Related
Introduction
This is a test version of OmniROM with SGX DDK 1.9 graphics drivers, as well as many OMAP-related kernel updates. No, this isn't 3.4, but a LOT of TI updates were packed into the kernel. Currently, this is only for maguro, but anyone can build it for toro/toroplus with the sources.
Click to expand...
Click to collapse
Features
The ROM and the kernel has a stock feeling - no mods were added.
Most notable new features:
- SGX DDK [email protected]
- GPU governor
- Enabled 384 MHz GPU frequency (as a part of the OMAP updates)
- Tons of background changes for the kernel
Click to expand...
Click to collapse
Important notes
Camera and OMX is not working yet! This turned out to be a harder task for me to fix than implementing the new GPU drivers...
Other bugs are not known yet, but there may be some! Bug reports are welcome.
Thanks to everyone who helped me, especially Hashcode, as I used his repos as an example on how to set up things properly.
Click to expand...
Click to collapse
FAQ
How can I install this?
Just flash the ROM zip (and optionally GAPPS), and you're done.
Can I install this on top of Omni roms?
Yes, you should be able to do so without data loss.
Can I revert to non-1.9 Omni after this without data loss?
Yes.
Is this faster than the current ROMs/kernels?
As this is a stock-like ROM and kernel, not necessarily - there are no optimizations, etc added.
However, if one adds the optimizations used on current custom roms and kernels, this should be faster than them.
Can I install another kernel?
No, the new drivers require the ROM and the kernel side to match each other. Only this combination will work.
When will you fix camera?
I'm trying, but I don't have much success...
Can I help?
Sure, I appreciate any help, as I'm running out of ideas on how to fix camera and OMX.
Can I build this stuff myself?
Of course - everything needed is on my github. You'll need the following repos added to your Omni sources:
omni_android_device_samsung_tuna
omap (newpvr2 branch)
proprietary_vendor_samsung_tuna
Click to expand...
Click to collapse
XDA:DevDB Information
OmniROM DDK 1.9 Test, ROM for the Samsung Galaxy Nexus
Contributors
Ziyan
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: OmniROM
Version Information
Status: Testing
Created 2014-07-13
Last Updated 2014-07-13
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
aliesz said:
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Click on the downloads button above the thread title
If you're on tapatalk you'll need to go to Web view..
To see the download
Sent from the "DOG" pound
Yes I found it just seconds ago
Sent from my Galaxy Nexus using Tapatalk
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
cujo6801 said:
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
Click to expand...
Click to collapse
Thanks for the suggestion, added it to the introduction text.
Amazing! I will try out tommorow
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Nice work! Seems a lot more responsive although it may be placebo effect.
Thanks for posting this, I'm going to try building for toroplus, since we seem to get left out of the excitement so often. My internet connection is slow and so is my computer, so you will probably have everything fixed before I get a chance to even look for bugs.
Great work! I hope you manage to get camera working soon.
Amazing work bro, wishing u best of luck !!
I'm on F2Fs otherwise would have tested this asap...
Awesome work!
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
matoushybl said:
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Click to expand...
Click to collapse
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
apollo07 said:
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
Click to expand...
Click to collapse
Not yet, I'm focusing on camera for now
Ziyan said:
The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
Click to expand...
Click to collapse
How about using SurfaceFlinger's Sync framwork now?
https://github.com/omnirom/android_...mmit/d677ae87b2466b03a6ca1cda6ee532c6ba407f8c
@Ziyan https://gerrit.omnirom.org/#/c/8141/
https://gerrit.omnirom.org/#/c/8156/ cherypick those and recompile
Ziyan said:
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
Not yet, I'm focusing on camera for now
Click to expand...
Click to collapse
Ziyan, thanks for the awesome work
It 's possible to have some screenshots?
