It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!
Now dear friends I will give the solution of problems that occur after unbrick leeco pro3 who has internal storage problem like this
infinite thanks to my Chinese friend Hua found this solution by itself and thanks tora33 from leeco.re and mbtt from forum.one-teams(i use picture from him)
I'm not in charge of the operation to be performed, is designed to assist you in these processes
Charge your mobile phone
1) download : qfil, (that have correct partition) and put in C:/
https://yadi.sk/d/piVn4bpf3MqcHC
2) download : FlashOne1,9 , put in a folder and extract it ,
https://yadi.sk/d/PmVChpqZ3Mj2hz
3) download :fastboot rom
https://yadi.sk/d/uzdwFhie3MqcJs
4)download qq driver
https://yadi.sk/d/U4SIDH3B3Mixsh
run "FlashOne1,9"
How to qfil Flash
When select qfil flash type, press power key, volume up and volume down key at the same time, then the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press ‘Refresh’ button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.
Select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool can’t get hardware information, you should check if the software and hardware is matching yourself.)
Press ‘Flash’ button, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, ‘Decompression folder is exist, re-decompress or not?’ dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress(for me the bar not move stuck %1 i did wait 15minute then unplug phone and push power button long time, and at the same time, the flashing log will also be shown on UI.
After flash complete or error happened, a notification dialog will pop up.
after phone start go boot logo and wait by the way open fastboot rom and push le_zl1_fastboot
everyting go fine u get 24gb for 32gb phone and 54gb for 64gb phone
good luck i hope help you
Thanks
Work on x720 ...
Will this work on Custom OMNI rom please?
krugerbud said:
Will this work on Custom OMNI rom please?
Click to expand...
Click to collapse
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
lazye53 said:
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
Click to expand...
Click to collapse
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
krugerbud said:
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
Click to expand...
Click to collapse
This issue is only for those who are missing storage.
If you have another storage problem, look for another solution.
Storage Problem LeEco Le Pro 3 X720 - 4 GB/32 GB
I followed instructions but it didn't work.
What can I do in order to increase storage to 24 GB?
qfil mode error
Is it for restoring the original storge capacity for Le Pro 3? The reason why I'm asking this is becuase I am currently stuck on qufil rom because it keeps making error everytime I tried to go to the launcher. Will it work on my circumstance?
查看中文版教程 (Chinese version)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To moderators: This phone originally had Windows 10 Mobile installed, so I posted it here. Please move it if topic is unsuitable in Windows 10 Mobile forum.
Code:
#/usr/bin/env python3
print('''
Your warranty is... still valid?
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
''')
First of all, thanks to pst125675 for testing Android dump on HP Elite x3 Retail unit. So far I can say converting HP Elite x3 into Android is completely possible - although there're some known issues.
To download HP Elite x3 Android dump, visit here:
https://forum.xda-developers.com/t/not-guide-android-dump-of-hp-elite-x3-for-future-use.4558603/
Known issues- IMEI will be erased. I don't know how to fix it for now, but you can make telephone call properly if your country/region's regulation doesn't require a proper IMEI value.
Known unaffected countries/regions: China, Russia.
- Unable to use fingerprint sensor, IR sensor.
- Difficult to revert it back to Windows 10 Mobile. Guess you don't want to revert it back anyway.
Applicable modelHP Elite x3 Open Market variant, both retail and prototype unit can be used.
Telstra and Verizon variants might be supported (same RKH), but they're untested - do it at your own risk!
DO NOT TRY IT ON OTHER WP MODELS!
Procedure for Retail Unit1. Disable Reset Protection (if applicable) in settings and downgrade the phone back to initial release (10.0.14393.953) with Windows Device Recovery Tool or FFUTool. If your phone is locked out from Reset Protection, there're some methods to bypass it which aren't covered here.
2. At this point, do not connect to Internet during the entire procedure. Enable Developer Mode and install Interop Tools, install NDTKSvc then enable Interop Unlock here. If you were always trying to hack your HP Elite x3 then I'm sure you've already known how to enable Interop Unlock.
https://forum.xda-developers.com/t/...es-now-on-github.3445271/page-7#post-68463839
3. Copy attached registry file to the phone, disconnect the phone and import it with Interop Tools. After that reconnect it to your phone.
4. Connect your phone back to PC, and browse to EFIESP folder\Windows\system32\boot, locate resetphone.efi file and rename it to resetphonex.efi.
