Related
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This is first draft version, I'm not able to check it myself (I have P900 only). This is port - it's based on http://forum.xda-developers.com/showthread.php?t=2786899
Please somebody check firmware, hope it will run and we will move step by step to make it fully working. If it will work - I'll make build from sources.
Known Issues
Expect mtp problem.
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and install a compatible recovery
3. Wipe data & cache partitions and flash firmware
4. Optional: install the Google Apps additional package
Links
CyanogenMod Port:
3: V2 - original boot.img for tests -should load, but will be set of problems like mount sdcard:
2: V1 - add correct dtb.img
1: V0 - bootloop
Google Apps additional package:
set of packages - full, mini, micro, nano: http://forum.xda-developers.com/showthread.php?t=2397942
TWRP
For P900 I use 2.8.1.1 (2.8.3.0 was problem) http://forum.xda-developers.com/showthread.php?t=2706982
Thanks
Thanks to CyanogenMod team and special thank to crpalmer, his hard work on fix all problems for original SM-T525 finally allow create the port for SM-P905.
Finally! What a christmas gift!
Great, finally some development for the P905 :fingers-crossed:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Wiped data & cache, flashed the zip atached and gapps mini right away.
Not lucky, got stuck on the Galaxy note screen.
Can someone else test on the SM-P905 (without the M), and maybe with the stock kernel without modifications?
js345 said:
Great, finally some development for the P905 :fingers-crossed:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Wiped data & cache, flashed the zip atached and gapps mini right away.
Not lucky, got stuck on the Galaxy note screen.
Can someone else test on the SM-P905 (without the M), and maybe with the stock kernel without modifications?
Click to expand...
Click to collapse
what version you use?
Valera1978 said:
what version you use?
Click to expand...
Click to collapse
my twrp is 2.8.0.0
and here's my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.P905MUBUAND1
ro.build.version.incremental=P905MUBUAND1
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Mon Apr 7 20:55:04 KST 2014
ro.build.date.utc=1396871704
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD3911
ro.build.tags=release-keys
ro.product.model=SM-P905
ro.product.brand=samsung
ro.product.name=viennaltexx
ro.product.device=viennaltexx
ro.product.board=universal5420
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=viennalte
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=tablet
# Samsung Specific Properties
ro.build.PDA=P905MUBUAND1
ro.build.hidden_ver=P905MUBUAND1
ro.build.changelist=1253936
ro.product_ship=true
ro.chipname=MSM8974
ro.build.knox.container=
# end build properties
#
# from device/samsung/viennalte/system.prop
#
#
# system.prop for Vienna LTE. excerpted from MSM8974 qcom original system.prop
#
ro.sf.lcd_density=320
#
# system.prop for msm8974
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.decode=false
lpa.use-stagefright=false
persist.speaker.prot.enable=false
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#SLook
ro.slook.ver=1
# System property for storage_preload
persist.sys.storage_preload=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
ro.build.scafe=latte
ro.build.scafe.size=grande
ro.build.scafe.shot=double
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=false
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=2
security.mdpp.result=None
ro.sec.fle.encryption=true
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.security.mdpp.ux=Enabled
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4.2_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.timaversion=2.0
ro.config.knox=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
js345 said:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Click to expand...
Click to collapse
The rodpp kernel is for a TouchWiz stock ROM, it will not work with any AOSP based ROM.
CM11 V0= Boot Loop
V1= Freeze on Samsung Screen with SE warning in Top Left corner
V2= Freeze on Samsung Screen no Warning.
V3 pending
arcadia2uk said:
The rodpp kernel is for a TouchWiz stock ROM, it will not work with any AOSP based ROM.
Click to expand...
Click to collapse
I meant I had the rodpp kernel before flashing CM11, but i assumed that in the flashing process, a new kernel is flashed toghether, but i'm not sure about it.
Is that so? Or do I have to flash a new compatible kernel after flashing the CM11? Although i've tried to learn before, honestly i dont even fully understand what exactly is a kernel.
js345 said:
I meant I had the rodpp kernel before flashing CM11, but i assumed that in the flashing process, a new kernel is flashed toghether, but i'm not sure about it.
Is that so? Or do I have to flash a new compatible kernel after flashing the CM11? Although i've tried to learn before, honestly i dont even fully understand what exactly is a kernel.
Click to expand...
Click to collapse
First you need to make a backup of your current ROM and Data to the external SD, I also suggest separate Data partition, or a Titanium BU after this, as it will facilitate the re-installation of your favorite apps.
After this advanced wipe your; dalvik cache | cache | system | data | internal SD
The CyanogenMod ROM contain both system and kernel, no separate install is necessary
Since your Tab is freshly wiped, it doesn't matter what you had before.
First, thanks so much for P905 - the best tablet out there - developement...
The feedback is however somehow hard to understand.
Can someone summarize if any of those builds work (ie. boot at least...) at the moment?
esgie said:
First, thanks so much for P905 - the best tablet out there - developement...
The feedback is however somehow hard to understand.
Can someone summarize if any of those builds work (ie. boot at least...) at the moment?
Click to expand...
Click to collapse
Me and Rusty-island tested and both of us got bootloop. Valera1978 removed the link to the rom. Maybe he is preparing a new version. He doesn't have the device, so he is developing in the dark and needs fast and precise feedback. :fingers-crossed:
js345 said:
Me and Rusty-island tested and both of us got bootloop. Valera1978 removed the link to the rom. Maybe he is preparing a new version. He doesn't have the device, so he is developing in the dark and needs fast and precise feedback. :fingers-crossed:
Click to expand...
Click to collapse
Hi! Just to say that I am also stuck at the samsung logo screen on boot. If I can help in some way, let me know.
valera1978 said:
i'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
this is first draft version, i'm not able to check it myself (i have p900 only). This is port - it's based on .........
thanks
thanks to cyanogenmod team and special thank to crpalmer, his hard work on fix all problems for original sm-t525 finally allow create the port for sm-p905.
Click to expand...
Click to collapse
awesome!!!! Thanks for such awesome rom!
---------- Post added at 10:25 AM ---------- Previous post was at 10:24 AM ----------
Looking forward for new updates!
Valera1978 said:
CyanogenMod Port:
3: V2 - original boot.img for tests -should load, but will be set of problems like mount sdcard:
2: V1 - add correct dtb.img
1: V0 - bootloop
Click to expand...
Click to collapse
Thanks again for the rom. It's been some time that no new version has been posted (V2 being stuck at Samsung Logo). Do you have ideas on how to solve the problem and are you still working on it? If I can be of any help for testing, it will be a pleasure.
updates? Looking forward for that! Please count me in if you need any feedback logs..
@Valera1978
Hey, first off, thank you for your efforts! :good:
And please, don't give up! You are actually have been the only dev to create such awesome thing to out P905 and P905M.
So THANK YOU, and please KEEP IT UP.
Afaik dev has removed links to the roms. Is it however possible to reupload, even non-working, roms again? If the problem is in the kernel itself only, the community might be able to find a way to run the roms by modifying available kernels, so they still may be highly usable.
Hope the developement will be continued....
+1
I would love to see this project get back again. It would be awesome to run CM into our devices.
u mentioned this is a port for the P905..this is the verison varaint correct?..my model number has a V on the end of P905..did you leave the V out or is this another varaint?...this is only rom ive found for the verison varaint ..hope this is for it..cause there is nothing else..im assumeing im gonna go ahead root with towel root,flash twrp recovery for theverison variant,then install this rom,cause its only one with my model number...is this a stable rom yet?...thanks in advance for any assistanse or response..and thank you for the hARD WORK ON THE ROM!! WE ALL APPRECIATE IT
edit-...OK IN SEE THIS ISNT SUPPORTED ANY LONGER...SORRY...ANY ROMS FOR THE sm-p905v VERISON VARIANT YET..DONT SEE ANY YET..
