Develop Bugs

[Resolved] How to add Multi-Carrier support??

I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.

Adizzzle said:
I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.
Click to expand...
Click to collapse
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.

Adizzzle said:
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.
Click to expand...
Click to collapse
With a Canadian ROM all the user needs to do is as their APN and change their build prop to reference their specific device. An easy way to do this would be to make a flashable zip with the apns.conf file and like the one from my ROM and then make a build prop for the at&t device or any other i747m device that the user can flash after installing the ROM.
apns-conf.xml - 198.08 KB
Sent from my SAMSUNG-SGH-I747 using xda premium

So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.

Adizzzle said:
So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.
Click to expand...
Click to collapse
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.

Adizzzle said:
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.
Click to expand...
Click to collapse
If you can wait I can make one tomorrow for you. I'm not good at it either but I've got a blank one I use for a template
Sent from my SAMSUNG-SGH-I747 using xda premium

I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.

Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha
---------- Post added at 07:52 AM ---------- Previous post was at 07:52 AM ----------
Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha. Just copy and paste is here and wrap code tags around it. Thanks !

Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.I747MVLDMF1
ro.build.version.incremental=I747MVLDMF1
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Mon Jun 3 20:10:12 KST 2013
ro.build.date.utc=1370257812
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0709-09
ro.build.tags=release-keys
ro.product.model=SGH-I747M
ro.product.brand=samsung
ro.product.name=d2vl
ro.product.device=d2can
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2can
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vl-user 4.1.2 JZO54K I747MVLDMF1 release-keys
ro.build.fingerprint=samsung/d2vl/d2can:4.1.2/JZO54K/I747MVLDMF1:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I747MVLDMF1
ro.build.hidden_ver=I747MVLDMF1
ro.build.changelist=1189444
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for HDMI/WFD
persist.sys.camera.connect=0
persist.sys.camera.transform=0
persist.sys.videomode=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

Hello my watch has your code how is that?

Optimus G (LG-F180S/K) KK Official Rollout

Yeah, time to party!
Download dlpkgfile(Not update.zip, For Advance User)

SerenityS said:
Yeah, time to party!
Download dlpkgfile(Not update.zip, For Advance User)
Click to expand...
Click to collapse
Yeap, I will wait for the Korean friends to deal with this, I was already able to download the pdf manual. Nice pictures

SerenityS said:
Yeah, time to party!
Download dlpkgfile(Not update.zip, For Advance User)
Click to expand...
Click to collapse
at last thank you so much how we can try it at e975??

amedian said:
at last thank you so much how we can try it at e975??
Click to expand...
Click to collapse
get a rom dump from f180, port it for e975. ( share it as well ) :good:
or else , wait for a e975 release.

Rishi. said:
get a rom dump from f180, port it for e975. ( share it as well ) :good:
or else , wait for a e975 release.
Click to expand...
Click to collapse
but where is our korean friends they must be share it at the moment.

Flashable zip flashable zip lmao
Sent from my LG-E975 using Tapatalk

and where is our vietnamese friends??

amedian said:
but where is our korean friends they must be share it at the moment.
Click to expand...
Click to collapse
Look at the other thread, we already have the files shared by hoangnova! (need port)

SerenityS said:
Yeah, time to party!
Download dlpkgfile(Not update.zip, For Advance User)
Click to expand...
Click to collapse
man we cant download anything, are there any mirror??
---------- Post added at 07:32 PM ---------- Previous post was at 07:29 PM ----------
rimsilva said:
Look at the other thread, we already have the files shared by hoangnova! (need port)
Click to expand...
Click to collapse
thank you so much

amedian said:
man we cant download anything, are there any mirror??
---------- Post added at 07:32 PM ---------- Previous post was at 07:29 PM ----------
thank you so much
Click to expand...
Click to collapse
Can't wait for a flashable zip . So excited .
Sent from my LG-E975

SerenityS said:
Yeah, time to party!
Download dlpkgfile(Not update.zip, For Advance User)
Click to expand...
Click to collapse
you could give me credit as I noticed it first and mentioned it here: http://forum.xda-developers.com/showpost.php?p=52791076&postcount=157
anyway, congrats guys. A modded version better that the original update is on the way for E975. Just wait a bit and feed your phone with a tasty kitkat.

akahroba said:
you could give me credit as I noticed it first and mentioned it here: http://forum.xda-developers.com/showpost.php?p=52791076&postcount=157
anyway, congrats guys. A modded version better that the original update is on the way for E975. Just wait a bit and feed your phone with a tasty kitkat.
Click to expand...
Click to collapse
Who is going to build it for E975?