5. Download the debugprod package from here: https://gus33000.me/2019/01/05/secureboot-flaw-for-all-wp-devices-literally/ and extract developermenu.efi from it, rename it to resetphone.efi and copy it to EFIESP folder\Windows\system32\boot of your phone.
6. Power off the phone and press both vol- and power key to get Windows Phone Boot Menu. Use power key to select Mass Storage mode.
7. Connect the phone to PC. You can use something to backup entire eMMC before doing any further, like HxD from https://mh-nexus.de/en/downloads.php?product=HxD20 or dd. Open disk with read-only mode (choose MSFTPhone eMMC) and find somewhere with at least 58.2GB storage space.
8. You may want to backup QCN before installing Android (in case you want to restore IMEI). This part will be mentioned in replies.
9. Now use Rufus ( https://rufus.ie/ ) to install the extracted Android dump to your phone. You'll have to tick "List USB Hard Drives" so your phone will be listed in Rufus. When you're ready, click START button to start Android installation.
WARNING: BE CAREFUL! DO NOT DISCONNECT THE PHONE DURING THE PROCEDURE, OR IT WILL KILL YOUR PHONE AND NO WAY TO REVIVE! IF YOU ARE USING A LAPTOP TO FLASH YOUR PHONE, MAKE SURE YOU HAVE SLEEP DISABLED AND KEEP EXTERNAL AC ADAPTER CONNECTED!
10. Now wait 1-3 hours for the procedure completes. Once the procedure completes, force reboot the phone.
11. Your phone will boot into Android. You may see an error message in Chinese that told you decryption failed. Simply tap the button "恢复出厂设置" to perform factory reset.
12. Enjoy Android OS on your glorious HP Elite x3.
Procedure for Prototype Unit
If you're not sure if you have a prototype unit, check if your phone meets any of following conditions:
- HP Sample, Not for Sale is printed on the back
- You can see Not for Resale text displayed during boot
- No fingerprint sensor and a more generally known HP logo is used
If your phone doesn't meet any of conditions above, then your phone isn't a prototype unit. This part is not for you.
Simply follow this guide to put your phone into EDL mode, use any Snapdragon 820 eMMC firehose programmer to backup/restore the entire phone. The prototype variant allows you to revert it back to Windows Phone variant whenever you want.
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com
Special Thanksgus33000 and Rafael Rivera for discovering the production signed Developer Menu and Interop Tools development
My partner for discovering the existence of HP Elite x3 prototype with Android OS
pst125675 for his first trial and error procedure
Bootloader Unlock
It's possible to unlock the bootloader after installing Android. However since I cannot find Fastboot driver that completely suitable for HP Android devices, you'll have to force install Fastboot driver for other OEMs on it.
Once Fastboot driver installed, the bootloader unlock procedure will be pretty generic. Simply enable OEM Unlocking in Developer Options, reboot to Fastboot mode and execute this command, then confirm bootloader unlock:
Code:
fastboot flashing unlock
It's also possible to install Magisk root on this phone, simply use 7-Zip to open Android dump and extract boot.img inside, then patch it with Magisk.
Backup QCN
This procedure can be only done before you convert it to Android.
To enable diag port, you'll have to download attached diagnostic.rar , boot the phone into Mass Storage mode and execute this command under Administrator privilege. Assume your MainOS drive is mounted at drive G.
Code:
enableQCComp.bat G:\ SerialCompositeConfig
EnableMSFTStack.bat G:\ SerialCompositeConfig
Once 2 commands were executed successfully, reboot it back to normal OS and make QCN backup with QPST.
How about revert it back to Windows 10 Mobile?You'll need to build a TWRP, which obviously isn't available. Or at least enable Rooted ADB Shell under stock recovery.
I'm sure developers are talented enough to modify boot/recovery images to have it enabled.
hikari_calyx said:
you'll have to force install Fastboot driver for other OEMs on it.
Click to expand...
Click to collapse
first of all, many many thanks for the support in bringing our wonderful HP back to life, by providing all the files.
Can you also please guide me in the right direction on where to find/how to install fastboot driver? Is it needed on Ubuntu too?
a_petrov303 said:
first of all, many many thanks for the support in bringing our wonderful HP back to life, by providing all the files.
Can you also please guide me in the right direction on where to find/how to install fastboot driver? Is it needed on Ubuntu too?
Click to expand...
Click to collapse
For Windows, right click on Update Driver, Select Driver manually, and choose All Devices, select any generic Fastboot driver you have installed.
