Related
Here is simple guide to mod your galaxy s2 and make it like a pure google phone:
WHAT YOU NEED:
- STOCK ROM ICS 4.0 (MINE XWLP7 ICS 4.0.3)
- ROOT PERMISSION
- CWM
- ROOT EXPLORER
- SD MAID PRO
FIRST: ROOT YOUR PHONE
SECOND: DOWNLOAD ROOT EXPLORER AND SD MAID PRO (OR TITANIUM BACKUP)
THIRD: DELETE/FREEZE USELESS APPS (DELETED APPS WONT RETURN WITH FACTORY RECOVERY) WITH SD MAID (OR TITANIUM BACKUP)
LIST: apps safe to remove
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
THEN REBOOT
FOURTH:
REMPLACE THOSE APPS IN SYSTEM/APPS AND REBOOT (SOMETIMES WHEN REMPLACING THE SYSTEM WILL CRASH BUT REBOOT AND ALL WILL BE FINE)
APPS:
https://www.dropbox.com/sh/qiyuzrut7zcw5op/_2FCgq7WpL
BACKUP: “””ATTENTION! I HAVENT A BACKUP FOR THE TWLAUNCHER AND CONTACTS.APK!!! SAVE IT”””
https://www.dropbox.com/sh/kkk6qh9y8z36xz0/cqtx-iQcvm
SIXTH:
CHANGE THE DEFAULT SYSTEMUI REMPLACING IT WITH A REAL ICS SYSTEMUI, FOLLOWING THIS THREAD
http://forum.xda-developers.com/showthread.php?t=1443498
SEVENTH: DELETE ALL JUNK FILES (SD MAID OR WIPE CHACHE ECC..) AND REBOOT
LAST
1) INSTALL (IF U WANT) DROIDWALL FROM MARKET AND MANAGE YOUR DATA CONNECTION
2) PUT THIS WALLPAPER IN SYSTEM/APPS SET PERMISSIONS TO RW-R-R
(SUMMER BEACH WITHOUT LOGO)
https://www.dropbox.com/s/h64xmzphbf5plje/Ocean_weather.apk
*BE ADVISED THAT IF SOMETHING IF SOMETHING GO WRONG, PROBABLY SOMETHING BAD HAPPENS TO YOUR PHONE*
AT LAST:
SORRY FOR MY AWFUL ENGLISH
Or install cm9
NZed said:
Or install cm9
Click to expand...
Click to collapse
+1
Or the F1 GalaxyNexus Rom for a truely pure google experience.
Or anyother aokp rom
it would be nice to have the aosp dialer and contacts and not just the icons...but i guess that will never be possible because of the framework differences...
Ofc install a new rom will be better.... This is for the ones that don't want doit
Sent from my GT-I9100 using xda premium
The 3 Kings
The Disclaimer: It's not my fault if you brick, break, or destroy your phone with this theme.zip ... This is a theme for PACman v1.4 flash the Superuser_0.9.7.zip & reboot when it's finished.PrimoC (CDMA) only (not tested on GSM), Boot into recovery (I'm using CWM 6.0.1.5) & wipe the cache partition, then select advanced & wipe dalvik cache, then select go back, then select install zip from sd card, then choose zip on sd, then flash the theme zip, Then reboot & enjoy should take 3-5 min to boot.
What's Themed:
Adobe Flash Player 11
Apollo Music Playeru
Bluetooth
Browser
Busybox
Calculator
Calendar
Chrome Bookmarks Sync
Contacts
Desk Clock
Development
DSP Manager
Email
Exchange 2
File Explorer
File Manager
Framework
Gallery
Gmail
Genie Widget
Google Playstore
Google Quick Search
Goo Manager
Keyboard
Mms (Messaging)
Phone
Ringdroid 2.5
Rom Preferences
Rom Manager
Settings
Sound Recorder
Spare Parts
System UI
Google Talk
Theme Manager
Think Free
Trebuchet Launcher
Virgin Mobile Account App
Video Editor
Voice Dialer
You tube
Extra Goodies Added:
Custom Boot animation, Custom ringtones, notifications, & Alarm tones added, themed apps added: Adobe flash player 11, File Manager, Gmail, Goo Manager, Busybox, Quick Search, Ringdroid, Rom manager.
The 3 Kings Theme zip Download Link: http://d-h.st/1pd
Boot Image Download Link: http://d-h.st/loQ
Just in case
Superuser 0.9.7 Root zip Download Link: http://d-h.st/Mvb
PACman v1.4 Rom Download Link: http://forum.xda-developers.com/showthread.php?t=1948034
Special Thanks Goes To: G60Madman, Mantera, Marc12868, & The Cyanogenmod Dev Team.
Hope you all enjoy this theme.
there is no boot image in the zip from that boot image link you posted.
You don't need the boot image for my theme to work, it's more of a just in case something goes wrong you'll have the PACman 1.4 boot image, but I haven't had any issues with my theme boot looping, but you never know.
gapps-slim1.6_CM11_kk4.4.4.zip (your link to simplicity) change-log coming to post #7.
Recent changes:
Google Play 5.0.31
Google Play services 6.1.74
new Link2SD script added to avoid remounting script and reboot after gapps flash; thanks to Fiouz @ XDA for original script
edited 70-gapps.sh to set default media tones; no guarantees, seemed to work the one-time I tried it. Test it; adjust to preference.
