Ambient mode brighter than when watch is actually on? - Huawei Watch

For some weird reason, my ambient mode goes brighter than when my watch is active (when I use it). I want to lower the ambient brightness... Anyway to do that?
By the way I'm using watch maker premium, and it does it for every single watch face....

Figured it out... It was due to an app called "advanced settings" and how it manages the screen saver brightness...

Related

[Q] Battery life w/ Auto Brightness On vs. Off

I have Ambient Mode set to off which has been stated to save battery life. I was also wondering if anyone has noticed a difference in battery life while having auto brightness turned on vs off?
ericdmiller said:
I have Ambient Mode set to off which has been stated to save battery life. I was also wondering if anyone has noticed a difference in battery life while having auto brightness turned on vs off?
Click to expand...
Click to collapse
I am going with both ambient screen on and ambient mode on today. Yesterday I had both off and had ~6.3% per hour decrease using it. Today with both on, 10hrs into my day it's ~7.2% per hour discharge. I got about as much calls and texts and emails and disconnects when I walk up front or other side of the building in my office.
So far ~.9% difference with both ambient screen and ambient mode on. I'll test with ambient screen on and ambient mode on the watch to level 1 to see if there's any difference tomorrow.
kpjimmy said:
I am going with both ambient screen on and ambient mode on today. Yesterday I had both off and had ~6.3% per hour decrease using it. Today with both on, 10hrs into my day it's ~7.2% per hour discharge. I got about as much calls and texts and emails and disconnects when I walk up front or other side of the building in my office.
So far ~.9% difference with both ambient screen and ambient mode on. I'll test with ambient screen on and ambient mode on the watch to level 1 to see if there's any difference tomorrow.
Click to expand...
Click to collapse
What's the difference between ambient mode and auto brightness mode? Ambient mode just keeps the display on most of the time?
ericdmiller said:
What's the difference between ambient mode and auto brightness mode? Ambient mode just keeps the display on most of the time?
Click to expand...
Click to collapse
Ambient mode is what I refer to is the setting on the watch for auto brightness. When the watch is awake, the watch determines on how bright the display should be according to the light sensor on the watch. I normally turn my brightness to level one on my g watch and I lasted 14 hrs easy.
kpjimmy said:
Ambient mode is what I refer to is the setting on the watch for auto brightness. When the watch is awake, the watch determines on how bright the display should be according to the light sensor on the watch. I normally turn my brightness to level one on my g watch and I lasted 14 hrs easy.
Click to expand...
Click to collapse
Are you aware there's an Auto Brightness setting as well? Trying to determine what the difference is between the two.
ericdmiller said:
Are you aware there's an Auto Brightness setting as well? Trying to determine what the difference is between the two.
Click to expand...
Click to collapse
The term "ambient setting" on the phone? That's pretty much the same as the "screen on" setting when I had the g watch. Actually it was actually the same setting on the Moto prior to updating to 4.4w.1.
The "auto brightness" is the where the light sensor on the watch is used. The difference is that the autobrightness will use the sensor where if you choose one of the other levels, from my understanding, will then not use the light sensor and the "Ambient" setting is just another fancy way of saying dimmed rather than off.

Auto brightness show and inconsistent - really bright at night

I set my watch to use auto brightness. In a dark location, like movie theater or dark room, the auto brightness is not working properly:
- when I receive notification, the watch screen turned on at the full brightness. After about 2 seconds, then it either turn off the screen or the brightness reduced.
- when I wake up the watch manually, same thing happen.
Anyone experiencing this?
I usually see the opposite, where in a dark room, it comes on so dim that I can 't even see it, then brightens after a couple seconds. However, your general point is right on... the auto-brightness definitely needs some improvement.
Hmmm...That's interesting.
Really tick me off when I just woke up and the bright screen blast my eye. I am using the watch with sleep android app, but I think I'll forgo that.
Auto brightness in dark situation for me is terrible. It is even dime than level 1 brightness. I can only see time, but can not read notification clearly. I change to level 1 setting, it is great. And save lots of battery as well.
Moto 360 Brightness
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.

Auto brightness is useless!