roscatel said:
Who is going to build it for E975?
Click to expand...
Click to collapse
cookers are all summoned.

amedian said:
man we cant download anything, are there any mirror??
---------- Post added at 07:32 PM ---------- Previous post was at 07:29 PM ----------
thank you so much
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B-BtlL2Rz4TvUHZ6Q3otWWVJQ1E/edit
password : LGViet.com
this is system dump from F180K I got it from this form http://lgviet.com/forum/threads/system-dump-lg-optimus-g-f180-kitkat-4-4-2.19119/

Update:
http://pkg02.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=FW387895432109876543213/F180S30b_00.kdz
http://pkg02.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=FW487895432109876543213/F180K30b_00.kdz

Is possible flash F180 KDZ over E975??

Hardtron said:
Is possible flash F180 KDZ over E975??
Click to expand...
Click to collapse
You will lose mobile network.

Can it be ported to e970 att version
Sent from my LG-P769 using XDA Premium 4 mobile app

nicklefloss said:
Can it be ported to e970 att version
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'd like to throw in an additional request for an E970 port.

I have extracted the img file if anyone wants (F180K30b) i'll post:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49I.F180K30b
ro.build.display.id=KOT49I.F180K30b
ro.build.version.incremental=F180K30b.1399632318
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri May 9 19:49:11 KST 2014
ro.build.date.utc=1399632551
ro.build.type=user
ro.build.user=jenkins
ro.build.host=LGEACI1R5
ro.build.tags=release-keys
ro.product.model=LG-F180K
ro.product.brand=lge
ro.product.name=geehrc_kt_kr
ro.product.device=geehrc
ro.product.board=gee
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=ko
ro.product.locale.region=KR
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=geehrc
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=geehrc_kt_kr-user 4.4.2 KOT49I.F180K30b F180K30b.1399632318 release-keys
ro.build.fingerprint=lge/geehrc_kt_kr/geehrc:4.4.2/KOT49I.F180K30b/F180K30b.1399632318:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/lge/geehrc/system.prop
#
################################################################
# COMMON system property for this device (geehrc).
# operator-specific property MUST NOT be here.
################################################################
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=1
ro.hdmi.enable=true
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
# Add MOV container feature [[email protected]]
mmp.enable.mov=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#2014-03-11 [email protected] LGP_DATA_DAEMON_NETMGRD_QOS_DISABLE_FOR_VPN [START]
persist.data.netmgrd.qos.enable=false
#2014-03-11 [email protected] LGP_DATA_DAEMON_NETMGRD_QOS_DISABLE_FOR_VPN [END]
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
#mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System prop to disable a2dp sink which is enabled by default
bluetooth.a2dp.sink.enabled=false
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
#LGE_CHANGE_S [email protected] 2012.1.4 CABL off
ro.qualcomm.cabl=2
#LGE_CHANGE_E [email protected] 2012.1.4 CABL off
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
# LGE_CHANGE_S
# If you use Internal-SD with FUSE, comment-out below
# 2012-01-08 [email protected]
#persist.fuse_sdcard=false
# LGE_CHANGE_E
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
# LGE_CHANGE_S [email protected] 2012.4.22 LGE sound profile scenario.
ro.lge.audio_soundprofile=true
# LGE_CHANGE_E [email protected] 2012.4.22 LGE sound profile scenario.
# IME
PRODUCT_PROPERTY_OVERRIDES += \
ime_vibration_pattern=0:20
# System prop for sensor
ro.qc.sdk.sensors.gestures=true
# LGE_CHANGE_S 2012-12-11, [email protected], HDMI block
sys.hdmi.block=unblock
# LGE_CHANGE_E 2012-12-11, [email protected], HDMI block
# Increase texture cache size for FHD models (24MB -> 32MB)
ro.hwui.texture_cache_size=32
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#disable gapless mode by default
audio.gapless.playback.disable=true
# LGE_CHANGE_S [framework][common] the screen auto-brightness adjustment setting
persist.power.useautobrightadj=true
# LGE_CHANGE_E [framework][common] the screen auto-brightness adjustment setting
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.target_operator=KT
ro.build.target_country=KR
persist.service.btui.use_aptx=0
ro.lge.swversion=F180K30b
ro.lge.swversion_short=V30b
ro.lge.swversion_rev=0
ro.lge.factoryversion=LGF180KAT-00-V30b-KT-KR-MAY-09-2014+0
ro.config.ringtone=Lifes_Good.ogg
ro.com.android.dateformat=MM-dd-yyyy
ro.config.notification_sound=Optimus.ogg
ro.config.alarm_alert=Lifes_Good_Alarm.ogg
ro.com.android.dataroaming=false
ro.config.vc_call_vol_default=6
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.ms=android-kt-kr
ro.com.google.clientidbase.am=android-kt-kr
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.yt=android-lge
ro.afwdata.LGfeatureset=KTBASE
ro.support_mpdn=true
ro.config.vc_call_vol_steps=9
ro.radio.ratdisplay=true
ro.com.lge.embedded_battery=true
uicc.mobile_equipment.config=0
persist.radio.apm_sim_not_pwdn=1
persist.data_netmgrd_mtu=1500
ro.camera.sound.forced=1
wifi.lge.offdelay=false
wifi.lge.hanglessid=true
wifi.lge.ftm_test=1
wlan.lge.supportsimaka=yes
wlan.lge.wifidisplay=both
dhcp.dlna.using=false
wifi.lge.kt.cm=true
keyguard.no_require_sim=true
ro.lge.lcd_default_brightness=202
ro.lge.lcd_auto_brightness_mode=false
ro.telephony.default_network=9
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_onehand_keyboard_percent=82
ime_split_keyboard_width_dp=502
ro.config.vibrate_type=1
lge.hw.frontkeyled=true
telephony.lteOnCdmaDevice=0
lge.normalizer.param=version2.0/true/8.0/false/14000/1.0/4300/0.55
ro.lge.bt_gain_control_factor=0.95
wifi.lge.supportp2p5g=full
ro.sf.lcd_density=320
wlan.chip.vendor=qcom
wifi.lge.patch=true
wlan.lge.concurrency=MCC
wlan.chip.version=wcnss
ro.lge.overlay=true
ro.lge.vib_magnitude_index=0,20,40,60,80,100,120,127
persist.sys.strictmode.disable=true
wlan.driver.ath=0
wlan.driver.config=/data/misc/wifi/WCNSS_qcom_cfg.ini
qcom.audio.init=complete
lpa.decode=true
persist.sys.ats_start=false
persist.sys.strictmode.visual=false
lgemm.player.use_android_origin=false
ro.lge.audio_scenario=SOUNDEXCEPTION
ro.lge.audio_soundexception=true
ro.airplane.phoneapp=1
ro.lge.basebandversion=APQ8064/MDM9x15M
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
lge.version.verified=NONE
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.crash.enable=0
persist.sys.ssr.restart_level=3
lge.signed_image=true
persist.radio.data_no_toggle=1
persist.qcril.disable_retry=true
net.tethering.noprovisioning=true
persist.lg.data.fd=-1
ro.carrier=unknown
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
drm.service.enabled=true
bluetooth.chip.vendor=qcom
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
ro.lge.capp_emotional_led=true
ro.lge.capp_almond=true
ro.lge.qslide.max_window=2
ro.lge.capp_wfd=true
ro.com.google.gmsversion=4.4_r2
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=DISABLED
ro.com.google.apphider=off
lge.nfc.vendor=nxp
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1