Clean AOSP for Optimus G
Pure AOSP
This rom bases on the most current Android (5.1.1) Open Source Project repo. That is what makes it special comparing to other custom LP roms like AOKP or CyanogenMod. This rom is fully AOSP, without stuff from AOKP or CM. Don’t even ask if I could add theme engine, custom lockscreen or other crap. For mods you can use Xposed framework.
Pro AOSP
Rom with additional features maintaining great speed and stability.
Addons:
RRO Layers
SuperSU included
Power menu settings
Recent apps settings
Notification drawer settings
Layers Manager
Button backlight settings
OTA updates
a lot of optimizations under the hood
Screenshots:
PRO version
Download:
Pure AOSP
click
Pro AOSP
click
Gapps
Gapps "for nexus" version recomended
How to install:
Code:
- flash this recovery [URL="http://forum.xda-developers.com/optimus-g-intl/orig-development/teamwin-recovery-project-v2-8-7-0-t3160105"]TWRP[/URL]
- copy rom zip to your phone storage
- flash rom via recovery
- (only pure version) if you want root flash this [URL="https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1"]SuperSu[/URL]
- do wipe (data, cache, dalvik-cache)
- reboot
Credits:
Kevinjoa
Chainfire
Alberto97
XDA:DevDB Information
AOSP for Optimus G, ROM for the LG Optimus G
Contributors
DevSwift1
Source Code: https://github.com/lollipop-og/kernel_msm
https://github.com/ProjectG/manifest
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-07-18
Last Updated 2015-07-18
Installing. Let's see hows it. Thanks!
crime_of_heart said:
Installing. Let's see hows it. Thanks!
Click to expand...
Click to collapse
and how is it?)) All working fine ? Batery frendly ?
I'll try this one.. Hoping for no abrupt sensors and no RIL crashes. Downloading now
Everything seems to work fine. Remember to flash this recovery when flashing. Otherwise it could not boot.
sensor doesnt work
flash AXIIOn rom first? then flash this rom??
christboanerges said:
sensor doesnt work
flash AXIIOn rom first? then flash this rom??
Click to expand...
Click to collapse
for me sensors work, for @pcfighter too.
In first post you have "How to install"
DevSwift1 said:
for me sensors work, for @pcfighter too.
In first post you have "How to install"
Click to expand...
Click to collapse
Thanks for this ROM. I think it's the same story about all geehrc ROMs. Flash cm11 gee, boot up, get back to recovery, then flash any geehrc lollipop to have working sensors.
DevSwift1 said:
for me sensors work, for @pcfighter too.
In first post you have "How to install"
Click to expand...
Click to collapse
akahroba said:
Thanks for this ROM. I think it's the same story about all geehrc ROMs. Flash cm11 gee, boot up, get back to recovery, then flash any geehrc lollipop to have working sensors.
Click to expand...
Click to collapse
yes , after flash cm 11 all sensor work :good:
good rom , it very clean :good:
Great work with this, AOSP isn't easy to build.
Everything is working (sensors included), didn't catch a single bug, well done.
It is not pure aosp: https://github.com/f-aosp
Gesendet von meinem Optimus G mit Tapatalk
Kevinjoa said:
It is not pure aosp: https://github.com/f-aosp
Gesendet von meinem Optimus G mit Tapatalk
Click to expand...
Click to collapse
from f-AOSP I used only platform_build repo for inline kernel build, fastest way to get it
Then show me your device tree.
OK, I checked rom, seems like (fully) aosp but where is the flashlight toggle ?
So, Do I need to flash cm11 gee first or not? different reports :/
Edit: tested it myself. flashing a kitkat gee ROM is a must to have working sensors just like all other geehrc ROMs. first impression: super smooth!:good:
Only works flashing it using twrp? Anybody tried philz?
Enviado desde mi Optimus G mediante Tapatalk
akahroba said:
So, Do I need to flash cm11 gee first or not? different reports :/
Edit: tested it myself. flashing a kitkat gee ROM is a must to have working sensors just like all other geehrc ROMs. first impression: super smooth!:good:
Click to expand...
