on the phone if i can atleast be able to tether my phone since that is one of the main reasons i root, well when i tried to flash this file using the twrp program with the phone on it rebooted to the black screen with fastboot and udc_start
so basically i cant get into recovery mode at all, and i havent been able to this entire time, i could never even get to the initial sprint option to erase all settings holding those 2 buttons down.
now obviously i want to fix this, i want to figure out how to get into recovery mode. and i just got this phone from sprint 2 days ago so it already has the sprint spark update, im not sure if that what might be causing all of this if its incompatible with sprint spark or not... i know the 1 rom i looked into said it was incompatible with it, but i didnt see anything with the others....
so after figuring out how to get into recovery mode and fix my recovery mode can someone please tell me which of the roms that are currently out for my phone are compatible with sprint spark if any. thanks so much and i hope somebody can help me. have a great day and take care
Click to expand...
Click to collapse
Since your phone is only new, have you tried calling the tech support of Sprint? Or have you tried going to Sprint store to help you out with that?
to the post above me... yea that sounds like a great idea, hey sprint can you help me root my phone so i can tether without you charging me? thanks guys!... can you please not troll? if you're not going to help you dont have to respond. Thanks!
so i followed this post now, what i didnt do was patch loki on the newer vza firmware.... so i followed this thread here which is supposed to fix that... and yet im still having the same thing, btw as i posted the change in commands before its because i had my phone plugged into my computer that it showed me that.
forum.xda-developers.com/showthread.php?t=2522965
im not sure what im doing wrong here, but as i go through this i will surely document it incase someone else runs into the same problem in the future.
thanks for any help in advance
i made a mistake when i was doing this.... after everything when it says to use flashify to find the file... it wants you to find what is now the updated twrp 2.6.3.3 version and flash that as the last step... this is now complete. if anyone else runs into this in the future hopefully you dont do something slightly stupid like i did. thanks again xda developers cuz your all some genius ass people with all this info here
Trippinshrumes said:
well just a quick update, i uninstalled and reinstalled twrp now this is what i get when trying to boot into recovery from the app
[470] fast mode started
520 udc_start()
690 - reset -
700 -port change-
890 STALL GET_DESCRIPTOR 128 6 1006 0 18
60710 fastboot: processing commands
Click to expand...
Click to collapse
Turns out you have to downgrade your ABOOT, I had the same problem .. ...
http://forum.xda-developers.com/showthread.php?t=2627765
Follow those instructions to downgrade to zv7-aboot.img, then use FLASHIFY to flash the TWRP recovery image .. ...
also, the problem i was having with booting into recovery is i just have to hold the power and volume down buttons till i get the recovery menu.... not let go when the light comes on like a bunch of things say....
also if anyone knows, it says the d3rp g2 rom doesnt work on spark that it will guaranteed brick my device, now i have it fully backed up and i could just do a test run and see... although i dont feel like having to mess with that....
has anyone successfully flashed d3rp to the spark version? and if that is incompatible none of the other roms mention anything about it.... so if someone could tell me which roms do work on the spark version i would appreciate that...
also +1 to the guy that offered help after i figured it out. i appreciate it!
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?
Hi Please help!!
last night it seems that my phone pushed an ota update. my phone is in fastboot mode. i cant get out of it.
I have tried rebooting. i have tried the command fastboot reboot, and it just boot into fastboot mode again. i tried to follow this androidforums. com/optimus-v-all-things-root/598014-guide-how-get-out-fastboot.html to get out of it, but no luck. but then it ended up in download mode, witch i cant get into normaly by holding the power up an blig it in.
im hoping to flash stock softweare, but my pc cant recon my phone. i have tried to install dthe drivers and reboot alot of times, but no luck
please help, realy would hate to loose my lg g3!!
sorry for poor english
Im a newb and are real dumb when it comes to this, so please describe any solution like you would describe it to an idiot. Thanks
screenshots
here are my pgone screenshot: docs.google.com/file/d/0B8hqJbFhI7LgTi1zMnZzTG81eEk/edit?usp=docslist_api
Cant find my phone in ports so cant change the port to com41 so i can flash stock
docs.google.com/file/d/0B8hqJbFhI7LgTHRNdGFqdFQ1U3c/edit?usp=docslist_api
Is there a way to freeze the oat update?
I cant get into phone so i dont know
U have to hard reset it
Sorry
GT-p5100 xda pro
thank if you like it
Im not able to. No buttons work when i turn it on. Will nont access download mode or do a hard reset. Hard reset is holding vil down and powerbutton to the lg logo appare then release and press again?
Do what you was doing but when the screen stop release your hand fast and do it again before it start
Hard luck dude
GT-p5100 xda pro
thank if you like it
It actually worked coming into the reset screen. But after boot i just ended upp back into fastboot mode
Try to flash a firmware
GT-p5100 xda pro
thank if you like it
Don know how whenni cant get it into download mode
Indelivered it back to manufacturer and the had to change the main card and also installbthe software. Did not find out about root
Hey all. I'm thinking I may have bricked my mother's Zenfone So I was trying to help her out by installing a custom rom on the phone as she complained about the bloatware that comes with the phone slowing things down. I couldn't get the bootloader unlocked (tried every procedure under the sun), so I tried entering recovery mode and flashing the boot.img and droidboot.img directly (saw a thread where someone did this, then tried unlocking and it worked).
The phone boots into up fine but now everytime I try entering recovery mode, I get the dreaded USB logo screen. It remains there for about a minute, reboots and comes back again. Does that about 3-4 times before turning off. Is there a way to just completely get the phone back to 100% factory settings? I'd rather just starting over from there. The problem I'm having is pretty much exactly the same as what the person in the video below is experiencing....
Can you get to bootloader mode?
Sent from my ASUS_Z00AD using Tapatalk
jimchee said:
Can you get to bootloader mode?
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Sorry for the late reply. If u mean Fastboot mode, where I can see the Product name, Booloader version, etc, then no. That's where I see the USB icon.
You've screwed it up, there might be a way if you can flash a RAW image of the rom on there but you'd need to look around as I can't remember the thread name, something about recover hard brick (which is what you have)...
ultramag69 said:
You've screwed it up, there might be a way if you can flash a RAW image of the rom on there but you'd need to look around as I can't remember the thread name, something about recover hard brick (which is what you have)...
Click to expand...
Click to collapse
Hmmm. Well I came across this thread...
http://forum.xda-developers.com/zenfone2/general/unbricking-research-unbricking-method-t3162848
They seem to have procedures to help with my issue. But I came across another problem. Hopefully someone there could help with it. I post here if I succeed.
hi, I removed os from my Asus and now it is not entering fast boot mode any one can kindly help me pls.