Related
Hello.
I've tried to update from leak 4.1.2 to final version but bricked the phone. Everything went well until restart. Progress bar in recovery went to the end, odin told that it's finished and it restarts the headset (green square) but the phone did not started.
Battery is OK, the phone does not start in normal mode nor in recovery ( +vol- +home +power) however, when i try to run recovery and the USB cable is plugged, my PC says that new device is found ("u8500 usb rom")
Odin dont see the phone.
Is there something that may help?
EDIT: ok, I found that in most cases only sending the phone to retailer will help. Please, anyone know if after they reflash the board they will know that I flashed the phone in past? (flash counter was "2" )
Can u enter the download mode and try a reflash? I got the same Problem with my first ace 2. Under jellybean the touchscreen did not work anymore and gingerbread wasnt able to Boot (downgrading and upgrading With pit file worked a lot of times before). Then i tried „heimdall" (an alternative To Odin) and.... Totally bricked my phone... No download mode Or something and the phone wasnt able to turn on. But Samsung gave me a New phone and because the download mode didnt work they couldnt check the flash counter....
forgottnxd said:
Can u enter the download mode and try a reflash? I got the same Problem with my first ace 2. Under jellybean the touchscreen did not work anymore and gingerbread wasnt able to Boot (downgrading and upgrading With pit file worked a lot of times before). Then i tried „heimdall" (an alternative To Odin) and.... Totally bricked my phone... No download mode Or something and the phone wasnt able to turn on. But Samsung gave me a New phone and because the download mode didnt work they couldnt check the flash counter....
Click to expand...
Click to collapse
Found several methods to unbrick. Quite cheap (first 2 $ jig second 20$ jtag). My man at Samsung says that it is possible to read flash counter even at hard-brick state so Sammy service is a last resort
Will update if it works
They can check flash counter when phone is hard brick? Put cable from wall into ace 2 usb port - you burn it. Then they cant check.
piecho said:
Hello.
I've tried to update from leak 4.1.2 to final version but bricked the phone. Everything went well until restart. Progress bar in recovery went to the end, odin told that it's finished and it restarts the headset (green square) but the phone did not started.
Battery is OK, the phone does not start in normal mode nor in recovery ( +vol- +home +power) however, when i try to run recovery and the USB cable is plugged, my PC says that new device is found ("u8500 usb rom")
Odin dont see the phone.
Is there something that may help?
EDIT: ok, I found that in most cases only sending the phone to retailer will help. Please, anyone know if after they reflash the board they will know that I flashed the phone in past? (flash counter was "2" )
Click to expand...
Click to collapse
Hi, I had also hard bricked my phone some weeks ago. You can read it here.
http://forum.xda-developers.com/showthread.php?p=39350626#post39350626
Now is my phone back, 100% working. I was very surprised, the flash counter was still saying "2". Probably, they have no time to check it. Or for service station is it OK to have more business. I did not pay any money.
I recently installed miui from official website for lg e975. My phone is lg f180 so they both are same.
It was working fine till this morning it asked for update. I allowed. It retarted and now it starts shows google logo. Then goes to recovery.
I flashed my original backup rom. Then even flashed miui rom. Nothing changes. I wiped cache. Data dalvik a lot of times.
It just starts shows google logo. Goes to recovery. Please help
Im sorry if this thread doeant belong here. Mods please move
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
awais3344 said:
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
Click to expand...
Click to collapse
Flash stock zip kernel from artmod thread.
the problem is. I can't upload any files to mobile phone. if i connect to pc, it turns on, goes to recovery, so I click on mount storage, and other mount option, nothing happens. My computer detects phone as F180L with a exclamation mark.
If i go to download mode, and then try to flash any KDZ file from all the f180 KDzs. It gives me errors.
LG Support Tool on entering serial number and model name says "check out serial number and model"
ADB never detects my phone. So I can't upload anything.
No option to upload files via SD Card.
ok, so I have no clue what happened :crying: phone was in download mode. I did nothing, but only installed LG Support Tool USB driver, while the mobile connected.
Then I installed Microsoft .net framework 4.0. And my phone is now qhs_usbdload. it's officially bricked now. I have no clue what happened. This is all that happened before I restarted and selected "reboot to bootloader" and its dead. So there's nothing left to do but throw it out
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
1. Why is this in Development section?
2. You can't mount internal SD as USB storage. Use adb push or adb sideload instead, that will help you to get the files onto your phone.
awais3344 said:
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
Click to expand...