Click to collapse
yes super smooth :good:
2 days use this rom i not have any problem, when bored i back to sling rom kahroba edition :fingers-crossed:
Hey, look what I've found: https://basketbuild.com/devs/TKruzze/5.1.x GApps Packages
former PA gapps, now named as tk gapps. Best of the bests. I just combined this ROM and the stock gapps package and now I'm a fully nexus device owner Thank you ^_^
akahroba said:
Hey, look what I've found: https://basketbuild.com/devs/TKruzze/5.1.x GApps Packages
former PA gapps, now named as tk gapps. Best of the bests. I just combined this ROM and the stock gapps package and now I'm a fully nexus device owner Thank you ^_^
Click to expand...
Click to collapse
gapps from first post are also stock from nexus devices, more than 400mb
How to turn off button backlight?or disable
I use gravity box ,but button backlight stil turn on
christboanerges said:
How to turn off button backlight?or disable
I use gravity box ,but button backlight stil turn on
Click to expand...
Click to collapse
Using a root explorer go to sys/class/leds/buttons-backlight and open brightness with a text editor and change 10 to 0 and save. @DevSwift1 can you please make brightness automatic? Or controllable by apps? Apps like capacitive buttons work on other roms but not this.
Sent from my Optimus G using Tapatalk
Hi Everyone i make new Build of Cyanogen Mod 12.1 who fixes the extremly battery drain (i don't have much time to test it)
This is Modded Build (The build orginally it's made by @The Marionette
I make Two Builds
1. CM 12.1 with new Kernel,editted on @The Marionette build from 04/01/2016
2.CM 12.1 with new kernel.editted on @The Marionette build from 28/02/2016
Guide:
-Download ROM
-Wipe everything
-Flash Rom, And Gapps
-Reboot and wait to Boot (about 5-10 mins)
The Kernel is created by my Friend
Downloads
CM 12.1 with new Kernel,editted on @The Marionette build from 04/01/2016
Here's Link:https://www.androidfilehost.com/?fid=24438995911976724
CM 12.1 with new kernel.editted on @The Marionette build from 28/02/2016
Here's Link https://www.androidfilehost.com/?fid=244389
New Boot.img
Here's Link:https://www.androidfilehost.com/?fid=24438995911976839
The new Kernel fixes the Extremly Battery drain
Credits:Big Thanks for @The Marionette Builds
XDA:DevDB Information
[ROM][6045][Modded] CyanogenMod 12.1, ROM for the Alcatel Onetouch Idol 3
Contributors
aleksandar.d123, the marionette, Unjustified Dev
Source Code: https://github.com/TeamRegular/android_kernel_alcatel_msm8916-stock
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-11
Created 2016-03-11
Last Updated 2016-03-22
Thanks, but what is "Boot.img" ?
Your modded kernel ? So, can you list all the roms your kernel is compatible with ?
You shall list the things you have moded in this rom. Thanks for contributing to this community
Sent from my 6045X using Tapatalk
It's the same builds as any other CM12.1 ROMs except with a modified kernel that fixes battery drain.
Sent from my 6045O using Tapatalk
Nikola Jovanovic said:
You shall list the things you have moded in this rom. Thanks for contributing to this community
Sent from my 6045X using Tapatalk
Click to expand...
Click to collapse
-New kernel
-Fixed Batttery drain
luminouche said:
Thanks, but what is "Boot.img" ?
Your modded kernel ? So, can you list all the roms your kernel is compatible with ?
Click to expand...
Click to collapse
yes,the boot.img is modded kernel
The Kernel works with all Custom Roms
Hemidrosis said:
It's the same builds as any other CM12.1 ROMs except with a modified kernel that fixes battery drain.
Sent from my 6045O using Tapatalk
Click to expand...