It's not stable yet and work was started on the rom and then it stopped suddenly... hopefully the dev picks it back up or another dev does... these are great tablets would be awesome to get a working rom for the p905 versions
Based on ROM:
G920PVPS4CPI3
ROM OS Version:
6.0.1 Marshmallow
ROM Kernel: (Choice by aroma)
1. STOCK Linux 3.10.61
2. SkyHigh 3.34 Linux 3.10.101
3. SuperNOVA 7-9-16 Linux 3.10.x
Features:
- Aroma Installer
- Deodexed
- Rooted
- Busybox
- Multi-User
- Knox Removed
- ItsOn Removed
- Sprint App Removed
- Multi CSC (56)
- Multi Languages (En, Fr, Ar, . . . )
- CSC features
- build.prob tweaks
- Edge Features
- GSM/WCDMA/LTE enabled ( and CDMA/EVDO V 1.1)
- FM Radio (works at 50%,The signal is very weak)
- Screen lock does not work and f-print
How to install:
You MUST be on 6.0.1 Firmware to flash these Rom
1) Make a backup of your existing rom and any apps;
2) Place rom zip in internal storage;
3) Boot into recovery and wipe cache, dalvik and data;
4) Flash rom.
Download V 1.1 md5: 01d9f0b2422d98a0ab999c10a5fe17e3
XDA:DevDB Information
RomAB, ROM for the Sprint Samsung Galaxy S6
Contributors
abbn78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 6.0.1
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-11-29
Created 2016-10-25
Last Updated 2016-10-25
How is this different than the other Edge Multi ROM?
This ROM is fully multilingual ! : ( en_GB ; en_US ; fr ; de ; es;af;agq;ak;am;ar;ar_AE;ar_BH;ar_DZ;ar_EG;ar_IQ;ar_JO;ar_LB;ar_MA;ar_SA;ar_SY;ar_TN;ar_YE; . . . ).
Good job brother Rom wonderful. But the screen lock does not work and fprint!?
thank you for the work, i couldn't get data to work, might have been my phone, going to odin back to stock and retry. fyi new firmware CPJ1 just released today
This ROM Saved MY PHONE with the MULTI CSC , get Stucked with a wrong 920p Firmwarez !! Great Jobs
My Original Issue
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks
Mr.X007 said:
Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks
Click to expand...
Click to collapse
try this CSC Changer or this .
dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
Make restoring your backup efs !
abbn78 said:
try this CSC Changer or this .
Click to expand...
Click to collapse
Thanks! Will try.
you can make full grace Ux rom ???
Fix screen lock
omer.sati said:
Good job brother Rom wonderful. But the screen lock does not work and fprint!?
Click to expand...
Click to collapse
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?
Bealex317 said:
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?
Click to expand...
Click to collapse
Download : Fix Lock screen & Fingerprint
1) Place rom zip in internal storage;
2) Boot into recovery and wipe cache and dalvik;
3) Flash this file.
dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.
gsaalmeida said:
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.
Click to expand...
Click to collapse
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
Original file :
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920PVPS4CPI3
ro.build.version.incremental=G920PVPS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:53:14 KST 2016
ro.build.date.utc=1474332794
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6321
ro.build.tags=release-keys
ro.build.flavor=zerofltespr-user
ro.product.model=SM-G920P
ro.product.brand=samsung
ro.product.name=zerofltespr
ro.product.device=zerofltespr
ro.product.board=universal7420
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zerofltespr
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zerofltespr-user 6.0.1 MMB29K G920PVPS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPS4CPI3:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=G920PVPS4CPI3
ro.build.hidden_ver=G920PVPS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofltespr/system.prop
#
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
#rild.libpath=/system/lib64/libsec-ril.so
rild.libpath=/system/lib64/librilswitch.so
rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
ro.sf.lcd_density=640
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Use CP SE13 Table
persist.radio.use_se_table_only=1
# Default ECCList
ro.ril.ecclist=911,#911,*911
# QMI mux enabled for Fusion 4.0 (For APQ8084 model, MDM9x35)
persist.rmnet.mux=enabled
# Use CDMALTE Phone (For 4G model)
telephony.lteOnCdmaDevice=1
# Support Global Mode (For global mode model)
ro.config.multimode_cdma=1
# Data modules (For evolution RIL model)
ro.use_data_netmgrd=false
persist.data.netmgrd.qos.enable=false
# Use data service state for signal display (Except USC CS model)
ro.config.combined_signal=true
# Default Network Mode (For 4G / Global model)
ro.telephony.default_network=10
# Chameleon Default Operator (SPR with Chameleon)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.dmverity=true
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=911,#911,*911
ril.subscription.types=NV,RUIM
ro.com.android.dataroaming=true
ro.telephony.default_network=10
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
ro.sf.lcd_density=480
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
ro.security.mdpp.ux=Enabled
ro.frp.pst=/dev/block/persistent
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0x0a6245af52fb585c8dd00943e4f8d2e1c3dfdb1e000000000000000000000000
Modified file (to support GSM networks) :
Code:
# begin build properties
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920FXXS4CPI3
ro.build.version.incremental=G920FXXS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:56:53 KST 2016
ro.build.date.utc=1474333013
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHC3716
ro.build.tags=release-keys
ro.build.flavor=zerofltexx-user
ro.product.model=SM-G920F
ro.product.brand=samsung
ro.product.name=zerofltexx
ro.product.device=zerofltexx
ro.product.board=universal7420
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=exynos5
ro.build.product=zeroflte
ro.build.description=zerofltexx-user 6.0.1 MMB29K G920FXXS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS4CPI3:user/release-keys
ro.build.characteristics=nosdcard
ro.build.PDA=G920FXXS4CPI3
ro.build.hidden_ver=G920FXXS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofte/system.prop
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
# rild.libpath=/system/lib64/libsec-ril.so
# rild.libpath=/system/lib64/librilswitch.so
# rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
# rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
# persist.timed.enable=true
[COLOR="Blue"]# General GSM Settings *********************
ro.telephony.default_network=9[/COLOR]
# ro.ril.def.preferred.network=9
[COLOR="Blue"]telephony.lteOnCdmaDevice=0
telephony.lteOnGsmDevice=1
ro.config.multimode_cdma=0[/COLOR]
persist.ril.modem.mode=2
persist.radio.vzw.cdma.mdn=deleted
ro.telephony.gsm-routes-us-smsc=0
persist.radio.ap.phonetype=1
persist.radio.lte.mm.disable=1
persist.ril.features=0x102
ro.HorizontalBUA=false
ro.HorizontalVVM=false
ro.telephony.ril.v3=signalstrength,skipbrokendatac all,writeaidonly
ro.telephony.ril.config=writeaidonly,signalstrength
telephony.rilV7NeedCDMALTEPhone=false
ro.cdma.subscribe_on_ruim_ready=false
persist.ril.mux.noofchannels=10
ro.cdma.nbpcd=0
ro.cdma.subscription=0
ro.com.android.dataroaming=false
ro.radio.networkmode=enable
ro.telephony.get_imsi_from_sim=true
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
ro.telephony.call_ring.delay=0
# For sys info indication
persist.radio.add_power_save=1
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
fw.max_users=3
fw.show_multiuserui=1
fw.show_hidden_users=1
fw.power_user_switcher=1
#Adb
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Enable ADB Debugging By Default & Disable USB Debugging
androidboot.selinux=0
boot.fps=20
shutdown.fps=20
mot.proximity.delay=15
persist.cne.feature=0
persist.mtp.notify=0
persist.usb.notify=0
pm.sleep_mode=1
ro.config.dmverity=false
ro.config.knox=0
ro.config.nocheckin=1
ro.config.tima=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.lge.proximity.delay=15
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.ril.disable.power.collapse=0
ro.ril.enable.amr.wideband=1
ro.ril.fast.dormancy.rule=0
ro.securestorage.knox=false
ro.securestorage.support=false
ro.security.mdpp.ux=Disabled
ro.sys.fw.use_trim_settings=true
security.knox_kap_mode=false
sys.config.samp_spcm_enable=false
sys.config.spcm_db_enable=false
sys.config.spcm_db_launcher=false
sys.config.spcm_preload_enable=false
sys.config.spcm_gcm_kill_enable=false
wlan.wfd.hdcp=disable
##
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=112,911,#911,*911
ril.subscription.types=NV,RUIM
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
# ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
#ro.setupwizard.network_required=false
#ro.setupwizard.mode=OPTIONAL
ro.setupwizard.mode=DISABLED
# ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
# ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0xeea345a12651beb6c5b486f30968e49fa48eb5ef000000000000000000000000
dalvik.vm.checkjni=false
dalvik.vm.dexopt-flags=m=y
dalvik.vm.dexopt-flags=m=y,v=n,o=v
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
lpa.decode=false
lpa.use-stagefright=false
media.stagefright.enable-aac=true
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
media.stagefright.enable-scan=true
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8
net.tcp.buffersize.hspa=6144,87380,524288,6144,163
net.tcp.buffersize.lte=524288,1048576,2097152,5242
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
persist.sys.shutdown.mode=hibernate
persist.sys.ui.hw=1
power.saving.mode=1
power_supply.wakeup=enable
profiler.force_disable_err_rpt=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.config.disable.hw_accel=false
ro.config.hw_fast_dormancy=1
ro.config.hw_menu_unlockscreen=false
ro.config.hw_power_saving=1
ro.product.gpu.driver=1
ro.ril.def.agps.mode=1
ro.ril.sensor.sleep.control=1
ro.secure=0
video.accelerate.hw=1
wifi.supplicant_scan_interval=180
windowsmgr.max_events_per_sec=100
ro.media.enc.jpeg.quality=95
Has anyone gotten this to work on Sprint S6, if so what steps did you take
wright0101 said:
Has anyone gotten this to work on Sprint S6, if so what steps did you take
Click to expand...