[ROM][6.0.1] G920P PI3 Edge Multi CSC Multi Languages (En, Fr, Ar, ...)

Based on ROM:
G920PVPS4CPI3
ROM OS Version:
6.0.1 Marshmallow
ROM Kernel: (Choice by aroma)
1. STOCK Linux 3.10.61
2. SkyHigh 3.34 Linux 3.10.101
3. SuperNOVA 7-9-16 Linux 3.10.x
Features:
- Aroma Installer
- Deodexed
- Rooted
- Busybox
- Multi-User
- Knox Removed
- ItsOn Removed
- Sprint App Removed
- Multi CSC (56)
- Multi Languages (En, Fr, Ar, . . . )
- CSC features
- build.prob tweaks
- Edge Features
- GSM/WCDMA/LTE enabled ( and CDMA/EVDO V 1.1)
- FM Radio (works at 50%,The signal is very weak)
- Screen lock does not work and f-print
How to install:
You MUST be on 6.0.1 Firmware to flash these Rom
1) Make a backup of your existing rom and any apps;
2) Place rom zip in internal storage;
3) Boot into recovery and wipe cache, dalvik and data;
4) Flash rom.
Download V 1.1 md5: 01d9f0b2422d98a0ab999c10a5fe17e3
XDA:DevDB Information
RomAB, ROM for the Sprint Samsung Galaxy S6
Contributors
abbn78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 6.0.1
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-11-29
Created 2016-10-25
Last Updated 2016-10-25

How is this different than the other Edge Multi ROM?