In a 100% dark area (movie theater, etc.), when I flick my wrist to turn on the watch, it turned on with full brightness on. It stay there indefinitely... sometimes it'll go away by itself, other time I have to do something, like swiping cards before the screen will go dim.
In a semi (50% dark), the screen will not turn on to its full brightness, but at... dim. WTH?!
Stick watch face?
I've noticed this as well (when driving at night). Since it turns on all the time (I steer with the same hand I wear my watch on), I've noticed lots of strange behavior. Sometimes it turns on very bright, and then goes back to sleep. Sometimes it turns on bright and then dims to the minimal brightness that it should be. Sometimes it turns on with the appropriate, minimum brightness. There seems to be no rhyme or reason to it. I'm running a stock watch face, and have very few apps installed.
As someone offered up 'muting' the watch while driving in another thread as a possible solution, it doesn't help me. Whether or not the watch is muted, it still wakes up all the time, and varying brightness levels.
bruceo said:
Stick watch face?
Click to expand...
Click to collapse
Emm...you mean stock watch face? If yes, I am using the classic one.
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
v3ngence said:
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
Click to expand...
Click to collapse
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
pakure said:
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
^^This...well probably not locked
I did a little thread cleaning to remove the off topic arguments about using a device (phone or watch) in a movie theatre. There were a lot of people who quoted these posts, and unfortunately I had to remove these posts as well...sorry for that.
Here is the thing, this thread is about the buggy behavior of the watch waking up at full brightness. It doesn't matter if it is in a theatre, whilst driving the car, or you just woke up in the middle of the night and want to check the time. More that one person has reported the issue and there has been a proposed fix...please keep the thread focused on finding the root causes, fixes, work arounds, etc. No matter what, please knock off the name calling, that will only get you into trouble!
Thanks!:good:
lanwarrior said:
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Click to expand...
Click to collapse
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
v3ngence said:
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
Click to expand...
Click to collapse
Interesting. So with ambient ON, it still turn on at full brightness but momentarily. I'll test this and will report back.
Well, I'm having the opposite problem following the last update.
it frequently (at work right now, for example) comes up EXTREMELY dim, I'd guess maybe 5x dimmer than brightness setting '1'.
I'm setting it to '1' as a workaround for now.
- Frank
Wait for the next 5.0 update. .there's options like theater mode. ..and other brightness modes coming to wear
Sent from my SM-N910C using Tapatalk 2
Smart Brightness for Moto 360
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Instant buy. Thanks allot, that makes in combination with the 5.0 update, Watchmaker and Bubble Cloud Launcher my watch perfect.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Smart Brightness for Moto 360
TheGoD said:
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Click to expand...
Click to collapse
The application really works. If you want see how works, do the followings steps:
1. open Smart Brightness App
2. Turn on the application
3. Set the minimum brightness to 20%
4. Turn on the auto brightness.
5. Go to a dark room and wait until Moto360 to turn off the screen.
6. Touch the screen to wakeup the screen. (This is necessary because the Smart Brightness application start when the screen is on and stop when the screen is off).
You will see a clear image after this steps. Now go to the smart brightness app and turn it off (Using the on/off switch located at the top of the screen). Repeat the steps 5 and 6. Now the screen will look dark, because it is the factory auto brightness.
I recommend to use the 7 days trial. After 7 days after using it you will notice the difference.
I'm using this app over a month and works fine. Please let me know any other concern about the application.
For me its not the low light the problem as this works, is outside doens't go bright enough in direct sunlight
Enviado do meu HTC One através de Tapatalk
no problems
i have always used it, never experienced any problems
Moto 360 on the second generation does not work
Fabio

Do you manually change brightness a lot?