Removed Google Calendar and corrected script to allow CM Calendar to update with nightlies, when applicable.
more script changes to hopefully make the important steps 2-4 below less important (let me know)
more suggestions at post 6
Important! (prior to flash):
1) BACKUP; if you want to skip steps 2-4 or if your encounter problems, goto recovery and wipe data, manually format system, flash CM ROM, flash gapps, restore user apps only (not any Google Apps unless they are missing; ie, Google Search. Missing apps found in Google Play store)
2) goto Manage apps/Downloaded and uninstall updates to Google Play and Google Play Services (this update places Google Play 4.9.13 and Google Play Services 6.1.09 in /system
3) launch a root browser and goto /system/addon.d and delete 70-gapps.sh and 91-cm.sh
4) it's helpful to uninstall keyboards other than the Google L development keyboard used in this gapps (use Titanium Backup or Link2SD to uninstall it); the integrated scripts will remove CM-AOSP KB (Have a preference for a different keyboard? -see post 5)
Note: Your CM Nightly updates can be downloaded and installed by the integrated CMUpdater without overfilling system. Also, gapps will be restored as flashed until 70-gapps.sh is removed or the system is manually formatted prior to ROM flash. Relax; it's auto-magically done without returning to recovery each update. More bloat is being removed -see change-log post 5
Suggested use: Flash prior to next CM11 nightly update to:
1) automatically remove CM wallpapers and AOSP keyboard with each CM11 update. Still supported but epicmtd is now a mini ROM build
2) automatically backup and restore /system gapps with each CM11 update (includes: Google Play version 5.0.31, Google Play Services 6.1.11 and Google L developer edition keyboard (with three themes in advanced settings).
(suggestions and disclaimers)
*Recommend flashing initially as clean install; scripts have been modified to flash prior to nightly but dirty flash at own risk. Subsequent updates of CM 11 nightlies can be done retaining userdata, if preferred, but do so at own risk.
**If not using with clean install on initial flash, may require manual removing of original keyboard in /data partition.
***A recommended trial of these gapps could be done prior to flashing another CM nightly. Backup first. If flashing this shows problems, the userdata may need wiping or manual cleaning prior to flashing nightly and gapps. Once in place and functioning, the /system/addons.d scripts will restore minimal gapps and Google L keyboard as well as remove the bloat each update. Therefore, you can simply use the integrated CM Updater in System settings/About phone/CyanogenMod updates to download and update without manually flashing in recovery.
****Any missing Google apps should be available in Google Play.
FYI: deleting the /system/addon.d scripts manually or manually formatting system partition will defeat the auto backup and restore of this custom gapps with bloat melt.
Advantage? Free up available system and data space occupied by infrequently used gapps or outdated ones. No manual bloat melt or modifying ro partitions required. Automatically repeats manual steps... advanced users can modify to automate most manual steps repeated in CM nightly updates. (One step I still repeat manually after each boot is to cycle location toggle.)
(hints and suggestions for advanced users)
You can add your own preferred user apps at /data/app location of .zip archive using your computer but only recommend that for clean installs. If so, use this once for dirty flashing over existing userdata, your updated custom version once for each clean install. (more after disclaimer)
*disclaimer: nightlies sometimes require clean installs due to changes; dirty flash and customize this at own risk. Always backup prior to flash in case of problems.
Within reason, I can attempt to help with in-demand changes to this. To edit for more /system app removal, look into META-INF\com\google\android\updater-script and follow the method in original to make changes take each gapps flash for clean install. You'll also need to edit /system/addon.d/91-cm.sh following that method to make same changes permanent. To add user apps for clean installs, simply download to computer, open the archive and copy your preferred user apps to /data/app folder (updater-script is already modified for permissions).
Note: for those of you that like to manually format /system prior to flashing nightlies, I've looked at the CM11 updater-script and normal format does indeed take place after backing up per addon.d scipts. For example, the CM50 script actually backs up your /system/etc/hosts and rewrites to same location after its normal system partition format. This is useful for those that use apps that modify hosts to block ads. But, formatting prior to flashing could be useful if you happen to suspect a /system/addon.d backed up script was causing you problems.
Note2: I had given up on using addon.d scripts to restore scripts like Link2SD or Xposed framework but now seem to have some scripts that work for CM Updater updates over userdata; they simply eliminate a couple of manual steps within the applications and the reboot that would follow those steps. This is a safer mod, minimizing risks using the existing user scripts rather than flashing an individual's personal script. Post 3 may contain a future update for advanced users with additional scripts for backing up and restoring Link2SD sdext2 partition remount script backup and restore during CM update as well as Xposed framework /system/bin/app_process and app_process.orig backup and restore as needed. WIP; update coming soon.
Note3:There is potential to gain more system partition space available but preferences vary. Keep in mind that scripts will only impact /system partition. A customized version would be required if advanced users wish to add user apps to /data/app like user tools and apps that load quicker in a flash rather than download or side-load apps.
Note4: I've read other CM forums and latest gapps are recommended. Looking through the changes, I agree. I will try to keep this updated, if needed.
added CM Updater support!
Thanks to CMNein and blowtorch in this thread:
[Tutorial] CM9/CM10/CM10.1 back up script along with one other source that I lost in tapatalk, got this CM Updater support working for CM11 Nightlies for both backup and restore gapps as well as melting the bloat. If anyone knows the other source, please let me know so I can thank and give credit but the script is almost identical to the one linked.
Same apps; different scripts. Flash this one to make the backup and restore proper and continual (follow the asterisk comments for conditions)
change log:
1) added appropriate support to 70-gapps.sh to backup the right gapps and keyboard when flashing new nightly without requiring flash of gapps each time(*)
2) added new 91-cm.sh script to melt the bloat each time OTA CM Nightly is flashed.
3) consequently, changes 1 & 2 now make it possible to update CM Nightlies without having to flash gapps each time(**). I came to this realization a bit late
(*)provided that system is not manually formatted (Allow the CM scripts to backup, format system and restore gapps.)
Note: to use different gapps, format system manually or delete /system/addon.d/70-gapps.sh prior to flashing new gapps)
(**)System settings/About phone/CyanogenMod updates/update types: All versions (press the nightly version for changelog; icon gives option to download, install or indicates current version installed) Limit visits to recovery:good:
In summary: you can flash this once and forget about flashing gapps again on nightlies. Works with the integrated CM Updater also (manually formatting system or deleting /system/addon.d/70-gapps.sh and 91-cm.sh will keep these changes from automatically restoring. Editing those scripts can save you time and pose less risk editing ro partition prior to boot.)
version 1.1
advanced user scripts for Link2SD and Xposed framework
gapps-SlimAdv1.2_kk-20140606-signed.zip
(Outdated; merged scripts into one release. See post #4)
refer to edited OP for advanced user discussion (spoiler or hidden text)
same gapps but added a couple of new scripts to support backup and restore of Link2SD and Xposed framework when updating CM with integrated updater while retaining userdata
changelog:
1) added 89link2sd.sh script to backup and restore user's mount script at /system/etc/init.d when updating CM
2) added 90-exposed.sh script to backup and restore /system/bin/app_process if using Xposed framework. Thanks to rovo89; script pulled from link in his OP
Note: if not using either of the above applications, just use version 1.1 referenced in previous posts.