Click to collapse
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
artit said:
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
Click to expand...
Click to collapse
My phone is acting weird. Sometime it would start. Sometime the red light would blink. Sometimes the red light wouldn't blink at all. Then sometimes, it starts. And then it doesn't.
I have no clue what is going on with it.
But it went to download mode many times again, it would go to fastboot, bootloader, recovery etc. Then sometimes it will not respond to any buttons at all! I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
awais3344 said:
I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
Click to expand...
Click to collapse
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Regarding the charging problems, I had that once. I was able to startup the phone by simply using a 2A charger instead of the LG's 1.2A.
When I had this issue it was charging while in recovery. Please look at this post and flash your kdz.
http://forum.xda-developers.com/showthread.php?p=54934779. This one helped me http://forum.xda-developers.com/showthread.php?p=53728658
Sent from my LG-E975 using XDA Free mobile app
kt-Froggy said:
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Click to expand...
Click to collapse
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
awais3344 said:
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
Click to expand...
Click to collapse
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
huy_gm said:
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
Click to expand...
Click to collapse
Hi, regarding that. I was able to sideload exitrecovery.zip file. It goes to 100% then nothing happens. Nothing happened on phone screen as well.
And can you send me link to that stock zip kitkat? i have a miui.zip and few other roms that I have not tried. thanks
Edit: also what should I do about adb, am i doing correct?
Becuase in adb devices, my device is displayed with deviceID sideload
And i have only pasted adb folder, with a dll and a zip file, there is nothing else, do I need to install SDK?
I tried lg flash tool 2014 again, and it flashed, I swear yesterday I tried to flash it, and after clicking on it, it never showed me country and language selection menu, so it would sit there and do nothing. now I don't know how but it did it :laugh:
thank you so much you'all
I've had this old note II pretty much since it came out have had plenty of ROMS on it and normally have had no problems. I recently had SlimKat on there and I was having battery life issues so I reinstalled it to no avail, so then I tried moving to Blisspop and that fixed the battery life issue some but I was having issues with crashing and the proximity sensor not registering during calls. I found a thread with this issue that directed me to Shift Kernal as a solution to the proximity sensor and crashing issues. I reflashed Blisspop, flashed the Shift kernel, then Gapps and now I have a brick. Upon turning on the phone it gets stuck on the Samsung boot screen. It won't open CWM recovery anymore to access my nandroid backups. I can get it into download mode but I cannot get my computer to recognize the phone as a USB device anymore. I have tried different drivers, cords, usb ports, and even different computers so I assume thats not the issue. Any suggestions would be helpful or even just telling me its a definite hard brick so I'll quit tinkering with it.
If you can get DL MODE it's not a brick...
Reflash of a stock rom via Odin should help...
Device could have partition damage...but I'd avoid the PIT flash until after the stock rom attempt..
I don't know what bootloader you have...but if you have version 4.2 or lower then flash a complete stock rom..
If you have 4.3 official or higher...then use an ODIN version from Zen Arcades threads as they don't contain the loader image...g
gregsarg said:
If you can get DL MODE it's not a brick...
Reflash of a stock rom via Odin should help...
Device could have partition damage...but I'd avoid the PIT flash until after the stock rom attempt..
I don't know what bootloader you have...but if you have version 4.2 or lower then flash a complete stock rom..
If you have 4.3 official or higher...then use an ODIN version from Zen Arcades threads as they don't contain the loader image...g
Click to expand...
Click to collapse
I can get it into download mode but when I connect it to a computer its not recognized as a device and therefore doesn't show in ODIN to flash those ROMs. Is there anyway to force recognition of a USB device. I've tried pretty much every combination of cord, usb port, driver and computer to get it to connect to ODIN but haven't had any luck.
hlhastie09 said:
I can get it into download mode but when I connect it to a computer its not recognized as a device and therefore doesn't show in ODIN to flash those ROMs. Is there anyway to force recognition of a USB device. I've tried pretty much every combination of cord, usb port, driver and computer to get it to connect to ODIN but haven't had any luck.
Click to expand...
Click to collapse
Ouch...