Click to collapse
This ROM for Sprint S6 (G920P), with multi csc (56 regions) modified to operate in GSM networks and with different languages support (En, Fr, Ar ...), that are not supported in the original ROM Sprint (G920P SPR).
I am currently sim locked. If I flash this rom do I get sim unlock?
abbn78 said:
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
[/CODE]
Click to expand...
Click to collapse
its possible to enable gsm and umts setting without modding build.prop i enabled it in my next rom version without build.prop
i fixed it through some csc codes
and also your rom doesn't access hiddenmenu through adb its useful to fix NV
MIUI CAMERA FOR ZUK Z2
Found a way to use MIUI camera in our Device Zuk Z2.
Download
Updated Zip No Tweaks Required https://goo.gl/tCjQ8c
Old version MIA1 camera.zip :https://goo.gl/djA8hb
Procedure
Flash the zip via TWRP and its done
Legacy Method
Now, you need to edit Build.prop - either use an app or root explorer to edit it.
BUILD.PROP CHANGES ::
ro.product.device=gemini
This will trick the camera app to think that your phone is a MI5 and all features like manual mode, focus peeking, beautify, audio focus, slomo will start working
KNOWN BUGS
panorama,group selfie
Enjoy:fingers-crossed:
Works great ...:laugh:
I disabled the original cyanogen camera app for this
work great
thanks man !
Manual mode doesn't work completely :/
ISO and shutter speed don't
Any workaround for that?
rutvora said:
Manual mode doesn't work completely :/
ISO and shutter speed don't
Any workaround for that?
Click to expand...
Click to collapse
Did you edit the build.prop?
It should look like this
spandu500 said:
Did you edit the build.prop?
Click to expand...
Click to collapse
Yes I did change the ones mentioned in initial post
I am on official AEX 4.6
There are 2 more lines in build.prop
Ro.product.model
Ro.aex.device
And there are some camera tweaks in there too:
persist.camera.imglib.fddsp=1
persist.camera.llc=1
persist.camera.llnoise=1
persist.camera.stats.test=0
camera.disable_zsl_mode=1
Do I have to change any of these too?
rutvora said:
Yes I did change the ones mentioned in initial post
I am on official AEX 4.6
There are 2 more lines in build.prop
Ro.product.model
Ro.aex.device
And there are some camera tweaks in there too:
persist.camera.imglib.fddsp=1
persist.camera.llc=1
persist.camera.llnoise=1
persist.camera.stats.test=0
camera.disable_zsl_mode=1
Do I have to change any of these too?
Click to expand...
Click to collapse
Maybe just maybe zsl affecting shutter time
spandu500 said:
Maybe just maybe zsl affecting shutter time
Click to expand...
Click to collapse
Changed that... and no, still not working
Do you or anyone else mind sharing your build.prop file here just for me to compare mine with?
Here we go
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=N2G47H
ro.build.display.id=z2_plus-userdebug 7.1.2 N2G47H e248a12119 test-keys
ro.build.version.incremental=e248a12119
ro.build.version.sdk=25
ro.build.version.preview_sdk=0
ro.build.version.codename=UNOFFICIAL
ro.build.version.all_codenames=REL
ro.build.version.release=7.1.2
ro.build.version.security_patch=
ro.build.version.base_os=
ro.build.date=Thu Sep 14 09:31:01 UTC 2017
ro.build.date.utc=1505381461
ro.build.type=userdebug
ro.build.user=root
ro.build.host=instance-1
ro.build.tags=test-keys
ro.build.flavor=citrus_z2_plus-userdebug
ro.product.brand=Xiaomi
ro.product.name=gemini
ro.product.board=msm8996
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=Xiaomi
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=msm8996
# ro.build.product is obsolete; use ro.product.device
ro.build.product=z2_plus
ro.product.model=Mi 5
ro.product.device=gemini
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=z2_plus-user 7.0 NRD90M 2.5.412_170428 release-keys
ro.build.fingerprint=ZUK/z2_plus/z2_plus:7.0/NRD90M/2.5.412_170428:user/release-keys
ro.build.characteristics=nosdcard
ro.citrus.device=z2_plus
# end build properties
#
# from device/zuk/z2_plus/system.prop
#
# Audio
af.fast_track_multiplier=1
audio_hal.period_size=192
audio.dolby.ds2.enabled=false
audio.dolby.ds2.hardbypass=false
audio.deep_buffer.media=true
audio.heap.size.multiplier=7
audio.offload.buffer.size.kb=64
audio.offload.gapless.enabled=true
audio.offload.multiaac.enable=true
audio.offload.multiple.enabled=false
audio.offload.passthrough=false
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.track.enable=true
audio.offload.video=true
audio.parser.ip.buffer.size=262144
audio.safx.pbe.enabled=true
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.audio.fluencetype=fluence
ro.qc.sdk.audio.ssr=false
tunnel.audio.encode=false
use.voice.path.for.pcm.voip=true
# Bluetooth
bt.max.hfpclient.connections=1
qcom.bluetooth.soc=rome
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.wipower=true
# Camera
persist.camera.imglib.fddsp=1
persist.camera.llc=1
persist.camera.llnoise=1
persist.camera.stats.test=0
camera.disable_zsl_mode=1
# CNE
persist.cne.feature=1
# Data modules
persist.data.mode=concurrent
persist.data.netmgrd.qos.enable=true
ro.use_data_netmgrd=true
persist.data.iwlan.enable=true
# Device was launched with M
ro.product.first_api_level=23
# Display (Qualcomm AD)
ro.qualcomm.cabl=2
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/calib.cfg
ro.qcom.ad.sensortype=2
# Fingerprint
persist.qfp=false
# Flip panel
persist.panel.inversemounted=1
ro.panel.mountflip=3
# Google
ro.opa.eligible_device=true
# Graphics
debug.gralloc.enable_fb_ubwc=1
persist.hwc.enable_vds=1
ro.opengles.version=196610
ro.sf.lcd_density=480
sdm.perf_hint_window=50
# GPS
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
# Hdmi
persist.speaker.prot.enable=true
qcom.hw.aac.encoder=true
# Higher fling velocities for smooth scrolling and to provide better responsiveness - From HalogenOS Team
ro.min.fling_velocity=160
ro.max.fling_velocity=20000
# Media
flac.sw.decoder.24bit.support=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
use.qti.sw.alac.decoder=true
use.qti.sw.ape.decoder=true
# NITZ
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
# Perf
ro.am.reschedule_service=true
ro.min_freq_0=307200
ro.min_freq_4=307200
ro.sys.fw.bg_apps_limit=60
ro.vendor.extension_library=libqti-perfd-client.so
# Radio
DEVICE_PROVISIONED=1