Note2: if one of these scripts do not apply, you can open archive of zip and delete the script not needed without breaking the zip for flashing.
Disclaimer: Use at own risk; currently testing on CM Nightly 20140809.
If you've encountered CM theme or theme update install errors with Google Play since the 4.9.13 update, this gapps update may help; install and use the workaround below the changelog... if not having issues, stay with what works until a CM 4.4.4 Gapps is released.
changelog:
1) updated Google Play to 4.9.13; installs to system partition
2) removed backup/restore of /system/priv-app/GmsCore.apk in /system/addon.d/70-gapps.sh (no longer needed for CM updates)
(after next CM update, you should see a little more system partition available space)
Note: this update includes the advanced scripts 90-xposed.sh and 89link2sd.sh; open zip archive and delete from /system/addon.d if not needed (optional but not necessary; the scripts are there if ever needed for Link2SD or Xposed framework mods).
Note2: this update is only intended for those encountering update or install error in the new Google Play version 4.9.13 (don't update if not having issues; follow the workaround, if needed).
Install instructions:
If you have Google Play version 4.9.13, it's most likely on the data partition. Wipe its data in System settings/apps/Downloaded/Google Play Store and Uninstall the update.
Flash the updated Gapps. If having problems, go to System settings/apps/All and clear data to Google Play services, Google Play Store and Google Services Framework and reboot.
Workaround:
for Google Play Store install errors -24, -110: go to System settings/apps/All and clear data to Google Play services, Google Play Store and Google Services Framework and reboot.
If you encounter Google Play install install error -401 or -400, consider your CM theme may be causing this and revert back to original CM holo (Default) theme in System settings/Themes, freeze Link2SD and Link2SD Plus, go to System settings/apps/All and clear data to Google Play services, Google Play Store and Google Services Framework and reboot. After successfully installing or updating the problematic application, select desired CM theme and unfreeze Link2SD. The 400 hundred series install errors may be rare but I've notified the application developers of the issue.
Notes for Link2SD users:
1) after a CM update, launch the Link2SD application, wait for it to load and "clean up the 2nd partition" in the "more"/left tab slide-out. Don't click OK but read the details and note that you most likely need to "Link dalvik-cache" files in the "more"/left tab slide-out after each update. I've found it's important to wait until the application fully loads to check; otherwise, you may be causing more steps to get your linked files restored and keep the redundant files out of the internal memory.
2) if you have Google Play services update 5.0.89 in Downloaded tab of System settings/Apps, you no longer need the dalvik-cache file [email protected]@[email protected] (you can safely delete it when running the "clean up the 2nd partition" in the "more"/left tab slide-out (if deleting, reboot once more) . You should not see it again after updating CM with the CM updater.
gapps-Slimv1.3-_kk-20140606-updated.zip
change-log for gapps-slim1.4_CM11_kk4.4.4.zip update
Still don't see an official CM gapps for Android 4.4.4; this is an OTA update pulled from apk's pushed to my phone by Google
gapps-slim1.4_CM11_kk4.4.4.zip
Important: see OP (post 1) for update instructions; the old scripts need to be flushed and replaced. The gapps flash/updater-script should take care of that but to be sure, follow the manual steps.
Themes: some themes or theme updates pulled from Google Play WILL (if you have Link2SD installed and sdext2 partition is visible) give you an update error -401 If this happens to you, the workaround in post # 4 above still applies.
change-log:
removed cm-91.sh bloat remover script and integrated into a new 70-gapps.sh
removed more bloat; necessary for larger Google Play and Google Play Services moving to /system
want custom ring tones? look into /system/addon.d/70-gapps.sh for ideas (for those that can edit scripts)
Warning: many media tones were removed as bloat. Check your tones for correctness; if needed, I can add these back in.
Note:
there is a limited space left in system if you choose to risk adding some back in. During testing, the old method was actually maximizing system capacity before the bloat was removed. Therefore, a change to delete the bloat prior to writing/restoring the larger apps from gapps was necessary. If you've ever experienced lag after installing or restoring gapps during CM updates, these scripts are necessary to avoid that mishap. The scripts and updates also keep the updates from landing in /data partition, using more of your internal storage space while the system space is not utilized to its fullest capacity (until next Google update pushed OTA). If you've tried this update before, please try it again and make sure no redundant updates are in /data partition.
Tones retained:
ringtones: Orion, Themos, Kuma
alarms: Argon
notifications: Argon, Altair, Proxima
Extra bloat removed:
Apollo.apk
Galaxy4.apk
NoiseField.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
LiveWallpaperspicker.apk
MagicSmokeWallpapers.apk
VideoEditor.apk
VisualizationWallpapers.apk
PhaseBeam.apk
PhotoTable.apk
PhotoPhase.apk
MediaUploader.apk
New Google Play, Services and more scripts
gapps-slim1.5_CM11_kk4.4.4.zip
What's new:
Google Play 5.0.31
Google Play services 6.1.11
new 88-link2sd.sh script added to avoid remounting script and reboot after gapps flash; thanks to Fiouz @ XDA for original script
more script changes to hopefully make the important steps 2-4 from OP less important (let me know)
What's important?
see OP, post 1. You can try the easy way of flashing prior to next nightly or unofficial nightly; the scripts should restore gapps and keep the ROM build "mini"
Check your tones; pull from another nightly ROM or customize as this is done in /system/addon.d/70-gapps.sh script
Xposed framework support was removed; if you need the script, pull from an older gapps version or from here; the bottom script. Hit the thanks button while you're there (the script inspired the latest 88-link2SD.sh used in this gapps release)
gapps-slim1.6_CM11_kk4.4.4.zip (Update)
gapps-slim1.6_CM11_kk4.4.4.zip
Changes:
Removed Google Calendar and corrected script to allow CM Calendar to actually update, when CM applies applicable update
updated Google Play Services to 6.1.74
attempted to set default media tones within the 70-gapps.sh; no guarantees. Thought it worked the one time I tried it but without data wipe so IDK.