Well....beyond switching versions of Odin...(you've likely done this already)...the only action you could take would be a direct ADB push to the device...
It's been 2 years since I've attempted that...and can't remember the thread locations for the tutorials.
There is also the possibility that the EMMC is damaged.
My second device had this failure and I never recovered it...
I'm sorry that I can't provide links...but I know the threads exist.
So start a search and I'll do the same...g
Edit:
I keep coming back too a PC environment problem...(perhaps)
Run Odin as admin only...and quadruple check those USB drivers...making sure to completely uninstall the old version before loading new drivers.
Also..try using Odin 1.85....not 3.09...as it is a bit more reliable.
Also use only a factory cable connected to the PC mother board only...no front ports...
Plug in the device in download mode then reboot the PC and then open Odin...
Brainstorming here and hoping it'll trigger that dang "added" symbol for ya....g
Thanks I'll try those and see what happens!
I prefer Odin 3.07 on a Win7 machine.
I see the thing...
You damaged your bootloader, try re-flashing it through Fastboot on ADB, if tour pc does not recognize the device then try to install the latest USB drivers for your model.
Sent from my VF-895N using XDA Free mobile app
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
alright guys im in a bit of a fix here . was trying to root and install cwm ,everything went fine until i started the flash on odin, it got stuck at .system image in the flash process. so i unplugged the cable. now all i have i a green screen with a big white triangle with exclamation matk inside with text underneath stating there was an error updaing software and to use the emergency recovery function in smart switch app on a pc. when i try to do that i get message 'device not supported' . any ideas how i can get out of this fix and get my device sorted? i cant get into download mode by pressing the buttons, im just stuck on the green screen with triangle.
indup said:
alright guys im in a bit of a fix here . was trying to root and install cwm ,everything went fine until i started the flash on odin, it got stuck at .system image in the flash process. so i unplugged the cable. now all i have i a green screen with a big white triangle with exclamation matk inside with text underneath stating there was an error updaing software and to use the emergency recovery function in smart switch app on a pc. when i try to do that i get message 'device not supported' . any ideas how i can get out of this fix and get my device sorted? i cant get into download mode by pressing the buttons, im just stuck on the green screen with triangle.
Click to expand...
Click to collapse
Close Odin - re-start odin - put all the stock firmware files in their respective slots in odin - plug into your phone - and start odin - it should work - it will help you get back to stock.
Once you are rebooted in stock, go thru normal setup - double check to maker sure the Bootloader unlock is still greyed out - and then start over and do it again.
yuo may have had a bad file so I would suggest getting new files for root flash - install magisk ap - go thru the process of patching a new AP file - download the new TWRP posted by Dr Ketan (It is in the TWRP Folders from the TWRP thread) and then try again.
Good Luck.
thanks for the reply, i have tried many times just as you have suggested but every time the flash doesnt move on from '.system image'
indup said:
thanks for the reply, i have tried many times just as you have suggested but every time the flash doesnt move on from '.system image'
Click to expand...
Click to collapse
Pardon my butting in as I haven't rooted a phone in years, but you might try combinations of different computer / USB port / USB cables. I often seemed to have cables that were usually fine but would mess up firmware flashing. Sometimes a particular USB port on my computer was iffy. And a computer that had been freshly set up and doesn't have much in the way of background processes running can help. Good luck.
ok thanks for the help. i tried another usb cable that wasnt usb-c to usb-c that came with the note 10+. i actually used the old style usb to usb-c cable that came with the note 8 and it worked first time and flashed in a few minutes. thanks again guys
Same thing worked for me. I could not flash with ODIN or restore via Smart Switch. Nothing would work but as soon as I switched to an old USB to USB-C cable, ODIN was able to flash the firmware. Man I thought my phone was bricked for sure.
Just an FYI, Samsung has a backup bootloader screen ( this is the 2nd or emergency bootloader, see this and you are really on your last chance to fix)- the screen you were stuck on. If you have this you MUST flash back the stock rom, (generally the last major update rom if it is a version change like 8 to 9 as the bootloader won't recognise older version). It MUST be matching in CSC or you may very well brick your device completely and as you found out, use the cable that came with the phone. Not all usb-c cables are the same...
Any other flash is generally destined for failure and will result in a Hard brick... Good reason to know what your CSC is...