With most Android Wear watches lacking an ambient light sensor, this Huawei one included, I'm wondering if you often have to manually adjust brightness, either not to be blinded at night, or to actually see the screen in daylight.
As far as I understand, an awake watch will get brighter, and ambient mode will be darker. There's also the double and triple crown clicks for theater (screen off) and sunlight (brighter) modes. And things like Display Brightness for Wear, or through AutoWear for finer grained and somewhat automated results.
And that's what I'm really wondering: if I can get a satisfying custom behaviour through AutoWear, by slices of day time (eg, brightest at noon, and progressively darker as night approaches), that'd be fine enough to me. But if I constantly have to adjust things manually, I fear that would quickly become annoying (I can spend a lot of energy tweaking automation to ensure I can be as lazy as can be afterwards ).
Do you choose a middle ground brightness setting and are fine with it most of the time, except when you rarely have to double or triple crown click? Do you find yourself manually adjusting brightness a few times a day? Do you constantly fiddle with brightness settings?
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
I missed it greatly from my urbane, so I went back to it.
suzook said:
I missed it greatly from my urbane, so I went back to it.
Click to expand...
Click to collapse
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
noraef said:
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
Click to expand...
Click to collapse
UH! Yeah it does! Its by the lugs.
suzook said:
by the lugs
Click to expand...
Click to collapse
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Crown
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
gaikokujin said:
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
Click to expand...
Click to collapse
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
atoy74 said:
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I see, thanks.
I don't change it often at all. Most of the time 2 or 3 has been plenty bright for me, and the triple click to up it a bit works pretty well...
noraef said:
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Click to expand...
Click to collapse
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Under direct sunlight, it's not always that easy to see even with the bright 3-click sunlight mode. But generally, twisting my wrist a little to avoid direct reflections, or at worst covering it a bit with my other hand, is enough.
noraef said:
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Click to expand...
Click to collapse
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
agentdr8 said:
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
Click to expand...
Click to collapse
Does that setting only apply to the actual watch face, or to the whole display? I've managed to make it dimmer with a partially transparent black layer in WatchMaker, but it doesn't apply to cards previews, or icons such as mute...
SWapp True Dark allows for actually adjusting the brightness of the whole ambient display, which is already great, but I'd rather have that manageable through Tasker (to have it auto adjust by time of the day). Have asked João if this could be implemented in AutoWear, so maybe it'll end up manageable through that.
Seems quite crazy to me this setting is not available by default. Reminds me, even though I think Android is the best OS of its kind, how lame I find it without the truckload of customization I lay over it...
I have 8 days ago my Huawei SW. It's my first SmartWatch and I'm really disappointed not to do anything with Tasker and Android Wear to adjust brightness to my liking clock automatically.
On the day I need more brightness when I'm out and at night the minimum brightness of the screen saver is very strong.
The bothers me most at the moment is so intense brightness of screen saver at night. No achievement make it more tenuous. Anyone know if there is any app that you can do?
Hopefully one of the experts and boys of this site something to be developed further manipulate Androi tasker and wear.
I've been using Display Brightness for Wear. It allows for different brightness settings for day and night in different situations. I wish it was more customizable or there were some ways to control brightness with tasker. Unfortunately, I've been unable to find those.
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
brizey said:
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
Click to expand...
Click to collapse
I {o] [URL]v I they're t5ttpp[emoji12] rr[/URL]way oo{o[oooooo] 599d55t
maximus96 said:
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
Click to expand...
Click to collapse
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
wait...WAT?! i've never known this...btw it doesn't work with Android Wear 2.0 preview 2
I've thought of something somewhat cool but I'm no developer.
What if we can use our cellphone's ambient light sensor to sync with the watch so that the watch can get both bright and/or dim when needed?
Theoretically this will function correctly if your phone isn't in your pocket all the time.
Sent from my SM-G935T using XDA-Developers mobile app

When going into sleep, screen dims, but then lights back up

I've had the watch since tuesday, but am having a problem with it: when going into ambient, screen visibly dims, but ends up lighting back up... Tried several brightness settings, and it does it with all, except maximum brightness (ie 5).
So basically, when going into ambient, the screen progressively dims, but then brights up and ends up settling at the ambient brightness level it should reach when brightness is set at 5.
Have tried several watch faces, and factory resetting, but it doesn't change a thing.
Anyone experiences that?
Also tried setting brightness with Autowear: only the awake brightness is affected- the ambient brightness always stays the same...
For what is worth, it's particularly obvious with the Dandy default watch face, as it's the same in awake and ambient mode (minus the seconds hand). Set this one up, set brightness at 1, get in a low lit room, and then, I for one see the ambient brightness get dimmer, then get visibly brighter and settle there... Not that obvious in a bright room, but blatant in a dark one.
Also, I realized the watch reports the Android Wear version is 1.3.0.2176821 while it's the latest 1.3.0.2284253 on the phone. Same as, the watch reports the Google Play Services version is 8.1.20 (2283517-534) while it is 8.1.15 (2250156230) on the phone. Don't know if it matters...
Just turn on theatre mode when charging.
acp5533 said:
Just turn on theatre mode when charging.
Click to expand...
Click to collapse
That, I already do. But the sun sets long before I go to bed, and lay the watch on the charger. And it's as soon as the sun sets that the watch is much too bright to me in ambient mode...

Categories

Resources