FYI: can't test the flashes against the Epic any longer; mine got traded-in for the Note 4 ($200 BB gift card), Friday Oct. 17, 2014. Retired. Farewell Epic forum. Peace.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
MIUI 8
DeBloat
Patch 22.10.2017
Hello XDA community. This is my first forum thread. I have decided to release my MIUI 8 version for S4 (i9505). Please be patient, Feel free to give suggestions and help improve my project.
NEW! KERNEL
Download Mega:
1. Stock kernel
2a. Kernel-V2 from Miui8-R5
Changelog:
Delete moduls
Delete Stweaks.apk
Delete some files
2b. Kernel-V3 from Miui8-R5
changelog:
new default settings
stweaks_boot_control=yes
scaling_max_freq_cpu0=1890000
scaling_max_freq_cpu1=1890000
scaling_max_freq_cpu2=1890000
scaling_max_freq_cpu3=1890000
scaling_min_freq_cpu0=384000
scaling_min_freq_cpu1=384000
scaling_min_freq_cpu2=384000
scaling_min_freq_cpu3=384000
gentle_fair_sleepers=off
arch_power=off
power_efficient=off
scaling_max_gps_freq=1890000
scaling_max_suspend_freq=1242000
scaling_max_oncall_freq=1350000
scaling_min_suspend_freq=384000
cpu_voltage_switch=on
CPUVOLT1=1150000
CPUVOLT2=1112500
CPUVOLT3=1075000
CPUVOLT4=1037500
CPUVOLT5=1000000
CPUVOLT6=975000
CPUVOLT7=962500
CPUVOLT8=950000
CPUVOLT9=925000
CPUVOLT10=900000
CPUVOLT11=887500
CPUVOLT12=875000
CPUVOLT13=875000
CPUVOLT14=875000
CPUVOLT15=875000
scaling_governor_cpu0=interactive
scaling_governor_cpu1=interactive
scaling_governor_cpu2=interactive
scaling_governor_cpu3=interactive
up_threshold=70
up_threshold_at_min_freq=60
sampling_rate=20000
sampling_down_factor=1
freq_step=30
down_differential=5
freq_for_responsiveness=486000
down_threshold=30
inc_cpu_load_at_min_freq=60
inc_cpu_load=70
dec_cpu_load_at_min_freq=60
dec_cpu_load=70
freq_for_responsiveness_max=1890000
freq_responsiveness=1242000
pump_inc_step_at_min_freq_1=2
pump_inc_step_at_min_freq_2=2
pump_inc_step_at_min_freq_3=2
pump_inc_step_at_min_freq_4=2
pump_inc_step_1=2
pump_inc_step_2=2
pump_inc_step_3=2
pump_inc_step_4=2
pump_dec_step_at_min_freq_1=2
pump_dec_step_at_min_freq_2=2
pump_dec_step_at_min_freq_3=2
pump_dec_step_at_min_freq_4=2
pump_dec_step_1=1
pump_dec_step_2=1
pump_dec_step_3=1
pump_dec_step_4=1
freq_step_at_min_freq=30
freq_up_brake_at_min_freq=20
freq_up_brake=20
freq_step_dec=10
freq_step_dec_at_max_freq=10
cpus_up_rate=1
cpus_down_rate=1
cpuhotplugging=2
hotplug_sampling_rate=50
hotplug_rate_1_1=1
hotplug_rate_2_0=1
hotplug_rate_2_1=2
hotplug_rate_3_0=2
hotplug_rate_3_1=2
hotplug_rate_4_0=2
hotplug_freq_1_1=1242000
hotplug_freq_2_0=810000
hotplug_freq_2_1=1242000
hotplug_freq_3_0=810000
hotplug_freq_3_1=1242000
hotplug_freq_4_0=810000
hotplug_load_1_1=60
hotplug_load_2_0=20
hotplug_load_2_1=60
hotplug_load_3_0=20
hotplug_load_3_1=60
hotplug_load_4_0=20
hotplug_rq_1_1=100
hotplug_rq_2_0=100
hotplug_rq_2_1=150
hotplug_rq_3_0=150
hotplug_rq_3_1=150
hotplug_rq_4_0=150
maxcoreslimit=4
maxcoreslimit_sleep=2
cpus_boosted=2
hotplug_suspend=always_active
min_cpus_online=1
max_cpus_online=4
msm_thermal=intelli_temp
core_control=1
core_mask=2
core_limit_temp_degC=70
limit_temp_degC=60
temp_hysteresis_degC=5
governor=ondemand
max_pwrlevel=0
min_pwrlevel=3
thermal_pwrlevel=0
gpu_voltage_switch=on
GPUVOLT3=1100000
GPUVOLT2=1000000
GPUVOLT1=895000
input_boost_freq=1350000
input_boost_ms=50
min_input_interval=1050
nr_boost_cpus=4
intsd_read_ahead_kb=1024
extsd_read_ahead_kb=1024
mmc_mode=performance
internal_iosched=sioplus
sd_iosched=sioplus
auto_oom=on
enable_adaptive_lmk=on
vm_pressure_adaptive_start=75
vmpressure_file_min=78
enable_process_reclaim=on
pressure_max=80
oom_config_screen_on=aggressive
oom_config_screen_off=aggressive
lowmem_reserve=high_pressure
dirty_background_ratio=5
dirty_ratio=20
vfs_cache_pressure=100
swaptweaks=0
zramtweaks=768
swappiness=50
run=on
uksm_gov_on=medium
uksm_gov_sleep=quiet
sleep_millisecs=1000
crontab_switch=off
cron_drop_cache=off
cron_reset_systemui=off
cron_fstrim=off
cron_process_reclaim=off
cron_ram_release=off
ad_block_update=off
cron_db_optimizing=off
cron_clear_app_cache=off
led_lowpower_current=40
led_highpower_current=40
led_fade_in_time=1
led_fade_out_time=4
led_fade=on
led_fade_dt1=1
led_fade_dt2=1
led_fade_dt3=2
led_fade_dt4=3
gpl_headphone_gain=40
gpl_headphone_pa_gain=12
gpl_speaker_gain=40
gpl_hdmi_spkr_gain=40
gpl_mic_gain=40
gpl_cam_mic_gain=40
gpl_headset_mic_gain=40
force_fast_charge=2
use_mtp_during_fast_charge=1
screen_on_current_limit=1
ac_charge_level=1900
usb_charge_level=1000
tcp_congestion_control=westwood
selinux_control=off
logger=0
gpsfixer=off
gpsregion=No_GPS_Zone_changes
init_d=off
pwm_value=50
usb_mode=default
auto_mount_sd=on
usb_keyboard=disable
cortexbrain_background_process=0
cortexbrain_memory=off
cortexbrain_system=off
cortexbrain_kernel_tweaks=off
cortexbrain_cpu=off
cortexbrain_io=off
for better liquidity, friendly battery and better RAM management
3. NEW KERNEL for SGS4-Miui8
Installation:
Flash via recovery
Wipe dalvik and cache
Rom based on CyanogenMod
Version 5 with GAPPS
Download Mega:
Miui8-jfltexx-R5-Gapps-DeBloat-mikussj3.zip
***********************************
Clean installation recommended