Fastboot driver installation is unneeded for Linux distro or macOS.
A known working driver is the Google driver provided on Google website: https://developer.android.com/studio/run/win-usb
Many thanks for your reply. I am struggling to enter fast boot mode.
adb reboot fastboot is not working, only adb reboot bootloader. Then I get the same menu as with "Vol - + Power" buttons combination :
START
Restart Bootloader
Recovery mode
Power Off
Boot to FFBM
Can you please explain how you got into fastboot mode in order to execute fastboot flashing unlock? I have already extracted boot.img from the dump, many thanks
a_petrov303 said:
Many thanks for your reply. I am struggling to enter fast boot mode.
adb reboot fastboot is not working, only adb reboot bootloader. Then I get the same menu as with "Vol - + Power" buttons combination :
START
Restart Bootloader
Recovery mode
Power Off
Boot to FFBM
Can you please explain how you got into fastboot mode in order to execute fastboot flashing unlock? I have already extracted boot.img from the dump, many thanks
Click to expand...
Click to collapse
You've already entered Fastboot mode.
Simply connect your phone to PC under this screen.
hikari_calyx said:
You've already entered Fastboot mode.
Simply connect your phone to PC under this screen.
Click to expand...
Click to collapse
I think I have tried that, but the phone was simply invisible to the computer.
Fastboot devices command was returning zero devices, but before that adb reboot recovery was working thus restarting the phone into this mode (fastboot mode).
a_petrov303 said:
I think I have tried that, but the phone was simply invisible to the computer.
Fastboot devices command was returning zero devices, but before that adb reboot recovery was working thus restarting the phone into this mode (fastboot mode).
Click to expand...
Click to collapse
Provide a screenshot of Device Manager.
Also, do not use Minimal ADB and Fastboot.
hikari_calyx said:
Provide a screenshot of Device Manager.
Also, do not use Minimal ADB and Fastboot.
Click to expand...
Click to collapse
thank you for your help, I think I understand what I was doing wrong - the fastboot command has to be entered via sudo (In Ubuntu)
How I will try root via magisk, if there is tutorial on that, please share
also, I was thinking, how realistic is to have a working TWRP for our phone and maybe some custom ROMs? Is it too much to hope for this model? )))
apetrov1x5 said:
also, I was thinking, how realistic is to have a working TWRP for our phone and maybe some custom ROMs? Is it too much to hope for this model? )))
Click to expand...
Click to collapse
I made a barely working TWRP based on existing ZUK Z2 TWRP.
I said "barely working", which means only ADB commands will work, you can't touch the screen at all. Also it exceeded 64MB so you can't flash it right into your phone, you can only boot into it with "fastboot boot twrp.img".
I'm not ready to post this to public.
Does it allow to work with hp lapdock (screen+keyboard accessory for the x3) from this android fw?
apg1983 said:
Does it allow to work with hp lapdock (screen+keyboard accessory for the x3) from this android fw?
Click to expand...
Click to collapse
Yes it does, you'll get a totally different experience.
hikari_calyx said:
only ADB commands will work, you can't touch the screen at all
Click to expand...
Click to collapse
hikari_calyx said:
查看中文版教程 (Chinese version)
View attachment 5864361
To moderators: This phone originally had Windows 10 Mobile installed, so I posted it here. Please move it if topic is unsuitable in Windows 10 Mobile forum.
Code:
#/usr/bin/env python3
print('''
Your warranty is... still valid?
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
''')
First of all, thanks to pst125675 for testing Android dump on HP Elite x3 Retail unit. So far I can say converting HP Elite x3 into Android is completely possible - although there're some known issues.
To download HP Elite x3 Android dump, visit here:
https://forum.xda-developers.com/t/not-guide-android-dump-of-hp-elite-x3-for-future-use.4558603/
Known issues- IMEI will be erased. I don't know how to fix it for now, but you can make telephone call properly if your country/region's regulation doesn't require a proper IMEI value.
Known unaffected countries/regions: China, Russia.
- Unable to use fingerprint sensor, IR sensor.
- Difficult to revert it back to Windows 10 Mobile. Guess you don't want to revert it back anyway.
Applicable modelHP Elite x3 Open Market variant, both retail and prototype unit can be used.
Telstra and Verizon variants might be supported (same RKH), but they're untested - do it at your own risk!
DO NOT TRY IT ON OTHER WP MODELS!