This ROM is fully multilingual ! : ( en_GB ; en_US ; fr ; de ; es;af;agq;ak;am;ar;ar_AE;ar_BH;ar_DZ;ar_EG;ar_IQ;ar_JO;ar_LB;ar_MA;ar_SA;ar_SY;ar_TN;ar_YE; . . . ).

Good job brother Rom wonderful. But the screen lock does not work and fprint!?

thank you for the work, i couldn't get data to work, might have been my phone, going to odin back to stock and retry. fyi new firmware CPJ1 just released today

This ROM Saved MY PHONE with the MULTI CSC , get Stucked with a wrong 920p Firmwarez !! Great Jobs
My Original Issue

I've lost my SIM Unlock, am getting noo network, am in Africa using a different network

Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks

Mr.X007 said:
Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks
Click to expand...
Click to collapse
try this CSC Changer or this .

dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
Make restoring your backup efs !

abbn78 said:
try this CSC Changer or this .
Click to expand...
Click to collapse
Thanks! Will try.

you can make full grace Ux rom ???

Fix screen lock
omer.sati said:
Good job brother Rom wonderful. But the screen lock does not work and fprint!?
Click to expand...
Click to collapse
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?

Bealex317 said:
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?
Click to expand...
Click to collapse
Download : Fix Lock screen & Fingerprint
1) Place rom zip in internal storage;
2) Boot into recovery and wipe cache and dalvik;
3) Flash this file.

dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.