Do not restore apps from older android version through titanium backup, install the apps from Play Store and only use Titanium backup to restore the app data for non system apps
***********************************
Installation:
ROM:
-save Miui8-jfltexx-R5-Gapps-DeBloat-mikussj3.zip in external card
-Delete all hide files and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: 'dctp' and 'did' (internal memory) and all folders: 'miui, mi, xiaomi, mi_drive, yymet...' etc from internal and external memory, delete folders 'Alarms,backups' (internal memory)
-Enter recovery mode
-backup your rom
-backup EFS
-factory reset
-format system, data, cach and dalvik
-install Miui8-jfltexx-R5-Gapps-DeBloat-mikussj3.zip from external memory (sd card)
-wipe cache, reboot
When boot complete
-time to time skip 'google play services stop'
- skip language and setup your bootsettings
- skip google account setup ('Got Google?' - tick 'NO')
When bootsettings done
- go to settings/installed apss/ Google Play services, 'App permissions' and tick all permissions
- go to settings/installed apss/ Google Contacts Sync, 'App permissions - Additional permissions' and tick permissions
- change language
- Change Region (read tips - second post)
- setup your GOOGLE ACCOUNT
- go to settings/Other accounts/Google - 'On' Contacts sync
done.
Version 5 without GAPPS
Download Mega:
Miui8-jfltexx-R5-NoGapps-DeBloat-mikussj3.zip
***********************************
Clean installation recommended
Do not restore apps from older android version through titanium backup, install the apps from Play Store and only use Titanium backup to restore the app data for non system apps
***********************************
Installation:
ROM:
-save Miui8-jfltexx-R5-NoGapps-DeBloat-mikussj3.zip in external card
-Delete all hide files and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: 'dctp' and 'did' (internal memory) and all folders: 'miui, mi, xiaomi, mi_drive, yymet...' etc from internal and external memory, delete folders 'Alarms,backups' (internal memory)
-Enter recovery mode
-backup your rom
-backup EFS
-factory reset
-format system, data, cach and dalvik
-install Miui8-jfltexx-R5-NoGapps-DeBloat-mikussj3.zip from external memory (sd card)
-wipe cache, reboot
When boot complete:
- skip language and setup your bootsettings
When bootsettings done:
- change language
- Change Region (read tips - second post)
done.
Go to second post and read tips and changelog.
BUGS:
1. region after reboot is china (read tips - second post)
2. Edit your APN or use TEXTRA APK if you have MMS problems (some testers reported an MMS problem)
3. Call recording
4. Long screenshoot (Scrolling)
5. Front camera dont work (in miui camera)
***You tell me ***
Full DeBloat Script post 3
Version 4
Download Mega:
Miui8-jfltexx-R4-NoGapps-mikussj3.zip
In connection with the PROVISIONS.APK prose I decided to not include GAPPS
***********************************
Clean installation recommended
Do not restore apps from older android version through titanium backup, install the apps from Play Store and only use Titanium backup to restore the app data for non system apps
***********************************
Installation:
ROM:
1.
-save Miui8-jfltexx-R4-NoGapps-mikussj3.zip in external card (SD card)
- save Miui_8_De-Bloat_Extreme_jfltexx-mini.zip in external card (SD card) from 'attached files'
-Delete all hide files and folders and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: dctp and did and all folder miui, mi, xiaomi, etc from internal and external memory
-Enter recovery mode
-backup your rom
-backup EFS
-factory wipe
-wipe system, data, cache and dalvik
-install Miui8-jfltexx-R4-NoGapps-mikussj3.zip from external memory (sd card)
- install Miui_8_De-Bloat_Extreme_jfltexx-mini.zip from external memory (sd card) (or not if you want full miui rom)
-wipe cache, reboot
2.
When boot complete
- skip language and setup your bootsettings
3.
When bootsettings done
- change language
- Change Region (read tips - second post)
microG:
download and unpack 'microG.zip', read instructions 'ReadMe.text'
microG.zip
or
GAPPS:
- Download latest Open Gapps from http://opengapps.org/
- reboot recovery
- flash open gapps
- wipe cache and dalvik
- reboot
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
OR USE CHINESE GAPPS INSTALLER from Attached Files
- install gapps
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
DONE
Go to second post and read tips and changelog.
BUGS:
1. region after reboot is china (read tips - second post)
2. Edit your APN or use TEXTRA APK if you have MMS problems (some testers reported an MMS problem)
3. Call recording
4. Long screenshoot (Scrolling)
5. Front camera dont work (in miui camera)
***You tell me ***
Full DeBloat Script post 3
Version 3
Download Mega:
Miui8-jfltexx-R3-NoGapps-mikussj3.zip
In connection with the PROVISIONS.APK prose I decided to not include GAPPS
***********************************
Clean installation recommended
Do not restore apps from older android version through titanium backup, install the apps from Play Store and only use Titanium backup to restore the app data for non system apps
***********************************
Installation:
ROM:
1.