Click to collapse
Yes
What changed in ROM? I mean that kernel fix battery drain, but what you changed in ROM?
aleksandar.d123 said:
Yes
Click to expand...
Click to collapse
Can you flash the IMG as a kernel in twrp or does it have to be through adb? I'm running this right now and all is smooth. Haven't tested battery yet but with kernel auditor app tweaks I've got the temp running low. Very happy with this. Thanks to marionette and thanks to you if the battery is improved.
carnivalrejectq said:
Can you flash the IMG as a kernel in twrp or does it have to be through adb? I'm running this right now and all is smooth. Haven't tested battery yet but with kernel auditor app tweaks I've got the temp running low. Very happy with this. Thanks to marionette and thanks to you if the battery is improved.
Click to expand...
Click to collapse
The boot is include in the Build
aleksandar.d123 said:
The boot is include in the Build
Click to expand...
Click to collapse
Yes I know, I was meaning for to use the kernel independently.
Far as I can see , using rom since last night my battery last longer but it's early ...anyway good job
savinjo22 said:
Far as I can see , using rom since last night my battery last longer but it's early ...anyway good job
Click to expand...
Click to collapse
Thanks
Link of 28/02 is broken or not uploaded yet ?
luminouche said:
Link of 28/02 is broken or not uploaded yet ?
Click to expand...
Click to collapse
Link is wrong
There is correct: https://www.androidfilehost.com/?fid=24438995911976803
MichaelGK said:
Link is wrong
There is correct: https://www.androidfilehost.com/?fid=24438995911976803
Click to expand...
Click to collapse
i will change,thanks
luminouche said:
Link of 28/02 is broken or not uploaded yet ?
Click to expand...
Click to collapse
[Bhttps://www.androidfilehost.com/?fid=24438995911976803[/B]
Sorry, but can't boot CM 12-20161103-UNOFFICIAL-idol3.zip
I have blue Cyano logo, then optimizing apps (Android is starting, Optimizing xxx of 87, installed pico GApps), then blue Cyano logo again, optimizing apps again... kind a bootloop.
Updating contacts... Finishing boot, then dimmed brightness blue Cyano logo, again & again
6045Y model.
Tested the 2 versions you uploaded = bootloop.
All was going well for me, until I did a reboot and my APN and sim no longer worked. Nothing would help it. 3/11 build.
carnivalrejectq said:
All was going well for me, until I did a reboot and my APN and sim no longer worked. Nothing would help it. 3/11 build.
Click to expand...
Click to collapse
This orginally maded by the marionette i changed the kernel ,try to reflash
MoKee Open Source 51.1 (Unofficial)
STATUS: Abandoned.
Features:
Odexed, quicker first boot
March security update
Archived Downloads
Sources
Chance to get a new experience. xD
Very good , exellent rom my friend
Great work! It's very pure like AOSP? Or have themes too?
lohhans said:
Great work! It's very pure like AOSP? Or have themes too?
Click to expand...
Click to collapse
it is a CM-based rom so it has CM themes app.
tank0412 said:
it is a CM-based rom so it has CM themes app.
Click to expand...
Click to collapse
OK, thks, sorry for the ignorance haha...
Another custom rom...great job dev.
Sent from my ASUS_T00F using Tapatalk
For experiment i ported my CM12.1 kernel to this Mookee rom:
https://drive.google.com/file/d/0B-Fin8UxrD6PTjRHbVBDTUY2dWM/view
This kernel was compiled from X Anwar source so it has a ton governors + i/o stuff.
Note: MTP is working.
Maybe it will be needed for someone.
Note2: Kernel from other roms will be incompatible with this Mokee rom without ramdisk bring up for Mokee.
NOTICE
Update your Kernel
The kernel I've released with the first build was a SELinux Enforcing kernel (which I don't give support anymore).
I've forgot to update command-line, sorry.
A new SELinux Permissive kernel has been just released, and the SELinux Enforcing kernel was deleted.
