Related
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
I played with Ambient Mode a little before the recent update, but battery life just wasn't sufficient to keep it on. After the update, battery life improved enough for Ambient Mode, so I switched it on. I dealt with it a couple days, then ultimately turned it off for this very reason. It just seemed clunky to me, and as you stated, I'd often glance at my wrist only to see the wrong time until suddenly the watch came fully on and updated.
I was excited for Ambient mode, but like you, I no longer see the point. I'd rather just have a user-controllable setting for "fully on" sensitivity. If I could make my 360 just a little more sensitive to my raising my wrist action, it'd be perfect without Ambient Mode.
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
I've seen the screen update while it was dim. I do think that it is too dim to use outside like you mentioned.
I noticed this as well. Surely just a bug or an issue with android wear that will be fixed at some point. I'm also sure they will provide a lot more features to regulate screen controls, on, off, brightness, etc in future updates. It's just a matter of time.
I look at it this way... the sensor is kind of future proof if anything. Might not be very useful now, but could have a lot of potential in the next few months or once custom ROM's start rolling out.
Android wear is still in the early stages. It can only get better. Just be patient, we are early adopters on first generation hardware.
tlxxxsracer said:
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
Click to expand...
Click to collapse
Here is a way you can set the screen on all the time:
http://forum.xda-developers.com/showthread.php?p=55311726
knoxploration said:
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Just watched mine move the minutes hand just fine in ambient mode... this is with the classic Motorola face.
https://www.youtube.com/watch?v=HsTpDpgYwFY
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
zarks said:
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
Click to expand...
Click to collapse
I thought it would stay on the dimmed mode the whole time too... but like you said it turns on with even the slightest rotation of the wrist now, and that means we can finally glance at the watch and see the time!
:good:
The minuets do update in real time so idk what you're seeing?
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
for me, in ambient mode, the screen still turns off after a while. but it turns back on much quicker than with ambient mode off. it often takes an exaggerated bring-up-arm movement to turn on the screen with ambient off. i used to resort to tapping the screen instead. with ambient on the battery still last me a "work day". off charger at 7AM and dies around 10PM or so...battery lasts longer with stock faces compared to Facer faces...
Most developer purposes.
My ambient mode used to stay on all the time now it turns off the screen..
ws6kid said:
My ambient mode used to stay on all the time now it turns off the screen..
Click to expand...
Click to collapse
I just started using it and noticed the screen stays on if you keep it flat horizontal, but if you turn your wrist past 45 degrees it turns off.
Maybe they added that with the update, did ambient mode used to stay on even when that watch is sideways?
Ambient is so useless for me, the screen is almost off all the time... So frustrating coming from a g watch
RunNgun42 said:
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
Click to expand...
Click to collapse
For me, I believe I have seen my watch 'get stuck' maybe once or twice where the time on the dim screen wasn't the same as I had on my computer. This could just be a difference in the clocks, as whenever I check both my phone and my dim watch together, they are the same. Like RunNgun42 said, I think it might be a thing where the proc is in sleep mode to try and save power and isn't keeping up the time as accurately as it could. Once you shake it though and the screen lights up again, the proc will come out of sleep and maintain more accurate timekeeping.
Isn't there a screen always on option in the android wear app?
And yes ambient mode still turns off when the watch is at an angle consistent with being down at your side or is completely still.
SilentAce07 said:
Isn't there a screen always on option in the android wear app?
Click to expand...
Click to collapse
No, you can't keep the screen on at all times out of the box, but some 3rd party software can do it...
Ambient mode is a lot quicker to wake up and react than non-ambient, it's a lot more accurate (non-ambient often stays off when I turn my arm to look at the time), it's easier to see what time it is, and it acts a lot more like a conventional watch- the display is on when you need it.
Battery drain is not a biggie, I get through the day, every day.
I set my watch to use auto brightness. In a dark location, like movie theater or dark room, the auto brightness is not working properly:
- when I receive notification, the watch screen turned on at the full brightness. After about 2 seconds, then it either turn off the screen or the brightness reduced.
- when I wake up the watch manually, same thing happen.