gsaalmeida said:
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.
Click to expand...
Click to collapse
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
Original file :
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920PVPS4CPI3
ro.build.version.incremental=G920PVPS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:53:14 KST 2016
ro.build.date.utc=1474332794
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6321
ro.build.tags=release-keys
ro.build.flavor=zerofltespr-user
ro.product.model=SM-G920P
ro.product.brand=samsung
ro.product.name=zerofltespr
ro.product.device=zerofltespr
ro.product.board=universal7420
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zerofltespr
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zerofltespr-user 6.0.1 MMB29K G920PVPS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPS4CPI3:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=G920PVPS4CPI3
ro.build.hidden_ver=G920PVPS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofltespr/system.prop
#
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
#rild.libpath=/system/lib64/libsec-ril.so
rild.libpath=/system/lib64/librilswitch.so
rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
ro.sf.lcd_density=640
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Use CP SE13 Table
persist.radio.use_se_table_only=1
# Default ECCList
ro.ril.ecclist=911,#911,*911
# QMI mux enabled for Fusion 4.0 (For APQ8084 model, MDM9x35)
persist.rmnet.mux=enabled
# Use CDMALTE Phone (For 4G model)
telephony.lteOnCdmaDevice=1
# Support Global Mode (For global mode model)
ro.config.multimode_cdma=1
# Data modules (For evolution RIL model)
ro.use_data_netmgrd=false
persist.data.netmgrd.qos.enable=false
# Use data service state for signal display (Except USC CS model)
ro.config.combined_signal=true
# Default Network Mode (For 4G / Global model)
ro.telephony.default_network=10
# Chameleon Default Operator (SPR with Chameleon)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.dmverity=true
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=911,#911,*911
ril.subscription.types=NV,RUIM
ro.com.android.dataroaming=true
ro.telephony.default_network=10
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
ro.sf.lcd_density=480
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
ro.security.mdpp.ux=Enabled
ro.frp.pst=/dev/block/persistent
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0x0a6245af52fb585c8dd00943e4f8d2e1c3dfdb1e000000000000000000000000
Modified file (to support GSM networks) :
Code:
# begin build properties
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920FXXS4CPI3
ro.build.version.incremental=G920FXXS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:56:53 KST 2016
ro.build.date.utc=1474333013
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHC3716
ro.build.tags=release-keys
ro.build.flavor=zerofltexx-user
ro.product.model=SM-G920F
ro.product.brand=samsung
ro.product.name=zerofltexx
ro.product.device=zerofltexx
ro.product.board=universal7420
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=exynos5
ro.build.product=zeroflte
ro.build.description=zerofltexx-user 6.0.1 MMB29K G920FXXS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS4CPI3:user/release-keys
ro.build.characteristics=nosdcard
ro.build.PDA=G920FXXS4CPI3
ro.build.hidden_ver=G920FXXS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofte/system.prop
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
# rild.libpath=/system/lib64/libsec-ril.so
# rild.libpath=/system/lib64/librilswitch.so
# rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
# rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
# persist.timed.enable=true
[COLOR="Blue"]# General GSM Settings *********************
ro.telephony.default_network=9[/COLOR]
# ro.ril.def.preferred.network=9
[COLOR="Blue"]telephony.lteOnCdmaDevice=0
telephony.lteOnGsmDevice=1
ro.config.multimode_cdma=0[/COLOR]
persist.ril.modem.mode=2
persist.radio.vzw.cdma.mdn=deleted
ro.telephony.gsm-routes-us-smsc=0
persist.radio.ap.phonetype=1
persist.radio.lte.mm.disable=1
persist.ril.features=0x102
ro.HorizontalBUA=false
ro.HorizontalVVM=false
ro.telephony.ril.v3=signalstrength,skipbrokendatac all,writeaidonly
ro.telephony.ril.config=writeaidonly,signalstrength
telephony.rilV7NeedCDMALTEPhone=false
ro.cdma.subscribe_on_ruim_ready=false
persist.ril.mux.noofchannels=10
ro.cdma.nbpcd=0
ro.cdma.subscription=0
ro.com.android.dataroaming=false
ro.radio.networkmode=enable
ro.telephony.get_imsi_from_sim=true
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
ro.telephony.call_ring.delay=0
# For sys info indication
persist.radio.add_power_save=1
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
fw.max_users=3
fw.show_multiuserui=1
fw.show_hidden_users=1
fw.power_user_switcher=1
#Adb
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Enable ADB Debugging By Default & Disable USB Debugging
androidboot.selinux=0
boot.fps=20
shutdown.fps=20
mot.proximity.delay=15
persist.cne.feature=0
persist.mtp.notify=0
persist.usb.notify=0
pm.sleep_mode=1
ro.config.dmverity=false
ro.config.knox=0
ro.config.nocheckin=1
ro.config.tima=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.lge.proximity.delay=15
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.ril.disable.power.collapse=0
ro.ril.enable.amr.wideband=1
ro.ril.fast.dormancy.rule=0
ro.securestorage.knox=false
ro.securestorage.support=false
ro.security.mdpp.ux=Disabled
ro.sys.fw.use_trim_settings=true
security.knox_kap_mode=false
sys.config.samp_spcm_enable=false
sys.config.spcm_db_enable=false
sys.config.spcm_db_launcher=false
sys.config.spcm_preload_enable=false
sys.config.spcm_gcm_kill_enable=false
wlan.wfd.hdcp=disable
##
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=112,911,#911,*911
ril.subscription.types=NV,RUIM
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
# ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
#ro.setupwizard.network_required=false
#ro.setupwizard.mode=OPTIONAL
ro.setupwizard.mode=DISABLED
# ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
# ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0xeea345a12651beb6c5b486f30968e49fa48eb5ef000000000000000000000000
dalvik.vm.checkjni=false
dalvik.vm.dexopt-flags=m=y
dalvik.vm.dexopt-flags=m=y,v=n,o=v
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
lpa.decode=false
lpa.use-stagefright=false
media.stagefright.enable-aac=true
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
media.stagefright.enable-scan=true
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8
net.tcp.buffersize.hspa=6144,87380,524288,6144,163
net.tcp.buffersize.lte=524288,1048576,2097152,5242
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
persist.sys.shutdown.mode=hibernate
persist.sys.ui.hw=1
power.saving.mode=1
power_supply.wakeup=enable
profiler.force_disable_err_rpt=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.config.disable.hw_accel=false
ro.config.hw_fast_dormancy=1
ro.config.hw_menu_unlockscreen=false
ro.config.hw_power_saving=1
ro.product.gpu.driver=1
ro.ril.def.agps.mode=1
ro.ril.sensor.sleep.control=1
ro.secure=0
video.accelerate.hw=1
wifi.supplicant_scan_interval=180
windowsmgr.max_events_per_sec=100
ro.media.enc.jpeg.quality=95

Has anyone gotten this to work on Sprint S6, if so what steps did you take

wright0101 said:
Has anyone gotten this to work on Sprint S6, if so what steps did you take
Click to expand...
Click to collapse
This ROM for Sprint S6 (G920P), with multi csc (56 regions) modified to operate in GSM networks and with different languages support (En, Fr, Ar ...), that are not supported in the original ROM Sprint (G920P SPR).