Procedure for Retail Unit1. Disable Reset Protection (if applicable) in settings and downgrade the phone back to initial release (10.0.14393.953) with Windows Device Recovery Tool or FFUTool. If your phone is locked out from Reset Protection, there're some methods to bypass it which aren't covered here.
2. At this point, do not connect to Internet during the entire procedure. Enable Developer Mode and install Interop Tools, install NDTKSvc then enable Interop Unlock here. If you were always trying to hack your HP Elite x3 then I'm sure you've already known how to enable Interop Unlock.
https://forum.xda-developers.com/t/...es-now-on-github.3445271/page-7#post-68463839
3. Copy attached registry file to the phone, disconnect the phone and import it with Interop Tools. After that reconnect it to your phone.
4. Connect your phone back to PC, and browse to EFIESP folder\Windows\system32\boot, locate resetphone.efi file and rename it to resetphonex.efi.
5. Download the debugprod package from here: https://gus33000.me/2019/01/05/secureboot-flaw-for-all-wp-devices-literally/ and extract developermenu.efi from it, rename it to resetphone.efi and copy it to EFIESP folder\Windows\system32\boot of your phone.
6. Power off the phone and press both vol- and power key to get Windows Phone Boot Menu. Use power key to select Mass Storage mode.
7. Connect the phone to PC. You can use something to backup entire eMMC before doing any further, like HxD from https://mh-nexus.de/en/downloads.php?product=HxD20 or dd. Open disk with read-only mode (choose MSFTPhone eMMC) and find somewhere with at least 58.2GB storage space.
8. You may want to backup QCN before installing Android (in case you want to restore IMEI). This part will be mentioned in replies.
9. Now use Rufus ( https://rufus.ie/ ) to install the extracted Android dump to your phone. You'll have to tick "List USB Hard Drives" so your phone will be listed in Rufus. When you're ready, click START button to start Android installation.
WARNING: BE CAREFUL! DO NOT DISCONNECT THE PHONE DURING THE PROCEDURE, OR IT WILL KILL YOUR PHONE AND NO WAY TO REVIVE! IF YOU ARE USING A LAPTOP TO FLASH YOUR PHONE, MAKE SURE YOU HAVE SLEEP DISABLED AND KEEP EXTERNAL AC ADAPTER CONNECTED!
10. Now wait 1-3 hours for the procedure completes. Once the procedure completes, force reboot the phone.
11. Your phone will boot into Android. You may see an error message in Chinese that told you decryption failed. Simply tap the button "恢复出厂设置" to perform factory reset.
12. Enjoy Android OS on your glorious HP Elite x3.
Procedure for Prototype Unit
If you're not sure if you have a prototype unit, check if your phone meets any of following conditions:
- HP Sample, Not for Sale is printed on the back
- You can see Not for Resale text displayed during boot
- No fingerprint sensor and a more generally known HP logo is used
If your phone doesn't meet any of conditions above, then your phone isn't a prototype unit. This part is not for you.
Simply follow this guide to put your phone into EDL mode, use any Snapdragon 820 eMMC firehose programmer to backup/restore the entire phone. The prototype variant allows you to revert it back to Windows Phone variant whenever you want.
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com
Special Thanksgus33000 and Rafael Rivera for discovering the production signed Developer Menu and Interop Tools development
My partner for discovering the existence of HP Elite x3 prototype with Android OS
pst125675 for his first trial and error procedure
Click to expand...
Click to collapse
First of all, thank you for making a guide on how to install android to the Elite x3.
I've got a problem, after changing the registry files of the windows phone (step 3), the phone doesn't show on my computer. Am I missing something or doing something wrong?
luaadev said:
I've got a problem, after changing the registry files
Click to expand...
Click to collapse
How do u mean registry files,it is only one .reg file in rar.Try another cable,or interop tools installation gone wrong,at last try reseting win...
Is it only me or camera can't focus? And battery is draining somehow fast
kew1701 said:
Is it only me or camera can't focus? And battery is draining somehow fast
Click to expand...
Click to collapse
Yeah, battery drains faster than on W10M. And autofocus works fine, it's not an issue with your phone. You just bad at aiming
bebrahero228 said:
You just bad at aiming
Click to expand...
Click to collapse
anyway,thank authors for a hard work,i though it will never be android on x3,but "three years ljejter" ,they done it...
hikari_calyx said:
查看中文版教程 (Chinese version)
View attachment 5864361
To moderators: This phone originally had Windows 10 Mobile installed, so I posted it here. Please move it if topic is unsuitable in Windows 10 Mobile forum.