Anyone experiencing this?
I usually see the opposite, where in a dark room, it comes on so dim that I can 't even see it, then brightens after a couple seconds. However, your general point is right on... the auto-brightness definitely needs some improvement.
Hmmm...That's interesting.
Really tick me off when I just woke up and the bright screen blast my eye. I am using the watch with sleep android app, but I think I'll forgo that.
Auto brightness in dark situation for me is terrible. It is even dime than level 1 brightness. I can only see time, but can not read notification clearly. I change to level 1 setting, it is great. And save lots of battery as well.
Moto 360 Brightness
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
In a 100% dark area (movie theater, etc.), when I flick my wrist to turn on the watch, it turned on with full brightness on. It stay there indefinitely... sometimes it'll go away by itself, other time I have to do something, like swiping cards before the screen will go dim.
In a semi (50% dark), the screen will not turn on to its full brightness, but at... dim. WTH?!
Stick watch face?
I've noticed this as well (when driving at night). Since it turns on all the time (I steer with the same hand I wear my watch on), I've noticed lots of strange behavior. Sometimes it turns on very bright, and then goes back to sleep. Sometimes it turns on bright and then dims to the minimal brightness that it should be. Sometimes it turns on with the appropriate, minimum brightness. There seems to be no rhyme or reason to it. I'm running a stock watch face, and have very few apps installed.
As someone offered up 'muting' the watch while driving in another thread as a possible solution, it doesn't help me. Whether or not the watch is muted, it still wakes up all the time, and varying brightness levels.
bruceo said:
Stick watch face?
Click to expand...
Click to collapse
Emm...you mean stock watch face? If yes, I am using the classic one.
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
v3ngence said:
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
Click to expand...
Click to collapse
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
pakure said:
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
^^This...well probably not locked
I did a little thread cleaning to remove the off topic arguments about using a device (phone or watch) in a movie theatre. There were a lot of people who quoted these posts, and unfortunately I had to remove these posts as well...sorry for that.
Here is the thing, this thread is about the buggy behavior of the watch waking up at full brightness. It doesn't matter if it is in a theatre, whilst driving the car, or you just woke up in the middle of the night and want to check the time. More that one person has reported the issue and there has been a proposed fix...please keep the thread focused on finding the root causes, fixes, work arounds, etc. No matter what, please knock off the name calling, that will only get you into trouble!
Thanks!:good:
lanwarrior said:
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Click to expand...
Click to collapse
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
v3ngence said:
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
Click to expand...
Click to collapse
Interesting. So with ambient ON, it still turn on at full brightness but momentarily. I'll test this and will report back.
Well, I'm having the opposite problem following the last update.
it frequently (at work right now, for example) comes up EXTREMELY dim, I'd guess maybe 5x dimmer than brightness setting '1'.
I'm setting it to '1' as a workaround for now.
- Frank
Wait for the next 5.0 update. .there's options like theater mode. ..and other brightness modes coming to wear
Sent from my SM-N910C using Tapatalk 2
Smart Brightness for Moto 360
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Instant buy. Thanks allot, that makes in combination with the 5.0 update, Watchmaker and Bubble Cloud Launcher my watch perfect.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Smart Brightness for Moto 360
TheGoD said:
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Click to expand...
Click to collapse
The application really works. If you want see how works, do the followings steps:
1. open Smart Brightness App
2. Turn on the application
3. Set the minimum brightness to 20%
4. Turn on the auto brightness.
5. Go to a dark room and wait until Moto360 to turn off the screen.
6. Touch the screen to wakeup the screen. (This is necessary because the Smart Brightness application start when the screen is on and stop when the screen is off).
You will see a clear image after this steps. Now go to the smart brightness app and turn it off (Using the on/off switch located at the top of the screen). Repeat the steps 5 and 6. Now the screen will look dark, because it is the factory auto brightness.
I recommend to use the 7 days trial. After 7 days after using it you will notice the difference.
I'm using this app over a month and works fine. Please let me know any other concern about the application.