Now, download bootMK-20160324_2-SELinuxPermissive.img and flash it:
Code:
fastboot flash boot bootMK-20160324_2-SELinuxPermissive.img
fastboot erase cache
fastboot reboot
witch wakelocks i need block to get better battery perfomance?
karabeen said:
witch wakelocks i need block to get better battery perfomance?
Click to expand...
Click to collapse
Nothing.
If you disable system wakelocks, device will not turn on due call or something like this. (IMHO)
can you try carbon os
shobint7 said:
can you try carbon os
Click to expand...
Click to collapse
Maybe one day, I just can't maintain many ROM's for Zenfone. I'm sorry
Plus, that soon I'll be moving to Motorola
Very good!
dgadelha said:
Maybe one day, I just can't maintain many ROM's for Zenfone. I'm sorry
Plus, that soon I'll be moving to Motorola
Click to expand...
Click to collapse
Good choice there!
tank0412 said:
For experiment i ported my CM12.1 kernel to this Mookee rom:
https://drive.google.com/file/d/0B-Fin8UxrD6PTjRHbVBDTUY2dWM/view
This kernel was compiled from X Anwar source so it has a ton governors + i/o stuff.
Note: MTP is working.
Maybe it will be needed for someone.
Note2: Kernel from other roms will be incompatible with this Mokee rom without ramdisk bring up for Mokee.
Click to expand...
Click to collapse
Will it work on dgadelha cm 12 too ? Thanks
Sent from my ASUS_T00F using Tapatalk
Ale uto said:
Will it work on dgadelha cm 12 too ? Thanks
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
No.
Ale uto said:
Will it work on dgadelha cm 12 too ? Thanks
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
This kernel version above will work on Mokee only.
But this version below is working on my CM-based roms:
https://drive.google.com/open?id=0B-Fin8UxrD6PZWt6UWIxQmdMT3M
On dgadelhas CM12.1 builds it can boot but it is not guaranted. (It can have troubles with SElinux)
tank0412 said:
This kernel version above will work on Mokee only.
But this version below is working on my CM-based roms:
https://drive.google.com/open?id=0B-Fin8UxrD6PZWt6UWIxQmdMT3M
On dgadelhas CM12.1 builds it can boot but it is not guaranted. (It can have troubles with SElinux)
Click to expand...
Click to collapse
Being Permissive I guess it will work right
how i can flash .img without computer
plz give me instruction
SmokeR21.5(new updates always will be here)
This kernel is based on the latest source code for Linux4Tegra for Tegra K1 official Nvidia website
Also this kernel is fully compatible with our performance profiles application profiles app
XDA:DevDB Information
SmokeR21.5, Kernel for the Xiaomi Mi Pad
Contributors
Artemka2008, DbIm4pda
Kernel Special Features:
Version Information
Status: Testing
Stable Release Date: 2017-06-28
Current Beta Version: beta3
Beta Release Date: 2017-06-28
Created 2017-06-28
Last Updated 2017-06-27
reserved
At first boot after flashing the tablet shows some severe hiccups but after a while its fluid smooth great work dev thanks great kernel
jobin john said:
At first boot after flashing the tablet shows some severe hiccups but after a while its fluid smooth great work dev thanks great kernel
Click to expand...
Click to collapse
How's the performance with LOS13 (I assume you are using that ROM) ?
How are the games performance ?
Is HL2, Mordern Combat, etc. working ?
Can i using this for MIUI eu?
hell1134 said:
How's the performance with LOS13 (I assume you are using that ROM) ?
How are the games performance ?
Is HL2, Mordern Combat, etc. working ?
Click to expand...
Click to collapse
No I'm on aex extended so here performance wise no issue can mc runs great no issues but no idea about half life 2 I don't own that game
OMG! Is this kernal really have this features?
Best performance I've seen yet (I'm using crDroid).