-save Miui8-jfltexx-R3-NoGapps-mikussj3.zip in external card (SD card)
- save Miui_8_De-Bloat_Extreme_jfltexx-mini.zip in external card (SD card) from 'attached files'
-Delete all hide files and folders and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: dctp and did and all folder miui, mi, xiaomi, etc from internal and external memory
-Enter recovery mode
-backup your rom
-backup EFS
-factory reset
-format system, data, cache and dalvik
-install Miui8-jfltexx-R3-NoGapps-mikussj3.zip from external memory (sd card)
- install Miui_8_De-Bloat_Extreme_jfltexx-mini.zip from external memory (sd card) (or not if you want full miui rom)
-wipe cache, reboot
2.
When boot complete
- skip language and setup your bootsettings
- Important - leave selected locations
3.
When bootsettings done
- change language
- Change Region (after all reboot back to china):
MIXplorer: go to data/miui/cust/your region/cust.prop and copy all line to build.prop
REBOOT
GAPPS:
- Download latest Open Gapps from http://opengapps.org/
- reboot recovery
- flash open gapps
- wipe cache and dalvik
- reboot
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
OR USE CHINESE GAPPS INSTALLER from Attached Files
- install gapps
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
DONE
Go to second post and read tips and changelog.
BUGS:
1. region after reboot is china
2. After the restart, you will see the message "SD card - touch to open in explorer"
4. Edit your APN or use TEXTRA APK if you have MMS problems (some testers reported an MMS problem)
5. Call recording
6. Long screenshoot
***You tell me ***
Full DeBloat Script post 3
Of course, thank you very much to the beta testers, especially the
Szwajowy
marm0tte31
Version 2
Download Mega:
Miui8-jfltexx-R2-NoGapps-mikussj3.zip
In connection with the PROVISIONS.APK prose I have decided not to include GAPPS
***********************************
Clean installation recommended
Do not restore apps from older android version through titanium backup, install the apps from Play Store and only use Titanium backup to restore the app data for non system apps
***********************************
Installation:
ROM:
1.
-save Miui8-jfltexx-R2-NoGapps-mikussj3.zip in external card
-Delete all hide files and folders and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: dctp and did and all folder miui, mi, xiaomi, etc from internal and external memory
-Enter recovery mode
-backup your rom
-backup EFS
-factory reset
-format system, data, cach and dalvik
-unmount system and data
-install Miui8-jfltexx-R1-NoGapps-mikussj3.zip from external memory (sd card)
-wipe cache, reboot
2.
When boot complete
- skip language and setup your bootsettings
3.
When bootsettings done
- change language
- Change Region (after all reboot back to china):
MIXplorer: go to data/miui/cust/your region/cust.prop and copy all line to build.prop
REBOOT
GAPPS:
- Download latest Open Gapps from http://opengapps.org/
- reboot recovery
- flash open gapps
- wipe cach and dalvik
- reboot
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
OR USE CHINESE GAPPS INSTALLER from Attached Files
- install gapps
- go to settings/installed apss/ google play services, permissions and tick all permissions
- setup your account
DONE
Go to second post and read tips and changelog.
BUGS:
1. region after reboot is china
2. It does not work location in the weather, set your location manually
3. After the restart, you will see the message "SD card - touch to open in explorer"
4. Edit your APN or use TEXTRA APK if you have MMS problems (some testers reported an MMS problem)
5. Call recording
6. Long screenshoot
***You tell me ***
Version 1
Download
Link:
https://mega.nz/#!3URTQLhC!x8YzaDxROJ5k5JYgNqODeeEeaEPIwm3z6g5DV-qUTuc
installation:
-save Miui8-jfltexx-release1-by-mikussj3.zip in external card
-Delete all hide files and folders and 'Android' folder in internal memory (best way: format internal memory)
-If you come from 'miui rom' delete files: dctp and did and all folder miui, mi, xiaomi, etc from internal and external memory
-Enter recovery mode
-backup your rom
-backup EFS
-factory reset
-format system, data, cach and dalvik
-unmount system and data
-install Miui8-jfltexx-release1-by-mikussj3.zip from external memory (sd card)
-wipe cache, reboot
When boot complete
-time to time skip 'google play service stop'
- skip language and setup your bootsettings
- select theme 'high life' (deafult have bug- not display 2 icons)
When bootsettings done
- go to settings/installed apss/ google play services, permissions and tick all permissions
- change language
done.
Go to second post and read tips.
Unistall app - kernel tuner (i forgot delete)
Of course, thank you very much to the beta testers, especially the
Szwajowy
marm0tte31
Thanks to
ISF
ROM REVIEW HERE
If you like my work don't forget to hit the thanks button
Donate:
If you support my working project MIUI 8, consider a donation.
I’ll be very grateful for the coffee.
Special thanks to the donators
zetcamp
XDA:DevDB Information
Miui 8 Rom Samsung Galaxy S4 GT-I9505, ROM for the Samsung Galaxy S4 GT-I9505
Contributors
::mikussj3::
Source Code:
Miui Patchrom,LineageOS(CyanogenMod),Google,JDCTeam
ROM OS Version: 6.0.1
ROM Kernel: Linux 3.4.112
ROM Firmware Required: Compatible Custom Recovery
Version Information
Status: Stable
Created 2017-07-14
Last Updated 2017-11-20
TIPS
1. Change Region
MIXplorer:
Go to data/miui/cust/your region/cust.prop and copy all line to build.prop
REBOOT
2. install Xperia keyboard from attached files if you like it .
3. XPOSED - thanks to xell75
Download from here:
https://forum.xda-developers.com/xpo...-miui-t3367634
link broken
Download from attached files
Then go into recovery and Flash it, wipe cache and dalvik cache. thats it. Of Course you have to install the newest xposed apk too
Xposed.apk and xposed unistaller is here:
https://forum.xda-developers.com/showthread.php?t=3034811
4. MAGISK
Download and install magiskmanager-v*.apk. open it and download latest Magisk-v*.zip
Reboot to recovery and flash magisk_v*.zip
Link to magisk thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5a. APPLY THEMES not from the MIUI store, thanks Tweakforce_LG
A) download the .mtz file of the theme you want. Some good themes are from: https://xiaomininja.com/category/xiaomi/themes/
B) install MIUI theme editor: https://play.google.com/store/apps/details?id=com.mixapplications.miuithemeeditor
C) open the theme editor and open the .mtz file with it.