For me its not the low light the problem as this works, is outside doens't go bright enough in direct sunlight
Enviado do meu HTC One através de Tapatalk
no problems
i have always used it, never experienced any problems
Moto 360 on the second generation does not work
Fabio
I have auto dimness unchecked, and whenever the brightness is set to over 55%, after unlocking the phone it always auto dims byitself.
Is this normal? no other phone does this. Can this be bypassed somehow? It's jarring when you unlock and see a bright vibrant screen and all of a sudden it dims like 10% or so after 5 seconds.
Phone auto dims when it starts to heat up regardless of your settings.
Otherwise it shouldn't as long as it's not set to auto brightness.
nadram said:
Phone auto dims when it starts to heat up regardless of your settings.
Otherwise it shouldn't as long as it's not set to auto brightness.
Click to expand...
Click to collapse
Ok, but when the phone hasn't been used in 30 minutes, and not "hot" at all, this still happens. This also happened with the G3 as well.
Is there a way to turn this off? This post has over 100 views, can everyone please comment if their screen does the same thing? Are there any solutions?
What carrier/model do you have?
I just tried this on mine, Verizon, 611A software.
With Auto Brightness disabled, set to 40%, I powered off, turned it on, then unlocked. The brightness did not change. Then set it to 100% brightness (Auto still disabled), and did the same thing. Again, the brightness did not change.
I have, however, seen the screen brightness reduced when I'm using Auto Brightness. If I turned it off in a bright area, then unlock it in a dim area, the screen will be bright for a moment, then will turn itself down, presumably based on evaluating the current ambient brightness.
RedOCtobyr said:
What carrier/model do you have?
I just tried this on mine, Verizon, 611A software.
With Auto Brightness disabled, set to 40%, I powered off, turned it on, then unlocked. The brightness did not change. Then set it to 100% brightness (Auto still disabled), and did the same thing. Again, the brightness did not change.
I have, however, seen the screen brightness reduced when I'm using Auto Brightness. If I turned it off in a bright area, then unlock it in a dim area, the screen will be bright for a moment, then will turn itself down, presumably based on evaluating the current ambient brightness.
Click to expand...
Click to collapse
auto brightness is always off. It's the AT&T non rooted stock version. I just tuned brightness to 70%, powered off, powered on, and after unlocking and opening chrome it auto dimmed within 5 seconds.
Does it do it if you don't open Chrome?
I've seen apps make their own brightness adjustments (like a camera app that maxes out the screen brightness when it starts up). I want to say that Chrome (on my last phone) is one of them. Alternately, turn it on, unlock, wait 15 seconds, THEN start Chrome. If it still happens right after Chrome loads, then it's a Chrome phenomenon, not a just-turned-on phenomenon., and at least you can isolate what to chase down.
RedOCtobyr said:
Does it do it if you don't open Chrome?
I've seen apps make their own brightness adjustments (like a camera app that maxes out the screen brightness when it starts up). I want to say that Chrome (on my last phone) is one of them. Alternately, turn it on, unlock, wait 15 seconds, THEN start Chrome. If it still happens right after Chrome loads, then it's a Chrome phenomenon, not a just-turned-on phenomenon., and at least you can isolate what to chase down.
Click to expand...
Click to collapse
Yes it dims even if I don't use chrome. No matter whats on the screen it dims a little after 5 seconds.
TheNamelessMan said:
I have auto dimness unchecked, and whenever the brightness is set to over 55%, after unlocking the phone it always auto dims byitself.
Is this normal? no other phone does this. Can this be bypassed somehow? It's jarring when you unlock and see a bright vibrant screen and all of a sudden it dims like 10% or so after 5 seconds.
Click to expand...
Click to collapse
Download LUX (couple of bucks) set it to manual, 100% brightness on all LUX setting areas and it will bypass LG's lame attempt to hide the fact that they can't make a phone that doesn't suffer severe battery drain and overheating.
Your problem is called High Tempurate Thermal Mitigation (throttling). I depise it but with LUX, I tell the phone what is acceptable to me, not the other way around.
If I wanted to be dictated to like a submissive I'd just get an iphone.