Butter smooth, very fluid, no artifacts - keep up the awesome work guys
buzzmarz said:
Can i using this for MIUI eu?
Click to expand...
Click to collapse
Nope. I will add this feature later
Is working flawlessly with AEX, very very good kernel, thanks!!
Perfect kernel with AOSP Extended (Old blobs for camera) ! Much smoother than anything before
Wifi don't work for new blobs, after install the zip and reboot on LOS 14.1 is necessary Connect to charge it and then recognize the power button.
Enviado desde mi MI PAD mediante Tapatalk
Hi,
And firstly, thanks to Artemka2008...
I just installed it to test and compare with F1xy. (LineageOS 14.1). Seems to run smoothly, without issue, except Bluetooth, bluetooth is broken, and doesn't even turn on .
Ashuparla said:
Is working flawlessly with AEX, very very good kernel, thanks!!
Click to expand...
Click to collapse
Hey man can ypu guide me how can I flash this kernel?
Do have to be rooted to be able to flash this kernel!?
Just give me a little guidance on the things I should do before and after flashing the kernel.
Thanks in advance.
By the way I am on AEX ROM
---------- Post added at 07:00 AM ---------- Previous post was at 06:15 AM ----------
vickdu31 said:
Perfect kernel with AOSP Extended (Old blobs for the camera)! Much smoother than anything before
Click to expand...
Click to collapse
Things to follow before and after flashing the Kernel?
Do I need to be rooted before or after flash?
skroychowdhury said:
Hey man can ypu guide me how can I flash this kernel?
Do have to be rooted to be able to flash this kernel!?
Just give me a little guidance on the things I should do before and after flashing the kernel.
Thanks in advance.
By the way I am on AEX ROM
Click to expand...
Click to collapse
I were in aex rooted with supersu before. I've downloaded the 27/06 old blobs aex new release and the OP new kernel. Once you have done that, go to twrp and make a backup (just in case), then flash aex, flash gapps, flash this kernel, flash supersu and reboot without wiping anything.
Let it boot (it will take five mins more or less), you are done
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
simsphil said:
Hi,
Ans firstly, thanks to Artemka2008...
I juste installed it to test and compare with F1xy. (LineageOS 14.1). Seems to run smoothly, without issue, except Bluetooth, bluetooth is broken, and doesn't even turn on .
Click to expand...
Click to collapse
BT works for me without errors in AEX old blobs
need more help!!!
Ashuparla said:
I were in aex rooted with supersu before. I've downloaded the 27/06 old blobs aex new release and the OP new kernel. Once you have done that, go to twrp and make a backup (just in case), then flash aex, flash gapps, flash this kernel, flash supersu and reboot without wiping anything.
Let it boot (it will take five mins more or less), you are done
Click to expand...
Click to collapse
So if I am doing a clean flash, I will need The latest ROM zip, Latest GApps, The Kernel Zip and SuperSu. Right!?
And is the performace is better with the new kernel than just the stock rom on old blobs? If possible share antutu scores.
skroychowdhury said:
Things to follow before and after flashing the Kernel?
Do I need to be rooted before or after flash?
Click to expand...
Click to collapse
Root is needed if you want to use the app but my root is broken somehow, I have done dirty flash since very long time with AOSP Extended (Just wiped cache and dalvik). So update your rom and flash kernel.
If you are on miui you need to change the partitions and then factory reset + flash rom + flash gapps + flash kernel
skroychowdhury said:
And is the performace is better with the new kernel than just the stock rom on old blobs? If possible share antutu scores.
Click to expand...
Click to collapse
Forget AnTuTu. Here's my cold boot 3DMark benchmark scores using 'Game' performance profile.
Palm Trees said:
Forget AnTuTu. Here's my cold boot 3DMark benchmark scores using 'Game' performance profile.
Click to expand...
Click to collapse
Good !
man ... I wish I could have used this kernel for MIUI 4.4, but, .... oh well!!