Advance through the on screen steps. Don't change anything in the actual editing part. Just finish and it will ask if u want to install the theme. Click yes and it will be in the theme list ready to apply'
5b Download paid theme (R4 and R5)
- Go to system/build.prop and delete '_global' from 'ro.product.mod_device=jfltexx_global'
- reboot
- go to theme.apk and download what you want
- recomended after aply theme: Go to system/build.prop and add '_global' to 'ro.product.mod_device=jfltexx'
-reboot
6. COMPAS
The compass works when the gps fixes the position.
If the gps does not fix the position, try this:
Install google maps, open them and set your position. As you position, close the google maps and open the compass. should be OK.
7. The screen is blury when the natural light is strong:
When the screen become blurry at sun, open Settings then go to "Other settings(Stock Settings) / Live Display / Display Mode" And tick Deactivated (off)
8. Set favorit MP3 like ringtons
- Rename your mp3 to easy name (ex: bass.mp3)
- copy mp3 to system/media/audio/ringtons (use mixplorer or another root files manager, set permisions 644)
- reboot
This make your mp3 like a system files. Now you can set mp3 like ringtons.
Changelog:
Version 5
- two versions (with gapps and without gapps)
- update 'data' app
- 'delete,modify' some files (more speed)
- add app for kernel settings
- more tweaks in 'build.prop'
- debloat (if you need some app - go to system/BloatsEX/... there are your app, if you dont need this bloat app - delete folder 'BloatsEX')
- and more...
- probably latest version on my rom
Version 4
- patch from 22.10.2017r
- unlock paid theme (only when delete '_global' from build.prop: 'ro.product.mod_device=jfltexx_global')
- Add some line to build.prop
- change kernel
- XiaomiAccount.apk some change with sign in
- cloud Without Sim Card
Version 3
- 5 switches in row notification panel
- Video.apk without Chinese characters
- new weather.apk
- add new icon pack
- add few line to build.prop
- patchrom 02.09.2017
Version 2
- add some wallpapers
- add 4 way to reboot
- hide search bar in the notification panel
- add few lines in build.prop
- new bootanimation
- patchrom 26.08.2017
Version 1
- initial release
Full debloat miui8
****Warning****
All you do is under your own responsibility.
This is the first release and may have problems that I'm not familiar with right now
****Warning****
1. Tips for speed and battery life (you can use without flash "Miui_8_De-Bloat_Extreme_jfltexx")
Other settings (stock settings)> LiveDisplay > Display mode > off
Lock screen & Fingerprint > Sleep > Set display 30 seconds delay
Sync > Off
Additional settings > Privacy > AD services > Turn Off
Notifications & status bar > Battery indicator > percentage
Battery & performance > Hide system animations
Developer options > Disable MIUI optimizations (reboot needed)
Developer options> window animation, transition animation, animator duration > set 0.5
2. Flash "Miui_8_De-Bloat_Extreme_jfltexx" from Attached Files in recovery
AFTER FLASH apps move (delete) from system:
Move (delete) from /system/app to /system/BloatsEX/system/app (You can manually move applications to system/app if you need one with MIXplorer)
Antispam
BugReport
CloudService
Email
FileExplorer
GuardProvider
MiuiCompass
NetworkAssistant2
Notes
PowerKeeper
XiaomiAccount
Move (delete) from /system/priv-app to /system/BloatsEX/system/priv-app (You can manually move applications to system/priv-app if you need one with MIXplorer)
Backup
Browser
CleanMaster
CloudBackup
ConfigUpdater
GoogleBackupTransport
GoogleFeedback
GoogleOneTimeInitializer
GooglePartnerSetup
MiDrop
MiuiGallery
Music
SetupWizard
Weather
WeatherProvider
Smal tips:
You can unpack "Miui_8_De-Bloat_Extreme_jfltexx" go to 'META-INF/com/google/android/updater-script and add '#' before the line with the app which you do not want to erase from ROM , for example:
Before:
...
run_program("/sbin/busybox", "mv", "/system/priv-app/Browser", "/system/BloatsEX/system/priv-app");
run_program("/sbin/busybox", "mv", "/system/priv-app/MiDrop", "/system/BloatsEX/system/priv-app");
run_program("/sbin/busybox", "mv", "/system/priv-app/Weather", "/system/BloatsEX/system/priv-app");
run_program("/sbin/busybox", "mv", "/system/priv-app/WeatherProvider", "/system/BloatsEX/system/priv-app");
...
After:
...
#run_program("/sbin/busybox", "mv", "/system/priv-app/Browser", "/system/BloatsEX/system/priv-app");
#run_program("/sbin/busybox", "mv", "/system/priv-app/MiDrop", "/system/BloatsEX/system/priv-app");
#run_program("/sbin/busybox", "mv", "/system/priv-app/Weather", "/system/BloatsEX/system/priv-app");
#run_program("/sbin/busybox", "mv", "/system/priv-app/WeatherProvider", "/system/BloatsEX/system/priv-app");
...
Now pack the files into a zip package and flash it in recovery
3. Install from Google Play Store 'AFWall+.apk' to disable Application access to wifi or Mobile data (you can use without flash "Miui_8_De-Bloat_Extreme_jfltexx")
4. Optional disable with Autorun Manager Pro.apk (Works but not tested in a long period of time)
App Store, disable all intents
Updater, disable all intents
Xiaomi service framework, disable all intents
***************************************************************
See screenshots (system applications after flash DeBloater)
***************************************************************
downloading
hell yes
Thank you very much for sharing. I'll try it for sure.
Enviado desde mi SM-A710F mediante Tapatalk
Is their ota and is it working
ive an issue with wifi.
On first start i can setup my wifi but when i rebooted i cant enable wifi again.
Excellent ROM is not found any fault, everything is going well
Now it's my favorite rom
I can only say, better make paypal donations account!