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.telephony.default_network=22,22
ro.telephony.default_cdma_sub=0
ro.telephony.call_ring.multiple=false
persist.data.qmi.adb_logmask=0
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.net.doxlat=true
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.custom_ecc=1
persist.radio.flexmap_type=dds
persist.radio.force_on_dc=true
persist.radio.hw_mbn_update=1
persist.radio.multisim.config=dsds
persist.radio.primarycard=true
persist.radio.rat_on=combine
persist.radio.sib16_support=1
persist.radio.sw_mbn_volte=1
persist.radio.sw_mbn_openmkt=1
persist.radio.sw_mbn_update=1
# RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
# TimeService
persist.timed.enable=true
# Assertive Display
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/ad_calib.cfg
ro.qcom.ad.sensortype=2
ro.qualcomm.cabl=0
# ADB
ro.adb.secure=0
ro.secure=0
ro.allow.mock.location=1
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
# Higher fling velocities
# for smoother scrolling and better responsiveness
ro.min.fling_velocity=160
ro.max.fling_velocity=20000
# Opts by MOVZX
# Spare some RAM
persist.sys.purgeable_assets=1
# Dex2oat threads for faster app installation
# Use all 4 Cores/Threads of our CPU
ro.sys.fw.dex2oat_thread_count=4
dalvik.vm.dex2oat-threads=4
dalvik.vm.image-dex2oat-threads=4
debug.generate-debug-info=false
# SafetyNet
ro.boot.verifiedbootstate=green
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.config.ringtone=Zen.ogg
ro.config.notification_sound=Chime.ogg
ro.carrier=unknown
ro.config.alarm_alert=Flow.ogg
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=288m
dalvik.vm.heapsize=768m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
persist.debug.wfd.enable=1
ro.com.google.clientidbase=android-google
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.mobiledata=false
ro.build.selinux=1
ro.opa.eligible_device=true
persist.sys.dun.override=0
media.sf.omx-plugin=libffmpeg_omx.so
media.sf.extractor-plugin=libffmpeg_extractor.so
persist.sys.recovery_update=false
BUILD_DISPLAY_ID=N2G47H
citrus.ota.version=CitrusCAF-z2_plus-3.5-TANGERINE-UNOFFICIAL-20170914
ro.citrus.version=3.5-TANGERINE
ro.modversion=CitrusCAF-z2_plus-3.5-TANGERINE-UNOFFICIAL-20170914
ro.citrus.buildtype=UNOFFICIAL
ro.citrus.flavour=TANGERINE
ro.bionic.ld.warning=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.bootimage.build.fingerprint=ZUK/z2_plus/z2_plus:7.1.2/N2G47H/e248a12119:userdebug/test-keys
ro.expect.recovery_id=0x64e3cb4492e3ba7de38304f02fe9c242893ff81f000000000000000000000000
Deleted
Seemed to work before the buildprop changes took effect. After flashing the zip, I managed to take some photos, I edited b.p through kernel auditor and rebooted. Since, I get the following error when taking a picture with the back facing camera. I am able to shoot video and 5ake selfies though.
Pease advise, noob here, but seems like something that should be solvable.
I am on AEX 4.6 as well.
Build prop
Where to edit these name..?
I am new to this stuff i dnt knw much abt it.
I am using aicp rom on my z2 plus..will b glad if u could help
---------- Post added at 03:37 AM ---------- Previous post was at 03:33 AM ----------
Where to edit these names...?
I am new to this stuff i dnt knw much abt it.
I am using aicp rom on my z2 plus....will b glad if u could help
I tried to flash this zip but got an error, I am on aex4.6 official build. Please help.
_.nish99_ said:
Where to edit these name..?
I am new to this stuff i dnt knw much abt it.
I am using aicp rom on my z2 plus..will b glad if u could help
---------- Post added at 03:37 AM ---------- Previous post was at 03:33 AM ----------
Where to edit these names...?
I am new to this stuff i dnt knw much abt it.
I am using aicp rom on my z2 plus....will b glad if u could help
Click to expand...
Click to collapse
Edit these lines in build.prop in /system/ folder using mixplorer or build.prop editor
anubhavdipta said:
I tried to flash this zip but got an error, I am on aex4.6 official build. Please help.
Click to expand...
Click to collapse
Send ss of error in twrp
dibt359 said:
Seemed to work before the buildprop changes took effect. After flashing the zip, I managed to take some photos, I edited b.p through kernel auditor and rebooted. Since, I get the following error when taking a picture with the back facing camera. I am able to shoot video and 5ake selfies though.
Pease advise, noob here, but seems like something that should be solvable.
I am on AEX 4.6 as well.
Click to expand...
Click to collapse
Reboot fixes the issue for me
Flash help
Hey do I need to wipe anything before flashing the zip please help a newbie here
spandu500 said:
Send ss of error in twrp
Click to expand...
Click to collapse
Here it is
HALF GSI XA1
What's new :
-Night mode
-CPU governors
-Added support of treble for next updates (now stock GSI image brick XA1)
-IMS patch (VoLTE , ViLTE) - (disabled,turned off functions in menu from VoLTE/ViLTE turn on/off)
-Soon support for 5G networks
-Support for project Treble
-Temporarily saved stock build prop from sony with mods , for compatibility of sony apps
-LCD density is temporarily changed to 380
-Pre rooted system and kernel (magisk)
-Sdcardfs - Some devices have sdcardfs kernel panicking on 8.0 . Disable for everyone for the moment ro.sys.sdcardfs=0
-Features and fixed kernel bugs , earlier patches from earlier kernel version
-Fast Charge
-Other patches
Alpha Android 8.1 :
Kernel V2 (only 8.1) (Kernel can not working correct on 8.0 !!) :
-Faster boot
-Kernel is permissive
-VoLTE switch (You can enable) (IMS)
-ViLTE (IMS)
-VoWIFI (IMS)
-VideoCall (IMS)
-Interface UT (IMS)
-Longer battery live (few hours more)
-More free RAM
KERNEL V3 - Patched kernel and system (only 8.1) :
-Multi Window
-Performance Tweaks
-Better Ram Management
-More Battery Efficiency
-Streaming Tweaks
-Net Sped Tweaks
-DNS Tweaks
-System Tweaks
-GCAM Implementation
-Responsiveness Tweaks
Android 8.1 R2 :
-CPU tweaks
-Fonts Tweaks (fonts from pie)
-Patch for VoWIFI
-Support for 802.11r
Added Init.d Tweak
-Zipalign
-Ram_Optimize
-Sqlite_Optimize
-System_Tweaks
-Ext4_Lag_Fix
-Net_Speed_Tweak
-Remount_Full_Ext4
System 8.1 have disabled features added by google and other features for performance .
System is same as 8.0 with saved and patched build.prop .