I am currently sim locked. If I flash this rom do I get sim unlock?

abbn78 said:
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
[/CODE]
Click to expand...
Click to collapse
its possible to enable gsm and umts setting without modding build.prop i enabled it in my next rom version without build.prop
i fixed it through some csc codes
and also your rom doesn't access hiddenmenu through adb its useful to fix NV

A3 2017 - RAW photography

Hello everyone.
I believe that the A3 2017 should have the Camera2 API on the stock Nougat rom.
Can someone please confirm this?
Does the build.prop have:
persist.camera.HAL3.enabled=0
or
persist.camera.HAL3.enabled=1
I would like to know this before actually buying the device.
Thanks!

I took a look and I couldn't find it, here you go anyway.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=NRD90M
ro.build.display.id=NRD90M.A320FXXU2BQG5
ro.build.version.incremental=A320FXXU2BQG5
ro.build.version.sdk=24
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=7.0
ro.build.version.security_patch=2017-07-01
ro.build.version.base_os=
ro.build.date=Wed Jul 19 16:47:50 KST 2017
ro.build.date.utc=1500450470
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHE9614
ro.build.tags=release-keys
ro.build.flavor=a3y17ltexx-user
ro.product.model=SM-A320F
ro.product.brand=samsung
# ro.build.product is obsolete; use ro.product.device
ro.build.product=a3y17lte
ro.product.name=a3y17ltexx
ro.product.device=a3y17lte
ro.product.board=universal7870
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=exynos5
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=a3y17ltexx-user 7.0 NRD90M A320FXXU2BQG5 release-keys
ro.build.fingerprint=samsung/a3y17ltexx/a3y17lte:7.0/NRD90M/A320FXXU2BQG5:user/release-keys
ro.build.characteristics=phone,emulator
# Samsung Specific Properties
ro.build.PDA=A320FXXU2BQG5
ro.build.official.release=true
ro.config.rm_preload_enabled=0
ro.build.changelist=11883096
ro.product_ship=true
ro.chipname=exynos7870
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=24
ro.hwui.layer_cache_size=16
ro.hwui.path_cache_size=4
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=1
ro.hwui.gradient_cache_size=0.5
ro.hwui.drop_shadow_cache_size=2
ro.hwui.r_buffer_cache_size=2
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#
# from device/samsung/a3y17lte/system.prop
#
#
# system.prop for universal7870
#
ro.sf.lcd_density=320
ro.arch=exynos7870
ro.kernel.qemu=0
ro.kernel.qemu.gles=1
persist.demo.hdmirotationlock=false
# read DS/SS property
import /efs/factory.prop
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#Phone early start enable flag
sys.config.phone_start_early=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.dmverity=True
ro.config.rkp=true
ro.config.kap=true
rild.libpath=/system/lib/libsec-ril.so
rild.libpath2=/system/lib/libsec-ril-dsds.so
ro.radio.noril=no
persist.radio.sib16_support=0
ro.telephony.default_network=9
ro.multisim.simslotcount=2
ro.product.first_api_level=23
ro.opengles.version=196610
ro.sf.lcd_density=480
debug.hwc.otf=1
debug.hwc.winupdate=1
debug.hwc.nodirtyregion=1
drm.service.enabled=true
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.securestorage.support=true
ro.build.scafe.version=2017A
security.mdpp.mass=skmm
ro.frp.pst=/dev/block/persistent
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=8.1
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.notification_sound=Grace_Note.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
ro.config.dha_cached_min=3
ro.config.dha_cached_max=5
ro.config.dha_empty_max=24
ro.config.dha_pwhitelist_enable=1
ro.config.dha_lmk_scale=1
ro.config.infinite_bg_enable=false
ro.config.fall_prevent_enable=true
ro.wsmd.enable=true
ro.error.receiver.default=com.samsung.receiver.error
ro.security.vaultkeeper.feature=1
keyguard.no_require_sim=true
ro.carrier=unknown
ro.security.icd.flagmode=multi
security.ASKS.policy_version=000000
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.color.blue=WH
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=7.0_r8
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.iccc_version=1.0
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.build.version.sem=2403
ro.build.version.sep=80100
ro.expect.recovery_id=0x2b639f1480b0d1fd6934259fcf6b2803c0473691000000000000000000000000
Click to expand...
Click to collapse

@AK2H Could you add the persist.camera.HAL3.enabled=1 line and try with Open Camera to see if it does indeed take dng photos ?
Thanks!