I don't doubt that excess temps can cause the phone to adjust its behavior. But that quickly after turning the screen on? That seems really fast for something to go over-temperature, and for a sensor to also detect it that quickly. You may be 100% right, it's just not something I'd expect to happen that quickly.
This is a serious suggestion, despite how it may sound What if you put the phone in the fridge for 15 minutes or so, then do the same test? Does the screen still dim after 5 seconds? Depending on the humidity level, the phone could start to condense after coming out of a cold environment, so use your best judgement.
For a "safer" test, hold it in front of an air conditioner for a few minutes, with the screen off. Then, still at the A/C, turn the screen on, and see if it immediately dims.
If it suddenly runs for a while before dimming, then I'd agree it's likely temperature-related. If it still behaves the same way, then perhaps it's a different cause.
Either way, Lux sounds like a nice addition to these phones, from everything I've read. I've just been too cheap to try it yet But the rather coarse auto-brightness from LG has me curious.
TheNamelessMan said:
Ok, but when the phone hasn't been used in 30 minutes, and not "hot" at all, this still happens. This also happened with the G3 as well.
Is there a way to turn this off? This post has over 100 views, can everyone please comment if their screen does the same thing? Are there any solutions?
Click to expand...
Click to collapse
Have you tried the cool-down suggestions (fridge, A/C,) ?
Try installing ThermoCF to monitor the battery temperature. I find that when used for GPS (mounted on windshield) the screen will dim with direct sunlight. The temperature is in excess of 120 °F when this happens.
I just left the G4 screen on 50% brightness for about 5 minutes and the temperature remained 98 °F (this is on a wireless charger, next to a warm laptop fan exhaust). I switched to 100% brightness and the battery temperature increased to 100 °F over the next five minutes but no dimming has occurred. After a few more minutes the temperature dropped to 99 °F with the screen remaining at 100% brightness.
Different from your problem but: I turned on the developer options and set the screen to "always-on when charging" and have noticed that the screen dims after some amount of time (I haven't timed, maybe 15 minutes or so). I ended up here because I was looking for a way to change that time and may download the LUX app to do it.
Nice to know I am not the only one having this problem. I use my phone to play Ingress and sucks the battery dry faster than anything. The screen kept going dim as I was charging.
I also have this same issue on my G5. I've tried the Lux, free version, and it still dimmed on its own. I wonder if the paid version will help out my situation?
Sent from my LG-H830 using XDA-Developers mobile app
I like the auto-dim, and my phone seems to accept manual "guidance" as to how I prefer the auto-dim to work.
What I mean is that I can manually bump up the brightness slider (while auto-dim is checked/enabled), and the phone will auto-dim using the brighter setting. Or, I can bump the brightness slider down, and auto-dim will remember that and adjust the brightness.
So it's like you can control the baseline setting for auto-dim by using the brightness slider with auto-dim enabled, and then the phone will auto adjust from that baseline. I play ingress and during the day I bump up the slider, but during the night play I'll decrease the slider and still enjoy auto dim both ways, and preserve the most battery that way.
Aint looked to see if g4 has got it. I know g3 you go into hidden menu. And turn the thermal mitigations on and it stopped the throttle down. Lg has an insanley low throttle down temp.
TheMadScientist420 said:
Aint looked to see if g4 has got it. I know g3 you go into hidden menu. And turn the thermal mitigations on and it stopped the throttle down. Lg has an insanley low throttle down temp.
Click to expand...
Click to collapse
Under what setting is it on the G3 so I can check the G5?
Sent from my LG-H830 using XDA-Developers mobile app
dmarco said:
Under what setting is it on the G3 so I can check the G5?
Sent from my LG-H830 using XDA-Developers mobile app
Click to expand...
Click to collapse
On the g3 and g4 its under main hiden menu. I use shortcutmaster to get to them all. But the g4 the options not there. Im not sure i dont know anything about the g5. Im not interested in it at all. I am selling my g4. So i can get another g3.
Now i know theres an app 3ctoolbox. And in cpu settings you can modify the unclock temps i dont know if it does the screen.
So, the hidden menu in Marshmallow, here it is folks. Where would I be able to find the option to turn off screen dim do to thermal mitigation? Anyone have any ideas?