Is there a way to move apps to sd in MIUI Roms?
ac00995 said:
I can only say, better make paypal donations account!
Click to expand...
Click to collapse
I'll think about that?
Leone/kyleproxx said:
Is their ota and is it working
Click to expand...
Click to collapse
Ota not working
Thread cleaned.
Please do not reply to posts that you don't like and start arguments, and please stay on-topic. If you don't have anything constructive to post in reply to someone, just ignore it or report it if it is warranted.
Thanks
noppy22
Feedback for 2 hours use
The Rom works good except
1. FC of System UI in some cases, like taking a screenshot and pressing the back button.
2. FC of some apps that get installed from sources other than GP.
3. Some apps do not have icons.
4. SD card has serious issues like it doesn't appear on the PC after USB connect. Also, it doesn't appear in the explorer app which causes a FC.
5. SU binaries are occupied.
I really like it more than the other roms but it is still beta.
I can't wait to use this ROM when it gets out of beta
My wifi didnt work at first either, but I wiped and reinstalled, then it worked, so for anyone having
problems with wifi, try that once, taking the battery out works sometimes. Also the usb is defaulted for charging, so you
have to change it to file or photo transfer to see your sd card via usb.
AsnNasser said:
The Rom works good except
1. FC of System UI in some cases, like taking a screenshot and pressing the back button.
2. FC of some apps that get installed from sources other than GP.
3. Some apps do not have icons.
4. SD card has serious issues like it doesn't appear on the PC after USB connect. Also, it doesn't appear in the explorer app which causes a FC.
5. SU binaries are occupied.
I really like it more than the other roms but it is still beta.
Click to expand...
Click to collapse
Try reinstall rom with instruction OP.
Dont have bugs 1,2,5
3. Set another THEME
4.
A.
Default usb is only charge battery, set MTP transfer
or
B.
Are you set premissions sd card?
noppy22 said:
Thread cleaned.
Please do not reply to posts that you don't like
Thanks
noppy22
Click to expand...
Click to collapse
I do not understand, I like all posts and answer questions
mikussj3 said:
Try reinstall rom with instruction OP.
Dont have bugs 1,2,5
3. Set another THEME
4.
A.
Default usb is only charge battery, set MTP transfer
or
B.
Are you set premissions sd card?
Click to expand...
Click to collapse
I tried MTP and still same issue. I also installed a Chinese version of MIUI for S4 and it has more issues that this rom, some are similar so I believe the problem is caused by the difference in usage of Mi Phones and Samsung. Also TWRP doesn't work good, it shows 4 incompatible things also when I restore apps, it requires me to install them manually.
Got MicroG working on XA Nougat. I can't give a very clear guide, since it was all trial and error for me, but here's what I did:
- Patched framework.jar, (attached below), required to use MicroG.
- Made a backup of my rom, then deleted 10 folders from /system/priv-app, (after copying them to a temp directory): GmsCore, GoogleBackupTransport, GoogleExtServices, GoogleFeedback, GoogleLoginService, GoogleOneTimeInitializer, GooglePackageInstaller, GooglePartnerSetup, GoogleServicesFramework, and Phonesky.
- Factory reset, and flashed MicroG unofficial installer by @ale5000, (linked below). Phone didn't boot, (not surprised).
- Gradually added back some of the folders until the phone booted. I found out that the phone wouldn't boot without these 3: GoogleBackupTransport, GoogleExtServices, and GooglePackageInstaller.
- After I got the phone to boot, I found that I was stuck at "adding some finishing touches", after going through the setup screens, so I deleted SetupWizard folder.
- After rebooting, I got to home screen, but SystemUI was messed up, (no lock screen, no quick settings, etc.), so I did another data wipe/factory reset, then rebooted, and everything good now.
So, theoretically, with patched framework jar, you should be able to delete those 8 folders, (the 7 Google folders in priv-app, and Setup Wizard), then flash MicroG installer, and factory reset, and be good to go. I'm going to test more and see if there's a way to get rid of the remaining 3 files, since I wonder if they might defeat the purpose of having MicroG, (if they do the same background data/tracking-type stuff that the other Google apps do)...
MicroG installer - https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360
@levone1: Did you notice that microG unofficial installer already delete GApps (not everything but the things that most likely conflict)?
About background data/tracking-type stuff of 3 files I don't know since they aren't open source.
---------- Post added at 17:52 ---------- Previous post was at 17:33 ----------
Also deleting the Setup Wizard may cause unwanted side effects.
I'm not sure about all ROMs but in some ROMs some things doesn't get inizialized and you have less options in the ROM menu and possible other problems.
ale5000 said:
@levone1: Did you notice that microG unofficial installer already delete GApps (not everything but the things that most likely conflict)?
About background data/tracking-type stuff of 3 files I don't know since they aren't open source.
---------- Post added at 17:52 ---------- Previous post was at 17:33 ----------
Also deleting the Setup Wizard may cause unwanted side effects.
I'm not sure about all ROMs but in some ROMs some things doesn't get inizialized and you have less options in the ROM menu and possible other problems.
Click to expand...
Click to collapse
Thanks. I don't know much, just experimenting. I decided to manually delete, because I remember it not working when I tried to flash over stock on another Xperia, but didn't try on this one. I would be fine with keeping Setup Wizard, but I couldn't get past the 'few more things' part. Any ideas?
Have you tried this?
- Flashing ROM
- Applying signature spoofing patch (when the phone is inside recovery)
- Flashing microG unofficial installer
- Wipe cache, dalvik/ART cache, data, internal memory
- Restart phone
This procedure should be foolproof (almost).
The first start of the phone will be really long since it have to recreate the dalvik/ART cache.
PS: If there are other problems at boot please post a logcat.
About the 3 apk GoogleBackupTransport, GoogleExtServices, and GooglePackageInstaller:
- GoogleBackupTransport, generally you can remove this so I'm not sure (maybe try to disable backup in the settings first)
- GooglePackageInstaller, you cannot remove this because it replace the standard PackageInstaller and removing GooglePackageInstaller don't restore the original one
- GoogleExtServices, I don't know about this