In which line should i add it exactly?
And what are the differences that should I see to recognize if it did work or not?

AK2H said:
In which line should i add it exactly?
And what are the differences that should I see to recognize if it did work or not?
Click to expand...
Click to collapse
You can add the line anywhere, the position doesn't matter.
To see if it worked, using Open Camera (or any other app that shoots RAW, just enable RAW capture) you should have a .jpg and a .dng file for every photo you take.

I added the line and saved the chenges and rebooted (also I didn't notice what was the file permissions before I modified it, so I set it to rw--r--r anyway because that's the norm for most cases)
I installed open camera app form play store and enabled the (Use Camera2 API) option.
Took a picture and checked the pics folder and i found the picture in .jpg only

AK2H said:
I added the line and saved the chenges and rebooted (also I didn't notice what was the file permissions before I modified, so is set to rw--r--r anyway because that's the norm for most cases)
I installed open camera app form play store and enabled the (Use Camera2 API) option.
Took a picture and checked the pics folder and i found the picture in .jpg only
Click to expand...
Click to collapse
Did you use a root file browser?
Some file browsers do not see the .DNG files
Thank you for trying it !
Wish you a pleasant weekend!

I used root browser for editing
And Samsung stock file browser for checking
Edite:
I checked using root browser and same results sadly.
You are welcome and Happy weekend to you too

Fortnite not working even after its open for all

Its not working for me even after it's open for all....it just through me out of lobby with error message given below in the screenshot.....
Help me
I wanna play

sameer 100 said:
Its not working for me even after it's open for all....it just through me out of lobby with error message given below in the screenshot.....
Help me
I wanna play
Click to expand...
Click to collapse
+1

If You want to play Fortnite as badly me then I will help you ...
Just follow the instruction
1. Using Build props edit apk on playstore edit the build prop to S7's build
2.now open magisk and hide it from all direction and rename the package in the settings or option
3.Now restart the phone....
Now installation
Download fortnite game but don't open
Now in magisk hide hide launcher and game both
Now disable the usb debugging also
Now open the game here you go the game works well
Note ...
My Config
Citrus CaF 7.1
Magisk 17.1
Gapps micro
Works with
Dot os 8.1
ACIP OS 8.1
(If u use 8.1 u can use s8,s9 and even note 9 build props) but it will have lag issues
Don't use thermal engine like ubercool and other stuff directly play ....becoz it may throttle the processor
If U have any doubt pls don't qoute the whole post below just replay

praveensm899 said:
If You want to play Fortnite as badly me then I will help you ...
Just follow the instruction
1. Using Build props edit apk on playstore edit the build prop to S7's build
If U have any doubt pls don't qoute the whole post below just replay
Click to expand...
Click to collapse
Could you share the S9 Build.prop lines? Like what all should I change?
And what do you mean by rename the package?