EXTRA LINE ADDED LINES :
Code:
ro.HOME_APP_ADJ=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.sys.shutdown.mode=hibernate
persist.sys.scrollingcache=3
persist.android.strictmode=0
# Audio and Video Quality Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.mp3.enabled=1
ro.media.dec.vid.mp4.enabled=1
ro.media.enc.aud.wma.enabled=1
ro.media.enc.vid.wmv.enabled=1
ro.media.enc.aud.mp3.enabled=1
ro.media.enc.vid.mp4.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.H.264.enabled=1
ro.media.enc.aud.flac.enabled=1
ro.media.enc.vid.H.264.enabled=1
# Battery Efficiency Tweaks
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Performance Tweaks
debug.performance.tuning=1
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Steaming Tweaks
media.stagefright.enable-http=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.stagefright.enable-record=true
# Net Speed Tweak
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv6.tcp_ecn=0
net.ipv6.route.flush=1
net.ipv6.tcp_rfc1337=1
net.ipv6.ip_no_pmtu_disc=0
net.ipv6.tcp_sack=1
net.ipv6.tcp_fack=1
net.ipv6.tcp_window_scaling=1
net.ipv6.tcp_timestamps=1
net.ipv6.tcp_rmem=4096 39000 187000
net.ipv6.tcp_wmem=4096 39000 187000
net.ipv6.tcp_mem=187000 187000 187000
net.ipv6.tcp_no_metrics_save=1
net.ipv6.tcp_moderate_rcvbuf=1
net.tethering.noprovisioning=true
# IPV4 and IPV6 Support
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# 3G/4G Tweaks
ro.ril.hsxpa=2
ro.ril.hspa=2
ro.ril.lte=2
ro.ril.lte=2
ro.ril.ltea=2
ro.ril.hep=1
ro.ril.enable.3g.prefix=1
ro.ril.enable.4g.prefix=1
ro.ril.enable.dtm=1
ro.ril.hspaclass=15
ro.ril.lteclass=15
ro.ril.gprsclass=15
ro.ril.hsupa.category=10
ro.ril.hsdpa.category=30
ro.ril.lte.category=10
ro.ril.ltea.category=30
ro.ril.enable.a51=1
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.a54=1
ro.ril.enable.a55=1
persist.cust.tel.eons=1
# DNS Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.wcdma.dns1=8.8.8.8
net.wcdma.dns2=8.8.4.4
net.hspa.dns1=8.8.8.8
net.hspa.dns2=8.8.4.4
net.lte.dns1=8.8.8.8
net.lte.dns2=8.8.4.4
net.ltea.dns1=8.8.8.8
net.ltea.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
# Gaming Tweaks
persist.sys.NV_FPSLIMIT=90
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=30
# Dalvik Virtual Machine Tweaks
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
# Responsiveness & Speed Tweaks
ro.telephony.call_ring.delay=0
ro.ril.enable.amr.wideband=1
ro.lge.proximity.delay=25
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.config.vc_call_default=10
# Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
# Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# System Tweaks
ro.config.hw_quickpoweron=true
ro.config.hw_fast_dormancy=1
ro.securestorage.knox=false
ro.telephony.sms_segment_size=160
ro.mot.eri.losalert.delay=1000
video.accelerate.hw=1
ro.config.disable.hw_accel=false
video.accelerate.hw=1
# Camera Tweaks Supports Google Camera
persist.camera.HAL3.enabled=1
camera.HAL3.enabled=1
persist.camera.eis.enable=1
camera.eis.enable=1
persist.camera.is_mode=4
camera.is_mode=4
persist.camera.disable_zsl_mode=1
camera.disable_zsl_mode=1
persist.camera.gyro.android=4
camera.gyro.android=4
persist.camera.tof.direct=1
camera.tof.direct=1
persist.camera.tnr.preview=1
camera.tnr.preview=1
persist.camera.tnr.video=1
camera.tnr.video=1
ro.camera.notify_nfc=1
camera.notify_nfc=1
persist.sys.debug.multi_window=true
persist.sys.overlay.nightmode=true
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
go.build.system_root_image=true
ro.config.low_ram=true
debug.sf.nobootanimation=1
persist.sys.shutdown.mode=hibernate
dalvik.vm.heapsize=72m
persist.adb.notify=0
persist.sys.debug.multi_window=true
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.telephony.call_ring.delay=0
ring.delay=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
wifi.supplicant_scan_interval=180
persist.sys.purgeable_assets=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
debug.performance.tuning=1
Some IMS options/services can don't work on your device if you are from more restricted countries , that's not a BUG .
If you are from restricted countries don't say about BUG . Check first your phone provider .
Few features can don't work in this alpha V2 rom . This is cross of new and old version of oreo 8.1 . Soon next version please wait .
This alpha is stable and ready to use . Please turn off animation (look on screenshot) , for fix all bug's in this rom , eariler rom and next releases .
First alpha of 8.1 soon . You can check in the comment screenshots from my own stability tests .
Who want to help me soon with fix any bug's in new android versions i welcome to write to me pm
First release give you oreo , after oreo i make pie for you with your help (bug fixing) . To start make a pie image for XA1 .
DOWNLOAD
MEGA 8.0
MEGA 8.1 Alpha
Drive 8.1 Alpha
MEGA 8.1 R2
LAST R4 RELEASE IS NOW AVAILABLE HERE !!
AFTER DOWNLOAD MY SYSTEM , PLEASE RESTORE ALL !!!! BOOT,RECOVERY.SYSTEM - MAKE COMPLETE RESTORE OR YOU BRICK YOUR PHONE HARD !!!! . FILE FOR RESTORE PATH : YOUR_XPERIA\SD CARD\TWRP\BACKUPS\YOUR_DEVICE_ID\MY RESTORED SYSTEM FOLDER
If you like or download my system , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks
https://paypal.me/marek10747
MY OWN REPO (can be unstable !!!!) :
VENDOR
Important Info for other developers :
If you want to use files from my repo I say YES , but you must : 1.say about me in you thread 2.allow me to make and publish mod this files for better my android versions 3.send me a private message . If you don't do 1,2,3 i make submit your file to XDA . Thanks for use points 1,2,3
My Facebook group :
Facebook support group , for all devices !!
More after first alpha . First version is preview only .
This ROM don't have BUGS (possibly) . If you find BUG write comment .
reserved
for the moment it works fine! )
Very interesting.
Please post detailed step by step, I could not understand the steps of the OP.
boyrock said:
Very interesting.
Please post detailed step by step, I could not understand the steps of the OP.
Click to expand...
Click to collapse
I can't write a post step by step , because I'm from Poland and my English is not perfect and now i can't do that more better/perfect . You can help me say that better .
VoLTE switch
MAREK10747 said:
I can't write a post step by step , because I'm from Poland and my English is not perfect and now i can't do that more better/perfect . You can help me say that better .
Click to expand...
Click to collapse
You can send in your language and i can translate for you.
boyrock said:
You can send in your language and i can translate for you.
Click to expand...
Click to collapse
Ok . I do that tommorow .
No animation
8.1 Oreo alpha is coming soon !!
Battery special patch tested and working correctly . Reworked stamina mode for user's you need only make few optimizations and turn on stamina . Next time charge battery to 100% . That's all your device is ready.
who's interested project ????
Base of link's .
https://drive.google.com/file/d/18v43Z6C9EkI71huAQiYKHvyMMGEyO26s/view?usp=sharing
https://drive.google.com/file/d/1AIpGHJlglAuqRwzXMryUL3emQK2b-gvO/view?usp=sharing
https://drive.google.com/file/d/1Skqi2pp8MNnH_3t5mwHX0fxJCKmGh1bt/view?usp=sharing
https://drive.google.com/file/d/1l22chgE7JcyukVXv-nty5ApOZMjje7jr/view?usp=sharing
https://drive.google.com/file/d/1lri7Tum2Bnz2BdTcbjIybgDUjHgreX8K/view?usp=sharing
https://drive.google.com/file/d/1tNqo-33RkmJFoMz77Sf7etr17eiVtBw5/view?usp=sharing
https://drive.google.com/file/d/1xX_EyORvh53rr4OzPJFkHs735rOBiLmd/view?usp=sharing
I apologize for the inconvenience but you could add more detailed steps on how to install your ROM I'm asking you please, friend, thanks in advance
Diego057 said:
I apologize for the inconvenience but you could add more detailed steps on how to install your ROM I'm asking you please, friend, thanks in advance
Click to expand...
Click to collapse
I can help you, i tried these steps and everything works fine.
