Hey everyone !
I've looked around and can't seem to find the stock Rogers KDZ file. DevTester.ro seems to have it but the download isn't working, even by changing the web adress (As noted on the website). I'm trying to upgrade from LP to MM (Received the notification this morning) but the upgrade tells me I am rooted so I can't do it.
Having the same issue as you - can't find an old kdz to roll back to!
https://mega.nz/#!XFo0AZ7Z!OiTjfU8kmyM4eECFwO7r_du6kIRGlSGk_PlZKE9GqLw
Rogers h812 version 20E
Related
LG G3 cat6 F460k model. hi guys. I just received a brand new F460k and i am not able to update it to lollipop. When i go into update center and then phone version update, after clicking on check now for update, it gives me an error "update service is limited. Please contact lg service center". I am currently downloading the lg pc suite. I have attached the software information. Also, I put up in India and I don't know whether that's the problem as my G3 is Korean variant.
Also lg pc suite, but it gives this error "cannot run upgrade. Check phone status and retry". Is something wrong with my device?
Can I flash F460k lollipop kdz manually using download mode
But if I do so
These are all LG Korean refurbished phones.. But they don't support it and not licensed to sell in korea. That's why e-commerce sites selling these phones with deep discount. But I wonder can I able to flash lollipop kdz file manually. If I do so will it affect SIM lock or SIM network read issue?
It's going to download mode when pressing volume up button while turning on and I downloaded lollipop kdz for f460k. Can I go-ahead and flash it. Or it will give boot up or hard brick. It isolleh . Thank you.
Flashed F460k v20c kdz lollipop everything fine and i rooted using one click root.Is there any custom rom available for lollipop as of now. Or i will downgrade to kitKat by flashing kdz and root and recovery andis there any lollipop custom rom available from stock kitkat. And by the way still automatic download not working same error when checking for new updates. Planning to go back to kitkat stock and install any custom lollipop rom available.. Olleh is having annoying bloatwares in korean language to get rid only i need to go custom rom.
I purchased a used Verizon LG G3 from someone online. It has Verizon all over the device; however, whenever I turned it on, US Cellular popped up on the screen. The guy told me all I had to do was call Verizon and they would activate the phone.
I contacted Verizon, and they said there was nothing they could do. I talked to a friend of mine and he said that it looked like they flashed the phone with a US Cellular firmware as the device is a VS985 but it is showing up as US990 on the firmware. I have tried flashing it back to a stock firmware of Verizon using the FlashLG Tool and stock *.tot file to which it fails and just says device model is different.
My question is, is there anything I can do to fix this or is this phone basically a paper weight?
I'm kind of new to this, so any help would be appreciated.
Thank you
Try flashing 24b using the KDZ method...
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
http://forum.xda-developers.com/showthread.php?t=2785089
... w/ the file located here:
http://storagecow.eu/index.php?dir=Xda%2FLG+G3%2FStock%2FVerizon+VS985%2F
Flash KDZ to Sprint Variant
Long story short is I had a lot of problems with rooted sprint and ended up having to flash the verizon KDZ on it. This fixed all my problems but obviously I can't use it with sprint service now. Anyway I don't care about that but I am curious since I will still use my G4 as a media device until some method to restore sprint software comes around (if ever).
Can I flash any of the other KDZ files on my phone too? Or only US variant kdz will work?
I have LG G4 815 SEA with 10b
Can install EUR firmware like 10c or 10d ?
Or should I wait for OTA update
Thanx
please any one can help?
I have the exact same concern as you, due to the 10C-SEA-XX has ****ty battery life (or maybe it's just the phone...?)
I think it should be fine, but i'm not using a PC right now so i can't go through with the KDZ flashing steps.
Yes, It can be
like me, H815T-HKG 10b can flash to H815-EUR 10c
but I show up a warning about the cust is not the correct region
I am going to find a way to fix it (cuz I saw some rom can remove the cust warning
and it lost my volte and 4G+ function
thanx all , i flashed 10d-OPT2 and it is great , finally my touch work fine
Hello,
I am the owner of K10 2017 M250N, however LG Bridge say's that it is M250E. I have tried flashing the firmware with the use of few applications such as LG UP, LGFlashTools both versions 2014, 2016. and LG Bridge.
All those methods have failed I have even tried to change the kdz files while the LG Bridge was downloading the official firmware for my phone, however I DON'T WANT IT AS IT HAS A LOT OF BLOATWARE.. As the LG Bridge never had a problem with installing the firmware I couldn't replace the KDZ even when I changed it name to the official one.
My question is, is there a way to flash different KDZ from the same phone, region etc ??
All help is appricated,
Thank you.
whitearmor said:
Hello,
I am the owner of K10 2017 M250N, however LG Bridge say's that it is M250E. I have tried flashing the firmware with the use of few applications such as LG UP, LGFlashTools both versions 2014, 2016. and LG Bridge.
All those methods have failed I have even tried to change the kdz files while the LG Bridge was downloading the official firmware for my phone, however I DON'T WANT IT AS IT HAS A LOT OF BLOATWARE.. As the LG Bridge never had a problem with installing the firmware I couldn't replace the KDZ even when I changed it name to the official one.
My question is, is there a way to flash different KDZ from the same phone, region etc ??
All help is appricated,
Thank you.
Click to expand...
Click to collapse
I have managed to fix this.
here you can find the resoultion for the bloatware from your operator, all you need is a clean firmware.
https://forum.xda-developers.com/lg-k10/help/lg-k10-lgm250n-rooting-t3744736