Simply4Nothing said:
Could you share the S9 Build.prop lines? Like what all should I change?
And what do you mean by rename the package?
Click to expand...
Click to collapse
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=NMF26F
ro.build.display.id=z2_plus-userdebug 7.1.1 NMF26F 56b641b8c7 test-keys
ro.build.version.incremental=56b641b8c7
ro.build.version.sdk=25
ro.build.version.preview_sdk=0
ro.build.version.codename=OFFICIAL
ro.build.version.all_codenames=REL
ro.build.version.release=7.1.1
ro.build.version.security_patch=2016-12-05
ro.build.version.base_os=
ro.build.date=sab 8 apr 2017, 23.11.24, CEST
ro.build.date.utc=1491685884
ro.build.type=userdebug
ro.build.user=dd3
ro.build.host=dd3lubuntu
ro.build.tags=test-keys
ro.build.flavor=hero2ltexx-user
ro.product.brand=samsung
ro.product.name=hero2ltexx
ro.product.board=msm8996
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=msm8996
# ro.build.product is obsolete; use ro.product.device
ro.build.product=z2_plus
ro.product.model=SM-G935F
ro.product.device=hero2lte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=z2_plus-userdebug 7.1.1 NMF26F 56b641b8c7 test-keys
ro.build.fingerprint=ZUK/z2_plus/z2_plus:7.1.1/NMF26F/56b641b8c7:userdebug/test-keys
ro.build.characteristics=nosdcard
ro.citrus.device=z2_plus
# end build properties
#
# from device/zuk/z2_plus/system.prop
#
# Audio
audio_hal.period_size=192
audio.deep_buffer.media=true
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=true
audio.offload.multiaac.enable=true
audio.offload.multiple.enabled=true
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.track.enable=false
audio.offload.video=true
audio.safx.pbe.enabled=true
audio.parser.ip.buffer.size=262144
audio.dolby.ds2.enabled=false
audio.dolby.ds2.hardbypass=false
use.voice.path.for.pcm.voip=true
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
tunnel.audio.encode=false
# Bluetooth
bt.max.hfpclient.connections=1
qcom.bluetooth.soc=rome
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.wipower=true
# Camera
persist.camera.imglib.fddsp=1
persist.camera.llc=1
persist.camera.llnoise=1
persist.camera.stats.test=0
camera.disable_zsl_mode=1
# CNE
persist.cne.feature=1
# Data modules
persist.data.mode=concurrent
persist.data.netmgrd.qos.enable=true
ro.use_data_netmgrd=true
persist.data.iwlan.enable=true
<<<<<<< HEAD
# Device was launched with M
ro.product.first_api_level=23
=======
>>>>>>> 8ed04f9... Move away from system_prop.mk in favor of system.prop
# Display (Qualcomm AD)
ro.qualcomm.cabl=2
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/calib.cfg
ro.qcom.ad.sensortype=2
# Fingerprint
persist.qfp=false
# Flip panel
persist.panel.inversemounted=1
ro.panel.mountflip=3
# Google
ro.opa.eligible_device=true
# Graphics
debug.egl.hw=1
debug.gralloc.enable_fb_ubwc=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
persist.hwc.enable_vds=1
ro.opengles.version=196610
ro.sf.lcd_density=480
sdm.debug.disable_rotator_split=1
sdm.perf_hint_window=50
# GPS
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
# Hdmi
persist.speaker.prot.enable=true
qcom.hw.aac.encoder=true
# Media
flac.sw.decoder.24bit.support=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
use.qti.sw.alac.decoder=true
use.qti.sw.ape.decoder=true
# NITZ
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
# Perf
ro.am.reschedule_service=true
ro.min_freq_0=307200
ro.min_freq_4=307200
ro.sys.fw.bg_apps_limit=60
ro.vendor.extension_library=libqti-perfd-client.so
# Radio
DEVICE_PROVISIONED=1
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.telephony.default_network=22,22
ro.telephony.default_cdma_sub=0
ro.telephony.call_ring.multiple=false
persist.data.qmi.adb_logmask=0
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.net.doxlat=true
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.custom_ecc=1
persist.radio.flexmap_type=dds
persist.radio.force_on_dc=true
persist.radio.multisim.config=dsds
persist.radio.primarycard=true
persist.radio.rat_on=combine
persist.radio.sib16_support=1
persist.radio.sw_mbn_volte=1
persist.radio.sw_mbn_openmkt=1
# RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
# Storage
persist.fuse_sdcard=true
# TimeService
persist.timed.enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Titania.ogg
ro.config.notification_sound=Tethys.ogg
ro.carrier=unknown
ro.config.alarm_alert=Oxygen.ogg
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=288m
dalvik.vm.heapsize=768m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
persist.debug.wfd.enable=1
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-google
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
ro.opa.eligible_device=true
persist.sys.dun.override=0
media.sf.omx-plugin=libffmpeg_omx.so
media.sf.extractor-plugin=libffmpeg_extractor.so
persist.sys.recovery_update=false
BUILD_DISPLAY_ID=NMF26F
citrus.ota.version=CitrusCAF-z2_plus-3.1-TANGERINE-OFFICIAL-20170408
ro.citrus.version=3.1-TANGERINE
ro.modversion=CitrusCAF-z2_plus-3.1-TANGERINE-OFFICIAL-20170408
ro.citrus.buildtype=OFFICIAL
ro.citrus.flavour=TANGERINE
ro.bionic.ld.warning=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.expect.recovery_id=0x20fa159947c3855ed8a0466232abd82246d2a8e7000000000000000000000000
I'dont use S9 props becoz our zuk heats up faster
But u can use this build prop
Copy create new file and save as build.prop
In twrp mount system
In recovery twrp using file manager
Paste the file in system
And click on the pasted file and run CHMod755

Lags and closes after matchmaking
I didn't get any error message. After matchmaking the phone lags and fortnite closes. Any fix ?
I'm on PF nougat.

anirban.ds said:
I didn't get any error message. After matchmaking the phone lags and fortnite closes. Any fix ?
I'm on PF nougat.
Click to expand...
Click to collapse
+1