Code:
#/usr/bin/env python3
print('''
Your warranty is... still valid?
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
''')
First of all, thanks to pst125675 for testing Android dump on HP Elite x3 Retail unit. So far I can say converting HP Elite x3 into Android is completely possible - although there're some known issues.
To download HP Elite x3 Android dump, visit here:
https://forum.xda-developers.com/t/not-guide-android-dump-of-hp-elite-x3-for-future-use.4558603/
Known issues- IMEI will be erased. I don't know how to fix it for now, but you can make telephone call properly if your country/region's regulation doesn't require a proper IMEI value.
Known unaffected countries/regions: China, Russia.
- Unable to use fingerprint sensor, IR sensor.
- Difficult to revert it back to Windows 10 Mobile. Guess you don't want to revert it back anyway.
Applicable modelHP Elite x3 Open Market variant, both retail and prototype unit can be used.
Telstra and Verizon variants might be supported (same RKH), but they're untested - do it at your own risk!
DO NOT TRY IT ON OTHER WP MODELS!
Procedure for Retail Unit1. Disable Reset Protection (if applicable) in settings and downgrade the phone back to initial release (10.0.14393.953) with Windows Device Recovery Tool or FFUTool. If your phone is locked out from Reset Protection, there're some methods to bypass it which aren't covered here.
2. At this point, do not connect to Internet during the entire procedure. Enable Developer Mode and install Interop Tools, install NDTKSvc then enable Interop Unlock here. If you were always trying to hack your HP Elite x3 then I'm sure you've already known how to enable Interop Unlock.
https://forum.xda-developers.com/t/...es-now-on-github.3445271/page-7#post-68463839
3. Copy attached registry file to the phone, disconnect the phone and import it with Interop Tools. After that reconnect it to your phone.
4. Connect your phone back to PC, and browse to EFIESP folder\Windows\system32\boot, locate resetphone.efi file and rename it to resetphonex.efi.
5. Download the debugprod package from here: https://gus33000.me/2019/01/05/secureboot-flaw-for-all-wp-devices-literally/ and extract developermenu.efi from it, rename it to resetphone.efi and copy it to EFIESP folder\Windows\system32\boot of your phone.
6. Power off the phone and press both vol- and power key to get Windows Phone Boot Menu. Use power key to select Mass Storage mode.
7. Connect the phone to PC. You can use something to backup entire eMMC before doing any further, like HxD from https://mh-nexus.de/en/downloads.php?product=HxD20 or dd. Open disk with read-only mode (choose MSFTPhone eMMC) and find somewhere with at least 58.2GB storage space.
8. You may want to backup QCN before installing Android (in case you want to restore IMEI). This part will be mentioned in replies.
9. Now use Rufus ( https://rufus.ie/ ) to install the extracted Android dump to your phone. You'll have to tick "List USB Hard Drives" so your phone will be listed in Rufus. When you're ready, click START button to start Android installation.
WARNING: BE CAREFUL! DO NOT DISCONNECT THE PHONE DURING THE PROCEDURE, OR IT WILL KILL YOUR PHONE AND NO WAY TO REVIVE! IF YOU ARE USING A LAPTOP TO FLASH YOUR PHONE, MAKE SURE YOU HAVE SLEEP DISABLED AND KEEP EXTERNAL AC ADAPTER CONNECTED!
10. Now wait 1-3 hours for the procedure completes. Once the procedure completes, force reboot the phone.
11. Your phone will boot into Android. You may see an error message in Chinese that told you decryption failed. Simply tap the button "恢复出厂设置" to perform factory reset.
12. Enjoy Android OS on your glorious HP Elite x3.
Procedure for Prototype Unit
If you're not sure if you have a prototype unit, check if your phone meets any of following conditions:
- HP Sample, Not for Sale is printed on the back
- You can see Not for Resale text displayed during boot
- No fingerprint sensor and a more generally known HP logo is used
If your phone doesn't meet any of conditions above, then your phone isn't a prototype unit. This part is not for you.
Simply follow this guide to put your phone into EDL mode, use any Snapdragon 820 eMMC firehose programmer to backup/restore the entire phone. The prototype variant allows you to revert it back to Windows Phone variant whenever you want.
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com
Special Thanksgus33000 and Rafael Rivera for discovering the production signed Developer Menu and Interop Tools development
My partner for discovering the existence of HP Elite x3 prototype with Android OS
pst125675 for his first trial and error procedure
Click to expand...
Click to collapse
were is the file in 4 step ??