Just add a important information, before you start:
My device is G3116, and this ROM is based in G3112. Not problem here when you use this ROM but, if you want to go back to Stock ROM (flash via Flashtool), the device is no longer recognized as G3116, just G3112. I can't find a solution to this, just modify the ftf file in Flashtool to go back to stock. Please consider this, but this ROM is working fine, no problems so far. You can keep it for long time.
1. Flash TWRP (boot.img and recovery.img) from here: https://forum.xda-developers.com/xa1/development/kernel-xperia-xa1-v4-cross-t3897585
2. Download and Unzip rom from OP and save in your SDCard, in the folder named TWRP.
3. Boot in TWRP and make a backup (if you want, but i'm not sure if will work because, in my case, for now data is encrypted and i'm not able to access data or backup data)
4. Go to Restore and select the folder that you saved in SDCard (select storage, SDCard)
5. Confirm Restore, let it finish and reboot device. It will take some minutes in SONY logo (no bootanimation in this ROM)
6. When finish boot, the setup wizard will appears.
7. Configure everything you want and enjoy.
THANKYOU!!
Thank you for helping me Sir Marek ! your so kind :angel:
MAREK10747 said:
8.1 Oreo alpha is coming soon !!
Click to expand...
Click to collapse
Cheers :highfive:
No wifi
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
synx91 said:
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
Click to expand...
Click to collapse
I've solved this problem just flashing the kernel provided by the dev from this OP.
synx91 said:
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
Click to expand...
Click to collapse
Restore all , not only one file . You can hardbrick device . My system for correct work you must install from first to last update , with all files.
I read the comment, I read the thread, but the thread closed, I don't know where to ask.
I have this issue on flashing the latest https://download.pixelexperience.org/whyred/ via twrp.
whyred verify trustzone
updater process ended with error : 7
From what I read, the user who has this problem come from miui or other rom.
But I use pixel experience myself, I never have this issue in updating before. It just happen when I want to flash the latest build 05/23, currently I am on 05/07 build.
Other people answer is to flash firmware to android 9.0 and flash orange fox recovery, do I really have to do the same if I already on pixel experience roms ( I think it will brick my device if I do that) ?
One more question, Can I update from the normal rom to CAF edition without clean install ?
Hi, you need to flash Pie firmware first, here is the link
UPDATE
Oh yeah I will tell something about this one, many people say that Pie firmware does not work with twrp and they have to use other recovery like orangefox, but for me it works with simple trick. If you still boot up into fastboot after flashing pie firmware then maybe you want to follow my way:
Required:
*Latest Pixel Experience ROM
*Magisk flashable zip (here's v19.2)
×Pie Firmware
*TWRP (here's v3.3.1-0)
MY WAY:
1. Flash Pie firmware using twrp //I guess I dont need to tell about hw to flash twrp?
2. Flash Pixel Experience ROM
3. Flash Magisk
Ahmmm, keep in mind I didn't write "reboot" between each step, and remember just flash magisk even if its "clean install".
And then, anyway it's up to you ?
If you are already on P.E. rom version 20190508, then I suggest don't go for the update,
Since after upgrading to Pie firmware, u can't go back and there is a bug in which Airtel VolTe is not working,
Stay on Oreo firmware, that is fine.
kaleempirzada said:
If you are already on P.E. rom version 20190508, then I suggest don't go for the update,
Since after upgrading to Pie firmware, u can't go back and there is a bug in which Airtel VolTe is not working,
Stay on Oreo firmware, that is fine.
Click to expand...
Click to collapse
Hi, you need VoLTE? Add this bellow to your build.prop then restart device
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Vampire0702 said:
Hi, you need VoLTE? Add this bellow to your build.prop then restart device
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Click to expand...
Click to collapse
I used the above said line in build.prop,
Still I get VolTe only in Jio network and not in the Airtel, there is no Enhanced VolTe call option for Airtel SIM now in my phone.
Sorry, this doesn't work on it.
kaleempirzada said:
I used the above said line in build.prop,
Still I get VolTe only in Jio network and not in the Airtel, there is no Enhanced VolTe call option for Airtel SIM now in my phone.
Sorry, this doesn't work on it.
Click to expand...
Click to collapse
Are you sure? Can you let me see your build.prop?
...
Argh just see, then that's your sim card problem maybe ?
Vampire0702 said:
Are you sure? Can you let me see your build.prop?
...
Argh just see, then that's your sim card problem maybe ?
Click to expand...
Click to collapse
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=PQ3A.190505.002
ro.build.display.id=PQ3A.190505.002
ro.build.version.incremental=406
ro.build.version.sdk=28
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=9
ro.build.version.security_patch=2019-05-05
ro.build.version.real_sec_patch=
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=17
ro.build.date=Wed May 22 21:06:49 -03 2019
ro.build.date.utc=1558570009
ro.build.type=userdebug
ro.build.user=jenkins
ro.build.host=srv2.jhen09.com
ro.build.tags=release-keys
ro.build.flavor=aosp_whyred-userdebug
ro.product.model=Redmi Note 5
ro.product.brand=Xiaomi
ro.product.name=whyred
ro.product.device=whyred
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=Xiaomi
ro.product.locale=en-US
ro.wifi.channels=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=whyred
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=whyred-user 8.1.0 OPM1.171019.011 V9.5.11.0.OEIMIFA release-keys
ro.build.fingerprint=xiaomi/whyred/whyred:8.1.0/OPM1.171019.011/V9.5.11.0.OEIMIFA:user/release-keys
ro.build.characteristics=default
org.pixelexperience.device=whyred
# end build properties
#
# from device/xiaomi/whyred/system.prop
#
#
# system.prop for sdm660
#
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/system/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
#
# Set network mode to (T/L/G/W/1X/EVDO, T/G/W/L) for 7+5 mode device on DSDS mode
#
ro.telephony.default_network=22,20
debug.sf.enable_hwc_vds=1
debug.sf.hw=1
debug.sf.latch_unsignaled=1
debug.gralloc.enable_fb_ubwc=1
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#Disable Skip Validate
sdm.debug.disable_skip_validate=1
#Property to enable display default color mode
vendor.display.enable_default_color_mode=0
# Display Properties as per treble compliance
vendor.gralloc.enable_fb_ubwc=1
vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
persist.mm.enable.prefetch=true
#property to enable narrow search range for video encoding
vidc.enc.target_support_bframe=1
vendor.vidc.enc.disable_bframes=1
vendor.vidc.dec.enable.downscalar=0
# enable PQ feature by default
vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video
vidc.enc.dcvs.extra-buff-count=2
#Netflix custom property
ro.netflix.bsp_rev=Q660-13149-1
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
# system property for maximum number of HFP client connections
bt.max.hfpclient.connections=1
# System property for cabl
ro.qualcomm.cabl=0
ro.vendor.display.cabl=0
ro.vendor.display.ad=1
ro.vendor.display.ad.sdr_calib_data=/data/vendor/display/ad_calib.cfg
ro.vendor.display.sensortype=2
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for wipower support
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.wipower=true
#
#snapdragon value add features
#
#minimum duration for offload playback in secs
audio.offload.min.duration.secs=30
#enable offload audio video playback by default
audio.offload.video=true
#enable music through deep buffer
audio.deep_buffer.media=true
#set AudioFlinger client heap size
ro.af.client_heap_size_kbyte=7168
#system prop for RmNet Data
persist.data.df.dev_name=rmnet_usb0
#
# system property determining camera HAL to be used for a Video call
#
# 1 is camera1
# 2 or anything else is camera2
persist.radio.VT_CAM_INTERFACE=2
# cherrypick form d2s for video call
persist.vendor.qti.telephony.vt_cam_interface=1
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#Enable stm-events
persist.debug.coresight.config=stm-events
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# system prop for NFC DT
ro.nfc.port=I2C
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
#min/max cpu in core control
ro.vendor.qti.core_ctl_min_cpu=2
ro.vendor.qti.core_ctl_max_cpu=4
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=2048
#Bringup properties
persist.vendor.radio.atfwd.start=true
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#Increase cached app limit
ro.vendor.qti.sys.fw.bg_apps_limit=60
#Settings to enable sensors
#Device Orientation sensor
ro.vendor.sensors.dev_ori=true
#Persistent Motion Detector
ro.vendor.sensors.pmd=true
#Stationary Detector
ro.vendor.sensors.sta_detect=true