Sent from my LG-H830 using XDA-Developers mobile app
Mine also started to auto dim with auto brightness off. I have the H812 from Bell . I'm sure that on mine it's the proximity light sensor that is faulty or in the software. Because when i turn on the phone while blocking completely the proximity sensor it doesn't dim anymore. (knock knock doesn't work while sensor is blocked) but problem comes back if i wake up the phone without blocking the sensor. I have tried it many times and it's the same thing over and over.
Calibration in the hidden menu doesn't fix it, Lux and many other brightness apps iv'e tried don't fix the problem lol
I also use lux with cf.lumen
Lux will manage the auto brightness as per your preferences because i found the stock LG screen was about 15% lower than id like in all environments.
Cf.lumen actually changes the colour of the display rather than applying a dumb screen filter on top for night viewing.
The only thing Lux does for me is dim the screen twice since the phone already dims by itself 3-4 seconds after the screen is turned on. I can guaranty it's not an overheating problem, even after 30 minutes in the fridge it does it. I'm tempted to have the proximity sensor changed but will most likely wait for LG to release 6.0.1 to see if it will fix it.
Nougat 7.0 is days away and still no 6.0.1 MM for the G4. Pardon my language but LG really sucks . This is my first and last LG phone
Is anyone having issues with auto brightness, jumping up and down every few seconds? Im currently sat in a dimly lit room with the TV on and my screen keeps changing brightness levels every few seconds, if I pull down the notification area I can see the slider jumping about. I'm guessing the phone is reacting to the TV changing brightness levels as the picture changes but it seems way too sensitive.
Yeah known issue afaik. I'm hoping it gets resolved on an update
rosso22 said:
Is anyone having issues with auto brightness, jumping up and down every few seconds? Im currently sat in a dimly lit room with the TV on and my screen keeps changing brightness levels every few seconds, if I pull down the notification area I can see the slider jumping about. I'm guessing the phone is reacting to the TV changing brightness levels as the picture changes but it seems way too sensitive.
Click to expand...
Click to collapse
One of the fixes in the November update was "Improvements for auto-brightness response in certain lighting conditions.".
I think auto brightness has always been an issue with Pixels. Its a feature I always turn off at this point
rosso22 said:
Is anyone having issues with auto brightness, jumping up and down every few seconds? Im currently sat in a dimly lit room with the TV on and my screen keeps changing brightness levels every few seconds, if I pull down the notification area I can see the slider jumping about. I'm guessing the phone is reacting to the TV changing brightness levels as the picture changes but it seems way too sensitive.
Click to expand...
Click to collapse
Yeah it is up and down like a brides nighty when the light it low on mine, it isn't smooth like it was on my Pixel 5. It feels a bit like the sample rate needs a longer delay because just an increase in brightness on my TV can send my Pro brightness shooting up, the adaptive display needs to wait a few seconds before acting.
MrBelter said:
Yeah it is up and down like a brides nighty when the light it low on mine, it isn't smooth like it was on my Pixel 5. It feels a bit like the sample rate needs a longer delay because just an increase in brightness on my TV can send my Pro brightness shooting up, the adaptive display needs to wait a few seconds before acting.
Click to expand...
Click to collapse
Yeah my pixel 5 and 4a 5G never had this issue (same room and lighting conditions) its crap we have to pay to be beta testers nowadays, guess we will have to wait for another "fix" in next update.
crucialcolin said:
I think auto brightness has always been an issue with Pixels. Its a feature I always turn off at this point
Click to expand...
Click to collapse
Should we really have to turn things off, considering the cost of this phone? Throw in a case and charger and your over £900 in for this phone, everything should work out of the box without having to turn off features.
It's horrible. When I sit at night in a dark room watching TV, it seems to react to the TV and jump all over the place. Never had this on a phone before. Why can't Google get auto brightness right? It's ridiculous.
Personally, I've always preferred Pixel's handling of auto-brightness to that of my recent Note 10+. I thought Samsung's auto-brightness didn't adapt very well (besides the dimmest not being as dim as the Pixel when using in the dark).