#Motion Detector
ro.vendor.sensors.mot_detect=true
#enable pickup gesture
ro.vendor.sensors.pug=true
#Expose aux camera for below packages
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
vendor.camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi,com.longcheertel.cit
#back and fornt camera use different face detect parameters
#disable UBWC for camera
persist.vendor.camera.preview.ubwc=0
persist.vendor.camera.stats.test=0
persist.vendor.camera.depth.focus.cb=0
persist.vendor.camera.isp.clock.optmz=0
persist.vendor.camera.linkpreview=0
persist.vendor.camera.isp.turbo=1
#exif info for camera
persist.vendor.camera.exif.make=Xiaomi
persist.vendor.camera.exif.model=Redmi Note 5
persist.vendor.camera.expose.aux=1
#enable video face detect func
persist.vendor.camera.fdvideo=1
#disable awb sync in bokeh mode
persist.vendor.camera.awb.sync=2
#properties for camera front flash lux
persist.vendor.flash.low.lux=390
persist.vendor.flash.light.lux=340
persist.vendor.imx376_ofilm.low.lux=310
persist.vendor.imx376_ofilm.light.lux=280
persist.vendor.imx376_sunny.low.lux=310
persist.vendor.imx376_sunny.light.lux=280
persist.vendor.ov13855_sunny.low.lux=385
persist.vendor.ov13855_sunny.light.lux=370
persist.vendor.s5k3l8_ofilm.low.lux=379
persist.vendor.s5k3l8_ofilm.light.lux=367
persist.vendor.camera.HAL3.enabled=1
persist.vendor.camera.ltm.overlap=13
# HAL1 apps list
vendor.camera.hal1.packagelist=com.whatsapp,com.intsig.camscanner,com.instagram.android
#set maximum supported adapter voltage
persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type
vendor.bluetooth.soc=cherokee
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
# enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
#lct.ydt 20180911 add for voWIFI
#iwaln vowifi corresponding
persist.vendor.data.iwlan.enable=true
#lct.ydt 20180911 add for ignore OOS 5 seconds
persist.vendor.radio.snapshot_enabled=1
persist.vendor.radio.snapshot_timer=5
#HTH-30190 connect wifi, set 3G pre,observe Mobile network type should display UMTS but IWLAN.
persist.vendor.radio.data_con_rprt=1
#lct liuxuan add the dom ignore time
persist.vendor.radio.ignore_dom_time=15
#
# ADDITIONAL_BUILD_PROPERTIES
#
org.pixelexperience.version=Pie
org.pixelexperience.build_date=20190523-0007
org.pixelexperience.build_date_utc=1558570020
org.pixelexperience.build_type=OFFICIAL
org.pixelexperience.fingerprint=PixelExperience/9.0/whyred/20190523-0007
org.pixelexperience.ota.version_code=pie
sys.ota.disable_uncrypt=1
ro.treble.enabled=true
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a73
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-dir=/data/anr
ro.build.expect.trustzone=TZ.BF.4.0.7-00101|TZ.BF.4.0.7-196300
ro.expect.recovery_id=0x3dfc19e041ef2e3859898a9243c2918f8012d8bd000000000000000000000000
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
kaleempirzada said:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=PQ3A.190505.002
ro.build.display.id=PQ3A.190505.002
ro.build.version.incremental=406
ro.build.version.sdk=28
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=9
ro.build.version.security_patch=2019-05-05
ro.build.version.real_sec_patch=
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=17
ro.build.date=Wed May 22 21:06:49 -03 2019
ro.build.date.utc=1558570009
ro.build.type=userdebug
ro.build.user=jenkins
ro.build.host=srv2.jhen09.com
ro.build.tags=release-keys
ro.build.flavor=aosp_whyred-userdebug
ro.product.model=Redmi Note 5
ro.product.brand=Xiaomi
ro.product.name=whyred
ro.product.device=whyred
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=Xiaomi
ro.product.locale=en-US
ro.wifi.channels=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=whyred
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=whyred-user 8.1.0 OPM1.171019.011 V9.5.11.0.OEIMIFA release-keys
ro.build.fingerprint=xiaomi/whyred/whyred:8.1.0/OPM1.171019.011/V9.5.11.0.OEIMIFA:user/release-keys
ro.build.characteristics=default
org.pixelexperience.device=whyred
# end build properties
#
# from device/xiaomi/whyred/system.prop
#
#
# system.prop for sdm660
#
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/system/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
#
# Set network mode to (T/L/G/W/1X/EVDO, T/G/W/L) for 7+5 mode device on DSDS mode
#
ro.telephony.default_network=22,20
debug.sf.enable_hwc_vds=1
debug.sf.hw=1
debug.sf.latch_unsignaled=1
debug.gralloc.enable_fb_ubwc=1
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#Disable Skip Validate
sdm.debug.disable_skip_validate=1
#Property to enable display default color mode
vendor.display.enable_default_color_mode=0
# Display Properties as per treble compliance
vendor.gralloc.enable_fb_ubwc=1
vendor.display.disable_skip_validate=1
#ro.hdmi.enable=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
persist.mm.enable.prefetch=true
#property to enable narrow search range for video encoding
vidc.enc.target_support_bframe=1
vendor.vidc.enc.disable_bframes=1
vendor.vidc.dec.enable.downscalar=0
# enable PQ feature by default
vendor.vidc.enc.disable.pq=false
# Additional buffers shared between Camera and Video
vidc.enc.dcvs.extra-buff-count=2
#Netflix custom property
ro.netflix.bsp_rev=Q660-13149-1
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
# system property for maximum number of HFP client connections
bt.max.hfpclient.connections=1
# System property for cabl
ro.qualcomm.cabl=0
ro.vendor.display.cabl=0
ro.vendor.display.ad=1
ro.vendor.display.ad.sdr_calib_data=/data/vendor/display/ad_calib.cfg
ro.vendor.display.sensortype=2
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for wipower support
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.wipower=true
#
#snapdragon value add features
#
#minimum duration for offload playback in secs
audio.offload.min.duration.secs=30
#enable offload audio video playback by default
audio.offload.video=true
#enable music through deep buffer
audio.deep_buffer.media=true
#set AudioFlinger client heap size
ro.af.client_heap_size_kbyte=7168
#system prop for RmNet Data
persist.data.df.dev_name=rmnet_usb0
#
# system property determining camera HAL to be used for a Video call
#
# 1 is camera1
# 2 or anything else is camera2
persist.radio.VT_CAM_INTERFACE=2
# cherrypick form d2s for video call
persist.vendor.qti.telephony.vt_cam_interface=1
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#Enable stm-events
persist.debug.coresight.config=stm-events
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# system prop for NFC DT
ro.nfc.port=I2C
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
#min/max cpu in core control
ro.vendor.qti.core_ctl_min_cpu=2
ro.vendor.qti.core_ctl_max_cpu=4
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=2048
#Bringup properties
persist.vendor.radio.atfwd.start=true
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#Increase cached app limit
ro.vendor.qti.sys.fw.bg_apps_limit=60
#Settings to enable sensors
#Device Orientation sensor
ro.vendor.sensors.dev_ori=true
#Persistent Motion Detector
ro.vendor.sensors.pmd=true
#Stationary Detector
ro.vendor.sensors.sta_detect=true
#Motion Detector
ro.vendor.sensors.mot_detect=true
#enable pickup gesture
ro.vendor.sensors.pug=true
#Expose aux camera for below packages
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
vendor.camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi,com.longcheertel.cit
#back and fornt camera use different face detect parameters
#disable UBWC for camera
persist.vendor.camera.preview.ubwc=0
persist.vendor.camera.stats.test=0
persist.vendor.camera.depth.focus.cb=0
persist.vendor.camera.isp.clock.optmz=0
persist.vendor.camera.linkpreview=0
persist.vendor.camera.isp.turbo=1
#exif info for camera
persist.vendor.camera.exif.make=Xiaomi
persist.vendor.camera.exif.model=Redmi Note 5
persist.vendor.camera.expose.aux=1
#enable video face detect func
persist.vendor.camera.fdvideo=1
#disable awb sync in bokeh mode
persist.vendor.camera.awb.sync=2
#properties for camera front flash lux
persist.vendor.flash.low.lux=390
persist.vendor.flash.light.lux=340
persist.vendor.imx376_ofilm.low.lux=310
persist.vendor.imx376_ofilm.light.lux=280
persist.vendor.imx376_sunny.low.lux=310
persist.vendor.imx376_sunny.light.lux=280
persist.vendor.ov13855_sunny.low.lux=385
persist.vendor.ov13855_sunny.light.lux=370
persist.vendor.s5k3l8_ofilm.low.lux=379
persist.vendor.s5k3l8_ofilm.light.lux=367
persist.vendor.camera.HAL3.enabled=1
persist.vendor.camera.ltm.overlap=13
# HAL1 apps list
vendor.camera.hal1.packagelist=com.whatsapp,com.intsig.camscanner,com.instagram.android
#set maximum supported adapter voltage
persist.chg.max_volt_mv=9000
#system prop for Bluetooth SOC type
vendor.bluetooth.soc=cherokee
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
# enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
#lct.ydt 20180911 add for voWIFI
#iwaln vowifi corresponding
persist.vendor.data.iwlan.enable=true
#lct.ydt 20180911 add for ignore OOS 5 seconds
persist.vendor.radio.snapshot_enabled=1
persist.vendor.radio.snapshot_timer=5
#HTH-30190 connect wifi, set 3G pre,observe Mobile network type should display UMTS but IWLAN.
persist.vendor.radio.data_con_rprt=1
#lct liuxuan add the dom ignore time
persist.vendor.radio.ignore_dom_time=15
#
# ADDITIONAL_BUILD_PROPERTIES
#
org.pixelexperience.version=Pie
org.pixelexperience.build_date=20190523-0007
org.pixelexperience.build_date_utc=1558570020
org.pixelexperience.build_type=OFFICIAL
org.pixelexperience.fingerprint=PixelExperience/9.0/whyred/20190523-0007
org.pixelexperience.ota.version_code=pie
sys.ota.disable_uncrypt=1
ro.treble.enabled=true
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a73
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-dir=/data/anr
ro.build.expect.trustzone=TZ.BF.4.0.7-00101|TZ.BF.4.0.7-196300
ro.expect.recovery_id=0x3dfc19e041ef2e3859898a9243c2918f8012d8bd000000000000000000000000
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
Click to expand...
Click to collapse
I see you just add 2 lines there ?
No I added all the lines that you mentioned,
kaleempirzada said:
No I added all the lines that you mentioned,
Click to expand...
Click to collapse
Hmm, then I can't help much bro ?
Sent from my Redmi Note 5 Pro using XDA Labs
Vampire0702 said:
Hmm, then I can't help much bro ?
Click to expand...
Click to collapse
But on the Oreo based firmware, it was working fine.
Now after upgrading it is not working,
Neither I can rollback now.
kaleempirzada said:
But on the Oreo based firmware, it was working fine.
Now after upgrading it is not working,
Neither I can rollback now.
Click to expand...
Click to collapse
Hmm, after flashing this build code 0007 with pie fw I also face same issue that VoLTE flag isn't there, and I can't enable flag in *#*#4636#*#*, so I decide to search how to fix that, I just found that way and yeah the flag is switchable now.
Sent from my Redmi Note 5 Pro using XDA Labs
Vampire0702 said:
Hmm, after flashing this code 0007 with pie fw I also face same issue that VoLTE flag isn't there, and I can't enable flag in *#*#4636#*#*, so I decide to search how to fix that, I just found that way and yeah the flag is switchable now.
Click to expand...
Click to collapse
Thanks bro,
Now it worked,
Thanks for your help.
kaleempirzada said:
Thanks bro,
Now it worked,
Thanks for your help.
Click to expand...
Click to collapse
Your welcome ?
Sent from my Redmi Note 5 Pro using XDA Labs
ukasyah_rz said:
Hi, you need to flash Pie firmware first, here is the link
UPDATE
Oh yeah I will tell something about this one, many people say that Pie firmware does not work with twrp and they have to use other recovery like orangefox, but for me it works with simple trick. If you still boot up into fastboot after flashing pie firmware then maybe you want to follow my way:
Required:
*Latest Pixel Experience ROM
*Magisk flashable zip (here's v19.2)
×Pie Firmware
*TWRP (here's v3.3.1-0)
MY WAY:
1. Flash Pie firmware using twrp //I guess I dont need to tell about hw to flash twrp
2. Flash Pixel Experience ROM
3. Flash Magisk
Ahmmm, keep in mind I didn't write "reboot" between each step, and remember just flash magisk even if its "clean install".
And then, anyway it's up to you
Click to expand...
Click to collapse
Sorry for late reply, I don't get any notification about this.
So we can flash firmware via twrp? I thought we need to use miflash or something.
Does flashing firmware same as clean install ? I mean, I just want updating not clean install this. I don't want clean install and lose everything.
So basically the device we buy from the store come with oreo firmware and we need to upgrade it manually to pie to use the latest pixel experience? I really want to know what's the difference in the firmware if we can't downgrade it.
lucius100 said:
Sorry for late reply, I don't get any notification about this.
So we can flash firmware via twrp? I thought we need to use miflash or something.
Does flashing firmware same as clean install ? I mean, I just want updating not clean install this. I don't want clean install and lose everything.
So basically the device we buy from the store come with oreo firmware and we need to upgrade it manually to pie to use the latest pixel experience? I really want to know what's the difference in the firmware if we can't downgrade it.
Click to expand...
Click to collapse
Yes u can flash the firmware then directly flash pixel experience rom, which means both r dirty flash ?
...
What does it mean "the difference in the firmware if we can't downgrade it"?
Sent from my Redmi Note 5 Pro using XDA Labs
ukasyah_rz said:
Yes u can flash the firmware then directly flash pixel experience rom, which means both r dirty flash ?
...
What does it mean "the difference in the firmware if we can't downgrade it"?
Sent from my Redmi Note 5 Pro using XDA Labs
Click to expand...
Click to collapse
The difference between firmware 8.0 and 9.0
We can't downgrade the firmware right?
lucius100 said:
The difference between firmware 8.0 and 9.0
We can't downgrade the firmware right?
Click to expand...
Click to collapse
I think we can, you just need to flash prev fw version and the compatible os.
But, anyway I suggest you to do clean install on every change/move to different android version.
Just want to tell you,
• Backup data with twrp
• Wipe everything except internal storage
• Flash firmware
• Flash ROM
• Restore backed up data
• REINSTALL ROM (ROM that u flash on step 4th to prevent system apps from unable to use like camera that backed up from different os version)
• Done
ukasyah_rz said:
I think we can, you just need to flash prev fw version and the compatible os.
But, anyway I suggest you to do clean install on every change/move to different android version.
Just want to tell you,
• Backup data with twrp
• Wipe everything except internal storage
• Flash firmware
• Flash ROM
• Restore backed up data
• REINSTALL ROM (ROM that u flash on step 4th to prevent system apps from unable to use like camera that backed up from different os version)
• Done
Click to expand...
Click to collapse
Can you give me link pie firmware for my version?
Does havoc os required pie firmware too ? Have u used it?
lucius100 said:
Can you give me link pie firmware for my version?
Does havoc os required pie firmware too ? Have u used it?
Click to expand...
Click to collapse
I provided link beside my smile emo at my first reply.
I dont want to use any other custom rom than PE that the cleanest cusrom.
For Havoc you need to go to their official page and see the required on every released rom if available